Discs of recovery, or vanilla Windows Installer on Q770 and 2nd HARD drive

Similar Questions

• Installation of XPS 8700 2nd hard drive. Not recognized by Windows 8, but the BIOS sees

  Hello

  I installed a Segate Barcuda 3 to hard drive as my 2nd HDD in XPS 8700. I connected the Sata 2 port (sata 3).

  In the BIOS, I can see that, under SATA 3, there is a 3 TB drive. But, when it comes to Windows 8, OS does not recognize it. In this regard, any help is appreciated.

  Thank you

  Rambeau

  rparige

  For Windows to recognize the second hard drive, it must be partitioned, formatted, and received a letter from reader, using Windows Disk Manager.

  Bev.

• computer Windows does not recognize my 2nd hard drive but the computer management and the two bios say he's here?

  Secondary drive of HP laptop.  Vista ultimate 64 bit OS.   I installed a hard drive, formatted with computer management, check the bios, as saying that this is? I haver to do?

  Steve, run Bios secondary ck drive it passeds all tests.

  Computer management is fwhat I used for the format and the name of the drive.  It recognizes the drive!

  When I click on computer is not there? Why

  No errors, Ran H P health check it says his State there but intelligent smart stranger.  BIOS says smart successful test.

  Returns the 320 GB sata drive and bought a 250 GB sata drive it works. Don't know why computer windows didn't see it or report it defective.

  Another problem I had.  I have replace the c drive he had run a windows launched out of the backup of the computer, to another drive. tried to restore it. It did not restore my nero or any other software and updates.  Is there a way completely a backup disk and restore all on a new drive.  I'm not stealing everything that I bought everything.  Norton Ghost will do it?  E-mail address is removed from the privacy * pls send an e-mail.

• I have 2 failure windows 7 installs with 35 GB of hard drive space, but I find no windows.old file?

  I have 2 failure windows 7 installs with 35 GB of hard drive space. but I find no windows.old file?

  The first installation failed because I had a copy of counterfeit Windows 7.

  I bought another copy and installed. Then, I got a horrible virus/worm that disabled all .exe files and the fix was just beyond me!

  I installed again but did not know that the previous facility where still there.

  I tried to clean the disc, but I don't me "from previous versions of windows" to clean.

  I find no windows.old file. (Enabled hidden files)

  Only I have a disc ssd 60gig and want the missing 35gig kindly returned to use.

  Can someone help?

  Check the system restore to see how much disk space it uses:

  Click Start

  Right click on computer

  Click on properties

  Click on advanced system settings

  Click on the System Protection

  Click on configure

  Adjust the amount of disk space allocated to system restore.

  In addition, the amount of RAM you have installed, it will take more disk space for paging, hibernation, and dump files.

• I lost my disc for item 13 for windows, but I have still my MAC drive is it possible to get a load down without having to buy it all over again?

  I lost my disc for item 13 for windows, but I have still my MAC drive is it possible to get a load down without having to buy it all over again?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• I have a serial number valid for windows Vista Home Basic, but my hard drive crashed and I have no way to re - install vista on my computer. I am looking for a download so I can do it.

  Basically, I installed windows 2000 on my machine and I can't find a download for windows vista home basic that doesn't have some kind of crack or keygen. I want a legal copy not a hack. I have the serial number supplied with my computer. where can I find this download or get a drive.

  Here are all LEGAL for Vista:

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Local tech installed Windows Vista Home Premium after a hard drive failure. However, my key is Windows Basic. Is the copy, he put on my system illegal?

  Genuine Windows clean install

  Hello

  I had a problem with my laptop Acer Extensa 5230th. It was not started and so I took for Matech computers.  They diagnosed as having a mechanical drive problem.  So they replaced the drive and installed a more recent version of windows vista on.  Note: I haven't bought a new copy of vista family premium, he said he was going to reinstall vista.  It had windows Vista Home Basic, it has installed vista Home premium and said that he had validated by call from windows, but I'm suspicious because I don't think you can use a base of windows key to validate Home premium!  It means that he has put on an illegal version on windows or used the genuine key that came with the laptop.

  In addition, on computers of brands, if this happens again, how is a technician for legally to reinstall the original windows that it came with the new hard drive? How to install windows vista basic on the new hard drive by using the original key to make it genuine? What windows installation disc would you require? or is it easier to just buy a new copy of windows?  I heard that many technicians, prefer to install illegal versions of cracking of windows instead of the customer to buy the new installation of windows.

  Kind regards

  Lewis

  Here are some utilities which displays product key Vista Matech used to activate Windows:

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  However may not detect a key to office, then try one of the other two below)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html

  Please do not post your key on this forum, rather checking to see if it matches the key on your laptop, I(Correction: "if it isn't') it will fall sooner or later"Non-genuine"that your key was for another version of Vista so what was installed.

  J W Stuart: http://www.pagestart.com

• Can I install windows 7 on the superdive replacement hard drive

  Hello people,

  Recently I replaced the drive of my macbook pro 13 inch mid-2012 with an adapter (caddy tray) to put in a second hard drive (500 GB todhiba).

  Now I am trying to install windows 7 with bootcamp (on an os x 10.9.5, bootcamp 5.1.2), but when I boot from the usb device, when windows ask me which drive I want to install it, it says: windows cannot be installed to this disk, drive must be formatted ntfs + your computer hardware seem unable to run windows 7 check your system components and try again.

  I've tried several things: the direct USB win7 reformat, delete the partition, create partition... still no luck.

  Of in osx: reformat the disk with unallocated space (MBR) and try again to install direct USB... had the same error messages.

  I even tried to install Ubuntu gnome rather with a live usb works but all I get when holding the option button while booting is my Macintosh HD, the drive appears.

  Can someone give me about workaround or even show me the way? I am out of ideas now.

  Thank you very much

  Simon.

  Please see Installer Windows 7 Pro on the second HARD drive which is in Optibay for some answers.

• Qosmio F30 - 112 - Windows XP does not recognize the HARD drive

  Hello.

  I have a Qosmio F30-112.
  I tried to install the Windows XP Professional instead of the Media Center edition.
  However, during the execution of the installer, my laptop does not recognize the hard drive. Therefore, the installation cannot continue.

  I thought it might be a problem of corruption with my laptop and reinstalled Media Center Edition successfully.
  But when I try to install XP Professional it always gives me the same error.

  Suggestions for the configuration of the BIOS or solutions for why this is happening?

  Thanks in advance.

  Hello

  Just a question:
  You are looking for in this forum for other similar issues with regard to the installation of Win XP and lack HARD drive? I doubt

  The fact is that your notebook has a SATA controller and you need a SATA (Intel Matrix Storage Manager) driver.

  You should have a look here in this doc from Toshiba:
  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

  and should also search this forum for other threads

  Good bye

• Windows CD can not find installed hard drives

  I have a PC that has windows XP installed and worked well and I have DSL so I kept it updated. It has been updated for the updates. It was a month that it seemed hung on a windows update and I've finally powered down to exit the update mode. After that, he would finally in XP but would not other that the busy when an icon is clicked. I decided to reload XP using the same CD I used originally when I built PC. It will load the drivers to install XP, but when installing windows is selected it says no hard drives found. When booting 2 HARD disks are displayed, but are not detected when you look in the BIOS. I've tried changes in the BIOS as auto detect HDD including default BIOS and not go. I remembered to change a partition using Partition magic 8.0 and decided that might be the problem, so I started in the magic of partition and formatted part C of the HDD in NTFS, but the results are the same. Any suggestion is appreciated. TIA

  Do you mean you see a message like this?

  Setup did not find any hard drives installed in your computer. Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running. Setup cannot continue. To quit Setup, press F3.

  If the disks are not appearing in BIOS, it seems unlikely that XP will be able to see them no more.

  Describe the best you can, your hard disk configuration...  IDE, SATA, SCSI, RAID configurations...

  You build the hardware yourself or is it a system store bought?

  Are you able to determine when the system turns on, the brand and model of your motherboard and the BIOS it is running?

  Without more information, I can only offers these general reflections where to search:

  When you see a message like this, obviously the XP installation starts to load, but then when the installation program needs to go out and find your hard drive is not find the hard drive.  It means not necessarily your hard drive is defective and if it worked before, it's probably still plugged.  It simply means that the installation of XP is not able to find it.

  Looks like you need enter the BIOS on your system by pressing the 'Delete', F2, F10 or F12 key (what the key is good for your system), find the section where the types of hard disks and hard disk interfaces are configured and temporarily change the setting so the XP installation is able to find the hard drive.

  Where to find the accommodation and how to change depends on your system manufacturer and the version of the BIOS, so you end up having to look at her.  If you know your system brand and model, we can probably help you find a job.

  You must locate and change the interface mode to your hard drive in the BIOS so that when installing XP loading, it will be able to locate the hard drive.

  Before making adjustments, you should take note of what are the current BIOS settings, so you can change when you are finished.

  The adjustment varies so here are some examples that I have accumulated:

  The adjustment is done in the BIOS and could be in Integrated Peripherals, Configuration of SATA, SATA Mode device.  After you make the changes, save them and restart your XP installation program.

  If you find that the mode is set on the RAID/SATA mode, change the IDE mode.

  If you find that the mode is set to AHCI, change the ATA mode.

  If you find that the mode is set to AHCI emulation Mode, change the IDE emulation mode.

  If you find that the mode is set to SATA, SATA mode off or change the ATA mode.

  If you find that the mode is set to SATA Native Mode, disable the native SATA Mode.

  If you find that the mode is set on AHCI/RAID Autodetect, change the combination mode.

  If find you the setting that works for you, I would like to know what it is so I can add it to my notes.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full.

  I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full. I don't understand how he got that way... but... I've never used windows to the top, however I do back up with my Norton Security.  I'm not a COMPUTER guru AT ALL and am very confused as to what must be saved for me to do a system restore.  I just made a backup on a 16 GB usb flash drive, which included photos, documents, email, contacts and music.  But what of my registry or my drivers I've updated on the latest updates of 2 years and windows?

  So in plain English for the layperson to the computer, lol, can someone tell me...

  1. where should I back up to? (windows, norton?)

  2. what should I back up? EXACTLY, please. lol (I have hundreds of games, I don't want to back to the top if possible)

  3 and... HOW MUCH ALCOHOL SHOULD I HAVE AVAILABLE WHILE TRYING THIS. LOL just kidding. Laughing out loud

  Hello

  Updates must be installed in a certain order and no Service Pack must be installed unless and until it is offered through Windows Update.

  However, try these options:

  Step 1: You can not reuse what already automatically downloaded and installed. You can however save updates and install them manually if you wish.

  Step 2: You can create a system image on the computer. A system image is an exact copy of a disc. By default, a system image includes the drives required for Windows to run. In addition, it includes Windows and your system settings, programs and files. You can use a system image to restore the contents of your computer if your hard drive or computer ever stops working.

  See:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Also, you can see the following link for more information about Windows backup:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

• Re-install windows 7 home prem on a hard drive replaced

  I have a HP probook 4520 laptop computer s which is come with a pre-installed win 7 home prem copy OA 32 bit, when I bought my laptop I was told that I need to reinstall the windows it is possible to simply reinstall without cd or dvd as the copy of windows is saved on the laptop, in any case now my laptop is out of warranty (it just just expired a month ago) and my hard drive crashed, there was no way to get what was in it, so I had to buy a new hard drive, now my problem is, how do I install a new original and an activated copy of windows 7 on my computer, knowing that the only thing that I have now is the sticker on the back of my laptop which has number of authenticity Windows that has been installed on the hard drive dead (the former)? is anyway to do this? Help, please

  is it OK to install the copy of 64-bit and not 32 Bit? the product key will work?

  I want to install the 64-bit because I need RAM reading entirely, as the 32-bit edition do not recognize fully...

  The key of Windows 7 works with 32 and 64 bit, but can only be installed at a time.

  First, make sure that the 64-bit drivers are available for your computer - check with the manufacturer.

  If you are moving to 64 bit make sure that your computer can run 64-bit - you can use the Upgrade Advisor to check:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Installation and reinstallation of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Case of failure of the online activation:

  Call Microsoft use the manual phone Activation

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  1. open Windows Activation - click on the Start button, right-click computer, click Properties, then click the option to activate Windows now or change your key.

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated phone system.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. dial one of the available phone numbers listed.

  7. do not select all options and wait for a person pick up, then explain what happened.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Windows 8 showing does not second hard drive

  I installed Windows 8 last night. I cling to the loading screen I did install another. This installation worked, but now my 2nd hard drive is not appear. They are not the SATA drives. One does not only has information about saving. Is there a reason that my 2nd hard drive is not displayed?

  I don't know what I did, but now it appears.

• My MBP is showing a "Remote Disc" in the list of devices. It's not a hard drive.

  My MBP is showing a "Remote Disc" in the list of devices. It's not a hard drive. So where did it come from? I 'get info' on this subject, but it doesn't tell me a thing.  He sees the disk drives elsewhere in my house? It's to see my iPhone as a remote disc? The photo with him is a DVD or CD gold. It drives me crazy.  I am running OSX Sierra.

  This has been on the Mac for a while now... Here is a link that can better describe it.

  Use the CD or DVD drive from another computer with your Mac - Apple Support