Disappearance of webcam hp

Similar Questions

• Disappearance of webcam

  I recently updated my HP dv6 1030us from Vista to 7 and the built-in webcam no longer works. It's like all the drivers and software have been removed during the update of windows. I need to know if there is anything I can download to fix this problem or if it's just that the webcam on this unit is not compatible with Windows 7.

  Have you installed the drivers of webcam for Windows 7 from HP site?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3860542#N1369

• Satellite P205-s6307: webcam Panel disappeared

  Hello

  I recently bought a laptop Satellite P205-s6307 comes with Vista Home Premium.

  Because of all the clutter that came pre-installed, I reformatted the drive and installed Vista Ultimate, which is great.

  Since then, the webcam control panel who once appeared on the sides of the screen whilsts flying over the mouse disappeared.

  I checked the drivers in Device Manager and they have loaded OK as "Chicony USB 2.0 Camera"

  Can someone help me solve this problem?

  Thank you very much

  Hello

  I read on several issues webcam Chicony here in the forum, but I see this question for the first time.
  I guess that the software has not been installed correctly. So try to remove the system from the old software and install it again after restarting laptop news.

  I hope it helps.

  Best regards

• My built-in webcam icon disappeared from my taskbar and now I can't start Help!

  Ive recently bought a Dell Inspiron 1720 with a built-in webcam. When I started the laptop was down by the icon in the lower right corner, and I could run it from there. But now, the icon disappeared, and when I go to Dell Webcam Central to see if that would help, nothing happens... so where should I go from there?

  Hello

  If necessary check with Dell's Support and/or Forums

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  Dell should have drivers and the control software available on their site. Please refresh your
  If possible driver and reboot before you load the new driver. Search for control software as appropriate.

  http://support.Dell.com/support/downloads/index.aspx

  Help generic camera:

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• After you disable the built-in webcam, imaging devices disappeared from the Device Manager. How can I make it reappear if I can activate my webcam?

  Hello

  After you disable the webcam integrated my laptop ASUS N80V, imaging devices disappeared from the Device Manager.  I use Windows Vista x 64.  How can I make it reappear if I can activate my webcam?
  Thank you
  Chris

  First try a system restore to a date that precedes you disabled the camera, it could allow the camera back.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Try reinstalling the camera driver. On my previous Asus link there is a click to download on that link. You must communicate your model number or click on 'Auto-Detection model '.

  There is also a forum on the Asus Support link, you can try to ask your questions here.

  You can also try the update of the BIOS available on the download link and then check if the unit is on.
  BIOS update guide for ASUS laptops
  http://Forum.NotebookReview.com/ASUS/174395-BIOS-update-Guide-ASUS-Notebooks.html

  Take note of the setting warn in red text.

• my webcam on board disappeared how can I get it back

  I'm trying to load Skype but my integrated webcam has disappeared from the ideas how to recover?

  By visiting your laptop manufacturers support site, or their forums, win7 does contain itself any webcam

• Why when I press the webcam icon disappear?

  I have my webcam at the time, but I see no picture, when I press on disappear on the left of the screen

  Hi Michele,

  1. What is the number of brand and model of the computer?

  2. don't you make changes on the computer before this problem?

  This problem may occur if the webcam drivers are corrupt or missing. Try to run the troubleshooter of material to check what the problem is and fix it accordingly.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  You need to update software driver webcam. You can download and install the latest driver on the manufacturer's Web site according to the number of exact model of your laptop / desktop.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Webcam has disappeared. Dell Vostro 1220 Windows 7 32 bit

  I have the same situation as others reported.

  My webcam has disappeared from the system.

  Device Manager does not display a section imaging and I can't find any reference to the camera or webcam.

  I tried to reinstall the driver for the webcam, but it ended with an error message and my webcam is always missing from the system.

  The Dell Diagnostics checked the complete system with the results: "Dell PC Diagnostics did not identified the faults of material.

  A permanent solution to this problem?

  Edit: I ran Diagnostics again and this time more precisely on the CAMERA.

  The result was "... the applicable device there is no.

  Hi Renon,

  I said to friends as you suggest but anyway my webcam started working today after I logged in but later on subsequent connections, the unit has been even once not recognized by the system, and at the present time, there is no camera in the Device Manager, Skype or anywhere else on the computer.

• U350 webcam stopped working, Device Manager disappear.

  Hi all

  I'm hoping to get some help here. I have seen that other people had similar problems, but no satisfactory solution that applied. So go again us.

  I bought a U350 with Windows 7 home basic 32-bit.

  He came with a Bison/Lenovo Webcam which worked fine when I bought it. I usually use the camera with Skype.

  Yesterday, when using Skype, I noticed that the camera was gone, dissappeared.

  It does not show when I hit FN + ESC. I have reinstalled Power Manager, always the same question.

  It shows nothing in Device Manager. Imaging devices have disappeared.

  When I tried to add a new device imaging and added manually and stressed the downloaded driver, the driver installation begins. Then suddenly it stops with a warning saying: "no device in the setup.ini file is on this computer.

  I can't uninstall anything, because I don't see anything in the Device Manager. I can't install any drivers as the material seems to be undetectable.

  My wild guess is that the Webcam has stopped working or is disconnected from the motherboard. But maybe you have clues othere what this could be? Not detected by Device Manager means that the material is broken?

  Thank you very much!

  AJ

  If you script site and it has not detected any camera, possible problem of cable, connector or camera.

  I suggest you call lenovo support line and ship your laptop.

  Edit: because you need technical support, I've marked this issue as resolved.

• MIC disappeared and fix did the webcam only work sometimes

  My built-in microphone made me sound like I was chewing on snails. I reinstalled the sound drivers and finished with ONLY and WITHOUT microphone sounds, it seems be separated micro motors. I heard someone reinstall the webcam as it is related to the micro, but now the webcam works only sometimes. He lights up a bit on this little thing of racing cars, but it does not appear on the face recognition at all.

  I've also upgraded to Vista SP2, I uninstalled the webcam and sound, but they were just reinstalled automaticall with no microphone.

  I am confused on this.

  Have you tested mic with headphones?
  I mean is this problem associated with internal microphone only microphone?

• How to enable the USB Support after that it disappeared from all USB keys on computer, so that the Webcam & printers no longer work?

  My Canon printer and my HewlettPackard printer-copier-Scanner, as well as my Web Cam just stopped working, and when I checked the Device Manager, I found that (IP), (PPPOE) WAN Miniports and (PPTP) had all of their disabled drivers.   I'm unable to re - activate these drivers, and my Web Cam and printers were not included.    Restoration of the system, and many re - start didn't help.  Microsoft Fixit did not help.   Can someone please help me solve these problems?

  Hi WaggaJohn,

  1. What happens when you try to activate?
  2. You receive an error message?
  3. What happens when you connect the webcam to the computer?
  4. How the printers are connected to the computer?
  5. You are able to use other USB devices on the computer?

  The WAN Miniport driver on Windows XP system allows to connect to some networks such as networks wireless large-scale.

  Method 1

  I suggest that you uninstall all the software driver for the webcam and the printer to the computer using Device Manager and Add/Remove programs and then reinstall the updated driver from the printer manufacturer website and check if it helps.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 2

  If no USB devices are running on the computer, then I suggest that you uninstall and reinstall all the computer USB controllers and check to see if it helps.

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer to Windows reinstall all USB controllers on the computer.

  Check if the problem persists.

• Software of the webcam seems to have disappeared.

  The webcam works properly according to the Manager of devices and drivers up-to-date, but without an assistant camera how do I use it? Can I download the software and if so where?

  The response has been useful in itself, thank you, but my question did not have enough detail. Pilots are not the problem, it's the missing Deputy Camerea inexpicably software. I have a Chiciny USB 2.0 internal camera to my laptop. I finally found what I was looking for on the internet, and it works. I know another time if I need help I need to include the amount of detail.

• Webcam for inspiron N4010 disappeared

  My webcam has always worked beautifully, on Skype and windows messenger.  All of a sudden my computer, inspiron N4010, tells me it "cannot detect' it... or not installed webcam.  I tried to download new driver... I am at a loss. ???

  Hi KatrinaNeber,

  1. you remember to make changes to the computer, after which the issue started?

  2. using built-in webcam or external webcam?

  I suggest that you want to run the system restore both before the problem started and check if this may help:

  System Restore: frequently asked questions

  I hope this helps.

• My HP 6735 s webcam has disappeared from the Device Manager... has worked very well in the past... where is he now please?

  Webcam worked for months but is not, nor in the Device Manager. When using Skype it says buy a webcam!

  Hello

  I suggest you to follow the steps from the link provided below and check if it helps:

  HP Notebook PC - test Webcam Vista with QuickPlay
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00865850&lang=en&cc=UK&TaskID=125&ContentType=SupportFAQ&prodSeriesId=3687621&prodTypeId=321957

  Hope this helps,

• in the latest flashplayer webcam does not work, firefox 12 turns off old flash, a beautiful!

  I have installed the latest flash, like I always do, but my webcam is not working with it (a known issue at adobe)
  Their solution is to install an older version of flash.
  It worked well until today firefox decides to turn it off and force me to update flash.
  I can decide which version to use thank you very much, please?
  It's really annoying, the card has disappeared from the list, so I can't allow it even if I wanted to...

  you need to install the file flashplayer11_1r102_63_win_32bit.exe from the link you posted - the ax version is the only IE (ActiveX).

  It works for me on firefox 12, nothing is blocklisted or disabled here, the plugin appears in the Manager addon that Shockwave Flash 11.1.102.63.
  When I perform a sweep of plugin, flash appears as outdated but not further is pronounced. the message "flash has been disabled" on the mozilla plugin check page was probably just incorrect as it is displayed by default in certain situations (see bug 633285).

  If you're still having problems, I would recommend that you delete the file named blocklist.xml in your firefox profile folder and disable the plugin getplusplusadobe16263.