Discover the 32 GB not recognized by Rhapsody

I was connected to rhapsody yesterday, no problem. Updated firmware to update today. Rhapsody does not recognize. I have unit set to auto detection. No MSC. I reformatted, still nothing. Any ideas?

It turns out that it was a problem with Rhapsody software. AOK now!

Tags: SanDisk Sansa

Similar Questions

  • HP EliteBook 8730w: replacement of SSD for the boot drive not recognized

    I'm trying to install a Samsung SSD 840 EVO 500 GB instead of the original 500 GB HDD in my Elitebook 8730w (product no. VF889PA #ABG). The 8730w has the latest BIOS (F.20) installed and that is running Windows 7 Professional 32-bit (fully patched).

    When it is connected to the laptop through a USB adapter, to clone the HARD disk image. the SSDS works correctly. Cloning through data Migration Samsung is reported as a success, and the image of the C:\ drive occupies approximately 153 GB. The image of the disc does not include the partition of 1 GB dedicated to HP_TOOLS, due to a known limit of the Samsung software supplied.

    When it is installed in the HARD drive Bay. the SSD is not recognized as a drive and does not appear in the list of startup options. The available boot options only shown are the DVD or a network boot.

    would be very grateful for any advice on the steps required to successfully install the Samsung SSD as boot drive.

    Hmmm.
    Honestly no, I'm not happy with this one. If it was my machine, I'd be a little concerned about whats the corner of the street. In view of the age, is not surprising really, things wear out over time, the mere fact of electronics.

    Search through everything you have posted, all photos, pdf, all the text double checking. I am absolutely puzzled as to what happened. If you 100% does not reinstall the hard disk between the posts above where no HARD drive is detected in the menu boot options for the post below that where the HARD drive is detected in the same menu. I would say that you have a problem with either, the ssd, the computer motherboard laptop or the small connector on the sata port, I think on these is integrated on the motherboard, so it seems that your advice is doubtful.
    If his works now, great... but be aware that your machine can fail at some point in the near future. And it looks like a defect of the motherboard, other things are probably waiting to fail.

    There is no reason whatsoever your laptop must not have seen this ssd at first startup. A HARD drive is a HARD disk, if its compatible sata, then it will work, no doubt. When he is not on an older machine, its probably a sign of a faulty component.

    Looking through your bios options, I recommend the following.

    On startup options, get rid of internal nic pxe boot, that will only slow your machine at startup as it will seek for a network bootable device. This is the message that you get at startup saying Media Test Failure, this page is preventable with this option disabled.
    Less built lan/wlan switching on enabled in the options of the terminal, also change. This means that if you use wifi at home for example and you decide to plug in a cable network directly to the router to speed up the connection, it will not pass if it is not defined, you will have to do it manually. I work in a large company and the number of people who have this option is unreal. They all assume when they are docked they will on the wired connection.

    Because we are here too, if you ever have problems with a flickering screen, first thing to try, is disable the ambient light sensor which is just below this option of switching. Its fine on normally, but its quite common on 8560p for this causes a flickering screen.

    Hope that helped. Good luck in what you decide to do with the machine

  • The dial of the watch is not recognized when I touch it or by scanning

    Sometimes the dial of the watch is not recognized when I touch it or by scanning. This could be the cause?

    Hello

    It can help to restart your iPhone and your watch. Turn both devices off first, and then restart your iPhone before restarting your watch:

    -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

    -To switch on: press and hold the side button until you see the Apple logo.

  • niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

    Hi all!

    I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

    Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

    I also downloaded example c# measure DC Voltsto compare with my request.

    Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

    DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

    I guess it is function of device PXI!

    I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

    NOR-DAQmx 8.9.5

    NOR-DMM 3.0.1

    NI-VISA 4.6.1

    NOR-MAX 4.6.2f1

    Roberto

    Hello Robson,

    Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

    KB 33A96PCW: receive error-1074118656 when running OR DMM screws

    Let me know if this might help.

    Best regards.

  • I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.

    My laptop with Windows XP does not connect to the camera?  How can I reconnect these?

    I have my camera, a Kodak M1033, connected to the computer by a usb cable.  The connection is not recognized.  What I can do.

    Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk

  • Can't burn a cd. The music is not recognized.

    I can't burn an audio cd. The Player recognizes my blank cd, and it says I have 79:57 minutes to burn. But when I add music to the burn list, I always 79:57 free minutes. The music is in the burn list, but I can't start a burn because the music is not recognized. Can someone respond to this please?

    I don't know what I did, but as soon as I played the music button "Start burn" is now available. I didn't understand why the music was not recognized in the burn list because yesterday I did the same thing and I had no problem, but knowing that everything is the same. The music was compatible and the burner has not been damaged, so I guess it was just a temporary system problem. Thanks for answer and sorry for wasting your time :)

  • How the D610 Nikon raw files can be imported into Lightroom 4.4? The files are not recognized by the raw format support in Lightroom

    I bought a nikon d610, when I tried to import raw files in the same way that I had always done with my old nikon d80 before I could not. I got a message saying that the files are not recognized by the raw format support in Lightroom. I also tried with photoshop cc and I couldn't either. Any suggestions?

    Camera Raw plugin | Supported devices

    The D610 was first supported by Lightroom 5.3.

    You will have to pay to

    1. Lightroom 6 upgrade, or
    2. Join the cloud, or
    3. Download the free Adobe DNG converter, convert all the D610 Raw files to DNG, and then edit the DNG in Lightroom 4.4
      Digital Negative (DNG)
  • AIO 600-1055: Win10 did not work & MS could not make it work. Reinstalled Win7 & now the DVD is not recognized

    Have HP AIO 600-1055 Desktop. "Upgraded" to Win10. Didn't work & MS could not make it work. Reinstalled Win7 and now DVD is not recognized

    Hello:

    See run the resolutions listed in the link below the job for you.

    https://support.Microsoft.com/en-us/KB/314060

    #3 or #5 usually work.

  • Windows XP does not recognize the iPhone - device not recognized error

    I am running Windows XP (SP2 I believe) and whenever I plug in my iPhone I get the error not recognized USB device. If iTunes does not recognize it and I can't sync. My guess is that I'm missing or have an updated driver, but I don't know how to install. If it makes a difference, I am using a brand new MacBook Pro and Windows XP via Parallels Desktop. I don't think it's the question, though, as I used to be able to sync with my Manager (ACT!) contacts via Outlook. It seems to be simply a function of Windows is not able to identify the iPhone via USB. A simple solution would be appreciated, but I'll take complicated if that's all that's available.

    Hello abogadopeter,

    Thank you for visiting the Microsoft answers community.

    This question has been a known issue that seems by Parallels. I did some research and read through some of the threads for workarounds. He doesn't seem to be a conclusive solution, but works to some extent. You can take a look at http://forum.parallels.com/search.php and simply search for ipod and look through some of these institutions.

    Hope this helps Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have a problem with the password is not recognized on the computer.

    Original title: sign the windows 7
    • HP dV6 laptop model
    • Known password Windows is not recognized, that is when the laptop is started
    • No new programs have been downloaded
    • It's not windows Notepad 7 in question, I can't get in the windows 7 from do anything.
    • A program to "Find lost password", there are many, help because I am sure that the original password that worked until today has been typed correctly several times since the problem occurred?
    • I've never had a similar problem.
    Here you go:
    1. Set your BIOS so that it uses the DVD drive as its primary boot device.
    2. Start the computer with your Windows 7 repair CD.
    3. Press a key when prompted to boot from the DVD.
    4. Select 'PC Repair' in the menu.
    5. Select 'Repair' when prompted.
    6. When you are prompted, select System Restore.
    7. Configure Windows to a point when your password has always worked.
    8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.
  • slot putting tension of the printer is not recognized

    Printer HP 6700 premium

    wifi mode
    Cannot print car powered is not recognized

     

    Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

    http://answers.Microsoft.com/fr-FR

  • DVD drive on the new computer not recognized

    Hi can someone help.

    My computer did an automatic update at the weekend and now the DVD shows also not recognized.
    I thought about uninstalling and reinstalling would do it.
    Now, I can not reinstall so am without a dvd player on my all-in-one which I desperately need.
    Help!
    Any help would be appreciated
    Thank you

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Fix for CD/DVD drive missing:

    http://support.Microsoft.com/kb/982116

  • New camera.  LR. Don't let me import the photos in the new camera.   Get the following message: some import operations have not been executed.  The files are not recognized by the raw format support in Lightroom...  Application of point 4.4 of Lightroom. 

    L.R., I cannot import the photo of the new camera.   Get the following message: "some files are not recognized by the raw format support in Lightroom."  Click below to view a version update of Lightroom.   Done this and updated Lightroom 4.4.   Still cannot import - get the same message.

    Devices supported by Adobe Camera Raw

    The D610 requires LR version 5.3 or newer.

    If you don't want to upgrade, you can download the current DNG Converter and convert the NEF files to DNG before importing the DNG files.

  • How convince Adobe that serial number assigned to the elements is not recognized?

    I downloaded a new copy of elements and was sold.  The serial number provided is not "recognized" by Adobe for the elements.  So, I spent my money and I can not open the software.

    I removed the two screenshots, but the problem you are experiencing is the order in which you placed is for Windows and as directed by the screenshot you try to use the product on a Mac. Where the question. Best option is to connect with the support that it is replaced or cancelled if the order is within 30 days.

  • panelTabbed-end of the body is not recognized

    Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660

    I would use custom style selectors
    But some are not recognized as af | panelTabbed:body - end. So 'body-end' is not recognized, and in mySkin.css it is highlighted in red.
    I have this code.

    Trinidad - skins.xml:
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <skins xmlns="http://myfaces.apache.org/trinidad/skin">
            <skin>
            <id>MySkin.desktop</id>
            <family>MySkin</family>
            <render-kit-id>org.apache.myfaces.trinidad.desktop</render-kit-id>
            <extends>fusion.desktop</extends>
            <style-sheet-name>css/MySkin.css</style-sheet-name>
            <bundle-name>view.MySkinBundle</bundle-name>
             <!--translation-source>#{dynamicResourceHandler.contents}</translation-source-->
        </skin>
    </skins>
    Trinidad - config.Xml
    <trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
      <skin-family>MySkin</skin-family>
    </trinidad-config>
    MySkinBundle.java:
    package view;
    
    import java.util.ListResourceBundle;
    
    public class MySkinBundle extends ListResourceBundle  {
        public MySkinBundle() {
            super();
        }
        
      public Object[][] getContents() {
         return _CONTENTS;
       }
      
      static private final Object[][] _CONTENTS = {
          
          {"af_panelCollection.LABEL_MENUITEM_QBE","Filter"}
            
        };
    
    }
    and web.xml:
    <servlet-mapping>
        <servlet-name>resources</servlet-name>
        <url-pattern>/adf/*</url-pattern>
      </servlet-mapping>
      <servlet-mapping>
        <servlet-name>resources</servlet-name>
        <url-pattern>/afr/*</url-pattern>
      </servlet-mapping>
    what I am doing wrong or should I?

    Thank you

    Best regards

    The CSS editor registrants in red all selectors of skin with ":" in their names because ":" in not allowed by the CSS specifications in the selector names. This does not mean that the system would not recognize these selectors, because the Trinity compiles internally in the correct format. If my suggestion is to ignore the red color in the editor and try the custom skin that you have configured.

    Dimitar

Maybe you are looking for