Disable the addition of * new * miniatures

Similar Questions

• Disable the search for news in the Iphone

  Is there a way to disable the news listing in the iOS which appears when you enter the menu to search for your iphone? (forgive me if my terminology is inaccurate: I am referring in the menu that appears when you slide the screen down, or move to the screen on the left in the iphone) Currently, there is only the possibility to disable the 'News' application, but I'm not aware of any possibility to remove new research in the search menu.

  Thank you

  Hello

  I also had this issue. After some googling I discovered the solution: go to settings > general > Spotlight search. A huge list of apps is listed here under "Search results" and new is one of them. You can press the switch to turn it off.

  I hope this works for you and answer your question!

• How to disable the additional noise filter when you use a Lifeproof subwoofer

  I have a 6 s Iphone now with a case of Lifeproof! I was told there is an option of noise or a filter to turn off so that people

  agree on cell?

  Thank you

  Gary

  You have the Lifeproof who says that it is for the 6/6s on the box? Or do you have one that says just the iPhone 6? If you have one that was planned for the iPhone 6, it won't work properly as it covers some things, that he should not.

  You can try to disable the noise suppression. Settings > general > accessibility > telephone noise cancelling.

• How to disable the search field new tab?

  One of the recent versions of Firefox (31?) presents a search box on the new tab, on the speed dial thumbnails. How can I disable it? It of a really poor layout, takes a lot of space, overwrite thumbnails for platforms.

  Here's a UserStyle to hide this search page newtab container.
  https://userstyles.org/styles/103765/FX-31-about-newtab-hide-the-search-bar

• How can I disable the notifications of new CNN?

  Since I upgraded my iMac to El Capitan I received notifications of banner in the upper right. It doesn't bother me when I hear about the updates of the computer, the e-mails and things of this nature. However, I despise the work offline and suddenly have some headline news obnoxious suddenly pop up on my work. I want to see the news, I will go online and watch, not pushed him into my throat. Unfortunately, the only settings I can find in the notifications turn off everything. I don't want to turn off ALL notifications, just the invasive CNN newsfeed. Is there a way to do this?

  If you're using Safari, go to Safari > Preferences > Notifications and CNN set to "deny".

  If you have installed a CNN application you should be able to control if just that app provides notifications in system preferences > Notifications, select the application on the left (assuming that it is registered) and adjust its parameters using the checkboxes on the right.

• Deliver the addition of new set of switches stacked as an extension to the network in another data center building

  Hello

  I was wondering if someone can help me, I am a humble sysadmin with no real network admin training.

  I have the following Setup to work in a rack in our data center.

  2 x Dell Sonicwall NSA2400
  2 x stacked switches Dell Powerconnect N5524

  A Sonicwall is connected to each switch (active-passive)

  Every Dell server has 2 x nics in servile failover mode, one of each network card connected to each switch

  This is done to allow a full redundancy for network, cable, switches and Firewall interface cards. It works well.

  The above mentioned rack is now full and we ordered a new rack that is in a different datacenter of construction on the same site. We decided to buy another set of stacked switches and _extend_ (no battery) these via optical SPF on the rack on the other.

  The idea is that we still have the switch fault tolerance but link to two grids through 10 GB. The new switches are 2 x Dell Powerconnect N2048 and have been implemented stacked with any connected devices.

  I have implemented SPF ports on both switches to be a junction ports and connected the two sets of switches, unfortunately our site went offline, our alert went ballistic and no servers could not talk to each other!

  Quickly, I unplugged the new switches and after a worrisome 10 alerts deleted seconds and the site is back online.

  I don't know why this has happened and reflected on the STP parameters that my googleing seem well. I don't know I'm missing something basic.

  I'll post a framework and a diagram in a follow-up post

  Which is no doubt tree covering the shot weight. It is a good idea to assign lower priority to the main switch. Generally, your root switch will be the one that plugs into the firewall. Definition of priority on the main switch to 4096, it will make the root switch. So as you work your way through different layers of the network, increase the priority. Access layer switches can be left by default.

  I would also check the physical connections for loops. In situations where you have multiple connections switch, make sure that these ports are configured in a SHIFT.

  Keep us informed.

• Help with the addition of new section (extension) to the report

  Hello:

  I need to check my VCs and collecting information on their versions and ESXi versions and version numbers under them.  I wrote a script (see below) that does exactly what I need, but only for 1 (one) VC.

  I can't understand how to add additional venture capital of the report information and make sounds too good I have to one.

  Ideally, I want to use Import-Csv and import all my name of VCs from the file.

  
  

  Any help would be really appreciated.

  Thank you!

  
  

  Here is my script:

  Se connect-VIServer "vcenter1"

  Get-data center | `

  Tri-objet -propriété nom | `

  ForEach-Object { }

      $Datacenter = $_

      $Report =  "" | Select-Object VC_Name, $vmhost, VC_Version and cluster_name Host_Version

        $Report . VC_Name = $defaultVIServer. Name.Split ('.' ) )[0]

        $Report . VC_Version = $defaultVIServer.version + '_' + $defaultVIServer.build

        $Report

      $Datacenter | `

          Get-Cluster | `

        Sort-Object -Property Name | `

  ForEach-Object { }

          $Cluster = $_       

          $Report =  "" | Select-Object VC_Name, $vmhost, VC_Version and cluster_name Host_Version

          $Report . Cluster_name = $Cluster. Name

          $Report

              $Cluster | `

            Get-VMHost | `

  Tri-objet -propriété nom | `

  ForEach-Object { }

              $VMHost = $_

              $Report =  "" | Select-Object VC_Name, $vmhost, VC_Version and cluster_name Host_Version

              $Report . VMHost = $VMHost. Name . Split ('.' )[0]

                    $Report . Host_Version = $VMHost. version + "_" + $VMHost. build

                    $Report

  }

  }

  } | Export-Csv -Path C:\Users\test.csv NoTypeInformation - -UseCulture

  Try like this

  $report = @)

  Cvnames.csv Import-Csv - UseCulture | %{

  SE connect-VIServer $_. VCName

  $row = "" | Select-Object VC_Name, cluster_name, VMHost, VC_Version, Host_Version

  $row. VC_Name = $defaultVIServer.Name.Split('.') [0]

  $row. VC_Version = $defaultVIServer.version + '_' + $defaultVIServer.build

  $report += $row

  foreach ($datacenter in (Get-Data Center |)) Sort - Object - property name)) {}

  foreach ($cluster in (Get-Cluster-location $datacenter |)) Sort - Object - property name)) {}

  $row = "" | Select-Object VC_Name, cluster_name, VMHost, VC_Version, Host_Version

  $row. Cluster_name = $Cluster.Name

  $report += $row

  foreach ($vmhost in (Get-VMHost-location $cluster |)) Sort - Object - property name)) {}

  $row. VMHost = $VMHost.Name.Split('.') [0]

  $row. Host_Version = $VMHost.version + '_' + $VMHost.build

  $report += $row

  }

  }

  }

  Disconnect-VIServer-Server $_. VCName-confirm: $false

  }

  $report | Export-Csv-path C:\Users\test.csv - NoTypeInformation - UseCulture

• How to disable the additional information next to the pointer (not the ' Extras') → photo

  Sometimes it gets in the way, so I don't want to disable it if necessary:

  

  

• Crash of project files after the addition of new parameters for a plugin effect

  Hello

  That I was developing an effect, I built projects to test things out.  Now, however, I have added a new parameter to an effect, and when I open the projects that contain the same effect of the older generation, I get the following three error messages:

  1. after effects WARNING: conversion of command necessary indeed effect "Test Plugin".  Some effect options will be reset.  To avoid silently reset these same effect controsl on all subsequently loaded project, save the project and exit & re-run After Effects. (0: 25)

  2. after effects error: missing data in the file. (4: 33)

  3. after effects WARNING: your project file is apparently damaged (jumps to sections: 3). Please save under a different name.  (0: 26)

  Why this happens, and what I can do, if anything, to prevent this problem from happening.

  Thank you for your time and help!

  Arie-

  what you need to do is to make sure that the params of the older version are

  get the exact DISK_ID even in params_setup, as they did in the old

  Version.

  new params must get a new DISK_ID. Note that the DISK_ID order

  NOTHING to do with the order of param.

  If a parameter in the old version had DISK_ID = 3, and was the 3rd in the user interface, and

  in the new version, it is in the #5 index, it should still get DISK_ID 3.

  who said AE to associate a workflow of data backed up with some param. the

  Error You ' r get is when a recorded stream "slider" lands on a "checkbox.

  Param in the new version. (just an example, you get the picture)

• I can't power on a virtual machine (with linked disks) after the addition of new hosts of Lab Manager

  ENVIRONMENT

  -Lab Manager 3 using VC 3.5

  -Initially the 2 hosts in a cluster and managed by LM

  -Added new cluster with 2 new hosts in VC

  -Two bunches pointing to the same NFS storage

  PROBLEM

  -When you try to turn on a computer in new cluster, I get a "requested file" "not found" error

  RESULTS

  -This seems to happen only when creating a virtual machine that has virtual disks of parent; most of our VMS is linked clones

  -When you look at the log file, please see attachment, we found the following:

  It is the location of the new virtual machine in the new host:

  /vmfs/volumes/fabdf38d-beff047d/LMW2K3/2909/002909-T_XP_SP3_32b.VMDK

  When you look at the hard, it points to the parent disk, but it seems that it does not:

  /vmfs/volumes/6586c772-53eee1bb/LMW2K3/2904/002904-T_XP_SP3_32b.VMDK

  Please note th volumen IDS are different and can not get the disc parent of the new machine.

  SOLUTIONS?

  Thank you

  Jose

  You should immediately stop using the new hosts otherwise creating new virtual machines can spoil the vmdk channels. Try http://kb.vmware.com/kb/1005930.

• addChild is the addition of new child but get rid of the existing children (if it is the same object)

  I have a chart of the letters from A to Z.

  I add the child to the scene with a discreet button represents the letter of the alphabet.

  I can add different letters to step up to 4 letters (I have a condition 'if', limiting the number of children on the stage).  But if I try to add 4 of the SAME letter, added the first, the second is added and removed from the first, the third is added and removed from the second (and the first has already been removed) and so on.  So I can never have the same letters as if I want to spell out MMMM as the expression of a feeling.

  How can this be?  I think I used a similar method before in a previous prototype where new children were loading on the scene from an image file on the disk.  In this case, all the children are integrated MovieClips in the FLA file (the FLA is huge!... because I have about 10 types of lettering images for each letter of the alphabet).  And I'm calling those with class constructors and pushing Classes in an array and then call this table a for loop iterating from 0 to less than 27 with i being a uint.

  Any help is greatly appreciated.

  -markerline

  :

  initialize

  var wordDisplayA:Array = [];

  var btnA:Array = [btn_A, btn_B],

  for (var i: int = 0; i<>

  btnA [i] .addEventListener (MouseEvent.CLICK, letterDisplayF);

  }

  use wordDisplayA to remove objects in the scene and null them.

  can change but do not change significantly

  function letterDisplayF(e:MouseEvent):void {}

  var C: Class = Class (getDefinitionByName ("Alpha_01_" + e.currentTarget.name.split ("btn_") [1] .toUpp erCase()));

  var instance: MovieClip = new C();

  addChild (instance);

  wordDisplayA.push (instance);

  instance.x = instance. Width * wordDisplayA.Length;

  }

  Call when you want to remove the letters.

  function removeWordF (): void {}

  for (var i: int = wordDisplayA.length - 1; i > = 0; i--) {}

  removeChild (wordDisplayA [i]);

  }

  wordDisplayA.length = 0;

  }

• The addition of new widgets in the library of Muse

  Hello

  I would use multiple widgets of the Muse Gallery for my sites.

  http://Muse.Adobe.com/Widget-Manager

  I downloaded, but how to I incorporate into the site? I just want different photo and video galleries.

  I thought I should add new widgets in the library of Muse, but I don't know how to do this.

  How one does a Widget of Muse, which does not exist in the pre-filled library?

  Thank you

  Muse, you cannot add widgets personalized to the library at the moment. To use a widget, you have downloaded you must open the .muse, select the widget and copy/paste to your project. Then you can modify it according to your needs.

  Francesco

• Change of file system after the addition of new technologies using the scope of technology

  Hello
  
  I checked - in my project Jdeveloper in ADE. I guard, check-in, all of my new project files in ADE. Now, I've added two more/component technology (ADF Web Application Support Library, ADF business components) using my project (Project Properties-> scope of technology). What file I need to change/add in my project in ADE?
  
  Thank you
  Vishal

  I checked - in my project Jdeveloper in ADE. I guard, check-in, all of my new project files in ADE.

  The question would be true for any source control system.
  What to checkin/merger of views is jpr file in your project.
  All entries in your 'field of application of technology' are maintained...

  In JDeveloper, you can just right-click on the name of your project-> releases-> consignment/validation

  Published by: Jang Vijay Singh on October 29, 2009 14:47

• General approach to the addition of new attributes

  Hi all
  
  I'm after that insight that the approach that I plan to add new attributes to posted tables UI is healthy.
  
  
  
  Basically, I need to add attributes to the tables view reporting within projects. These attributes already exist on the tables of the ebs. The approach that I considered includes using JDeveloper to add a few columns to the extended view objects, make a BC4J substitution and then customize the UI to include the new column.
  
  
  
  I know that this approach should work for flex-fields. I was just wondering if this is the best way to make such an extension? Is this what I need to consider?
  
  
  
  Thank you
  
  Kris
  
  
  

  Kris,

  If the attributes are available in the t, then simply create columns in the table through customization and refer to the instance of the view and correctly display the attribute names.
  If the attributes are not available in the original Version, you may need to modify the query and substitute the original standard Version with a custom one. Then the same process of adding columns through customization and evoking the display attributes.

  Hope that helps.

  Concerning
  Sumit

• I tried to sync my ipod with my iTunes after the addition of new music, but when I tried it could not synchronize?

  the error is '1156' apparently 'others' files is full and not audio files that I check to see if they took up a lot of memory, but they don't I also dumped more music that I added but still didn't work I also checked the calendar, SMS, apps, and other programmers like that but nothing happened and the 'other' bar still takes most of the capacity on my iTunes when it does not still took half of what my audio did before I tried the sync. Does anyone have any suggestions.

  Hello

  I suggest you to refer to the articles and check if it helps.

  iTunes: synchronization of multimedia content for iPod and iOS devices

  http://support.Apple.com/kb/HT1351

  iTunes: iTunes Store advanced troubleshooting

  http://support.Apple.com/kb/TS3297

  If the problem persists, I suggest you to contact the Apple Support for assistance on this issue.

  Apple Support communities:

  https://discussions.Apple.com/community/iPhone/accessories?view=discussions

  I hope that helps!