Disable/remove Anyconnect mobile on SAA license?

Similar Questions

• AnyConnect mobile license, help

  Hello

  I'm a little lost with licensing

  I have an ASA 5510, and I would like to be able to use mobile devices (Android/iOS) with anyconnect.

  See below my "sh worm":

  ================================

  Cisco Adaptive Security Appliance Version 8.2 software (1)

  Version 6.4 Device Manager (9)

  Updated Wednesday, 5 May 09 22:45 by manufacturers

  System image file is "disk0: / asa821 - k8.bin.

  The configuration file to the startup was "startup-config '.

  api03 - in 29 days 4 hours

  Material: ASA5510, 512 MB RAM, Pentium 4 Celeron 1600 MHz processor

  Internal ATA Compact Flash, 256 MB

  BIOS Flash M50FW080 @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)

  Start firmware: CN1000-MC-BOOT - 2.00

  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03

  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.04

  0: Ext: Ethernet0/0: the address is 0022.90fe.14c4, irq 9

  1: Ext: Ethernet0/1: the address is 0022.90fe.14c5, irq 9

  2: Ext: Ethernet0/2: the address is 0022.90fe.14c6, irq 9

  3: Ext: Ethernet0/3: the address is 0022.90fe.14c7, irq 9

  4: Ext: Management0/0: the address is 0022.90fe.14c3, irq 11

  5: Int: not used: irq 11

  6: Int: not used: irq 5

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 50

  Internal hosts: unlimited

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 0

  GTP/GPRS: disabled

  VPN SSL counterparts: 50

  The VPN peers total: 250

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes a basic license.

  ================================

  My cisco contact told me: 'you must only ASA-AC-M-5510.

  can anyone confirm? I would like to be sure before buy you.

  Best regards

  Nicolas

  Yes, that is absolutely right.

  Since you already have the AnyConnect Premium license for 50 users (SSL VPN peers: 50)

  , then to connect mobile devices, all you need is the ASA-AC-M-5510.

• Installing AnyConnect Mobile licenses

  I want to clarify how exactly a Cisco AnyConnect Mobile license is applied to an ASA. Does as a PAK and then a license key is created? Y at - it a separate to enter specifically for the mobile command?

  The mobile license was delivered as a PAK who was converted into a license key.

  But today, you buy the mobile license more, instead you buy 4 AnyConnect more or APEX which includes the mobile service.

  If you already have Essentials or premium, you can get the license migration until the end of the year.

• AnyConnect Mobile license

  Hello

  I have 2 questions about the mobile Anyconnect license?

  1. Why is there a mobile separate license for mobile devices for SSL VPN on an ASA firewall in addition to the regular essentials license, but when using the SSL VPN on the latest IOS routers, that a license is required? (I can connect to the IOS router with our mobile devices without error message)

  2 is supported for setting up Cisco IOS ssl vpn on demand router? (Trying to implement access remote jabber)

  1. it is a business of Cisco and just something we implementers should work with. For what it's worth, AnyConnect 4.0 is licensed differently and do not require a separate mobile license.

  2. I don't know about that one.

• Question about the license of Cisco's AnyConnect Mobile

  Hello

  I was reading on anycconnect, and I have a doubt,

  Do I need Cisco AnyConnect mobile license if I establish a vpn with the ASA windows desktop using the anyconnect client?.

  or these licenses are needed only when I use anyconnect on mobile platforms (iphone, ipad, Android)?

  hope someone clarify this point for me,

  Kind regards

  Juan Pablo Hidalgo

  It is useless to AnyConnect Mobile licenses for users who connect from a Windows desktop computer. These permits are only required for users with mobile platforms.

• AnyConnect Mobile and Premium SSL free licenses

  Hello

  I currently have a pair of ASA5510 HA, if I understand the 2 free premium licenses can be used by the mobile client, as long as the ASA has the license for mobile clients?

  Can someone confirm that my interpretation is correct, or I have to buy a separate license to the premium one long with the license mobile client to enable this feature?

  Thanks for your time.

  Hello

  That's right! I did the same action on an ASA5505. In this case, you only need the anyconnect mobile license.

  Please mark answered for useful messages.

• Configure AnyConnect (Mobile) on ASA5505

  I found some tutorials and guides on how to Setup on an ASA5505 AnyConnect, but I wanted to check before to make sure I was going to the right direction.

  Installation program:

  I have a very simple installation and the basic objective.  I have currently just a laptop on my ASA5505 E0/1 and then the ASA is configured with a static IP connected to the Internet.  I have ASA correctly configured and you can browse the web through the laptop.

  I also AnyConnect and AnyConnect Mobile licenses as well.

  Objective:

  I want to configure on the ASA5505 AnyConnect and simply to establish a successful connection to a device mobile android running AnyConnect necessary software on the market.

  ===========

  There are plenty of guides for specifc set ups, but as described, I want to keep it is as simple as possible.

  It would be a good guide to complete this?

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080972e4f.shtml

  Also, I am more comfortable with the CLI. Is it easier to use the ASDM Assistant for this?

  Thanks in advance.

  Hello Joffroi,

  Please check the question as answered so future users can learn from your own resolution

  Kind regards

  Julio

• Can't disable/remove user guest - El Capitan

  I'm on a late 2013 iMac 21.5 inch El Capitan running.

  I can't disable/remove a user account called. The minus sign "-" is grayed out.

  It seems that this "guest user" account is also that stop me to upgrade to Sierra but that's another topic.

  Thanks for any input.

  

  I have exactly the same on all my systems regardless of the version of the OS. It's normal. This account is owned by the system, so you cannot remove it. It will affect your facility Sierra as there has been no impact on me.

• Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 firefox browser. You want to disable/remove the navigation bar. Pls Hlp

  Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 version of the Firefox browser.
  I want to disable/remove the navigation bar of the browser window, making the browser works like the kiosk mode.

  Help, please

  Thank you
  Vishal.

  your profile folder is a subfolder of C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\ and something like < randomstring > .default label - folder chrome with the userChrome.css file must go in this folder .default < randomstring > .

• Talk does not: how to disable / remove languages?

  'Talk' is false.

  iPhone international settings are: English, French, and Japanese.

  However. sometimes in the Messages, for example, for reasons 'Speak' Japanese bed like Chinese...!

  And the Japanese text is clearly Japanese... (for example, it contains pure-Japanese hiragana).

  Chinese is nowhere in my settings, the text is clearly Japanese, how to 'speak' speak Chinese?

  Is there a way to disable/remove no matter what the "smart text recognition" Chinese / accessibility / talking about options?

  Go to settings > general > language and do, of course, that Japanese is higher Chinese on the list.

• How to disable, remove or uninstall Windows Media Center of Windows 7 Home Premium more.

  How to disable, remove or uninstall Windows Media Center of Windows 7 Home Premium more.

  You can go in Panel, programs and features and functionality in Windows
  on and outside. I think you have to turn off the Media Center and Windows
  Media Player. As indicated, you will not be able to remove the bits that are
  part of the operating system.
   
  On Wednesday, May 19, 2010 14:29:23 + 0000, randy g simmons wrote:
   
  > How to disable, remove or uninstall Windows Media Center of Windows 7 Home Premium more.
   

  Barb Bowman www.digitalmediaphile.com

• How to disable/remove unwanted in ISE 1.1.1 language models

  We use the portal Sponsor/comments of EHT function.

  We have customized the English language model by default.

  But we do not want to translate/customize all models of default language.

  How can I disable/remove unwanted models? (The button Delete is disabled for them)

  Our users would be able to select models that are not customized.

  Hello

  You cannot remove default language models.

  Thank you

  Sent by Cisco Support technique Android app

• Blocking of the iPads via AnyConnect on the SAA?

  Someone at - it successful blocked AnyConnect VPN by iPads?  I can see how you can block the client IPSEC pre-installed by the IPSEC client rules, but I don't see how I can block an iPad or iPhone if they have installed the AnyConnect Mobile client.

  The release notes for 2.4 Anyconnect for iPad have a section on how to do it. You must use a dynamic access policy to test the operating system.

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect24/release/notes/RN-AC2.4-APL4.2.html#wp1095241

• Deleting files from Archive CC - cannot remove the mobile creation error

  I am trying to clean my cloud storage because I have reached my limits, but it does not remove anything without having the error "failed to remove the mobile creation."  I get this error regardless of what file I'm trying to delete.  I don't know what it is or how to fix for free space on my drive of cloud.  Help, please!

  @nicoleb16277652 - you have a large number of items in the Archive tohttps://assets.adobe.com/files?filter=archive https://assets.adobe.com/files?filter=archive: 2355 files and 1 folder. I am currently getting a list of complete metadata that you have stored but didn't notice the Lightroom Catalog files. You should not use the current CC site for backup Lightroom catalogs.

  We can permanently delete all items in your Archive if that's what you want. Let us know what you would have done as. If necessary I can you email a complete list of what you have stored. My email is [email protected].

  Lightroom and Creative Cloud FAQ at https://helpx.adobe.com/lightroom/kb/lightroom-creative-cloud-faq.html#id_9994

  Can I keep my Lightroom Catalog in the 20 GB of storage space do I get with my membership creative cloud?

  No, you cannot store the Lightroom catalogs in the creative cloud, and you can save a Lightroom catalog on a network drive. You must store the Lightroom catalogs on your computer or on a hard drive connected locally.

• Remove the Mobile (jqm) User Interface

  I'm on Apex 4.2.3

  I created the mobile UI in one of my applications. By default, he created the global page 999 and 1001 login page. I want to remove the mobile UI but constantly hit an error: "a UI only can be deleted when there are no pages associated with the user interface.". What happens even after I removed the global 999 and 1001 connection. Can someone help please...

  HI - this can be a great help, but you could check actually have removed all mobile pages, global mobile incl., mobile login page page and global home page? I just tried to reproduce your problem on apex.oracle.com and had no problems. I have create a new desktop application with, and then added a mobile UI, which included mobile, global connectivity and home pages. Which I removed then one by one, and after that, I was able to successfully remove the mobile user interface,

  Kind regards

  Marc