Disconnection of this phone Lync 2013 Common Area

Similar Questions

• N2024P configuration MS Lync 2013

  We need to configure a few Dell N2024P for Lync VoIP switches, in addition to the QoS DSCP global configuration you aware Lync needs to divide the network into two VLANs or is not necessary and prioritize traffic via DSCP is sufficient for the voice quality?

  Here's the current scenario:

  The Lync server is hosted by an outside vendor cloud/VoIP, we connect customers through Lync 2013 autodiscovery without any problems, the majority of IP phones is CX600 for MS Lync and the rest are phones USB CX300 or MS LifeChat headsets 4000 USB.

  Each seat having Ethernet that a slope, the CX600 GB is connected to the local network and the computer to the phone. In all other cases the computer is connected to the local network.

  Thanks in advance for your help in this matter.

  The server DHCP will need a scope up for 10 VLANS. And the switch will have to relay DHCP of the VLAN 10 queries to the VLAN as the DHCP server is on.

  Here is some info on the establishment of several bodies in 2003.

  http://bit.LY/1H4Srkz

  Page 1139, guide the user passes over the DHCP relay config.

  http://Dell.to/1NZmFET

• Bad_Pool_Header BSOD on several PC randomly after installing Lync 2013

  We just deployed Microsoft Lync 2013 in our Organization.  In fact, we have about 18 machines Windows XP left so they Lync 2010, but on 100 machines Win 7 with 2013.

  Since this installation, there were a few random BSODS multiple computers and they are usually BAD_POOL_HEADER and it refers to two files, ntoskrnl.exe, and win32k.sys.
  That they come from different machines, it cannot be the corruption of the local memory.  If it's a particular machine I would exchange the RAM, but it is not that.
  Windows 7 Pro 64-bit machines.  Office 2010 32-bit.  The last change is Lync 2013 15.0.4517.1004 MSO 15.0.4517.1005 32-bit.  Before deploying Lync 2013, I did have one of these reports.
  The BSOD is random.  Not necessarily the same PC every day.  Maybe 3 or 4 BSOD's a day from different people.  But you really try to determine what is happening here until things get worse.  Also, we run Vipre Antivirus Business.  It is configured to exclude *. OST files, just to help the stability of Outlook 2010 for those who use laptop computers in cached mode.
  Any idea?  I've been collecting dump files.
  Thank you!
  MODULE_NAME: nt

  FAULTING_MODULE: fffff80002a4a000 nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 5147d9c6

  BUGCHECK_STR: 0x19_20

  POOL_ADDRESS: fffff900c093e000

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from fffff80002bf2cae to fffff80002abfc00

  STACK_TEXT:

  fffff880 '0920cdb8 fffff800' 02bf2cae: 00000000'00000019 00000000'00000020 fffff900 'c093e000 fffff900' c093e840: nt + 0x75c00

  fffff880 '0920cdc0 00000000' 00000019: 00000000 00000020' fffff900 'c093e000 fffff900' c093e840 00000000'25840000: nt + 0x1a8cae

  fffff880'0920cdc8 00000000 00000020': fffff900 'c093e000 fffff900' 00000000'25840000 00000000'00000000: 0 x 19 c093e840

  fffff880 '0920cdd0 fffff900' c093e000: fffff900 'c093e840 00000000'25840000 00000000'00000000 fffff900' c093e840: 0x20

  fffff880 '0920cdd8 fffff900' c093e840: 00000000'25840000 00000000'00000000 fffff900 'c093e840 fffff880' 0920cf20: 0xfffff900'c093e000

  "fffff880 '0920cde0 00000000' 25840000: 00000000 ' fffff900 00000000 'c093e840 fffff880' 0920cf20 fffff880 ' 0920cf10: 0xfffff900'c093e840

  fffff880'0920cde8 00000000' 00000000: fffff900 ' c093e840 fffff880 '0920cf20 fffff880' 0920cf10 fffff800 ' 02ac8d32: 0 x 25840000

  STACK_COMMAND: kb

  FOLLOWUP_IP:

  NT + c 75 00

  fffff800'02abfc00 48894c 2408 mov qword ptr [rsp + 8], rcx

  SYMBOL_STACK_INDEX: 0

  SYMBOL_NAME: nt + c 75 00

  FOLLOWUP_NAME: MachineOwner

  Nom_image: ntoskrnl.exe

  BUCKET_ID: WRONG_SYMBOLS

  Follow-up: MachineOwner

  It seems that the PC that had the problem had a fntcache.dat of different size, so if that were the case, hopefully regenerating the fntcache.dat will fix the problem.

• IOS 10.0.2 | Unable to activate Touch ID on this phone.

  "Impossible to activate Touch ID on this phone."

  All of a sudden I had this error after upgrade to ios 10.0.2.

  All of my info stored fingerprints are more there... all gone.

  I tried to turn it on, but it keeps saying 'IMPOSSIBLE '.

  It won't let me even add new to fingerprints.

  Tried resetting but no luck.

  No matter who he meets same question?

  Sorry to hear that. I am also facing the same situation. I tried:

  -Reset

  -Downgrade to 10.0.1
  -Downgrade to 9.3.5

  None of them work

  

• I wanted to pass on my old iPhone 5 in order to do that I deleted my iCloud account out of this phone, or say that I thought, I went to delete e-mails and other things, it turned out that the data also has been deleted my iphone6 and my iPad... Help me pl

  I wanted to pass on my old iPhone 5, so I went to remove my account iCloud out of this phone, or so I thought. I went to delete the email, etc. out of this phone, it turns out that he has also deleted all my data on my iPhone 6, which is what I use, as well as on my iPad. What should I do now? Help please

  Don't know what you were doing.  If you removed real emails, then they are in your email trash folder.

  All you have to do is to restore as new iPhone before giving it away.

  Read this article:

  What to do before you sell or give away your iPhone, iPad...

• Y at - it a clear indicator or a code to indicate if a stick of RAM is registered or unbuffered? I would like to know for sure before installing additional RAM for this Mac Pro (2013). Thank you in advance. David

  Hello, all:

  Y at - it a clear indicator or a code to indicate if a stick of RAM is registered or unbuffered? I would like to know for sure before I add that extra RAM for the empty slots this Mac Pro (2013) that a 2 x 8 is installed.

  Thank you in advance.

  Appleharvest

  Post edited by: AppleHarvest (typo corrected)

  The 4 and 8 GB sticks are not saved while the sticks of 16 and 32 GB are registered. As you seem to know, you can not mix registered and unregistered sticks. For example, you can only add 4 or 8 GB sticks to your present 8 GB sticks

• My husband bought me this iPhone in Singapore on 5 September 2015. The touchscreen is unresponsive. Apple says that this phone was purchased from Japan:

  MY phone was purchased in Singapore Sep 5, 2015. The touch has not worked since the first day. I contacted Apple support, but they say that this phone was purchased, in Japan, more than a year back. The guardian of the store said he bought the live phone from Apple. I am stuck with a phone that does not work. Apple is of no help.

  You don't say if the phone was bought from an official Apple store or reseller Apple in Singapore.

  I have phone warranties are not international.

• integration of lync 2013 with cisco vcs - c

  Hello

  I found a lot of documentation on integrating to Lync 2010 with VCS - C, but can't find much on the integration of Lync 2013.  Could someone shine some light on this for me?
  Thank you!

  Hi, David,.

  It would be preferable that you contacted Cisco re: integration

  https://supportforums.Cisco.com/thread/2181356

  Cisco PDF

  Or try to repost your question to the TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/ocsinterop/thread/319f9e94-f7ec-4c6e-994C-f5412e345e2e

• LYNC 2013 to replace the PBX

  Hello, I need to know a few things about MS Lync 2013 before deciding to implement in our Organization. I'm looking for the solution of IP telephony. I currently have a Panasonic PBX. I can implement LYNC 2013 to replace the PBX. If so, how can I connect external telephone lines? How to receive calls on the company's phone numbers? How can I call a customer since the company's telephone lines? and how to handle it all?

  Thank you

  Hi Jihad,

  Thanks for posting your query in Microsoft Community.

  The question you have posted is related to Lync 2013 and would be better suited to the community of TehNet.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/Lync

• WIP330 - What's up with this phone?

  I just got the phone SIP Linksys Wireless G (WIP330). I was intending to use this phone for our new Asterisk based IP telephony system. Setting in the phone service was child's play, but there are weird things on this phone that make it almost unusable for anything other than her overhaul.

  Problem - a voicemail

  There is a section voicemail under phone settings where you can enter the phone number to your voice mail. Very well, very well. For once I enter my voicemail number, how to retrieve my voicemail? There is nothing in the documentation or in the phone settings that says how we are supposed to retrieve voice mail, once we enter this number. Shouldn't there be a big friendly button somewhere marked voicemail?

  BTW, the documentation of Linksys says this about voicemail, "to learn how to check your voicemail, call your service provider internet phone! You have to be kidding me?

  Problem 2 - No touch tone.

  Since I can't find a button or anywhere speed dial to call my voicemail number. I entered in manually and called it. The problem is, I have to be able to conclude the numbers on the keyboard to access the features of voicemail. If I enter numbers in the keyboard, a separate window will appear showing the numbers, but there is no beep button so that the menu of automated voicemail can 'hear' my selections. I guess this new window is line 2 try to accept another outgoing call.

  These two questions are a deal breaker real for this phone. Here are a few other minor problems that I could live with if this phone solved the above problems.

  • Strange button above the buttons volume control that does absolutely nothing! Are you kidding me?
  • Micro browser. I don't see how this would have no practical use whatsoever. Unless you went to a Web site that has been optimized for the small screen on the phone, it is useless to you try to display a normal Web page.
  • The maximum ringer very quiet. I admit there is a vibration function, but it would be nice to have a ring loud and clear (customizable ringtones would be a plus also)
  • Update website link is broken. www.WIP330.com does not yet exist. Give me a break!

  This phone really has great potential. It seems to be well built. The screen is bright and easy to use. Dial numbers is easy and receive calls works fine. I like options blind for the transfer, transfer, etc.. But the issues mentioned above will stop me buying more of these phones for my company.

  I thought about it. I watched the Asterisk CLI to find errors and when I composed 770 (my voicemail extension) it prompted me to an extension. I entered my extension number, followed by the pound sign. I could see in the output from the CLI, what she actually accepted my extension and then waiting for the password, but for some reason that the automatic reception never says "password". So, basically, you do not hear the password. I'll have to put spaces in the password prompt and see if that helps.

  Anyway, thanks the help of all the world. This phone can be useful after all.

• Integration with Lync 2013 SX20

  Hi, we can integrate a stand-alone end SX20 point with Lync 2013 to make video calls point to point between SX20 and Lync client? VCS control is required between Lync and SX20?  Can anyone help me with any document or on this link?

  No, at this point, a SX20 cannot communicate directly with Lync.

  You will need a VCS running at least version X8.1 of the software.

  The VCS and the Lync Deployment Guide may be of interest to you: http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/X8-1/Cisco-VCS-Microsoft-Lync-Deployment-Guide-X8-1.pdf

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Lync 2013, what is the solution

  To date, Lync 2013 is compatible in some way?

  If a customer makes a migration from 2010 to 2013, runs out of service?

  How long Cisco solve this problem? Hello and thank you all

  One step could be to say to your customers to complain to the 'provider' they always change

  things for the worse, I don't see a real reason why they had to remove h.263. And if they change things why

  they should not be able to support a standard way of h.264...

  We tried at least with the customer of 2013 and which works with the advanced media gateway.

  It will depend on what hardware you have in your network.

  As it comes to the topic future ware, you couldn't get a straight answer here in the Forum.

  I recommend you talk to your Cisco contact to get some information under the NDA.

• Lync 2013 VDI Plugin does not work in Windows 8 with view Horizon 5.4

  Hi all

  I start this new thread as it appears by getting the Lync 2013 VDI Plugin works in Windows 8 is going to be different from that of Windows 7 SP1 and Windows 2008 R2.   The original on Windows 7 and Lync thread is posted here: http://communities.vmware.com/thread/446960?tstart=0

  Here's what I tested and I can determine:

  PC/computer laptop/point of customer #1 endpoint (Client light 10Zig):

  Windows 7 SP1 32-bit

  No installed Office

  Lync VDI 32-bit plugin

  View of the horizon 5.4

  PC/computer laptop/point of customer #2 endpoint (desktop PC):

  64-bit Windows 8

  2013 32-bit Office installed, but the Lync 2013 desktop client is NOT installed

  Lync VDI 32-bit plugin

  View of the horizon 5.4

  VM:

  64-bit Windows 8

  Office 2013 32 bit installed

  Horizon Feature Pack 2 is installed

  Audio redirection works, but the web camera does not have to be picked up.  Its a HD LifeCam Microsoft and is supported by Lync 2010/2013.  I checked the VDI connects to the virtual computer and it seems the plugin Lync VDI successfully syncs.  However, I'm never invited to re - enter my credentials of Lync as I do Windows 7/2008 R2.  In addition, I don't see the 'two PC with the green check mark' in the lower right corner of Lync.  Who should be present after a successful synchronization of Lync VDI.  In fact, there no icons in the lower right corner at all.

  After some further reading, I decided to download and install Skype through shop Windows.  Also, it does not recognize my camera.  In my opinion, the Feature Pack is perhaps the issue here, but I don't know how to dig one more away.  TonyHuynh201110141, any ideas?

  I had a co-worker for his Mac with the new client View 3 trial and Lync VDI works as expected.  I tried again on my side and noticed that it takes exactly 5 minutes to make me a successful pairing.  I remove the Lync VDI plugin, then reinstall to see if that makes a difference.  At least I know that two important data points:

  1 Lync VDI still works

  2. the issue was on only my endpoint device.

  I will update the thread once I know more.

• the display of information on the common area

  Hi, guys from the APEX,
  
  I'm running into a need to display a variable glocal on this common area as the header, {color: #0000ff} region Position 7 {color} is preferred to date.
  
  I understand that I can always add a region on {color: #0000ff} region Position 7 {color} to each page. Is there anyway that I can do once it somethere and the info appears on the header of each page?
  
  Could someone please shed some light on this subject?
  Thank you!
  Alex

  Hi Alex,

  Two ways you can do this.

  You can change the page template that you use more, or you can create a page 0 and regions created on this page are displayed through the application.

  Concerning
  André

• My camera says I can't sign in icloud, maximum nuber os free accounts have been activated on this phone

  When I try to log in I have cloud using my apple ID, it says I can't connect, the number of maximum of free accounts have been enabled on this phone.

  You can connect to an existing account, you just may not make more than 3 on any IOS device. Check if the account to something else, then connect.