Discover the date of release for the corrections

Similar Questions

• Data before release for NOR-6133 trigger material and acquisition continue?

  I use the pxi of NOR-6133 can acquire data on 7 channels continuously with ai0 as the trigger without problems. The acquisition is triggered. What I have to do is collect a finite amount of data before triggering immediately until the trigger is detected.

  Is it possible to do without the help of a software solution. I watched go over acquisition and using the integrated trigger reference but that is not suitable for my needs because it just seems to change the first section of data to be 'post trigger' to 'pre trigger.

  A software solution that I already know how to do is the last resort to try to reduce the demand for processor and keep the hardware triggering.

  Thank you

  By using the "reference trigger" is the right solution.

  So can you please explain a little more in detail why it does not work in your case?

  Christian

• Apply the corrections lenses on the already imported photos

  Hello

  I just started using Lightroom CC and I imported my collection of Aperture in Lightroom using the automatic import of the Lightrooms function.

  After some time, I discovered the correction lens Lightroom function. Now I want to apply the setting of correction of lens on all images in a folder (or folders more) at a time instead of doing image by image in the develop module.

  The only 'multi apply the function' I can find some time is to import the photos. I can't find a way to apply the corrections of the goal on the photos already imported. Who has an idea on how to do it?

  Thanks in advance, Arthur

  In the develop module, select all the images in the film. Auto-Sync lights up and then apply the lens correction to one of the images. This correction will apply to all images that are highlighted.

• When I opened Google Eearth I get the data could not be read because it is not in the correct format

  How can I get Google Earth in the right format? While I can read the data?

  It should be in the correct format.

  SART to rearmament. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait for your iPad to begin on its own.

  Next try remove and reinstall the application.

  Ed. Your bio says IOS 9.2.1. If you have installed IOS 9.3 and the above does not work, you can contact Google.

• Hi - I'm looking for the correction Adobe Illustrator 2014 1.2 update (ou.0.2) for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only visible update is Illustrator CC 20141 - that is what introduced bugs.

  Hi - I'm looking for the correction Adobe Illustrator 2014 1.2 update (ou.0.2) for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only visible update is Illustrator CC 20141 - that is what introduced bugs.

  The only thing I can think that may cause the problems I have a Mac Mini on the Mavericks.

  Dave

  Hello

  I discovered that my question above is a non issue. A user has triggered by watching the below article on Illustrator 2014 17.0.2 cc

  http://helpx.Adobe.com/Illustrator/release-note/Illustrator-17-0-2-release-notes.html

  He had recently improved to wht, we know now is 18.0 to 18.1, which is the latest version. He has read the foregoing artic

  the and assumed that it was a version of fixed a bug for its version - as the number of ov18 v17 is not displayed. It is usually just 2014 CC.

  I asked him to post a bug report on Adobe Illustrator CC 20141

  Dave

• HOW to use the file/BLOB data temporary - email for multiple users... Please see code

  Dear gurus
  the code below works fine, he sends a good fixation to the first user, but to the 2nd user, it send blank (empty) file.
  What I want, I have read the data from the source and enter the temporary BLOB and use the same data to send several users in the loop.
  
  
  create or replace
  PROCEDURE dba_ho.emailattacheulhr is
  / * LOB related operation varriables * /.
  v_src_loc BFILE.
  l_buffer RAW (54);
  l_amount directory: = 54;
  l_pos INTEGER: = 1;
  l_blob BLOB: = EMPTY_BLOB;
  l_blob_len INTEGER.
  v_amount INTEGER.
  / * Related UTL_SMTP varriavles. */
  v_connection_handle UTL_SMTP. CONNECTION;
  v_from_email_address VARCHAR2 (200);
  v_to_email_address VARCHAR2 (200);
  v_cc VARCHAR2 (200);
  v_smtp_host VARCHAR2 (50);
  v_subject VARCHAR2 (500);
  l_message VARCHAR2 (30000);
  l_filename VARCHAR2 (4000);
  CustNo number (8);
  CNAME varchar2 (50);
  
  cst slider is
  Select a.EMAIL_ADDR, a.CARDHOLDER_NAME
  Cust a
  ORDER BY a.cust_no;
  
  / * This procedure of send_header is mentioned in the documentation * /.
  PROCEDURE send_header (pi_name IN VARCHAR2, pi_header IN VARCHAR2) AS
  BEGIN
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  pi_name | ': ' || pi_header | UTL_TCP. CRLF);
  END;
  
  BEGIN
  v_src_loc: = BFILENAME ('DIR_MMAIL', 'MAKPROM.pdf');
  v_from_email_address: = '[email protected] ';
  v_cc: = '[email protected] ';
  v_smtp_host: = 'mailhost.mak.com ';
  v_subject: = 'list of Promotion of Mak;
  -l_blob BLOB: = EMPTY_BLOB;
  / * Prepare the LOB of attachment file. */
  DBMS_LOB. OPEN (v_src_loc, DBMS_LOB. LOB_READONLY); -Read the file
  DBMS_LOB. CREATETEMPORARY (l_blob, TRUE); -Create a temporary LOB to store the file.
  v_amount: = DBMS_LOB. GETLENGTH (v_src_loc); -Amount to be stored.
  DBMS_LOB. LOADFROMFILE (l_blob, v_src_loc, v_amount); -A temporary file in LOB loading
  l_blob_len: = DBMS_LOB.getlength (l_blob);
  
  
  Begin
  CSE opened;
  
  loop
  extract the CSE in custno, v_to_email_address, cname;
  When the output cst % notfound;
  
  l_message: = 'Dear customer ' | UTL_TCP. CRLF;
  l_message: = l_message | CNAME | UTL_TCP. CRLF;
  l_message: = l_message | UTL_TCP. CRLF;
  l_message: = l_message | "Thanks for choosing. Enclosed please find our current list of promotion for your review. '||
  UTL_TCP. CRLF;
  l_message: = l_message | UTL_TCP. CRLF;
  l_message: = l_message | "Sincere friendships. UTL_TCP. CRLF;
  l_message: = l_message | UTL_TCP. CRLF;
  l_message: = l_message | UTL_TCP. CRLF;
  l_message: = l_message | "To Mak' | UTL_TCP. CRLF;
  l_message: = l_message | ' www.mak.com' | UTL_TCP. CRLF;
  
  / * Associated with coding UTL_SMTP. */
  v_connection_handle: = UTL_SMTP. OPEN_CONNECTION (v_smtp_host, 25);
  UTL_SMTP. HELO (v_connection_handle, v_smtp_host);
  UTL_SMTP. MAIL (v_connection_handle, v_from_email_address);
  UTL_SMTP. RCPT (v_connection_handle, v_to_email_address);
  UTL_SMTP. RCPT (v_connection_handle, v_cc);
  
  UTL_SMTP. OPEN_DATA (v_connection_handle);
  send_header ("", v_from_email_address) ;--|| ("<>'");
  send_header ("TO", v_to_email_address) ;--|| ("<>'");
  send_header ('CC', v_cc);
  send_header ('Subject', v_subject);
  
  -MIME header.
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  "MIME-Version: 1.0 ' |" UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  ' Content-Type: multipart/mixed; ' || UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  "boundary =" ' | "'" Sample.SECBOUND' | '"' ||
  UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle, UTL_TCP. CRLF);
  
  -Body of the message
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  '--' || "Sample.SECBOUND" | UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  ' Content-Type: text/plain; "|| UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  'charset = US-ASCII' | UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle, UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle, l_message |) UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle, UTL_TCP. CRLF);
  
  -Attachment of e-mail
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  '--' || "Sample.SECBOUND" | UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  ' Content-Type: application/octet-stream' |
  UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  ' Content-Disposition: attachment; ' || UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  "filename =" ' | "MakMail.pdf" | '"' || UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  ' Content-Transfer-Encoding: base64' | UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle, UTL_TCP. CRLF);
  / * Write the BLOB into pieces * /.
  While l_pos < l_blob_len LOOP
  DBMS_LOB. READ (l_blob, l_amount, l_pos, l_buffer);
  UTL_SMTP.write_raw_data (v_connection_handle,
  UTL_ENCODE. Base64_encode (l_buffer));
  UTL_SMTP. WRITE_DATA (v_connection_handle, UTL_TCP. CRLF);
  l_buffer: = NULL;
  l_pos: = l_pos + l_amount;
  END LOOP;
  UTL_SMTP. WRITE_DATA (v_connection_handle, UTL_TCP. CRLF);
  
  -E-mail nearby
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  '--' || "Sample.SECBOUND" | '--' || UTL_TCP. CRLF);
  UTL_SMTP. WRITE_DATA (v_connection_handle,
  UTL_TCP. CRLF. '.' || UTL_TCP. CRLF);
  UTL_SMTP. CLOSE_DATA (v_connection_handle);
  UTL_SMTP. Quit (v_connection_handle);
  -DBMS_LOB. FREETEMPORARY (l_blob);
  -DBMS_LOB. FileClose (v_src_loc);
  
  End loop;
  
  
  EXCEPTION
  WHILE OTHERS THEN
  UTL_SMTP. Quit (v_connection_handle);
  DBMS_LOB. FREETEMPORARY (l_blob);
  DBMS_LOB. FILECLOSE (V_SRC_LOC);
  dbms_output.put_line (SQLERRM); -try to print the error message.
  END;
  DBMS_LOB. FREETEMPORARY (l_blob);
  DBMS_LOB. FileClose (v_src_loc);
  End;
  
  -end of code
  
  Help, please.
  
  Concerning
  
  S.Garewal

  This is what happens when you copy a code without understanding.
  Take a look at the code here

  /* Writing the BLOB in chunks */
  WHILE l_pos < l_blob_len LOOP
  DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
  UTL_SMTP.write_raw_data(v_connection_handle,
  UTL_ENCODE.BASE64_ENCODE(l_buffer));
  UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
  l_buffer := NULL;
  l_pos := l_pos + l_amount;
  END LOOP;
  

  Discover the parameters of DBMS_LOB. READ.
  For the first time it's good reading but your position and the quantity is not initialized when you loop and read again and is not read correctly.

• Thunderbird displays always the message in the form 01 month (January); computer has the correct date.

  Messages in Thunderbird - if sent, received, be it - always present "01" for the month. The day and year are correct, however. The operating system contains the correct date. How can I synchronize Thunderbird on my computer?

  Fix you your computer. I have no idea how drive a mac, but;

  • Check the regional settings are correct. It is certainly not the case.
  • Once you have the correct locale check the time zone
  • Check that the date format is correct. I'm guessing that large systems short date format where the 01 for the month.

• My Thunderbird consistantly shows date of tomorrow on the incoming and outgoing emails. even if the system clock and clock Windows indicate the correct date. Help.

  My installation of Thunderbird seems to use a 24 hour clock before the actual time. For example the received messages on December 25, 2014 are dated December 26.

  In addition, when I answered a message entering today, December 25, automated header said that I was responding to a received message on 26 December.

  System clock of my computer and the Windows clock to show the correct date.

  Y at - it no way to force the Thunderbird to read again the system clock, or any other way to reset the time internal Thunderbird?

  Thunderbird uses your computer's clock. There nothing else for reference. I suggest you double check that your clock to the time and time zone. There is no reason to look at the bios to check the computer's clock.

• The "Date added" on every song (files) has been reset to an incorrect date. Can I get the correct dates?

  MBP Retna 10.11.02 ~ iTunes 12.3.2.35

  The "Date added" on all the songs (records) have been restored to the wrong date. Is it possible to recover the correct date?

  Turingtest2 CSA user help document: empty/corrupted iTunes after upgrade/crash library - https://discussions.apple.com/docs/DOC-6561

  If you do not see your content after updating to iTunes - https://support.apple.com/kb/HT203225

  If the above methods are too extreme for you, then no, there is not any way to edit "date added" unless you reset the clock of the computer to an earlier date and add the tracks for a new library.

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• Windows Media Center EPG does not have the correct data

  Windows Media Center EPG on my computer is so ugly!

  Description is separated in two, and it's always the last part that displays first, so you'll have to roll down to the bottom to read the description.

  The series is difficult to use, because the series 1) is not always marked as series (so you can select 'plain' Record), and 2) the title contains often series of numbering (e.g. "the bodyguards (1:6)"), so even if it is marked as a series, it will record ever "Guards body (2:6)" or other titles (the Media Center will just try to record any episode of "Bodyguards (1:6)").

  It is the broadcaster who create * data, and then displays in Media Center via Broadcasting Dataservices Ltd., or who are the last to blame?

  What is MS Media Center that does not have the correct data?

  I am in Denmark, if this has an impact on the response.

  Thank you and best regards!

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to post your query on our MSDN Forums, as this issue should be better there.

  Please refer to the reference to the link below to send your request:

  http://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information helps.

• What is the correct format for a single. File ALX for pre and Post 5.0?

  Hello

  We have an application which works fine on the pre 5.0 BlackBerry OS.  We have one ALX file that uses the _blackberryVersion designation to determine what COD files must be installed to which devices.  We do this because we build separate sets based on the device, for example, the version of the storm is more optimized for the storm devices.  It was all working well, but with the release of BlackBerry OS 5.0 OS versions seem to have changed.  Previously, the storm was 4.7.0.x and when the tour came out it was 4.7.1.x.  Now, however, so the Bold 9700 and Storm 2 are the two 5.0.0.x to the less based on the OS versions for the two simulators available right now.  It is therefore impossible to use the name of _blackberryVersion in the ALX file, at least for us, since we have different files COD for the storm, with touchscreen and other devices without touchscreen.

  So, I try to understand what the appropriate method for the use of a single file ALX is in this case.  From what I can tell the _blackberryVersion element uses only the three first sections of the version, for example 4.7.0 or 5.0.0 so even trying to make it more specific would not work and would also not practice for all minor versions that will be potentially different carriers.

  I did try to use the name of the series, for example , and even that would not work.  I also tried with 9500 | 9530 | 9550 and always had an error in the Application Loader saying there is no compatible software.  At first I thought it was due to some sections of with _blackberryVersion and then some with the series.  But I tried a new ALX file with just the designation of series and still no luck.

  Has anyone found how to do this properly yet?  Are there examples of ALX files which series =? Someone at - it examples of work from ALX files that use the _blackberryVersion and the series?

  Before everyone jumps on me, I'm not the real Director of enforcement, I only update the ALX file.  So I don't think it's possible to have a single file of COD to build, but at that time, that never would have happened so I need to find the best solution with different files of COD, that shouldn't be a problem because she supported and described in the documentation.

  If I need to display the ALX file please let me know.

  Kind regards

  David Dewaele, Jr.

  The correct series attribute for 9500 is "Thunder".

  You can find that where she attributes to all here-(for normal installations)

  C:\Program Files\Common Motion\AppLoader\Device.xml search

• Switch to the correct encryption certificate I get the error: "Key not valid for use is specified state."

  Used
  Now cannot open encrypted files.

  When you try to pass the correct encryption certificate I get the error:
  "Key not valid for use is specified state."

  See this http://answers.microsoft.com/en-us/windows/forum/windows_7-security/keeping-passwords-secure-microsoft-policy-on/39f56ef0-5d68-41ad-9daa-6e6019c25d37

  It is as it's supposed to as an anti theft precautions. I mean that data is encrypted, if somebody stole your hard drive and the hard drive boots and the other account it can receive data.

  If you not export recovery certificates and encrypting the data, you cannot redo the decryption.

  http://Windows.Microsoft.com/en-us/Windows/back-up-EFS-certificate#1TC=Windows-7

  If it's a default domain recovery agent. admin area. If it's home, to look for recovery certified you have exported.

  But third-party tools are there if you can remember old password the is to encrypt you can recover. But they are not free... and premium software is not be recommended or guided through support free forum due to the effort of preventing unnecessary advertising.

  You can do you own research about recovering data... just try to get you using the favorite search engine... "Restore access to encrypted EFS format files" or "Advanced EFS Data Recovery.

  Many more free guides will be available... Just keep in mind this is not a method to escape... you must remember your old password at least for decryption in the case where you export a certificate.

• Since the last update when you import images directly into Lightroom, metadata display the correct focal length, but display no information of the lens, Lightroom reports only as "unknown lens", the news of the lens are in meta-data... whe

  Since the last update when importing image directly in Lightroom, metadata display the correct focal length, but will not display any information from the lens, Lightroom reports only as 'unknown lens', the info from the lens is in the meta-data... When you change an image in LR in PS then save, lens Info appears as if by magic. This is a problem of workflow for those who could use multiple lenses on a shoot... What is the status on this issue? I shoot with Nikon D800... thnx ted-lens-metadata-field-missing-on-import?topic-reply-list[settings][filter_by]=company_promo https://feedback.photoshop.com/photoshop_family/topics/camera-raw-9-5-lens-information-aux I posted this on FB with LIGHTROOM page, they instructed me to send you.  Needless to say that it is a huge problem for the workflow, and reduce my bright room isn't an option because whenever he do it takes two days to arrive, and I have no time to lose if I appreciate some type of response as soon as possible

  What is the status on this issue?

  The link you gave clearly indicates the status of this issue. Adobe is working on it.

• Select multiple choice based on the data control does not not value in the correct form

  Hello, I am using JDeveloper 12.1.2

  I made a choice of several select based on an attribute of the year to a data control and I have a method in my managed bean that retrieves the selected values in the select choice of many, and on the basis that I want to do some queries, but the value that returns the selection is not the value of the attribute is the value of memory (or what is the correct value name..)

  Here is the code:

  < af:selectManyChoice value = "#{bindings." Label AnoList1.inputValue}' = 'Ano '.

  ID = "smc1.

  valueChangeListener = "#{OBIEE_managed_bean.» AnoListSelection}.

  autoSubmit = 'true '.

  Binding = "#{OBIEE_managed_bean.anoListBinding} '"

  immediate = "true" >

  < f: selectItems value = "#{bindings." AnoList1.items}"id ="si1"/ >

  < f: validator binding = "#{bindings." AnoList1.validator} "/ >"

  < / af:selectManyChoice >

  Managed bean:

  public void AnoListSelection (ValueChangeEvent valueChangeEvent) {}

  valueChangeEvent.getComponent () .processUpdates (FacesContext.getCurrentInstance ());

  try {}

  System.out.println ("Valor link yearChoice:" + anoListBinding.getValue () m:System.NET.SocketAddress.ToString ());

  ...

  The output is as follows:

  Valor link yearChoice: [Ljava.lang.Object;@4939cade

  Year: Ljava.lang.Object;@7135da60

  This normally happens when the toString is not defined, but how I have to fix this? Someone at - it had the same problem? Any advice?

  Kind regards

  Frederico.

  Hi Frederico

  I'm fine hope you are too.

  Sorry, but you can try

  {for (Object item: (Object []) {valueChangeEvent.getNewValue ())}

  System.out.println (Item.ToString ());

  }

  This should give you something.