Directory structure of different drivers

I have different instruments and creates screws for these instruments to support custom functions. These screws will then serve as subvis to create the application. Say it's DMM, scope and the power supply. Will be to create their own llbs (a llb for DMM, a Bachelor of law of importance) and an llb from feeding and keep these llbs in their own separate folder; Create any problem link when the application is created? Application can call DMM screws and scope screws as subvis. Or all llbs (DMM llb and llb scope power supply llb) must be located in a single folder?

How can I possibly say? You asked if there would be a problem if you put them in different folders and I said you can.

I would avoid to place custom code in the instr.lib file. Install a new version of LabVIEW does not alter the existing installation.

Tags: NI Software

Similar Questions

  • Standby Redo logs and the Directory Structure in the Backup Site

    Hi guru

    I just want to confirm, I know that if the directory structure is different, I need to talk about these 2 settings in the file pfile

    on the main site:

    DB_CONVERT_DATAFILE = 'sleep', 'primary '.

    LOG_CONVERT_DATAFILE = 'sleep', 'primary '.

    On the secondary Site:

    DB_CONVERT_DATAFILE = 'primary', 'sleep '.

    LOG_CONVERT_DATAFILE = 'primary', 'sleep '.

    But I want to confirm this weather I have to deliver the full path of the directory in the two paramtere above:

    as:

    DB_CONVERT_DATAFILE = ' / u01/oracle/app/oracle/oradata/sleep ', ' / u01/oracle/app/oracle/oradata/primary.

    LOG_CONVERT_DATAFILE = ' / u01/oracle/app/oracle/oradata/sleep ', ' / u01/oracle/app/oracle/oradata/primary.

    Second Confusion: -.

    After that transfer standby Redo logs creates primary and made to sleep on the foregoing, mentioned the directory structure and after restoring the alongwith primary db backup, that ensures the control file will not affect the journal of physics again placed watch on the above mentioned location.

    Thanks in advance for your help

    vk82 wrote:

    In fact, I create the day before by using the RMAN Duplicate command. but where I am confused is the point if I transfer the backup that i taken the pri on the C:\backup_files path. and after that, I transfer the backups to the waiting on C:\backup_files. After that when I restore it will create datafile and other stuff in another directory I mentioned using DB_FILE_NAME_CONVERT as LOG_FILE_NAME_CONVERT. I think Yes but need your advice during the same period.

    Hello

    Yes, files should be created under the directory mentioned in the path of the parameters 'db_file_name_convert' and 'log_file_name_convert.

    Kind regards
    Shivananda

  • BlackBerry App Directory Structure

    Team,

    Need help on the application directory structure

    I have (New to Java development) have set up a directory as below because the memory use of resources and structure

    Example of application

    | _ src

    | Private (data files)

    | _components (library)

    | _Screen (all the screen of the user interface and business logic)

    | _res

    | _img (image files)

    But many of my reviewers code suggesting a different as directory structure below

    Example of application

    | _src

    | PRIVATE

    | _components

    | _Module name 1

    | _helper

    | _Controller

    | Name _Module 2

    | _helper

    | _controller

    | _res

    | _img

    I think it's the second approach consumes much space and a good change that increase the size of the app

    guess the size of the app is limited to 13MB

    SUMMARY - http://supportforums.blackberry.com/t5/Testing-and-Deployment/The-maximum-size-of-a-BlackBerry-smart...
    ication/ta-p/502534

    Please suggest what directory structure I should go

    Let me know opinions and thoughts

    Concerning

    I would consider the file resources database.
    otherwise, it looks good, but consider using names significant package

  • Mobile Directory oracle to different physical devices causes a fatal error

    Hello

    I moved the folder integer oracle (in my case, it includes all oracle related files: directory of executables and 'oradata') to a different physical device. After mounting the new physical location even device of the directory, oracle starts but does not give me later ' ksedmp: internal or fatal error ' and ' ORA-00600: internal error code.

    (About the steps that I followed)

    -closing of the database (completely /etc/init.d/oracle stop - all processes have disappeared)

    -copy the directory structure (from / dev/hda1 to/dev/hdc1)-files at this location are identical after the copy

    -replace the/dev/hdc1 at the same place (/ home/oracle)

    -Start oracle

    -the DB starts and works of a great extend but trace and log alerts present FRAME of stack/trace dumps and unpleasant mistakes

    -Oracle version: 10.2.0

    I checked the size of the physical block on both devices (using/dev/hdc1 dumpe2fs | grep-i "s block") and it's different: 1024 on hda1 and hdc1 on 4096

    Issues related to the:

    -is the above mentioned block size the reason things don't work? If so, is there an easy solution?

    -If not, so what's the problem?

    -Yes, I know that I can export the entire database and re-import them on a different device, but thought I should be able to skip this step if I simply want to swap hard drives

    d ' other suggestions are welcome

    Thank you and best regards,

    Filip

    -to copy I used 'cp - r Pei source dest' - r is recursive is Pei o maintain the same permissions and ownership of files.

    I wouldn't be so sure that you reproduced successfully your devices. Are you using symbolic links? If so, that you converted symlinks to files they point out (source). You should be able to reproduce two complete directories using cp - av, however, I prefer to use the following, assuming that you mount the new drive under/mnt/hdc1 and that you want to copy everything under/U01, so you can later mount/dev/hdc1 under/U01:

    mkdir Pei/mnt/hdc1

    mount/dev/hdc1/mnt/hdc1

    CD/U01

    tar - cf-. | (cd/mnt/hdc1; tar - xf - sync)

  • You can specify the directory structure?

    Is there a place within the Muse to specify the directory for the project structure? For example, I created pages for an existing web site that has already implemented directory structures. It would be good to specify the location to put images and can have subdirectories for the uses of the different image (i.e. put slideshow images in their own directory).

    Initially, what brought this question, is that our server admin wants specify me a custom jquery script directory. Muse the scripts/1.1 by default. We want to specify a different location.

    I realize that I can change the code after export, but it would be better to be able to specify these things in advance to avoid her need to change the code every time there is an export.

    Any place to do?

    Thank you.

    Hello

    I'm afraid at this point, it is not possible to have the directories specified in the Muse. Please present this as a feature request in the ideas to the point here, http://forums.adobe.com/community/muse/ideas

    Kind regards

    Abhishek

  • Cache directory structure

    I clear my Cache on a regular basis (at EACH stop, at least). I know and use the "browser.cache.disk.parent_directory" Cache location setting

    Is there a setting to return to the 3.6 Cache Directory structure?

    I feel no questions slowing down access to the Disk Cache, and I liked the unique directory structure.

    N ° this new structure was created to allow more and more large files to be cached, and to overcome the limits of the cache that is used in older versions of Firefox.

    • Bug 597224 - HTTP Cache: use the directory tree to store cache files
  • cover the existing connections expanded directory structure

    Hi all. I am merging two iTunes use directories of media on a much larger storage than before.

    The directory more recent, that I used on my MacBook Pro for many years, is full of AAC files.

    The directory is older, that I use for backup, is filled with many files exact same song in Apple Lossless format.

    What would be the best way to merge these two directories, paste all Apple Lossless to AAC files existing files?

    Of course, I don't want to open the directory structure down to the individual files and do it this way. I want to be able to put all the old structure on top of a more recent and have it automatically determine where to put what.

    I experimented and discovered that when the files in Lossless format paste AAC files, iTunes keeps all the metadata and uses just that the Lossless files as if they were the same.

    I have already asked the hosts to move this topic to the iTunes for the Mac community, where more experienced den iTunes users and can help you.

  • Directory structure

    I just created a network for Q4 version Installer.  We have developers, full and debug licenses.  DVDs were copied on the hard disk of the computer of the VLM.  When I created the Debug configuration, the installer of network reported the DVD should not be changed and copy them directly.  Once you have completed the installed network, it does not create the directory structure similar to what the help file below shows.

    LabVIEW 8.0
    \_SourceFiles
    \Fourth floor engineering
    \Client
    vlmclient.exe
    other files
    Setup.exe
    Group \Applications
    \Client
    vlmclient.exe
    other files
    Setup.exe

    Figure 1. The network installation directory structure

    I was expecting

    LabView 8.6

    \Source files

    \Debug

    \Client

    vlmclient.exe

    Setup.exe

    Only the \DISK1, the \DISK2, the \DISK3, the \DISK4 have been created.  The vlmclient.exe has not been created.

    Paul


  • Change the Directory Structure created in the MPZIP file

    I'm trying to normalize my projects of Multisim for inclusion in our documentation control system. As I build my project, I have a directory structure that I use. When I include the files in the project, the directory structure is known in the MPZIP file. However, the default value is decompress all the files in the external folder (name of the project). Suite to help,

    Hi Doug,.

    When you unpack the project, the default is to create a new folder and put it all together because it is unlikely that the new computer will have the same file structure as the computer on which this project of.  If you want Multisim to create the same structure as the original file, you can click in the cell under "excerpt from path" and select the old path, if the folder does not exist, Multisim will create a.  Unfortunately, you will need to do this for each item on the table.

  • Audio files to blackBerry & Smartphones Directory Structure

    I have my BB Storm hung like a USB device. I have several lecutures and classic
    I want to keep on my BB for listening to music. I drag and drop it from my desktop computer
    for the BB directory \Music

    The structure of directory on my BB when I go to media > music seems to be:
    All the songs<== all="" my="" audio="" files="" are="" here="" as="" audiotrack="" 01,="" audio="" track="" 02,="">
    Artists
    Albums
    Genres
    Playlists
    Musical sample

    The directory structure such that it appears on my Windows desktop:
    G:\Blackberry\Music\Bach
    \Beethoven
    \Misc

    My questions are:
    (1) how can I move files from my desktop to the BB in a dirctory structure that will make sense as soon as they are on the BB?
    As it is now, just gets thrown into "songs".
    (2) is it possible to rename the files on the BB, so I can tell apart them?
    (3) how create a directory named "Conférences" on the map of support BB?

    (1) and 3) you can access all that using the media browser.
    Screen homepage > Media > menu > Explorer

    2)
    for the regular application of the press: there is nothing of file because filing is done with the ID3tags (info on the files meta). So, if you want to be able to distinguith files, you must set the info in there. Which is easily achievable for the songs to MP3 using Mozilla SongBird or using the tag & rename or iTunes for example.

  • Recommended the Directory Structure of shared storage for deployment of enterprise on Windows environment

    Hello

    I need to install FMW on windows with high availability environment using the storage that is shared in the following way:

    3 windows 2008 R2 servers servers:

    Host1 (Server Admin): gale servers (Server Admin) and EM

    host2 (content 1): wecenter content: servers eats ( COE, WCCUI, IBR, CAPTURE)

    host3 (content 1): wecenter content: servers eats ( COE, WCCUI, IBR, CAPTURE)


    Host3 will be Host2 high availability on each managed as cluster based server


    the question is how to design the structure of directory on windows environment, I need best practices

    I found in the Linux directory structure "Enterprise Deployment Guide for Oracle WebCenter Content" as follows:

    So how do apply on windows

    fmwds.png

    Hello

    Thank you! All the best. Be careful in choosing to shared storage.

    # If your shared file system accessible via CIFS, SMB or Samba, you may search and/or performance indexing and corruption problems when you use the Verity search engine (not supported in 11g).

    # If your file system shared accessible via CIFS, SMB or Samba, you should disable opportunistic locking (oplocks - data client-side caching) of the file system as it might interfere with the normal operations of Content Server. With solutions for storage network (SIN), the performance of the file system may be closely related to oplocking (data caching client-side), which disables the opportunistic locking can cause performance problems. Please plan your architecture accordingly.

    Please feel free to correct if you get your answer to other purposes.

    Thank you

    Amey

  • The directory structure and using the correct syntax when using models of liquids and 'include '.

    Hello

    I have the following on my directory structure question when I want to use models of liquids with 'include '.

    If I place i.g this code on a model liquid 'layout - test.tpl ".

    {% include 'head' %}

    < section >

    {% block content %} {% endblock %}

    < / section >

    {% include %} 'footer'

    The models will appear without understands it. (On my desk works okay, because that the code compiles through "interprets" and will be shown in plain HTML.)

    Directories look like this (within the section of the administration console developer):

    Page layouts

    -Custom

    -includes

    ... header.liquid

    ... footer.liquid

    -models

    ... layout - test.tpl

    Obviously there is something wrong with my code to work in British Colombia.

    The main question is, what is the correct syntax to make it work?

    Thank you

    Kind regards

    Carla

    You can use no mixing to compile BC locally. BC is SAAS - Software as a solution, and you cannot compile it and its data locally. Simple as that really.

    You can use several file extensions to include in British Colombia. A common set of community is Inc. includes, .tpl for models, for example.

    I think the essential lack of your property is your liquid not application of the BC, your use of the syntax is incorrect and you try to develop locally which you will not be able to do.

  • Copy of complete site. I have a Web site. I would copy the entire site (complete with images) to another directory with a different name. Then, transfer to another hosting server. All ideas

    Copy of complete site. I have a Web site. I would copy the entire site (complete with images) to another directory with a different name. Then, transfer to another hosting server. Any ideas?

    Not sure that you need a different directory.

    If you are working on a local computer, create a new site with all the same settings for local files and change the remote server settings to match the second server.

    This ensures you that there is no difference between the two websites.

  • How can I LR 6 to 5.7.1 directory structure?

    On my PC LR 5.7.1 still starts automatically when I put a card in, not 6.0.  Some time after a case where 5.7.1 started, I made a few changes to the directory structure in 5.7.1.  These changes do not appear in the instance of 6.0/CC LR.  How can I fix it?

    I don't see this option, if it was offered.  Based on other posts not in this thread, however, this solution seems to work:

    1 //In LR 6 on W7 - 64 / /: file | Recent opening. {Choose lrcat LR 5}; LR runs a script and update the LR 5.n.n .lrcat to 6.

    Note: output and authorization LR 6 update its catalog is no not cela the default catalog when opening.

    2 edit | Preferences | General |  Default Catalog\ when starting use of this catalogue. {Select the highest n catalogue Lightroom in the list, i.e. the catalogue Lightroom - 2.lrcat}

    Closing and re-opening LR sometimes indicate that the catalog is now defined.

  • LR 4 - Import - Directory Structure

    I use the following directory structure:

    2010

    2011

    2012

    01

    02

    Imported on date y

    03

    imported to date x

    imported date x 2

    imported date x 3

    With LR 2, I simply pointed at least correct dir (i.e. 03) and then let it import.

    The last directory called "2012-03-07"

    When I try the same operation to import LR4 I point it to the directory 03 and it then creates a dir '2012' inside the dir 03, then a subdirectory inside this resp.

    Is it possible to change this behavior?

    Uncheck the little box next to the 2012 does not work.

    Import into, by cutting the LR4 dir files and sticking them in the structure correct dir, removal of the LR4 library files and then import the files into place in the correct location works.

    Even better is just all imports through LR2 in a fake catalog.

    What's wrong with a simple dialog box indicating "Import at this place until what I otherwise directs?"

    Any suggestions?

    Just found the answer.

    Import dialog page has a drop down in the right pane that allows you to specify the structure of the files created at time of importation.

    In my case it was set at 2012/2012-03-07

    This creates a structure of two level dir year-round as the the top level dir.

    The drop-down menu you propose other options to date, including a simple 2010-03-07.

    The problem is that this rocker of the option is not visible when deep in a directory structure.

    Works very well after changing the default value.

Maybe you are looking for