Disc not visible in Win2008 server scope.

Similar Questions

• Folder not visible on Windows Server 2008

  shared new folder on the file server is not visible until I have update and also not disappear after deleting until I update

  I use Server2008re Windows server and Windows XP as a client Machine.
  Pls help

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• DVD disc not visible / Ko 314060 necessary clarification

  Background: following a fresh install of Windows 7 on a new hard drive, the DVD drive in my laptop (Dell XPS M1730) was not visible. I bought the laptop computer with an earlier version of windows, and everything worked normally until the original hard drive crashed. When the DVD was not recognized after the clean install, I assumed at first it was a hardware problem and bought and installed a new DVD player. This does not resolve the issue. The DVD player itself performs a power upward when the system is turned on. It opens and closes normally. It turns when a DVD is inserted and then slowed down after a minute or two. To troubleshoot I started working at Ko 314060 (your CD-ROM or DVD drive is not recognized by Windows or other programs). http://http://support.Microsoft.com/kb/314060

  The first three resolutions has not remedied the problem.

  Question: I am unable to follow the steps in resolution 4 as written. Step 3 says "In Device Manager, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Surdesinstaller." My Device Manager does not a selection of ' readers CD-ROM/DVD-ROM ", I'm looking for clarification on the procedure of resolution 4 update or reinstall the driver.

  This is what my device manager:

  Solved.

  After leaving open the Device Manager and the laptop unattended for an extended period (over an hour), I returned to find a pop up advising me that the DVD device driver has been installed, and a selection of CD-ROM/DVD-ROM had been added in the Device Manager. The DVD is now visible.

• PowerEdge R710 and perc h700, disc not visible in OS

  Hey,.

  We have PowerEdge R710 with perc h700 raid 5 controller physical drives under raid6 running. We have recently added a sixth of the road which is much smaller (512 against 4 TBS) we want to just format and use it as a normal drive in the OS (Ubuntu 12.04.5).

  However, the drive is not visible in the operating system. When you enter the settings of the RAID controller that it says that the drive is READY but not configured and all the options to the title of operations are grayed out. How can we make this hard drive is visible in the operating system?

  See you soon

  The H700 does NOT support non RAID, so all records first must be configured on the controller, before its presentation to the BONE. You must configure (initialize) as a single drive RAID 0.

• How to eject a disc that is not visible on the desktop

  I have a DVD-R, stuck disc in the drive of an iMac computer. The icon is not visible, so it cannot be moved to the trash and the eject button is not visible either. I only seem to have problems with DVD-R discs or it may be a coincidence. Any ideas would be appreciated

  CD/DVD - Eject stuck

  CD/DVD - Eject stuck (2)

  CD/DVD - Eject stuck (3)

  CD/DVD - Eject stuck (4)

  CD/DVD - Eject stuck (5)

• If the Photos are not Visible after their exportation from Photos for Mac

  Export of Photos may write JPGs invisible on the disc, if the photos are exported with the option ' file name: use the title.

  If the first affected user a title to the picture, the deleted the title text, photography will have an empty title and the exported photos will be simply named ".jpg" and treated as invisible system files.  This bug can fill the disk with lots of image files, which are not visible in the Finder, unless the hidden files are made visible.

  User bikedaveca reported this bug today:

  See discussion: exported photos do not appear in the Finder

  More in this tip of the user:

  Bug: export of Images with "file name: U title" exports the files as Invisible, if the title has been deleted

  As a precaution, keep at least one printable character in the title field, when when you remove a title from a photo, so you can see, she had a given title.

  As a test, import three new pictures, for example:

  

  The first has a title, the other had a title, but removed, the third one never had a title and watch "Untitled."

  When I select and export them with ' file name: use Title ", only two photos will be displayed in the Finder.

  The problem is, that deleting a title does not remove the title, but adds an empty title. If the photos are exported with the filename ".jpg".

  

• Re: Qosmio X 500 - USB IDE drive not visible external HARD

  Hello

  Someone was kind enough to educate myself on this problem?

  How to view the contents of an IDE hard drive connected to the USB port on my Qosmio X 500?

  -The drive is already formatted and filled with data
  -LED lights on the outer box, but the disc is not visible in the browser...

  I got my old laptop internal hard drive and I bought a box to be able to connect to the USB port on my Qosmio in order to get my data...
  What is the problem?

  The hard drive come from 32-bit Windows XP and Qosmio with seven 64-bit...

  I need to install a special driver? use a specific software? or configure specific settings?

  Thank you...

  > What is the problem?
  Who knows? If other discs hard USB can be connected properly to the Qosmio laptop, the problem might be related to the connected HARD drive.
  So I recommend this external USB with other computers.
  If the other computers will not recognize it, so the external HARD disk is a problem

  > additional power supply is probably necessary for a HARD drive
  Maybe my HDD USB requires a cable that can be connected to the two USB ports

• R7000: UPNP Renderer not visible when connected via WiFi

  Hi all

  I use the R7000 as a router and I have the problem that my UPNP renderer (Denon DNP-F109) is not visible if connected via WiFi (via Ethernet, everything works very well).

  Can someone give me a clue what to do here?

  I went on DHCP and UPNP in the configuration. All UPNP (Server/converter/controller) devices are in the same 192.168. * network.

  Thank you very much

  Stefan

  Hello Stefan,

  Please perform a reset of the device and check again if still the same problem.

• Active Directory users & computers does not open in MS Server 2003 Enterprise 64-bit?

  Hello

  Active Directory users & computers does not open in MS Server 2003 Enterprise 64-bit?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• My iPod cannot be identified in itunes and it is not visible in my computer.

  I have a brand new iPod nano 5th generation and an operating system of windows XP with service pack 3 on my laptop.  I installed the latest version of itunes and when I plug my ipod in my computer, as expected, itunes opens, but an error message comes up saying:

  "An iPod has been detected, but it could not be identified properly.  Please disconnect and reconnect the iPod and try again. »

  The iPod is not visible in 'My computer', although when I plugged it for the first time the usual Hardware Wizard came and said that the equipment has been properly installed and ready for use.
  I have contacted Apple support and traversed their options such as "5R" including reset my iPod, reinstall itunes, restarted my computer, etc..
  I tried to connect my iPod to my friends laptop and itunes has identified immediately so there is obviously no problem with my iPod or USB cable.
  I have nothing else plugged on the other USB ports and tried to plug the iPod into USB ports in case there was a problem with one of them and I have also disabled all power save options for the USB ports so that they operate at full power.
  I tried to run my iPod in disc mode as suggested on the Apple support site, but it is not yet recognized or visible in my computer.
  I tried with firewall and antivirus disabled, but I still get the same message.

  I would be extremely grateful for all the suggestions I've tried everything I can think of!

  Best regards, Liz stables

  In Device Manager uninstall your USB ports/hubs. Re-start. XP will 'find' and install the drivers/software.

  Then plug in your iPod.

  For the other posters: there are 2 versions of iTunes - 32-bit and 64-bit. most people will need the former, the latter is for Vista and W7. Do not try to install a version 64-bit on your 32-bit system, you can't.

  See you soon,.

  Jerry

• I have IE6. I need to install service pack 1 Windows XP. I can download it, but I can't install it because it does not connect to the server. How can I work around this problem?

  I recently had to use the restore disc that came with my computer. Accordingly, I now have Internet Explorer 6. To switch to IE7 or IE8, I need to reinstall the Service Packs. I can download them, but I can not install them because I have IE6 and downloads could not connect to the server. How can I fix?

  Hi wildcar

  You can go directly to Windows XP SP3 . Download and install it from the link below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the text that says: it is only intended for Professional computer and network facilities.

  Important note: If your system has an AMD processor, download them and install Microsoft windows update utility for the processors not intel from the link below, before you install Windows XP SP3.

  Update for Windows XP (KB953356)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=23751

  After you are done you can try to install ie8 again, if it has not already been offered through windows update.

• How can I activate CCI? Not visible

  The BCC function is not visible on my system of owa.  How can I activate it?

  Hello

  Your Windows application would be better suited in the TechNet Forum.  Please post your request in the Forum of the Exchange Server.
  http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/threads
   
  I suggest you to check with your mail server administrator or Internet Service Provider, who manages the configuration of your OWA.

• HP 15 laptop: DRIVE HARD DO PARTITIONNE NOT VISIBLE AND INITIALIZATION is NOT POSSIBLE

  My laptop worked fine until that currently when my brother introduced it is impossible to return to the start and the error message indicating that "no boot found device, took it back to where I bought it and they have installed a Windows 8.1 which worked for about 3 hours, then began trolling." tried to restart it to see if it will win its normal pase but it never restarted, it opens but could not pass the HP logo in the middle of the screen, when I took it back to the shop to check. They tried to reinstall the operating system, but the hard drive partitions are currently not visible. Help, please.

  This message indicates that the file system is damaged, and as a result, one or more of the boot loader files is no longer working properly.  The general solution - that no matter what RENOWNED repair shop would know well - is to start repairing Windows Media and run Startup Repair machine, probably three times.  If that did not set her, the next step would be to start the computer from a hard disk utility and run a file system check.  If defective, which would be more likely to say that the hard drive was not - and then only, the reader will have to be replaced and windows resettled.

  In addition, Win8.1 comes with quick start already on.  This force the machine to fall into a new form of hibernation when you stop - preventing access to the disk partitions hard while they are in this State.  Once more, any store repair FAME SAURIEZ cela and told for sure you.

  Looks like where you bought is occupied by people who are incompetent when it comes to diagnose and repair Windows PCs.

  I assume the unit is no longer under warranty, otherwise you would have contacted HP for repair.  But, that being said, your first step should be to contact the HP Support to see if you have repair options: Contact HP customer service | HP® customer support

  An alternative would be to buy a new hard drive, order of HP recovery materials and use it to reinstall the machine.  See the details in the link: HP computers - getting HP discs recovery or a USB HP recovery disc | HP® customer support

• DVD/CD drive is not visible in the Device Manager, but it works.

  Original title: My dvd/cd drive is not visible in the Device Manager but

  This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

  Hello

  See the methods listed in the article mentioned below.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  See this link to view the hidden devices:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  I hope this helps!

• I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information?

  Taché product key

  Hello

  I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information? The laptop currently has non-OS I've tried to reinstall.

  Thank you

  Scott

  Product keys are bit-agnostic - they don't care if it's 32-bit or 64-bit.

  However, cannot legally use the recovery disk from one computer to a different constructor machine - as other licenses are not properly paid..

  There is nothing nonetheless to try all possible variations on the absence of character (there are only 25, after all the )

  Other than that, your best option is to contact the manufacturer and order a set of recovery disc for the machine. I do no download available for Vista with SP2 - but you can download Vista with SP1 and create the disc.

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links