Disappear from files on the remote server (was: local files and remote server)

Similar Questions

• Get Photos 'from files and folders"does not work beyond the letter 'G '.

  I have PSE - 7 is installed in Windows 7 64 bit. The program seems to work fine except for this:

  I have a very important folder; (141 GB, 2 500 files, 207 000 files) The command 'Get Photos from files and folders' stops working in the middle of the letter 'G'...!

  I have the same folder in a machine running Win XP, and both PSE 5 and 7 PES do not exhibit this behavior. Can I import from any letter of the alphabet...! (LOL)

  The catalog associated with this installation file has been optimized and recovered.

  This folder is located on the "G: /" drive (volume).

  HARD drive "G /: ' has been fully formatted (not a quick format).

  The only exception may be the way things should have been done, is that the catalogue was opened under the drive letter and the serial number of the drive.

  Using the drive letter, this catalog open immediately. Any ideas...?

  I learned that from the PSE 6, PSE uses the serial number of the HARD disk and not the letter of the reader to access the content. However, a catalog will still open and register correctly, using only the letter of the drive from it's previous machine. (Note that this is the same behavior as earlier versions of PSE, such as PSE-5, which depended only on the drive letter).

  --> When we say that the ESP is not dependent on the drive letter to access its content, it doesn't mean that the PSE will display the serial number of the HARD disk in the application. In this case, you have changed the drive letter from E to F, PSE media will not suffer.

  I'm usually import a whole folder. Until the letter 'G', PSE - 7 works as expected. The photos appear in the organizer and are accessible in all directions. After the letter 'G', it is impossible to select any folder inside the dialog box «Get the folders of files and folders» When the element is highlighted, the letters blink and change for other mailings, then selection resets nothing selected. After 'G', I have to use the, command "Get pictures by the research. This works as expected. Once the pictures are inside the Organizer, everything is as it should be.

  --> This is a known issue. Simply select "All Files" in the "File Type" drop-down list present in the import dialog box. After that, it will work very well.

  Just to sum up PSE6 or PSE7 are not supported under Win7 so you could face some issues.

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• Add my button to view ons had disappeared from my navigation bar. It was the CAP as a piece of the puzzle. How can I get it back?

  I am running Firefox 20.0.1 with Windows 7 on my laptop. Room button shaped puzzle that displays my Add ons has disappeared from my navigation bar. How can I get it back? I tried to go through the button "Customize" from the toolbar on the menu drop down, but the icon is not there. In addition, some other add ons that I downloaded appear anywhere, even on my toolbar add-on.

  You can also right click on the navigation toolbar and click 'Add on bar' in the context menu.

• Media card reader disappears from leading to the card not being recognized under computer

  Original title: two years with media player card hardware/software problem?

  When I insert my card player media the G, H, I and J readers disappear which leads to the card is not recognized. If I completely shut down my computer, they come back and the card will read for this session. This does not happen if I do a simple reboot. My computer is not quite two years old and it lasts since almost the beginning. Dell has replaced once the card reader and cable three times and the motherboard. The last technician who came to me thinking that it might be a software Bus USB error. All drivers have been updated. I am at my wits end, because the problem does not happen whenever I inserted the card, but now, it happens more frequently. This problem seems to occur with the map of media player. And Yes, it happens with all Media Player cards. I mainly use this computer to upload photos. I was told NOT to back up my computer because, if it was a software problem I just would be to reinstall the problem once I did a restore. Is there someone out there who can help?

  Hi Chris,

  I was finally brave enough to install the updates of the firmware. I went from the 7.8 version version 7.12, but no luck. Initially, it worked, but once my computer came into fashion 'sleep', and I returned to use again, it didn't work. This has been a problem for almost all the time that I owned the computer. Very very frustrating!

  Any other suggestions, anyone?

  Thank you

  Sherri

• Restore the backup from primary to the DR Server online

  Hello

  I'm on Oracle 10.2 and restore an online backup of the main server on server of DR. Online backup has been taken: 30.11.2015 21:00 and ends at 01.12.2015 01:23:16.

  The first redo log when the backup began 60588 and the last roll forward log is 60596 when the backup is complete according to the backup log.

  However, it is beyond ask 60596 when you are recovering:

  SQL > restore database to sleep by using backup controlfile until cancel;

  ORA-00279: change 952123702 generated at 01/12/2015 04:50:25 needed for thread

  1

  ORA-00289: suggestion: L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60598_0681431456.001

  ORA-00280: change 952123702 thread 1 is in sequence #60598

  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}

  ORA-00279: change 952134239 generated at 01/12/2015 05:50:32 needed for thread

  1

  ORA-00289: suggestion: L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60599_0681431456.001

  ORA-00280: change 952134239 thread 1 is in sequence #60599

  ORA-00278: save the file 'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60598_0681431456.001' not

  longer needed for recovery

  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}

  ORA-00279: change 952145796 generated at 01/12/2015 06:51:06 needed for thread

  1

  ORA-00289: suggestion: L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60600_0681431456.001

  ORA-00280: change 952145796 thread 1 is in sequence #60600

  ORA-00278: save the file 'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60599_0681431456.001' not

  longer needed for recovery

  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}

  ORA-00279: change 952155617 generated at 01/12/2015 07:51:51 needed for thread

  1

  ORA-00289: suggestion: L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60601_0681431456.001

  ORA-00280: change 952155617 thread 1 is in sequence #60601

  ORA-00278: save the file 'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60600_0681431456.001' not

  longer needed for recovery

  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}

  ORA-00308: cannot open archived log

  'L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60601_0681431456.001 '.

  ORA-27041: could not open the file

  04002 - OSD: could not open the file

  S/O-error: (OS 2) the system cannot find the file specified.

  ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error

  ORA-01152: 1 no file has been restored from a sufficiently old backup

  ORA-01110: data file 1: ' Z:\ORACLE\A30\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'

  SQL > ALTER DATABASE ENABLE PENDING DATA base;

  ALTER DATABASE ACTIVATE STANDBY DATABASE

  *

  ERROR on line 1:

  ORA-01152: 1 no file has been restored from a sufficiently old backup

  ORA-01110: data file 1: ' Z:\ORACLE\A30\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'

  I noticed after I applied 60598, he said:

  
  

  ORA-00278: log "L:\ORACLE\A30\ORAARCH\A30ARCH\ARC60598_0681431456.001" file is no longer needed for recovery

  
  

  This means 60598 is really not necessary for recovery?
  

  No idea why she asked newspaper after 60596?

  How can I check which is the last log to roll forward to complete recovery?

  V$ RECOVERY_LOG shows nothing.

  Thank you.

  Hello

  If you try to enable the database, please make sure the SNA aligns with... In your case, controlfile raised YVERT YVERT/bass.

  If you try to re-create the controlfile.

  After you re-create the controlfile, you can run a fake recovery and open in resetlogs.

  After you re-create the controlfile

  SQL > restore database using backup controlfile until cancel;

  SQL > alter database open resetlogs;

  Thank you

• Migrating from Test to the new server - OBIEE

  Hello
  
  
  I was "assessment" OBIEE perfect on a test server small for awhile where I did considerable work on the two reports of the writing. development of dashboards, user security configuration and architecture of data needed in the physical layers / business model and presentations in administration of BI.
  
  My question is, what is the best way to transfer the solution in its current form to another server, without having to make extensive rework?
  
  
  
  Thanks for any advice,
  
  
  Robert.

  Lowest level: copy of the catalogue of the RPD and web on the other server, set the NQSConfig.ini and instanceconfig.xml and off you go.

  That's assuming you don't have change web messages, add custom images or files, change the styles or skins, you're still pointing to the same data sources etc. etc.

  You should take a look at one of the brands of earlier descriptions: http://www.rittmanmead.com/2008/04/28/migration-obiee-projects-between-dev-and-prod-environments/

  See you soon,.
  C.

• my family disappeared from firefox. The history a bookmaks disappeared. Icon is now blue.

  I started my computer and noticed that my Firefox icon was blue. All this has disappeared. I had no home no not favourites history and the impression the site is huge. That's happened.

  Aurora became the developer edition of Firefox with the update 12 Nov. 35.0a2 is now double duty.
  https://www.Mozilla.org/en-us/Firefox/developer/

  Open tools > Options-> general and turn the first preference - allow Firefox Developer Edition and Firefox to run at the same time - to return to your previous Aurora profile. He will tell you to restart Firefox.

• I got a phone call from a guy who said he was with Microsoft and that someone had linked in my computer. Is it a scam?

  I got a phone call from one of the related foreign accent that he was with Microsoft Security and that my computer has been used or something to that effect.

  I could hardly understand him.  Is this another scam floating around?   What should I do to report this?

  Thank you

  Short answer: Yes. It is a scam. Not much interest to report, as MS are well aware of this problem, but there is little they can do about it since then (I guess) most of the calls are created outside the United States

• Converter Standalone 4.3.0 question - Get "the specified parameter was not correct" and no source listed volumes

  Sorry - hopefully an admin can move this to the correct forum. I could find no community forum labeled converter so no idea where to post this message.

  My first time trying to use the converter. Use the latest version of the Converter 4.3.0 to try a P2V by using the source computer. This is a laptop Dell D820 running Windows 7 Ultimate x 64 business. I chose the source machine and all the default settings. Destination product is VMware Workstation 7.x and target files are either local or to a port USB drive (tried both). In the last step, I get a yellow bar with the error "the specified parameter was not correct" "but the following quotes are empty and presume it suppose to say the name of the setting.» The only thing I see that is suspect is that if I click on change in section 'Data copy', the list of volumes and empty and assume that shouldn't be. The sample video to get advice on the use of converter on VMware support sites show a volume listed here. I tried the same approach on a completely different system under Vista SP2 and still no volumes appear so maybe it normal?

  No idea what I am doing wrong? I did export logs and watch and it appears no volume information has been captured (a lot of & lt; destroyed & gt ;) but even once, just guessing.) Any advice would be appreciated greadly.

  Thank you

  Don

  I had the same problem on a Win7 x 64 machine... There was no listed disk to convert.

  I managed to solve the problem by running the converter as an administrator. Right-click on the Desktop Converter icon and select run as administrator.

  The disks appears and you can select which can be the converter.

• Is there a way I can change text entry in Apple TV like it's pathetic. The former arrangement was much better and we now have to scroll back to the text input as identification of email in every app feels like the stone age technology.

  Input test Apple tv interface is so pathetic and primitive and feels like the stone age. Its the most boring I've had in any interface computer or "smart." Is there a way to enter (say spell out) e-mail ID that cannot be recognized by voice, and that voice recognition is better compared to google.

  Use the remote app. Or wait for the future update which allows for voice text input, Bluetooth, keyboards etc.  You can always send feedback to Apple http://www.apple.com/feedback/

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• The path 'Administrator@VSPHERE.LOCAL.log' and 'noUser.log' in VCENTER 6.0

  Hi all

  I have deployed the plugin in vcenter 6.0 and it is deployed successfully.

  I found the diary of the Virgin in C:\ProgramData\VMware\vCenterServer\logs\vsphere-client\logs.

  But I could not find "[email protected]" and "noUser.log" where my plugin will record all the problems.

  Kindly help me.

  As far as I KNOW vsphere_client_virgo.log contains everything.  Check out server/configuration/serviceability.xml where you can reactivate user logs.

• Files disappeared from LR (deleted?), but has pictures of LR and hard drive. How can I get the folder HD back structure in LR?

  I can be the first person to have ever done that. I don't know what I've done yet. I have spend hours to organize my folders. I had imported them all in the horrible mess that they were (many duplicates, etc.). After obtaining their almost perfect I went to delete what I thought, it was a trash folder. I think I must have accidentally deleted my pictures folder (where they were all stored). Strange is that the catalog has all the 10,000 photos, but I have no file. Not a single one. Not even the HD Mac one. All changes have been made in LR, I know better than to go messing around with something outside of Lightroom. All changes I made to the files are on the hard drive right now. I just need to find a way to find the LR folder structure. However, it won't let me import anything. When I try to add a folder nothing is re-elected under the menu folders. I don't know what to do. Help! I've been throwing these to print photos for a Christmas gift.

  Given that I'm not a MAC person, as far as I know is that this file preference is located in a hidden directory and so you must follow the instructions in the link.

  The user library file is hidden by default on Mac OS X 10.7 and later versions. For temporary access to the file library user, press Option and select go > library in the Finder.

  If you don't want to delete the preferences file, you can rename it instead, and Lightroom will create a new file, preferably when you launch Lightroom.

• Why my disappear from Windows Explorer (the taskbar icon)?

  Eve since I got my computer Windows 7, the lower left of the taskbar was (from left to right):

  (a) Start button

  (b) Internet Explorer icon

  (c) a folder icon that would launch the Windows Explorer (for me to see my hard drives, flash memory sticks, etc. and all of their contents)

  Recently I did something - although I can't remember what - who has done away with (c) [(a) and (b) remain].

  What can I do to recover (c)?

  Yes, I went through several cycles of power-down/power-up and run antivirus s/w.

  Start | All programs | Accessories. Right click on Windows Explorer and Pin to the taskbar.