disable the key of Windows 7

Similar Questions

• How to disable the touchpad in windows 8 - Pavilion g6

  How to disable the touchpad in windows 8 - Pavilion g6

  Welcome to the forum, Sally.

  There are several ways to do this - method you choose may depend on what you need to accomplish.

  Follow a few ideas.

  • A double tap farm in the upper left corner of the touch pad if it off for a single session.

  Enable / disable

  Control Panel > display icon > mouse > Settings of TouchPad > click on "enable TouchPad.

  They continue parameters to install and configure the TouchPad as you like it...

  ==========================================================================

  A method that works with the pilots 'old', it is a failure of session by session...

  Make sure this setting is ON / CHECKED:

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  () repeat) TouchPad settings (button) > click tapping >

  Click the shimmering blue wheel

  In "box to Disable TouchPad settings".

  CHECK "Double Tap to activate / disable the TouchPad.

  In the 'Action in the upper left'

  CHECK "Disable the TouchPad during a session.

  Close

  Ok

  
  NOTE that, if it is available on your version, you can select to "turn off the TouchPad" - that's fine, unless something goes wrong.  You could get stuck without your USB mouse AND no way to return to the setting to activate the touchpad.  I don't know if I would use this setting.

  ======================================================================================

  Next...
  Latest drivers (V16.x) have the ability to disable the TouchPad / click on the keypad with a setting on the main page 'Settings' when a USB mouse is used.  This is a very nice feature.

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  CHECK "disable the pointing device internal when the external USB pointing device is attached.

  If you want to be alerted and see a visual cue of disability >

  TICK "Animated icon in the taskbar" >

  and make sure you have your updated task bar notifications so you can see the view of the mouse.

  

  =====================================================

  I hope this helps!

• How to disable the MATLAB command window when the Matlab Script

  Hi, is it possible to disable the MATLAB command window popup when the Matlab script? Thank you.

  Isn't fear. As soon as you close the window is closed by the ActiveX Server and your script will stop running. You can, of course, reduce by using the operating system. Under Windows, you can use the Utilities of Windows API, as provided for in one of the threads of research responses.

• Please help - enter administrator password or power on password-system disable the key 76219396

  Please help - enter administrator password or power on password-system disable the key 76219396

  It is a presario cq61

  Hello

  Try to enter: 69171918

  Kind regards

  DP - K

• Windows 7 will not be updated after you disable the upgrade of Windows 10.

  Hello.

  We have a number of computers at work that all run windows 7 pro 64-bit. We cannot upgrade to Windows 10 because it is not compatible with our companies critical software.

  I disabled the update of windows 10 via;

  -Uninstall KB3035583

  -Installation of KB3065987

  -Start-up of "disable update" in group policy under admin template/windows components/upgrades

  He worked on all the computers except one. All other computers are updated to windows 7 with no request an upgrade to windows 10.

  Simply, a computer that will not update hangs on the screen of "check for updates". I ran the Microsoft fixit50123.msi to this topic.

  What other options can I try on this computer thugs?

  Hi Paul,.

  Thanks for posting your query in Microsoft Community.

  I understand that one of the computers will not update for Windows 10 and I appreciate the efforts made in the patches that you have already tried. Let me ask you;

  • This computer is connected to the domain?
  • What security software is installed on the computer?

  From now on, I would ask you to refer to the methods provided for in article below and check the status.

  You cannot install updates in Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2

  In addition, refer to the suggestions provided by Andre Da Costa in the thread below link and check the status.

  10 Windows Installer error "WindowsUpdate_C1900101-20017.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• XBR49X800D are there no option to disable the key tone?

  XBR49X800D are there no option to disable the key tone? It is very annoying navigating around and hear tones every time I hit the buttons.

  I have the XBR43X800D, but I think that the controls are the same. I turned off the annoying tone by changing its system to off. In the home menu, go to settings, sound then its system. This off my keytonw sound when navigating menus. I think that some applications may have their own sound tone so this may not work 100%.

• Power on password & system disable the key... need fix number of entry

  Presario C700 power on password, after three unsuccessful attempts get - system disable the key: 67653647. Please tell me how to get around and Turn off and if a BIOS upgrade will fix once I'm back at this PoS! Thank you very much!

  Hello

  Pleae try:

  78731289

  Kind regards.

• I have the key for Windows 7 Professional, I use this key to activate Windows 7 Home Basic Edition?

  Original title: Please help me

  I have the key for Windows 7 Professional, I use this key to activate Windows 7 Home Basic Edition?

  No, you will need to purchase a product key to activate Windows 7 Home Basic Edition.

• How to create a recovery image using the key of Windows 8?

  Confusion of title: original backup

  I bought Windows 8 online... downloaded and installed.

  When Windows Update 8.1 is available, the Microsoft support team made this update remotely... as I was part of the people having problems.

  I would like to make a recovery disk, but I thought the key for Windows 8 and Windows 8.1 will be different.

  Do I have to re - install Win8 and then perform the update 8.1 in case of failure of the system because of the issue?

  Can I make a picture of the current installation to reinstall?

  Hello Terry,

  Thanks for posting on the Microsoft Community.

  I understand that you have installed Windows 8 and then upgraded to level to Windows 8.1 through an update.

  Windows 8 key can be used for the 8.1 Windows as well.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  I hope this helps to solve the issue. If you still have the same problem, get back to us. We will be happy to help you.

• How to disable the pop-up window of assisted reading?

  How to disable the pop-up window of assisted reading?  It is so boring, and this terrible program aid is non-existent.  If I find a different program I won't use it.

  Not easy to use at all.

  Hello

  Please, try the following:

  Open Acrobat/Reader

  Go in Edition > Preferences

  Under categories, click Accessibility

  Other Accessibility Options pane

  Uncheck the option Enable assistive technology support

  Thank you

  Abhishek

• HP Probook 650 G1: How to disable the keys way to Probook 650 G1 running Windows 7, 64-bit

  I just bought a HP Probook G1, intel i7 650 - 4600 m, system BIOS 01.34-08/28/2015, keyboard review KBC 16.3 C version.

  ESC and F1 through F12 function keys seem to be in the Mode of action key (for example flight gives HP, F6 system information allows you to change the audio levels, etc.)- and I prefer to keep the standard functions of these keys (for shortcuts in Word and Excel, also for Express Scribe transcription software).

  I found Ctrl + Fn + the function key corresponding is workaround to achieve some (but not all) the standard functions - but which is cumbersome when used frequently. Workaround doesn't seem to work for the ESC key.

  I saw a few tips on how to disable the Mode keys on some laptops HP - eg
  http://support.HP.com/au-en/document/c02035108

  - and I have used this method on the previous laptop HP (e.g. Pavilion G6), but it does not work for this Probook. The configuration screen of the BIOS on my new machine does not seem to show the key Action Mode (or same System Configuration) as an option.

  I would be grateful for suggestions.

  Problem is now resolved, thanks to HP Technical Support phone line. Their tips were:

  * go to the BIOS Setup in the usual way (shut down, then power on, press ESC, choose F10 for Bios configuration)

  * Choose the Information System

  * arrow above to advance

  * Choose the Configuration of the device

  * Uncheck the Fn key switch

  * Save, etc.

  The corresponding option is more referred to Action Mode button for this model of HP laptop, at least not for the version of BIOS this Probook 650 G1 (worm 1.36, 25/04/2016).

• How to disable the shortcut of Windows 8 F1

  Whenever I click on F1 he opens Windows Help and Support. I read on the forums about how to to disable it but none for Windows 8. I need the F1 key for games.

  KleinC,

  If you press the ESC key when you turn on the computer, it should give you a start menu.

  Select Configuration of the BIOS (F10). This will take you to a configuration utility. Arrow during setup of the system.

  You should now have the option to disable the action keys.

  Here is a link that will show you how to disable the action keys.

  I would like to know how everything goes.

• Can I reuse the key of Windows 7 Professional?

  Hey,.

  Been using Windows 7 for a few months now and I must say, im absolutely love it.
  The other day, while visiting some dubious sites offering a video converter, I got a virus.
  Now, I tried AVG and an anti-spyware program, and both can detect the virus but not effectively deal with it.
  I find myself with a frustrating user experience which includes Windows crashes, a lot of notifications and general performance slowdown, on what is a fast laptop. I'm tired of trying to patch up things and think that the best method would be to format the HARD drive and reinstall Windows.
  Now, my question is, when I reinstall Windows, my product key will be reusable?
  I picked up my copy of Windows 7 on the offer of £30 student and am concerned about the use of the license.
  Like what I do, can I disable Windows somehow, then reinstall it just use the same key?
  Someone at - it advice on the system would work?
  Thank you.

  Hello

  Product key Windows 7 (license) is constant, it never expires. You can reuse the key as many times as you want, as long as the operating system is installed on a single computer at a time.

  The student version of Windows 7 is the retail version upgrade. You will need to perform the installation in the same way that you did when you originally installed it.

  The product key that you used to activate the first installation is maintained on Microsoft Activation servers. After the reinstallation, you may need to perform a manual activation, which means that you may need to use the phone option when you activate. Here are the instructions for a manual activation.

  1. from the desktop, press the button of the Windows Logo + R. This will bring up the run dialog box.

  2. in the Open: box, type slui 4 and press OK. This starts the manual activation wizard.

  3 select your country from the drop down and click Next.

  4. the wizard displays a toll-free telephone number. Leave the wizard open on the computer and call this phone number.

  You will receive a few saved options. Select the option to speak to a representative.

  The representative will manually activate this system for you.

  Let us know if you have any problems more

  Ronnie Vernon MVP

• disable the key of win 7

  is it possible to disable win 7 key?

  Well, you could uninstall the product key for the machine, but you would still have to reactivate it on the computer that you plan to install on.

  Click Start, type: CMD
  Right-click on CMD
  Click on run as administrator
  At the command prompt, type: slmgr.vbs - upk

  Press enter, this will uninstall the product key of the computer and to the evaluation mode, you are now free to use it on another computer. If you experience problems, try to activate by phone:

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  The mode currently of the installation process, you will need to be activated or it will go into reduced functional mode. You have the option to install another version or edition of Windows or get a product key for it. Alternatively, you can put the system as follows:

  To format drive:

  1. Insert the DVD of Windows 7
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on "repair your computer".
  6. Select the operating system you want to repair.

  7. click on the command line

  8. at the command prompt, type: FORMAT C: /.

  Press enter on your keyboard

  Type y for Yes

  Press enter

  Please wait while the drive is formatted.

  Type exit to close the command prompt, and then click farm to shut down the computer.

• How to disable the pop up "Windows Media Player cannot download the information on the media... "after the extraction of a CD without activation of network connectivity.

  When I copy a CD with Windows Media Player, I get the message pop up after the investigation period is over: "Windows Media Player cannot download the media for this CD information. The other titles, artist, and album will be identified as "Unknown" in your library. For best results, connect to the Internet or manually add media for CD information. »

  I know that the message appears when I turn on the setting to allow WMP to connect to the internet to get information about the media, but I don't want WMP does. What I want is a button I can push on the pop-up that says "don't show this message again" (similar to the warnings seen in internet explore). How can I disable this pop-up window without activating the internet connection option.

  In case you're wondering, the data from the internet are incompatible in the naming convention so when I rip an audio book, so I can listen to my mp3 player, I can't completely post-processing script because not all of the disks in a set have a coherent on the slopes or even name the disc etc. At least drives marked 'Unknown' is consistent and so easy to script for the reduction to a single MP3 file.

  Hello

  Do the following and see if they help.

  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  a. start Windows Media Player. Right click on the toolbar at the top, select 'Tools' and select 'Options '.

  b. Select the "Privacy" tab uncheck all options in the tab.

  c. Select the 'Network' tab uncheck all the options in this tab as well. Click on 'OK '.

  d. click "Start", select "Run" and then type "regedit" in the appropriate field. Press "Enter". Click on "File" and "export." Type a file name of registry backup that you can remember, which contains the current date. Navigate to the registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\PlayerUpgrade." Under 'Name', double-click "EnableAutoUpgrade." Under 'ValueData,' type 'no.' Go to "HKEY_LOCAL_MACHINE."

  e. click 'Edit', 'New' and 'key '. Type "WindowsMediaPlayer." Click on 'OK '. Select the new key, and then click on 'Edit', 'New' and 'DWORD value'. Type "DisableAutoUpdate" and press "enter." Select 'Edit' and then 'change '. Type '1' and click on 'OK '. Click on 'OK '. Click on "File" and "Exit" to close the registry editor.

  f. click "Start", "Control Panel" and "Security Center." Under ' Manage Security Settings for, "click on"Windows Firewall ". Click the 'Exceptions' scroll down until you see "Windows Media Player." Make sure that the box next to the entry is unchecked. Click on 'OK '.

  g. right click on the toolbar in Windows Media Player. Select 'File' and 'Work offline' to completely prevent Windows Media Player to access the Internet somehow. When you want to restore Internet access, right click on the toolbar, click on "File" and remove the check mark next to "Work offline."

  That should do it.