Discovers the problem of transfer Server - Service does not properly and maintenance in the waiting mode

Similar Questions

• vCenter Server Service does not start after P2V

  Hello community.

  A problem that I have not been able to solve and looking for help.

  Problem:

  vCenter Server Service does not start after that Windows Server was P2V would be.  We get an ERROR 2 of the Service.  Get the error of the system Windows 7024 event log.

  History:

  The client, I currently work with that tries to smash to the high location of the DEV VCENTER.  Location of DEV vcenter works now all for this site (domains, dns and all development servers).  If its VCENTER PRODUCTION of this location.  Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box.  Let's break the SSO, SQL and VCENTER in their own servers.  However, the client wants to re - use the current physical server for SQL Server.  So I need P2V physical server existing until I can start the new environment.

  I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works.  Fails every time with the 2 ERROR Code.  I was unable to get a KB of VMWARE item that corresponds to the issue I'm having.  ERROR 2 code has many articles and none have worked.

  Details:

  vCenter 5.1 Build 799731

  SQL 2008 R2

  Windows 2008 R2

  When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)

  Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code

  When I saw the Windows system event log I get this error:

  EVENT ID: 7024

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)

  2013-12 - T 03, 16: 08:21.843 - 05:00 [info 09168 'dbdbPortgroup'] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [0]

  2013-12 - T 03, 16: 08:21.844 - 05:00 [info 09168 "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk

  2013-12 - T 03, 16: 08:21.844 - 05:00 [09168 "authvpxdMoSessionManager" info] certificates [OSP] [SessionManagerMo::Init] download m root...

  2013-12 - T 03, 16: 08:21.858 - 05:00 [01440 info "Default"] wire attached

  2013-12 - T 03, 16: 08:21.880 - 05:00 [09168 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: unexpected exception

  -> Backtrace:

  -> backtrace [00] rip 000000018018977 a

  -> backtrace [01] rip 0000000180100 c 98

  -> backtrace [02] rip 0000000180101fae

  -> backtrace [03] rip 000000018008aeab

  -> backtrace [04] rip 00000000005 b 4971

  -> backtrace [05] rip 0000000000551298

  -> backtrace [06] rip 00000000005516 c 9

  -> backtrace [07] rip 00000000004c0fae

  -> backtrace [08] rip 00000001405bbfb8

  -> backtrace [09] rip 000000013f4b0078

  -> backtrace [10] rip 000000013f4b016a

  -> backtrace [11] rip 000000013f4b0279

  -> backtrace [12] rip 000000013f4b0609

  -> backtrace [13] rip 000000013f7f2903

  -> backtrace [14] rip 000000013ff9e4b9

  -> backtrace [15] rip 000000013ff9835c

  -> backtrace [16] rip 00000001401b8a3b

  -> backtrace [17] rip 000007fefedca82d

  -> backtrace [18] rip 000000007783652d

  -> backtrace [19] rip 0000000077ccc521

  ->

  2013-12 - T 03, 16: 08:21.881 - 05:00 [warning 09168 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 4603

  2013-12 - T 03, 16: 08:21.881 - 05:00 [09168 error "Default"] could not initialize VMware VirtualCenter. Closing...

  2013-12 - T 03, 16: 08:21.882 - 05:00 [09168 "vpxdvpxdSupportManager" info] free/busy information wrote

  2013-12 - T 03, 16: 08:29.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 08:41.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 08:53.281 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:05.282 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 09:17.283 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:17.353 - 05:00 [info 09168 "Default"] forcing of VMware VirtualCenter stop now

  I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate.  Now the VCENTER is shouting at this topic it can't find one of its guests in the vdxp log, but that shouldn't matter.  All Services have been changed for local accounts.  All network and ODBC parameters are able to see the server... aka the server can see.  I didn't remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)... And the only thing that won't start is always VCENTER SERVER... SSO is started, SQL is launched...

  Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don't show any problems.  Only when its summer P2V would have done that themselves.

  I can't get this number.  Need help.

  Thoughts?

  Thank you

  BostonTechGuy

  In this case, we have finished rebuilding the vCenter and all migrate on.  Wish had better put up-to-date, but ultimately, it's what has been done.

  Thank you

  BostonTechGuy

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• CF8 will of Application Server Service does NOT start

  I came across this error:

  means: Java heap space

  and after researching it, it seemed to me that I should to the maximum segment size on the page Java/JVM, so I increased my heap size max to 1044 MB of 512, via the CF administrator, I also added the maxPermSize = 256 m.  Then I restarted the server, but the Application Server service will not start.

  I opened home/runtim/bin/jvm.config and define the segment of memory of 1024 size, restart, the service still does not start.

  Set the size of heap max 512 and removed maxPermSize, server rebooted, service still does not start.

  A value equal to the java.args set :-serveur-Xmx256m-Dsun.io = false .useCanonCaches - xx: MaxPermsize = 128 m - XX: + UseParallelGC-Dcoldfusion.rootDir={application.home}/... /-Dcoldfusion.libPath={application.home}/... / lib - Dcoldfusion.classPath={application.home}//lib/updates, {application. Home} /... / lib {cation.home} / app... /Gateway/lib /, {application. Home} /... / wwwroot/Web-INF/Flex/Jars, {application. home} /... / wwwroot/Web-INF/cfform/Jars

  Restarted, the service still will not start.

  Someone at - it ideas?

  The error that I get trying to start services is:

  Windows could not start the server to ColdFusion 8 applications on Local computer.  For more information, see the system even log.  If it is a non-Microsoft service, contact the service provider and therefore the 2 service-specific error code.

  Thank you!

  If you have a backup of the file config before you made the changes, restore this file.

  If this isn't the case, it seems that you have a few typos and extra spaces in your arguments.  For example "-xx" should be capitalized and '{application .home}' has a space after 'application' that shouldn't be there.  Note that the JVM arguments are case-sensitive.

  Here are the arguments for a working copy of the CF8, use at your own risk and your backup configuration file before making any changes.

  -Server-Xmx512m - Dsun.io.useCanonCaches = false - XX: MaxPermSize = 192 m - XX: + UseParallelGC-Dcoldfusion.rootDir={application.home}/... /-Dcoldfusion.libPath={application.home}/... / lib - Dcoldfusion.classPath={application.home}//lib/updates, {application. Home} /... / lib {cation.home} / app... /Gateway/lib /, {application. Home} /... / wwwroot/Web-INF/Flex/Jars, {application. home} /... / wwwroot/Web-INF/cfform/Jars

  Beware of the forum software sometimes adds extra space to the text that is displayed here.

• EPMA Server Service does not start after upgrading 11.1.2.2 to 11.1.2.3

  Hi all

  I successfully updated and configured the EMP products but when I start the server the EPMA Service its not not fixed the error giving "the Oracle Hyperion EPMA Server Service on Local computer started and then stopped. Some Services stop automatically if they are not in use by other services or programs"

  When I looked in the newspapers of EPMA (DimensionServer.log)

  [2014 06-11 T 05: 13:24.222 - 04:00] [EPMADIM] [NOTICE: 32] [EPMADIM-1] [EPMADIM. Hyperion.DimensionServer.Utility.ChannelUtility]

  [tid: starting the server EPMA] [ecid: disabled, 0] listen to via IPv4 [2014-06 - 11 T 05: 14:57.359 - 04:00] [EPMADIM] [INTERNAL_ERROR:32]

  [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: EPMA DimensionServer Startup] [ecid: disabled, 0]

  SVR_ERR_SESSION_MGR_DATABASE_UNAVAILABLE:Session Manager could not start because the connectivity of database could not be established.    to

  Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString)

  At Hyperion.DimensionServer.SessionManager.SessionManager.Initialize (Boolean restorePastInstanceSessions, Boolean EnableCaching)

  [2014 06-11 T 05: 14:57.406 - 04:00] [EPMADIM] [INTERNAL_ERROR:32] [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException]

  [tid: EPMA DimensionServer Startup] [ecid: disabled, 0] SVR_ERR_SESSION_MGR_DATABASE_UNAVAILABLE:Session Manager could not start

  because the connectivity of database could not be established.    At Hyperion.DimensionServer.SessionManager.SessionManager.Initialize

  (Boolean restorePastInstanceSessions, Boolean EnableCaching)

  At Hyperion.DimensionServer.Process.Program.InitializeSessionManager)

  At Hyperion.DimensionServer.Process.Program.StartDimensionServer)

  At Hyperion.DimensionServer.Process.Program.Main (String [] args) [2014-06 - 11 T 05: 14:57.734 - 04:00] [EPMADIM] [INTERNAL_ERROR:32]

  [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: starting the server EPMA] [ecid: disabled, 0]

  SVR_ERR_PROCESS_DID_NOT_START:process ' C:\Oracle\Middleware\EPMSystem11R1\products\Foundation\BPMA\AppServer\DimensionServer

  \ServerEngine\bin\EPMA_ServerEngine.exe' could not be started.

  I also looked in the event log.

  [EPMA DimensionServer Startup] ERROR SVR_ERR_SESSION_MGR_DATABASE_UNAVAILABLE:Session Manager could not be started because database

  connectivity could not be established.Hyperion.CommonServices.Exceptions.SessionManagerException: Session Manager could not start

  because the connectivity of database could not be established. -> Oracle.DataAccess.Client.OracleException: ORA-12545: Connect failed

  because target host or object does not exist

  At Hyperion.DimensionServer.SessionManager.SessionManager.InitializeSqlConnectionString)

  -End of the exception stack trace internal-

  At Hyperion.DimensionServer.SessionManager.SessionManager.Initialize (Boolean restorePastInstanceSessions, Boolean EnableCaching)

  At Hyperion.DimensionServer.Process.Program.InitializeSessionManager)

  At Hyperion.DimensionServer.Process.Program.StartDimensionServer)

  At Hyperion.DimensionServer.Process.Program.Main (String [] args)

  What I've observed, it's that when I upgraded from 11.1.2.2 to 11.1.2.3, it installs automatically two customers Oracle (32 and 64-bit) on

  the server. But Server customer already has Oracle installed on it.

  I looked in path Variables.

  PATH=C:\app\product\11.2.0\client_2\bin; C:\app\product\11.2.0\Client_1\bin;

  He also added check the TNS_ADMIN environment variable pointing to the Environment Variable

  TNS_ADMIN = C:\Oracle\Middleware\user_projects\config\dbclient

  and I changed it to

  TNS_ADMIN=C:\app\product\11.2.0\client_2\network\admin; C:\Oracle\Middleware\user_projects\config\dbclient

  and I am also able to ping and also connect to the database but I when to start the EPMA Server Service.

  I still get the same error.

  Well want to can someone help me

  Hi all

  I have this problem.

  Add the property "oraTNSDescription" to the EPMA_PRODUCT/DATABASE_CONN, starting from a prompt command/line, run:

  epmsys_registry addproperty #{componentID}/@oraTNSDescription "(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=host1-vip.uk.oracle.com)(PORT=1572))(ADDRESS=(PROTOCOL=TCP)(HOST=host2-vip.uk.oracle.com)(PORT=1572))(LOAD_BALANCE=OFF)(FAILOVER=on))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=MYSERV))"

  NOTE:

  -To find the 'componentID' run: «epmsys_registry EPMA_PRODUCT/DATABASE_CONN overview»

  -"epmsys_registry" utility is here: "$MIDDLEWARE_HOME/user_projects/epmsystem1/bin.

  You can also view this document.

  EPMA Dimension Server starts do not (Doc ID 1672159.1)

  The screenshots are on my blog.

  http://Hyperion-consulting.blogspot.com

• Cannot create a new user account, the user profile service service does not log and cannot install a program

  I can't create a new user account (Windows 7): the user profile service service has no logon.

  I have an administrative account which is the only account. I have problems with the installation of Autodesk Inventor so I need to create another user to see if I can solve the problem. But when I want to make a new user account and I get the following message: I can't create a new user account (Windows 7): the user profile service service has no logon.

  I haven't added new programs in a long time and I don't know when this question has been raised as I've had my laptop for 3 years and this is the first time I create another account than my original. I don't want to reset my computer manufactured settings.

  I also followed the http://support2.microsoft.com/kb/947215/en-us but I can't find any registry master in the list of profiles. In fact, I am the only user in there...

  It seems that my computer does not have a record in the system registry.

  In fact, the problem started when I tried to fix the "C:\windows\system32\config\systemprofile\desktop refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If he can't always find the information could have been moved to another location. "I was at least able to connect in the new user but will load a default profile and therefore do not load the profile properly. It seems I've done worse the problem after doing

  gpupdate/force

  at the prompt as an administrator.

  The very initial problem started all this was when I was running from Autodesk Inventor, it gives me the following error: Mismatched Ole32.dll and Comcat.dll. And the support2.microsoft.com/kb/201364/en-us is to say that since I am under Win7, the solution is not applied. So I'm stuck. And the next move was trying to see if a new user profile may solve the problem.

  Any suggestions will be greatly appreciated.

  And if possible, please also suggest a "repair" method so I can get Win7 function correctly without reinstalling the whole machine. "" I use a laptop so I do not have installation media.

  Thank you.

  Hello

  Thank you for your update on the issue.

  I suggest that you try to run the file system (CFS) Checker scan to check all the corruption of .dll files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, see this link:

  http://support.Microsoft.com/kb/929833/en-us

  Please post back your results for assistance.

• Not able to open a session in Windows 7 message service user profile service does not logon and the user profile cannot be loaded

  the user profile service service has no logon and the user profile cannot be loaded. IAM not able to switch on the laptop. How to solve this problem?
  My laptop is Sony's new Vaio. Windows7. 4 GB of ram and 2.1 billion hertz processor with dual-core

  Hi ravichandrans36,

  Thank you for using Microsoft Windows forum.

  This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.

  To resolve this issue, follow these steps:

  1 delete the profile by using the computer properties dialog box. To do this, follow these steps:

  a. Click Start, right-click computer and then click Properties.
  b. click on change settings.
  c. in the System Properties dialog box, click the Advanced tab.
  d. under user profiles, click settings.
  e. in the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
   
  2. Click Start, type regedit in the start search box and then press ENTER.

  3. Locate, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  4 right-click the SID that you want to delete and then click on remove.

  5 log on to the computer and create a new profile.

  For more information, see: http://support.microsoft.com/kb/947215

  EDITING REGISTRY WARNING:
  Important:   This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Kind regards
  Aziz Nadeem - Microsoft Support

• vCenter Server service does not start after you run Windows updates

  On a regular basis, my vCenter Server service fails to start after the automatic updates of windows are applied.  The vCenter server is a datacenter 2008R2 VM.

  The only other running applications are PerfectDisk and agents of ESET NOD32 - vCenter is in 4.1.  I tried to adjust the vCenter Server and WedAdmin service of delayed start, but that doesn't seem to make a big difference. The following errors are displayed in the case of the newspaper which lead me to think the issue is related to SQL:

  SQL Server is not ready to accept new client connections. Wait a few minutes and try again. If you have access in the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again.  CUSTOMER:: 1

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  Anyone encountered this before?

  Hello.

  I didn't know this, but the info in Ko 1007669 may be useful.

  Good luck!

• Problems with mapped drives folder does not properly?

  • Hello, I have my readers mapped times PC on my network for single, however when I try to access it from the group main wokk PC that I use the most, it does nothing, except if I click on it above the folder box, I stored shortcuts in and re-fresh from hitting a few or several times, then he at that time goes crazy and does nothing and says does not on the storage folder, I used store it in, what am I doing wrong? It works sometimes, but I can't count on them to work when I need them too to help ideas everyone, thanks in advance., Teltom1

  Hi Teltom1,

  You try to access the shared computer using the UNC (Universal Naming Convention) path. The syntax is as follows.

  \\computername\sharename

  See also:

  How to troubleshoot a network home in Windows XP

• I can't get the update of windows to run. I get an error message that says that the update service does not work and I have to restart my computer.

  I am running Vista on a 64-bit computer.  I don't know with certainty how current I am, because as a problem earlier, but different, brought me back to earlier restore versions.  I checked the Services and confirmed that the Windows Update service is started.  I restarted my computer and the problem persists.

  Is there a file that might have something in it that shouldn't be there or I'm probably deal with a corrupt program?

  Hello

  You can reset the Windows components and see if it works fine.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

• vCenter server service does not start

  

  Prakash,

  Some of the steps I followed:

  vCenter 4

  (1) check check DB connectivity - according to your type of database via ODBC

  (2) check the vpxd.log file and capture the symptoms of failure (focused on mistakes just before the closing msg vCenter service)

  (3) search DB size values and details of free space

  (4) is it any change password next to DB? If so update via command-line vpxd.exe

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1006482

  (5) if the troubleshooting DB is clear - so focus on components vCenter as corruption of the inventory service

  (6) Finally the permissions on the folder of installation of vCenter

  vCenter 5

  (1) check check DB connectivity - according to your type of database via ODBC

  (2) check the vpxd.log file and capture the symptoms of failure (focused on mistakes just before the closing msg vCenter service)

  (3) search DB size values and details of free space

  (4) is it any change password next to DB? If so update via command-line vpxd.exe

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1006482

  (5) if the troubleshooting DB is clear - so concentrate on vCenter components such as SSO

  (6) make sure SSO listening on the correct port number SQL (checking the value in DB SQL via sql management studio console) - ask your team to SQL

  (7) once all SSO components are clear then check for the inventory service

  (8) Finally the permissions on the folder of installation of vCenter

  NOTE: I tried to collect most of the steps based on my experience and you can open cases with VMware for better troubleshooting steps

  T. clarriiza

  Cloud VCP, VCP - VTC, MCITP & CCA

• Wireless zero configuration service does not properly

  OK, here's what I did:

  1A started with a fresh install of windows xp pro sp3

  2 installed EDIMAX usb wireless adapter

  3 downloaded all the critical updates available for the operating system

  4 installed several other pieces of hardware, microsoft office, Photoshop, Avast antivirus, etc..

  At different points along the way, the restore points were made.

  Everything was hunky dory until the very last point to install a HP printer....

  On his return from a restart of the system, cannot connect wireless adapter.

  The window that lists the wireless connections available indicates that windows cannot configure the connections because some other wireless software apparently resumed its function.

  He said that if I wanted to have windows set it up for me, I could restart it from services.msc.  When I arrived, I found the wireless configuration service was set to automatic, however she didn't start.

  I then resumed, after started what it remained only for the rest of the session.  When the computer has been restarted, he returned to the same State as before.

  I then tried all available system restore points, which could NOT be restored.

  I tried to uninstall the faulty printer drivers and software, which also did not fix the problem.

  In desperation, tried a Microsoft Fixit applet which is supposed to be a disable half dozen services known to cause this problem, but as far as I could tell, they have never been installed on this machine.

  Does anyone have any other suggestions as to how I can resstore this system to work properly?

  Number 1 (WPS2.0 HW PBC Service) is a service of Edimax associated your Edimax wifi card

  Number 2 (Wired AutoConfig) is the built-in Windows service that is used with your wired (Ethernet) network card.  She appeared in XP service pack 3.

  Number 3 (Wireless Zero Configuration)
  is the integrated service of Windows that configures your wireless adapter.  You can have only one service running to configure your wireless network card: is WZC or Edimax service.

  "WPS" stands for "WiFi Protected Setup" and "PBC" is the term of Edimax for "Press the Configuration button."  These two relate to a method of security configuration of wireless networks that has been designed to allow 'users at home who know little of wireless security and may be intimidated by the available security options' to set the security on their wireless networks.  Unfortunately, WPS has found to have security holes (click the link to the Wikipedia article for more details).

  In any case you don't need number 1, especially once your network has been configured with appropriate encryption.  As to why install a HP printer might have caused the problem, I can only speculate: is your printer a wireless printer?  If so, he may very well have included the version of HP of WPS... who have somehow damaged the Edimax installation.

• Host does not switch into maintenance - Operation Timed Out mode

  Hey all.

  I'm putting one of my hosts in the mode of maintenance and get an 'Operation Timed' error Out. All virtual machines have been moved outside the host so I know that's not a problem "CD in the drive.

  I tried to do this in VC and the command line using vimsh - n EI/hostsvc/maintenance_mode_enter

  When I run the command line, here is the result:

  # vimsh-e - n/hostsvc/maintenance_mode_enter

  File not found.

  -2008-12-13 16:16:35.872 'App' 3076444288 info] current working directory: / usr/lib/vmware/hostd

  -2008-12-13 16:16:35.874 'BaseLibs' 3076444288 info] HOSTINFO: see Intel CPU, numCoresPerCPU 4, numThreadsPerCore 1.

  -2008-12-13 16:16:35.875 'BaseLibs' 3076444288 info] HOSTINFO: hyperthreading disabled, setting the number of threads by heart at 1.

  -2008-12-13 16:16:35.876 'BaseLibs' 3076444288 info] HOSTINFO: this machine has 2 physical processors and 8 cores total 8 logical processors.

  -2008-12-13 16:16:35.877 'BaseLibs' 3076444288 info] use system libcrypto, version 90709F

  -2008-12-13 16:16:35.878 info 'App' 3076444288] Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  [- 2008-12-13 16:16:35.905 'BaseLibs' 13552560 attention] - Vmdb_Unset] unknown path: /vmomi/

  ' vim. task: haTask-ha-host - vim.HostSystem.enterMaintenanceMode - 198307'

  Something tells me that the "file not found" is not a good thing. If you can think of to try please let me know.

  TIA

  Post edited by: kac2

  I changed the first [to one - for purposes of formatting

  Unfortunately, this happens from time to time.  The work around is simply restart the host as it is, and then maintenance.

• message "the windows service is not running" and it will not check for updates

  Original title : I'm trying to run the update and it says my windows service does not work and it checks the updates... How can I solve this?

  I am trying to run windows update and it said: my windows service does not work and it checks the updates... How can I fix it?

  Hello.

  Did you change your computer?

  Method 1:

  I suggest you to follow the steps and check.

  Click Start, in the search box, type in Services,

  Check the status of the following service and ensure that they are running

  Background Intelligent Transfer Service

  Cryptographic services

  Windows Update

  Under each service, click Start

  General, and then click Start under the service status:

  Method 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  See also:

  I would also say that reset you windows update and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• laptop screen does not light and the system does not start most of the time.

  my hp g62 lptop started not starting and the monitor not turns sometimess even if it lights. with the time he had this problem more frequently. now it does not start and the monitor turns at all.  It will fuel yet but it's going to be okay. Ive tried a recovery disk, but it does not start the machine or be the monitor lights. im a beginner so any help will be appreciated.

  Hello

  This may be a trial outcome disply to connect an external monitor to your laptop and see if you get display it.

  You can connect to an external monitor via VGA or HDMI connection.  The usual process to transfer the video output to an external source is to press and hold the fn key and press f4.  Use the arrow keys to select "Projector" only and press ENTER.

  http://support.HP.com/us-en/document/c02013758

  and I also found some links that may help you

  http://support.HP.com/us-en/document/c01884928

  http://support.HP.com/us-en/document/c01443371