disc eject does not correctly persist

I get several error messages that my external hard drive was not ejected correctly. I ejected it, turned off, unplugged and then reverse the process. Whenever my screen locks when I open it there are several messages not eject disks does not correctly.


Restart your Mac, and then drag the disc on the desktop for the external drive to the trash.

Tags: Mac

Similar Questions

  • DeskJet 970Cxi impressions eject does not correctly

    He pushes paper most of the exit door, so that the printer considers that it has finished and starts printing the next sheet.  But sheet n ° 1 is not far enough to lie flat on the output tray, so something in the works mechanical grabs the back of it and snarls to the top of the next sheet as well.  And so on, so I have to look at the printer like a Hawk and whisk every leaf there at the right time precisely.

    I hear fairly well with mechanical things and feel that it should be simple to put it right, if only I could observe.  But everything happens too fast, in more of course, it will not be printed with the cover open.  The only clue I can see is that the main action of the spin is on one side.

    Everything by moving the printer a year or two before, I made the mistake of putting on his side briefly.  It is the only cause I can think of, although it doesn't seem to affect his performance (once I had cleaned the ink off everything!).  Recently started paper supply problem.

    I bought a new printer to use when I need high quality images, as I work with them and need the settings that the printer Deskjet does not more (as I now have Vista).  But I do a lot of writing too and hoped to operate using my Deskjet nice, reliable as a workhorse for the text (and images of basic, every day).


    This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

    Good luck!

  • Satellite Pro L300: DVD drive eject does not & recognizes not all disks

    Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

    Please help someone,

    Thank you very much.

    What kind of help do you expect?

    You mean he s a software problem?

    I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

    The laptop seems to be is not very old, and I think that the guarantee must be valid
    How about you, communicating with ASP in your country and ask for a replacement WEIRD?

    I think this helps

  • My computer does not correctly display web pages?

    On some web pages the boxes are stacked, for example on the MSN homepage ads pop up in the left corner of the screen on the top of the page instead of on the right side, and on the right hand side where they should be it's an empty box? Other pages display does not correctly? I don't know how to fix this or why it happened?

    Hi ChristineDupre,

    1. what browser do you use?

    2. don't you make changes on your computer before this problem?

    If you use Internet Explorer, you can follow these methods & check if it helps.

    Method 1

    You can follow this link and check if the problem persists.

    Some sites Web may not behave as expected in Internet Explorer

    Method 2

    If you have Internet explorer 9 installed, please follow this link.

    Web pages displayed incorrectly in Internet Explorer 9

    Hope the helps of information.
    Please post back and we do know.

  • Request close does not correctly after the addition of SceneCover (QML)

    Just added a SceneCover exposed to QML, wanted to change my implementation of shit,

    Page {
        onCreationCompleted: {        Application.setCover(sceneCover)    }
      attachedObjects: [
          // An Active Frame is a Scene Cover      SceneCover {          id: sceneCover          content: Container {              background: Color.create("Black")          }
    #include "applicationui.hpp"
    //#include "ActiveFrameQML.h"
    //#include "OrientationSensor.hpp"
    using namespace bb::cascades;
    ApplicationUI::ApplicationUI(bb::cascades::Application *app) :
            QObject(app) {
        displayInformation = new si::blackberrydev::DisplayInformation;
        qmlRegisterType("bb.cascades", 1, 2, "SceneCover");
        qmlRegisterUncreatableType("bb.cascades", 1, 2, "AbstractCover", "");
        // Create scene document from main.qml asset, the parent is set
        // to ensure the document gets destroyed properly at shut down.
        QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
        // Create root object for the UI
        qml->setContextProperty("display", displayInformation);
        AbstractPane *root = qml->createRootObject();
        // Set created root object as the application scene

    Now, whenever the application closes, it does and does not correctly close until terminated manually:

    It does not show this on the console but I'm not a clue what he is to me: "0x85ab510 error: must be attached to a control, no bb::cascades:QmlPage (0x85269a8).

    Any Suggestions?

    10.2 minimum API level targeting

    I noticed that, while this works, attaching class SceneCover application directly gives an error of bps to the exit event.

    To avoid this error, set the class of SceneCover via ComponentDefinition and attach it to the Application class.

    I have attached a code snippet below:

    onCreationCompleted: {
    attachedObjects: [
        ComponentDefinition {
            id: sceneCoverDef
            SceneCover {
                content: Container {
                    background: Color.create("#000000")
                    Label {
                        text: "hello"

    Try and see if the error persists.

  • with firefox 43 yahoo and yahoo mail doesn't work does not correctly

    With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

    I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

    Thanks for the help!

  • HP jet 7500 a desktop: office jet 7500 a print does not correctly

    After you run the print doctor, cleaning and aligning the print heads that it is still print does not correctly. the first page comes out perfect so the print quality gets worse, with bits wilted and things missing. just print a page of print quality and black looks at all and the first steps of pink and yellow are strong, blue stripes and then 2nd very faded pink and yellow bar.
    any ideas?

    Hey watch this video of HP, how do I solve this https://www.youtube.com/watch?v=c422Q-EhMXI if this fixed your problem can you give me a point of congratulations. Thank you

  • I have an index page that does not correctly load the css and css works on all other pages of the site.

    http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.

    I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

    Any help or suggestion looking for something would be appreciated.

    This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

  • Toshiba Recovery Disc Creator does not work on my Satellite P300


    I need to make my drive recovery for my Satellite P300 (PSPCCA-05V01Y), but the Toshiba Recovery Disc Creator does not work, as it is said that it is not a file on the pc HARD drive recovery.
    I tried before, and he had a problem with the core files, saying he was corrupt.
    So I was wondering if there is in any case I can download the installation of HARD drive recovery so that I can install and put it back to "factory condition" and reburn the recovery disk?
    Cheers for any help

    Hello Mikey

    The situation is quite complicated. When you've got your laptop recovery files was recorded on the second partition in folder HDDRecovery. The second partition and backup files should not be modified.

    If you did something with the second partition or this file recovery Toshiba creator cannot find these files and the recovery media cannot be created. This will work with the factory only settings. but I see another problem there.
    Theoretically, you can now install new OS using the installation procedure of recovery HARD drive and with factory State, you should be able to create DVDs, but if the Toshiba Recovery creator can not find the files I'm afraid that the installation of HARD drive recovery can have the same problem.

    If you want you can test. Try to start the installation of HARD drive recovery.

  • Satellite A210 - 19(d) - Toshiba Disc Creator does not work after last update SP2

    Satellite A210 - 19(d), HomePremium Vista 32.
    Toshiba Disc Creator does not work after update to sp2. Error code is 32007C-26-00000001.

    He needs to click ok up to 17 times to eliminate the error window, but it is more.

    Everything was OK before sp2.

    Please take a look in this thread:

    It user pdun459 had the same error using the Toshiba Disc Creator and could solve this uninstall and installation of this new

  • Satellite A200 does not correctly reduce or increase the volume


    Our Satellite A200 is having problems with its Volume control wheel.
    If I turn the wheel (on the left or in the past), it does not correctly to reduce or increase the volume level.
    He jumps rather the volume level in seemingly random directions (with a preference for the volume).
    Turn the wheel slowly improves responsiveness a little, but it remains quite impossible to increase or decrease the volume control that to be.

    BTW, I am well aware that the volume control wheel is a wheel of puls-encoder rather than ye olde potentiometer.

    -Can anyone you tell me where I can find the configuration that is responsible for this Volume control wheel?
    -Which driver/firmware is attached to the order of the volume control?
    -How can I determine if this is a hardware or software problem?

    Advice would be welcome.



    There is no software or hardware problem.
    It is a new generation of volume control.

    First of all there is no mechanical limit turning right or left.
    In addition, this volume controller works a little different than the old volume controllers. The volume can be increased and decreased using the fixed rate

    By the way;
    > Can someone tell me where I can find the configuration that is responsible for this Volume control wheel?
    You can change the volume as in the sound settings that could be found in the control panel.
    > Which driver/firmware is attached to the order of the volume control?
    Audio driver controls the volume controller.
    > How can I determine if this is a hardware or software problem?
    There is no problem

  • error code 259 does not correctly updated to sp62736.

    I have a Hp Pavilion 500-141ea im trying to update the IDT audio driver for windows 8, I supported SP sp62736, it passes through the installation procedure, then it stops and comes up with this error code 259 does not correctly updated, I even disabled etc still the same antivirus software.

    Any idea?

    Hi Apache1968,

    If everything works at the moment, with the exception of downloading then I would leave it as it is. The whole "don't mess with what works" thing.

    Thank you

  • Why is one of my 4 5893 Modules doesn't work does not correctly?


    This is the configuration of my HW and SW:

    LabView 2013 SP1

    1 x cRIO 9076

    4 x NI 9853 CAN Modules

    CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

    CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

    I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

    So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

    While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

    I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

    I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

    Thanks for your help

    I solved the problem, it was an error of configuration on my side.

    The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

  • Update KB976902 now the mouse doesn't work does not correctly

    I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

    The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

    I did a restore on a single computer, but it did not help.

    Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

    NB: If a step said to reboot, reboot!

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

    4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

    5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

    6. restart a last time & test.

    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • My cd-writer/DVD disc tray does not open when I press the Open button. He is not blocked and has no disk in it. How can I me t to operate?

    Cd-writer/DVD disc tray does not open when you press the Open button, or when you use the buttons to control the media on the keyboard. How can I restore it to its operating state?

    Hi John,.

    Please let me know exactly what happened when you tried my suggestions of first and second.

    Of your most recent post, looks like you're watching the wrong part of the Device Manager. Optical drive is listed under "readers of CD-ROM/DVD-ROM". The info you gave appear under "drives". If the drive is not listed under "readers of CD-ROM/DVD-ROM" or there is no such section in Device Manager, then Windows do not see. If windows can't see it then this means that there is no power or that the drive is broken.

    When you pushed the drive back in, the player no longer has much of the book or did you have to push all the way. If the latter, it means that the drive has no power or is broken.

    With respect to the opening of the case, I guess I should ask first if it's a laptop or desktop?


Maybe you are looking for

  • The Firefox icon is missing in the upper left corner of the screen.

    Many of the instructions start by click on the Firefox Button. Hard to do when the button is not there.

  • Search engine does not work.

    The google search engine thingy next to the web address does not work. I can type stuff in there, but pushing enter or the magnifying glass does not get for research. For some reason, it seems to work perfectly on privacy, but not regular navigation.

  • Why apple does not have a Dual SIM iphone?

    Why apple does not have a Dual SIM iphone? I have 2 numbers and one of the members of my family has 4 digits. We both prefer to have an iphone with a Dual-SIM and member of my family would rather have 2 iphones with dual sim each, rather than an ipho

  • Questions about graphics cards in W500

    Hello I have a 2HU W500 4061 old but faithful with all drivers up to date. The switchable graphics option is enable in BIOS. The laptop is running windows 7. How to know card wich is being use. I check with application of information material and the

  • Aspire drivers audio 5-581T not properly download

    I worked on this problem on mine for about a week now. I'm not entirely sure how to begin to explain, so I'll just do a summary of noticeable issues. Hovering over the "speaker" icon gives me the text "no speakers or headphones are plugged." I use th