disable the plugins or the value 'never activate' on multiple clients

Similar Questions

• Display the values selected in a multiple selection prompt

  Is it possible to display all the values selected from a multiple selection prompt? One who is not in a mini report with a filter = promt tabular. I need in the narrative field.
  
  I don't have anythign to find at the moment which gives no other alternatives.

  Don't know why you need in the view of the narrative, but outside of what you mentioned (prompt = filter), there is no way to store multiple values in a variable to use in the same report selections. But you know that if you chose the way you mentioned, you could do this:

  (1) to your "mini-report" switch to the display of explanatory text.

  (2) since there is only a single column, type @1 in the narrative field.

  (3) consider the maximum number of values that a user would choose 10. Then in the 'lines to display' set 10.

  (4) in the line separator, put in a comma and press the SPACEBAR (this will add a space after the comma).

  (5) now drag this report to the dashboard and the button report properties, select 'View', then select your narrative point of view.

  HTH,

• NVIDIA Stereoscopic 3D Driver Service disabled makes Firefox slow start (even if related plugin is set to never activate)

  The problem I encounter is that I disabled the 'NVIDIA Stereoscopic 3D Driver Service"my msconfig configuration. After a reboot when I started Firefox there is a huge delay (2-3 seconds) showed a white screen (which indicates a wait for a timeout).

  Now, before pointing at NVIDIA (which I also finger pointing here), I want to clarify, Yes, there's a plugin installed in Firefox (NVIDIA 3D VISION), but it has been set (disabled - never activate). So I wonder why would a disabled plugin that is configured to start never attempt to communicate and causing a such time-out at the start, it makes little sense to me.

  Hi TaohRihze, I don't know, but this also occurs when you have disabled hardware acceleration? And who is an extension required for your graphics card?

  Instructions below:
  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options (Preferences on Mac or Linux) as follows:
     • In Firefox 29,0 and above, click on the menu button

       

       then select Options Preferences on Mac or Linux, or Windows.

     • In 28.0 Firefox and earlier versions, click on the Firefox orange upper-left button, then select the 'Options' button or, if there is no button up Firefox, go to tools > Options.
  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• disable the click to activate functionality?

  Win7, Firefox 30. I followed the instructions to disable the * click here to activate * feature and appears as * wrong * about: config... but it is still asking me to click to activate. What Miss me?

  You can set the default behavior for each plugin on Firefox/tools > Modules > Plugins page.

  • https://support.Mozilla.org/KB/why-do-i-have-click-Activate-plugins
  • http://KB.mozillazine.org/Issues_related_to_plugins#Click_to_Play

• have the value never sleep, but closes after 20 minutes of display

  in the control panel I have put the sleep and display the option never, but show closes after 20 minutes

  Hello

  • Have you checked your screensaver if you listen to?
  • You see a message on the screen?
  • How to get back on the desktop when the display is gone?
  I suggest you to turn off the screen saver and check if it works.
  Here is the link:
  Enable or disable the screen saver
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-your-screen-saver-on-or-off
  

• Disable the synchronization of time on VMLab CLient

  Hello

  I want to disable the synchronization of a client on VMLab DST. I tried the following:

  (1) stop the time Service Windows

  (2) to cancel the time Service Windows

  (3) disabled the option of time synchronization of all customers running VMTools?

  (4) clicked on the properties of the client in the workspace and the box "time synchronization user" disabled and unchecked.

  But even when I restart the machine, it automatically synchronizes the windows clock (even if no Service time Windows is running)? I know on a VM Workstation, I can edit the .vmx file and set time.sync = 'FALSE' option (which disables the synchronization of time of the VMWare service). Is there something similar for the client to a VMLab.

  Thank you

  Mateen

  Text of the KB article.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1189

  Solution

  The

  time synchronization checkbox controls only if the time is

  periodically resynchronized when the virtual machine is running. Even

  If this box is not checked, a default VMware Tools synchronize the

  time to the virtual machine after a few specific events that are likely to

  Let the incorrect time.

  If you want to completely disable the time synchronization in the comments, open the configuration of the virtual machine (.vmx) file in a text editor and set the following options to zero, as shown below.

  tools.syncTime = '0 '.

  Time.Synchronize.continue = '0 '.

  Time.Synchronize.Restore = '0 '.

  Time.Synchronize.Resume.Disk = '0 '.

  Time.Synchronize.Shrink = '0 '.

  Time.Synchronize.Tools.Startup = '0 '.

• How can I get the value of list of multiple selection in javascript?

  Hello
  
  If I want to show the list of colon delimited in an alert box JS what I'd do?
  or if not, how do you show it?
  
  There are several SelectedIndexes?
  
  Type = select-multiple
  
  Bill

  Bill,

  Watch more closely the example I've provided earlierly:

  http://Apex.Oracle.com/pls/OTN/f?p=31517:166

  I use this code:

  for (i = 0; i < $x (pShuttle2) .length; i ++)
  {
  If (p_array == ")
  {
  p_array is $x (pShuttle2).value;.
  }
  on the other
  {
  p_array = p_array + ":" + $x (pShuttle2) [i] .value;
  }
  }

  Get.Add ('SHUTTLE_ITEM_VALUE', p_array);

  to concatenate the values in the table in a colon delimited string by some. It is later used to define the session state of the element of the shuttle to this value.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• How to disable the stop scroll activate lock funct-definitely?

  It must be one of the most stupid buttons on modern keyboards.  If its in the wrong setting, it can REALLY spoil you. How do I eliminate this?  And, since the answer probably involves the registry, maybe someone bright here can shed some light on the way that the control key lock funct-too?  The two are never used by 99.99% of users of the computer once put in their best positions.  I think we all want F-lock on and turned off.  Once settled they must be locked so they can never be activated by accident.

  Hello

  You will need to check in the basic input/output system (BIOS) on the computer to find an option to turn off these keys.

  You need to contact the computer manufacturer for help with the basic input/output system (BIOS) on the computer

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• disable the value change listener until the previous process is complete

  I use Jdeveloper 12.1.2

  I have a text field that has a value change listener. The listener calls a function that manages a number of process and queries. The function then clears the text entry field and focus the cursor in the text entry field.

  My problem is that the user will enter the text back to back quickly it causes all locked up. Is anyway to prevent the user to enter additional text before the end of the listener.

  I tried the following, but he has not always prevented the user. At the beginning of the listener:

  FacesContext facesContext = FacesContext.getCurrentInstance ();

  UIViewRoot root = facesContext.getViewRoot ();

  InputText RichInputText = (RichInputText) root.findComponent ("it4");

  inputText.setDisabled (true);

  AdfFacesContext.getCurrentInstance () .addPartialTarget (inputText);

  then at the end of the listener, I re activated the field.

  inputText.setDisabled (false);

  AdfFacesContext.getCurrentInstance () .addPartialTarget (inputText);

  Maybe this can help: http://www.jobinesh.com/2010/10/preventing-user-input-on-fusion-web.html

  Dario

• How can I disable the page Never Ending?

  He jumps around and I scroll down to get to the point where I was at.

  guigs2 said

  In the settings of Firefox look under "General".

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select General.

• Boxes/buttons pause "Include in Quiz" (disable) the value-click drag the navigation buttons (8 Captivate)

  I've got some scenarios with options of branches. They were not originally intended to be a quiz so I built each by a simple click boxes (which was easier - I hate fighting with slides of questionnaire). But now the SME wants to follow learners options to choose, so I tried to fix to be included in the questionnaire and named the Interaction ID like something recognizable when you view the data of cmi.interactions SCORM.

  Actually, it seems to work EXCEPT it kills my ' back' button (a custom button with a simple jump to prev slide), which is bad. Any ideas? I'm ready to rebuild with the help of a questionnaire slide but I'm not happy about it. There are other situations where I wanted to have a clickable random on a non-quiz slide included in the questionnaire, but I have found this same behavior and just worked around him then. I want to win this time. Thank you.

  Check your quiz settings. You back off in the quiz?

• Toggle button depends on the value of the selected row

  Hello.
  
  My problem is:
  
  I have a Table "singleSelect" and a button Delete.
  
  I´d want to toggle the button depends on the value of the selected row.
  
  I mean:
  
  C1: DepartmentId
  C2: Yes/No
  
  For each line: If c2 = "" then disable the rest button activates the button.
  
  I hope you can help me.
  
  I'm from Venezuela my English is not very good. :)

  Disabled = "#{row." C2 eq 'No'} '.

• Change the value of bean choice message empty

  Hi all

  I hope all are doing well...

  I iProc page: on this bean of choice page here a message and this bean of choice of message with 3 values: Yes, no and do not know

  Now my requirement is: I want to just replace the text of do not know white, i.e. "" (to note) that means that bydeafult this message see the choice bean empty value... If this is not possible, then we can show any other text instead of do not know. other features should be the same...

  I want to do with the extension of the CO... So I would write code for it in Graf one spout. I already extend this CO to another question...

  Thanks all.plz suggest a solution...

  Hello

  Check the messageChoice LOV VO is based on any Look up. If the values of the messageChoice VO is based on quick glance upward means follow these steps:

  Run the following query and get the id of the application:

  Select application_id from fnd_lookup_types WHERE lookup_type = 'LOOKUP_NAME. '

  And then run the following code passing the id of the application:

  SELECT (SELECT application_short_name
  FA fnd_application
  WHERE fa.application_id = frt.application_id
  and frt.application_id = 20386) asks,
  FRT.responsibility_id, frt.responsibility_name
  OF apps.fnd_responsibility_tl frt.

  Then check what responsibility he is attached, then go to this responsibility--> research

  Otherwise move the developer of the Application--> research

  Ask your search with the name, then check the code and feel that look upwards.

  If you can change, modify the value do not know else disable the value ignores by unchecking the checkbox.

  Add a value more that even looking for him.

  Thank you and best regards,

  Myvizhi

• Disable the column in a table.

  Hello
  
  How can I disable column in a table.
  in collaboration with 4.1 and I Assistant founded in table form.
  
  If I entered the value in a column second column must disable and vice versa?
  
  
  
  How can I do this?
  
  
  
  Thanks and greetings
  CORINE

  CORINE wrote:
  Hello
  Could you help me to write the code. My column in a table are 13,14,15,16

  If I type in field 13 then 14 and 16th column should turn off and
  If I go should disable the value in field 14 and 13 and 15 column.

  How can I do this?

  Thank you & best regards
  CORINE

  I have not tested this code; but the following may be your approach:
  In the field 'Attributes of the element' of column 13, you can call a javascript function:

  onblur = "javascript:updateCols(this);"
  

  In your browser, right click on each of your columns (one at a time) and select "inspect element" to check the attributes of the HTML element. Assuming that column in the form of your table 13 is rendered in the HTML like f13, 14th column as f14, 15 columns as f15 and 16th as f16, write this JS function in the HTML page header:

  The JS function above is triggered when the user moves out of column 13. The function then checks the length of the value entered by the user in column 13. If the length is greater than 0, it disables the columns 14th and 15th. Otherwise, it allows them.

  The code above is for your first scenario:

  If I get home should disable the value in the field column 13 then 14 and 16

  You can do the same for the other scenario.

  Hope this is clear. Or otherwise, give me access to your workspace and I try the here above.

• How to disable the image previews

  In the windows client there is an option to disable the image previews with

  Tools-> Options-> settings IM-> Show advanced options. Uncheck the option: "show images in conversations".

  In the client Mac there isn't this option. How to disable the image previews in a Mac client?

  OK, found the solution in another thread here: http://community.skype.com/t5/Mac/YouTube-thumbnails-amp-link-previews-Why-don ' t-I-see-them/m-p/39692...

  Menu bar-> display-> display Images-> uncheck