directories and drives

Similar Questions

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com

• Question on icloud and drive

  Hello guys, this is my first device from apple so that I don't know much on icloud and drive

  I have the icloud service free with 5 GB with backup works with snapchat and hiking hiking whatsapp, photo library is turned on too which is 2.0 GB

  However I never backed up manually or automatically as my last column 'save' shows EVER, after that the next column said backupsize 1.6 GB

  in the next backupo size it says 1.1 GB, here are my questions

  1] what's the 1.6 GB backup...? I turned only on the backup, I have no BACKUP PRESS button and it was not automatically saved as the last column shows backup NEVER

  2. 5 GB, I have only 3.4 GB of available, I'm pretty sure its related to my 1st request

  I think the purchase of storage icloud, here are a few questions related to it

  a] how is made the backup? I want to say si.jpg is supported today, after a few days when there will be B.jpg C.jpg and so on... will be sauvegarde.jpg again or will he acknowledges in the same file & follow up with those who are not saved, abbr. duplication of files.

  Assuming that I understand your question and the description of the information that you see, the 1.6 GB is the rear size If you choose to save. I have fI recall, auto return until does not start until you have saved actually only once (but can be confused with - its been a while since I created one from scratch.) In addition, automatic back ups occur only when the unit is plugged in, connected to the internet and the screen is off.

  Regarding how the back-up works, it only backs up each time consecutive change and it does NOT keep a delta (i.e. the back only place available for restoration is the last of them, you did. Once you delete data (say a page file), it is deleted the next time the backup device. You will not have many copies of the same file.

  Storage total available iCloud is influenced not only by the back ups, but all the data synchronized if she (Photos and content of the app).

  More than likely, the 5 GB of free space will be meet your needs, at least in the short term. I would wait until you really need additional storage before buy you.

  This might be useful: https://www.apple.com/support/iphone/backup/

• Pavilion g6-1108er: software and driver results for: HP Pavilion g6-1108er Notebook PC

  Software and driver results for: HP Pavilion g6-1108er Notebook PC http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g6-1100-Notebook-PC-series/5082224/model...

  not download the driver on my laptop.

  We were able to find the drivers for your product. Pilots may be developing, so please, check back at a later date or visit the product home page. (c)

  Where can I get the drivers?

  Hello:

  It looks like all the drivers, specifications and manuals are missing from the pages of support again.

  This happened earlier in the week also.

  Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

  Whether the weekend will not help much either.

• HP Pavilion p7-1234: can not find the driver Ethernet HP's p7-1234: not found on the page HP Software and Driver Downloads

  For the life of me, I don't see an Ethernet driver on HP - Software and Driver Downloads page support

  I have collected all the other drivers that I need for a pure Win 7 install, Chipset, video, Audio and WIFI, etc., but not Ethernet?

  I have just the lack?

  I thank you for your time and assistance.

  @harlanopolis

  http://ftp.HP.com/pub/SoftPaq/sp55501-56000/sp55679.exe

  REO

• Is compatible card GPIB-GPIB-USB-B? If so, what card and driver?

  I have my written codes while I was using GPIB-USB-B to connect with HP-4145 of my PC win - XP.

  Now, I want to use a GPIB card instead of the USB version.

  1 - can use a GPIB card without changing my codes?

  2 - If Yes, then what GPIB card (and driver) should use?

  Thank you

  Yes, you can use another card without changing your code. As long as you used the VISA, you can use any desired GPIB controller. If you stay with the GPIB controllers of OR, you can use the same driver, you have now.

• HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  MODEL

  Compaq Presario CQ42-372TU computer laptop

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCac=...

  PLZ ANY BODY HELP ME

  You can upgrade to an SSD.

  The simplest method is to use an SSD as the Corsair Force 3 and don't forget that you buy the kit of migration.

  The migration kit comes with cloning software and a usb to SATA power cable that connects again SSD.

  It is recommended that you purchase and SSD that is approximately 256 GB in quality if you can find one that is affordable.

  SSD with migration in a kit options search I did.

• Age of Empires II - "can't initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  Hello

  I have a problem of Age of Empires 2 running on my new computer. Keeps displaying the following error message: "cannot initialize the graphics system. Make sure that your video card and driver are compatible with DirectDraw. "Someone at - it solutions to this? I have already visited many forums and trying different solutions; None of them helped.

  Tried solutions: change the compatibility and as an administrator, switching to 16-bit color, turn off my graphics card, execution of the extension "nostartup" of the game, looking for old patches from Microsoft (which most are now unavailable due to the game being so old). I KNOW that others have been able to get this game to work on the Windows 7 operating system, but with a few other quirks and I KNOW my video card and driver are more than capable of handling this game. Any suggestions?

  System Specs:

  System manufacturer/model number Dell/Studio 540
  Operating system windows 7 home premium 32 bit
  6 GB of memory
  Graphics card ATI Radeon HD 4350
  Monitor (s) displays Reference Dell ST2410

  Thanks in advance,

  EP

  I had the above problem with AOEII:Age of the Kings. My brief spec is Windows 7 Ultimate edition (SP1) and a card nVidia 8600 GT. I did the following (make sure you reboot after each installation):

  Make sure that you are running the latest patch of AOEII:AOK (2. 0 a):

  http://www.Microsoft.com/download/en/details.aspx?ID=35

  Download and install the latest version of DirectX:

  http://www.Microsoft.com/download/en/details.aspx?ID=5264

  Download and install the latest nVidia Driver suite. I left the autodetect my card software and reset all my default settings. I also installed the full software suite:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Finally, right click on the shortcut of AOE and click Properties. Click on the Compatibility tab and select the following:

  -Run this program in compatibility mode - choose Windows XP Service Pack 2 (!) NOT 3!)
  -Disable visual themes
  -Disable the Composition of the Bureau
  -Run this program as an administrator

  One of the above options maybe work on its own, but that's what I had to do to make it work and I tested it after each step.

  Good luck!

• Age of Empires 2: Age of Kings does not work on Windows 7. The error is: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  I can't get my Age of Empires 2: Age of Kings drive on my computer.

  It gives me the error message: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  What exactly is DirectDraw. and how can I make my video card and the driver compatible to it. I already tried to uninstall and reinstall the drive.

  Help, please!

  What kind of graphics card you have and you have the latest DirectX and video card drivers? If this isn't the case, update them.

• Move a tree of directories, including all directories and files to a different location to Robocopy

  Original title: Robocopy

  Hello

  I want to make a directory tree, including all directories and files to another location, but keep the last part of the sourcepath directory

  Robocopy \\server\share\sourcepath \\server\share\destpath *. * / S/MOV /COPY:DAT - ok, but retains the internal directories

  Robocopy \\server\share\sourcepath \\server\share\destpath *. * / S/MOVE /COPY:DAT - ok, but also moves sourcepath. I want to keep this directory

  Robocopy \\server\share\sourcepath \\server\share\destpath *. * / S/MOVE /XD sourcepath /COPY:DAT - /XD has no effect, same as above

  Is there a way I can move all of the files and directories within the \sourcepath, but to keep the sourepath directory?

  Kind regards

  Sonny

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Printing banners and driver problems

  I have recently updated the genealogy stuff and wanted to print it on a multi page banner.  I have 2 HP printers Photosmart 5520 and P1102W laser printer and neither seem to give the possibility to print a multipage banner.

  After a search, it was suggested by someone that the driver for the Deskjet 6980 would work on the 5520 however I can't find to downoad anywhere.

  I have a macbook OS x 10.8 running and everything say, the option to upgrade drivers via the software update feature, but saw that I do not currently have a deskjet 6980 so I can't get the upgrade (even the HP site for the driver does not seem to have a driver to download)

  Is there a way to get a updated software for all printers that I have who would let me print a banner or get a compatible driver that will be?

  Seems a bit odd that the printer I've had 15 years ago I would like to print banners, but these new ones don't

  In any case, I hope that someone can help you

  Best regards

  Scott

  Hello scm256. I understand that you meet, banner printing and driver upgrade issues.

  In regards to printing banners, only our printers high-end are almost guaranteed to possess this ability. I'll post the specs of the two printers, so you can review the types and sizes of paper supported:

  Photosmart 5520: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5157533&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03241207-10%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  LaserJet P1102W: http://support.hp.com/us-en/document/c01999607

  With regard to updating drivers, you probably experience that printers you have lack of updates of the pilot at this time, especially an older printer as the Deskjet 6980. In addition, it will probably be an update of the banners for all printers print driver that does not initially support.

  Please let me know if you have any questions or concerns. I'm only here to help!

  Mario

• I use Director and I got about 100 picture in my project and I want to bring up more time on the screen when reading it.

  I use Director and I got about 100 picture in my project and I want to bring up more time on the screen when reading it. I know you can do induvdually but I was wondering if there was a way to select all and then make the longer time for each of them. Help, please!

  original title: NEED HELP Please REPLY as soon as POSSIBLE. Windows movie maker question

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
  main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker help & how-to and Forums are good sources of information:

  Windows Essential - Movie Maker help
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center?T1=T3

  Answers - Windows Essentials - Microsoft Windows Movie Maker Forums
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=threads
  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• at startup, I mesg.drive get 1 not found serial ATA, SATA2 and drive 3 not found parralell ATA, PAT-1 (PRI IDE SLAVE)

  at startup, I mesg.drive get 1 not found serial ATA, SATA2 and drive 3 not found parralell ATA, PAT-1 (PRI IDE SLAVE)

  Hi waynehile,

  1. are you able to boot into Windows after the error message?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  Usually, this would happen if the hard drive is not set correctly in the basic input/output system (BIOS) or the settings in the basic input/output system (BIOS) are incorrect.

  Basic input/output system (BIOS) is a program built into personal computers that starts the operating system when you turn on your computer. It is also referred to as system firmware. Basic input/output system (BIOS) is part of the hardware of your computer and is separate from Windows.

  For more information about the correct settings in the BIOS of your computer and how to check and change these settings, see your computer documentation or contact the manufacturer of your computer.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• I have no sound. All the updates and driver controls show "device working properly.

  All the updates and driver controls show "device working properly. When the sound icon is clicked - I see the sliding green scale showing "audio output". I also see the green bar moving on 'Realtek HDMI output' and it is marked as default. Our sound stopped suddenly without reason is apparent. Any help is appreciated.

  When I go to check microphone/video on attached USB camera/mic - I see the two audio and video movement for this device. The computer makes the numbers / noise I just can't hear it.

  Realtek High definition driver is 6.0.1.5789.

  Change the sound Realtek HD audio no audio HDMI

• I have 2 accounts directors and 1 standard account on my computer, it will slow down the speed of the computer

  I have 2 accounts directors and 1 standard account on my computer, it will slow down the speed of the computer, or if I have just 1 Administrator account it will make computer run faster

  N °

  Unless you are logging in to each account and switching between them - have each user run a lot of things.  Now * that * could slow down the computer.

  Otherwise, it's just - unused accounts unless you connect to them.  Again, storage space and unil you get below a few GB of free it - not no more worries.