Disabling TouchPad G570 problem

Similar Questions

• Portege R830 - cannot disable touchpad

  Hello, strange question. But can not turn off the touchpad on a Portégé R830 (Windows 7 32 bit). I've seen this problem on two of the machines I have. This has never been a problem for the models Tecra I got, M5, M9, M10, M11, etc. R840.

  I have the latest driver installed Alps, from Toshiba.co.uk. I tried the button on the touchpad, it does not work. The device of the Alps can be disabled in the Device Manager. I tried the Toucpad of the State system, Advanced tab, toolbar properties Advanced settings. It doesn't have a single parameter «Disable touchpad» There is no option to disable the touchpad when you use a USB mouse - however, this does not work.

  Can anyone help with this? The only other option I can think of is the BIOS, but it would be inappropriate to my users, who may want to turn it back on it at a certain point during execution of Windows.

  Hi liamw,

  You can disable the touchpad if you press the FN + F9 key combination. The touchpad will be disabled until you press this combination of keys again, but a mouse external isn t touched. That means you can still use a same USB touchpad mouse is disabled with FN + F9 key combination.

  Check this box!

• HP envy 15 t-q400: permanently disable touchpad

  Hi everyone, does anyone know how to permanently disable a synaptics touchpad? I went to the touchpad settings and clicked on disable touchpad so that disable touchpad when a usb mouse is connected. My problem is that when I reboot, the pad touchpad is enabled again and I have to repeat the steps above. Is it possible to disable permanently? Maybe something in the bios? I also uninstalled the synaptics driver, but my touchpad still works.

  Hello

  Try the following.

  First of all, if she has not already reinstalled, install the driver Synaptics, and then restart the laptop.

  When Windows has reloaded, hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Open the control panel of Synaptics and set options to 'disable the touchpad' and 'disable the touchpad when a usb mouse is connected', and then apply the change.

  Check if the settings is now kept after a reboot.

  Kind regards

  DP - K

• IdeaPad Y410 Disable Touchpad

  On my new Lenovo IdeaPad Y410, the touchpad, while nice, is big enough, and when I type, the edge of my Palm frequently bumps it slightly, with like a click and shake completely as I type. There is the button disable touchpad with Fn + F6, but apparently not actually disable the touchpad, even if the led lights on the front. Any fix for that?

  Problem solved--apparently on the new computer, I had, the pilots had not been updated. Win8 gestures properly, as well as neutralizing him.

• Disable touchpad HP Envy 17

  I have exactly the same problem you have posted... Do you have a solution?  There is no 'mouse' or "Point Touch Control Pad" with a disable to kill the touchpad.  I am thinking to resort to disassemble the laptop and unplug the cable that plugs into the touchpad itself.  I also deleted the synaptic touch pad (Windows 7) device driver and did not help.

  I'm pretty sure that remove the cable from the touch pad will fix the problem, but it is a fairly long process... 20 with respect to and then if I still wanted to sell the laptop, I would probably have to plug the cable back in again for someone else.

  Please help, Dave

  I've done what I suggested above to remove the flat cable for the touchpad disable touchpad and it worked very well.   I removed the two ends and folded cable where HP had folded it and scotch taped it to the system board next to the connector where it plugs IO on the system board so that someone will be able to put it back in if I never sold it.  On the plug, it has a little fitting valve rubber to flip upward to allow you to remove the cable at both ends.  I don't have any errors saying that it was not connected.  After the cable has been removed it simply does not work which is exactly what I wanted.    Problem solved.

  Dave

• ATTN: Zaq attack disable touchpad when mouse is used. HP Netbook Mini 110-3530NR, Windows 7

  How to automatically disable touchpad when the mouse is used

  Say hello to new coppens1.

  I'm glad to hear that you were able to find a solution to this problem!  Also, thank you very much for the update.  I will make sure you and remember for future use.

  Have an amazing week!

• Cannot disable Touchpad on Windows 7.

  I am running Windows 7 and I want to disable the touchpad. When I try to disable it in Device Manager, the option 'Disable' is not clickable. When I try 'Delete' option, it says I have to restart my computer to apply the changes, but after that I restarted my computer, the Touchpad is still active.

  Thank you.

  Hello

  I got an even hard to disable touchpad, and I had the problem in this way. If possible, connect an external mouse into a USB port, then open the Touchpad control properties tab and look for a framework written something like this: disable the Touchpad when an external mouse is detected.

  Go back to Device Manager, and then try to disable the Touchpad. As an external mouse is already connected so I have a registered pointing device, Windows would let me disable the Touchpad without reinstalling on the next reboot.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Cannot disable touchpad on the Qosmio series F

  I reinstalled windows from backup DVD. Now, I can't disable touchpad after the plug in USB mouse. What should I do?

  All you need to do is use the FN + F9 key combination and choose the DISABLED option. You can also check the properties of the mouse. There must be the same option too.

• WANT x 360 laptop: how to disable TouchPad on ENVY x 360 laptop?

  1. I have no key.

  2. I have attached a mouse but the TouchPad is always enabled.

  3. I have 2 options, but all of them are frozen:

  Control Panel\Hardware and Sound\Tapping\TouchPad Settings\Double to disable Zone press to activate or disable the TouchPad

  Control Panel\Hardware and Sound\Tapping\Top Action\Switch wide TouchPad left

  So, what can I do to disable the TouchPad on ENVY x 360 laptop?

  Solved.

  Solution:

  Start /.

  Research /.

  Personalize your computer.

  Change mouse pointers.

  HP control area settings.

  Disable HP control of area

  Source:

  http://h30434.www3.HP.com/T5/TouchSmart-PC/how-to-disable-touchpad-on-HP-envy-TouchSmart-M7-notebook-PC/TD-p/3180731

• Cannot disable touchpad on laptop. does not display the properties of inmouse

  cannot disable touchpad

  Hi hillarybell,

  ·         What I have

  s of the brand and model of the laptop?

  ·         Did you do changes on the computer before the show?

  ·         What happens when you try to disable the touchpad?

  Most laptops have a function key (FN) which can be used in combination with other keys for example FN + F2 or FN + F7 to disable or enable the touchpad.

  You can also disable the touchpad in Device Manager. Follow these steps:

  (a) click Start, run type devmgmt.msc and press enter.

  (b) in Device Manager, expand mice and other pointing devices and locate the touchpad.

  option c) right click on the touchpad and click disable . Click OK.

  You can also consult the manual of the laptop for more information and help.

• Re: Disabling Touchpad problem

  Hello

  I can't disable the touchpad as the fn + f9 combination does not work.
  The GET of touchpad in the way during typing, I would really appreciate help :)
  I use windows xp instead of the pre-installed vista btw.

  Satellite L40 12 x belongs to the PSL40E series.
  Currently, it seems that Toshiba drivers are only available for model number PSL48, PSL49, PSL4C and PSL4B

• Cannot disable Touchpad on the Satellite A200-13O

  Hello, have a Satellite A200-13O, I got a USB mouse, and when it is connected I need it TouchPad.
  So I try to disable it by FN + F9, but it does not work.

  Any idea? I really need to solve this problem.

  Thank you very much for your help.
  Aviad.

  Hello

  Is your laptop preinstalled with recovery image Toshiba or you have installed your own operating system?

• Portege Z30 / driver Audio Replicator + Touchpad scroll problems

  Hello.

  I bought a Z30 and I'm pretty happy with it that I worked for years with the Thinkpads (+ Dock)
  but there are a few light (more or less can be addresses as a driver) questions that I discovered.

  Notice: I use Win7 64.

  (1) with the Replicator Docking Station, I'm not able to remove the USB Audio device is currently running.
  As you play a video or music. -J' looked for a newer driver (from C-MEDIA) as the standard Microsoft Driver may not be the best choice but I have found NO Win7 drivers for this device. The pilots of C-MEDIA only I found is Win8.

  (2) ALPS Touchpad (pilot)... EH... the material error only on this model really seems to be the touchpad. It is quite difficult to click on buttons AccuPoint (those under the keyboard) and drivers of touchpard are not flexible somehow. Gestures are not actually enforced as it should... seems to be as ALPS had to work on without a lot of time. Synaptics would have been a much better choice.
  The driver cannot be adjusted to speed with scroll gestures and by default is AVERAGE... really ridiculous WAY to fast. In short, it is unusable for regular use. That the effects of tape, the gesture with two fingers and also the gesture of circle. He is desperately missing from a slider to change speeds. Or at least some indication of registry settings.

  Also please advice DAPS to add finger 2 tap as a regular feature in the driver. It can be used without any problem after minor registry change and it works without any problem.

  (3) in the manual NFC is listed, but I have not found ANY Z30 Z40 (Tecra) model has / contain probably the NFC module. -I've seen in some photos the flexband connector (must be for NFC) above the battery is actually present. -There will be a few spare parts (Please give me the ID number /) in the future?

  (4) smart card reader driver problem: I'm using the latest drivers and after some time and sleep (with Intel Rapid Start) the player first must be deactivated and reactivated to rework. certutil.exe - scinfo unresponsive until I have disable and re-enable the device.

  (5) I am absent in BIOS/UEFI to exclude startup devices. -This is normally a must have feature.

  I think that the user manual contain parts which refers to different models of Toshiba as Portege Z30-A/Z30t-A / Satellite Z30-A/Z30t-A

  Some models are equipped with an NFC function, but can not say with certainty what models support this feature exactly.
  It turns out that in many cases the m2 additional connector be responsible for these additional modules.

  Regarding the mode of UEFI: check if the BIOS update would add it. Some portable computers taken over this function after that the BIOS updated.

• How can I permanently disable TOUCHPAD on laptop? Windows7 64 bit.

  How to disable the touchpad on laptop permanently?

  I KNOW how to disable but whenever I restart computer - it

  It's on once AGAIN...

  HP pavilion dv7 6c27cl.

  Win 7 64 bit.

  I can't believe I have to download some software or readers to solve this problem.

  very frustrating.

  Thanks for any help!

  Kim

  Hi Kim,

  See the details in this regard the subtopic 'Disable the ClckPad' on the document link below for.

  Configure the ClickPad.

  Kind regards

  DP - K

• How to disable touchpad on satellite series?

  I need to disable the touchpad on my new Equium - cos it's driving me crazy when I use a mouse.
  The flashcards have disabled so I can't access the Fn/F9 road. I tried to run the Flashcards utility but it hangs when I click on apply.
  Is there another way to disable the touchpad?
  If this is not the case-how come back the flashcards?
  Help, please.

  Hello

  simply remove the flashcard software, and reinstall it. Whereas the problem?
  And to disable the internal mouse, just go to Device Manager and disable it, it's the easiest way...

  Any other questions?
  Welcome them