Discussion and questions of piracy

Similar Questions

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• I went looking for an old discussion and all of my discussions have disappeared. Can someone tell me what is happening?

  I went looking for an old discussion and all of my discussions have disappeared. Can someone tell me what is happening?

  Click on your name here: Greenfox

  I still see a lot of old debates on your part - AJ

• I can't send messages, whatsapp for group discussions and I think that is the update of ios software that is not compatible with my iphone 5 s

  I can't send messages, whatsapp for group discussions and I feel really lost. my friends can't receive my message and I am only able to send individual text messages. I think that its because of the version update of ios which is not compatible with my iphone 5 s. is a solution to this problem?

  I have the same problem, started this morning.

  I'm in iOS 9.1, using the iPhone 6. Don't know what happened, but I have also opened a disturbance with Whatsapp support as well.

  A focus group work, group chat messages cannot be delivered. Individual messages are working properly. I tried to remove and reinstall the application, remove the discussion group and recreate, all has not helped.

  A lack of ideas.

• Where can I get back my previous discussions and the answers?

  Where can I get back my previous discussions and the answers?

  Hello

  Click on your username above, it brings to your forum profile, then click on the tabs of the activity, you can see your previous discussions there.

  Let me know if this helps.

• How can I get discussions and announcements

  I do not see the Services tab in the Administration of the Webcenter spaces, how to get Discussions and announcements?
  WC_Collaboration is started successfully and in run Mode.

  1) go to the Manager of the http://localhost:7001 company / GE
  (2) select WebCenter-> WebCenter spaces-> webcenter of the tree on the left
  (3) in addition to the central pane click WebCenter-> settings-> Service configuration
  (4) select Discussions and announcements
  5) press Add
  (6) specify the settings that match your parameters. Also, make sure that you set the box of the Connection Active .
  7) press the Ok button to save the connection
  (8) restart the server

  That's all.
  Here are some additional documents on the creation of the connection: http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e12405/wcadm_ann_disc.htm#BJFJAGEE

• Discussion of questions and answers keep coming

  How to stop email to Inbox me?

  Disable the option in your profile of ASC.

• How to find discussions and old ideas?

  Yet the issues and ideas of the former Central client available? If so, how can I find those I got comment or followed?

  Hi Amy,

  Old Discussions/questions/ideas are still available for 'Read' access through support.eloqua.com.  Questions/discussions nominal upper created from the old CC have been assessed for accuracy and migrated to the new support portal as knowledge base articles.  The higher nominal idea was created as of the ideas in the transfer area of the idea of the new support portal.

  If you are looking for something specific on support.eloqua.com that you would like me to migrate in the knowledge base, feel free to send me a private message and get the URL.  I'll see if it's already there, and if not, I'll get it there for you.

  For ideas, you can re-create an idea in Exchange for our new idea if it is not already there.  Or, if you want - I can recreate for you if you shot me once again, the URL to the idea.

  Please feel free to friend me (use the link below) and PM me the questions/comments/concerns or the URL that you may have.

  I hope that helps!

  Mary Ann McKinnon

• I think I erased my OS and question mark flashing now appears

  Here is what happened. Haha I actually went to utilities OS X using the command (⌘) r. Then I clicked on the OS utilities and I removed my boot drive.        I restarted the flashing question mark appeared on my start, I tried to restart again and command prompt - R key and it directly me linked to Internet OS X recovery where appears the rotating Globe. What should I do next? I want to go back to work. Help, please. Thank you.

  Hello. Have a look here If flashing question mark appears when you start your Mac - Apple Support

• Answers and questions of security

  Hi all. I can't change my password because I forgot the security answer. There is no Reset button.

  How can you change security Q and r when the iPad Pro has no Reset button?

  Follow these instructions

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• E-mail address and question iCloud

  I use Mail 9.2 in OS X El Capitan.  The problem is an e-mail sender/recipient unwanted but persistent recurring which always forces me to change the e-mail address of the recipient manually.  Here's how it goes:

  I receive emails from x which is sent from the account x now uses exclusively.  Previously, x maintained two accounts of different e-mail and addresses - I deleted the defunct address x info by his Contacts on the PC as well as Contacts also stored in iCloud.  ICloud information contains is no longer the address defunct e-mail, but Contacts on the PC he maintains he is now grayed out, listed under the heading of 'other', and I can't edit/delete it.  Whenever x sent me an email from the email account it uses now the old defunct email address will appear as the sender and if I don't manually change to the correct recipient address - this is if I use 'reply to sender' - the email is only sent on behalf of the deceased.  "Deceased" means the x e-mail account is now no longer in use.

  How this issue can be resolved?  (1) I would completely remove the old e-mail address. (2) when I receive an email from x, I love to show the correct address of the sender; and (3) when I send an email to x, I like that it appears as the recipient's address whoever x uses now.

  Another question: after I went to iCloud to modify the coordinates of x, all my contacts on PC's Contacts have doubled and slept that way, even after disengagement from iCloud, forcing me to manually delete all the duplicates.  Why is this happening and how can it be avoided?

  Hi dubwisedude,

  Thank you for using communities Support from Apple! I'm sorry to hear that you're having these problems with the Contacts; I know how that can be frustrating. If that specific contact information is relatively simple, you can ensure that you have a copy of it (copy paper, if necessary), then try to delete the contact from iCloud, which should also remove the synchronized local copy (otherwise, you may need to remove it manually). Once deleted, you would then recreate the contact and see if the same behavior persists on received emails recently. You can find the following article useful:

  iCloud: remove a contact

  If you continue to have other problems with iCloud Contacts, you can also find this article helpful:

  Get help using iCloud Contacts, calendars, or reminders - Apple Support

  If you see duplicate contacts after establishing iCloud Support Apple - Contacts

  Concerning

• Satellite SM30-604: 4.25 SpeedFan and question about the right temperature?

  SpeedFan 4.25 is on my Toshiba Satellite SM30 604.
  Until recently, the CPU usage shown was variable.
  Compared to a low percentage (green dots) to somewhere around maximum, according to what I was doing (I have never game, but use purely professional things like Word, Excel, PowerPoint and many websites).

  Temperatures in most of the green time, the high 40-links, the low 50-links (I then scroll to the top of the Speed01 of the fan from 0 to 50% and 50%, it starts to run). I sometimes add an external fan, I work sometimes in very hot climates).
  I have the readings of the time 4.
  Local temperature: 49 c (with this temp color varies between a Green V and a red arrow pointing upwards).
  Temp distance: 85 (with a flame)
  HC0: 26 c (with a green (V)
  Temp1: 86 (with a red flame).

  WHAT ARE THE TEMPERATURES IMPORTANT? WHAT IS LOCAL TIME? TEMP DISTANCE AND TEMP1?

  These very high temperatures, I've had for a day. The fan is working (I hear it, I can feel. "I can see, because I partly dismantled the laptop.) But the Speed01 is 0%, and there is no reaction on the adjustment upward. Or playback is 100% without reaction to setting down. And rotating or disable "auto fan speed has no effect.
  And without any other program running, the CPU usage increased a few seconds after switching on to 100%. I do not notice a significant slow down in the speed of my applications when I start using them. And a virus today scan did not reveal all the important things.
  I can't activate my taskbar more.

  Who has some answers for me. Green in this area?

  Thank you

  Hello Han

  Your ad is very nice and very interesting, but you'll be very happy if someone can explain all this because you are using a non-Toshiba software. It is always recommended to use the original software because software Toshiba designed has been tested and it can just to protect the hardware components.

  Use of software from third party is always at your own risk, and if you have any problems or questions, please contact their own support. They have much more experience with your applications.

  I can just tell you that you should be careful where your laptop is placed and make sure that the device can take a deep breath and cool down properly.

  Good luck!

• Suggestions and Questions about the upgrade my Hardrive Mac and Ram.

  Hi This is my first time asking something in the forums. (At least I think) Well anyway, I got the Macbook Pro Mid 2012 13 "with the retina also runs the OS El captain. I do computer for school and sometimes animation video editing and ive noticed some performance as my projects get bigger and bigger issues. I want to improve my mac, but I'm not very tech savy and don't want to do something useless, so I had a few questions, I wanted to ask you.

  Do I need for my hard drive and my Ram?

  What effect will the upgrade of my Ram and what effect will be upgrading my hard drive with an SSD?

  I saw this SSD online and thought of novice opion that sounds get Id more bang for my buck (link) with her. Is this good? What more to kill? WiIll it still works? Could you suggest some other good affordable options?

  My next question if I decide to upgrade my Ram can provide you with some good affordable links to buy of new RAM sticks, is also 8 GB, the best he can do?

  My next question I watched a few videos online and by installing the updates level looks really easy and fast. But I use bootcamp (to play games sometimes), and I wanted to know if I save my files on my drive as ive seen people do videos, (something to wipe the drive and put it back in after installing updates) will be I lose my windows 7, I lost the disc to reinstall and he check so I really want to buy a new also do not want to lose the things I put in memory.

  From the retina MacBooks you is impossible to pass the ram as it is soldered to the logic board. As with the hard drive, it's just a card ssd and you can't get those anywhere because their hard to find.

• Problem and question version of LabVIEW

  Hello world

  I want to install Labview 2012, I have Labview 2011 now and all of my programs, built in 2011, don't you think it is a problem when I install Labview 2012? all my programs are ex file. (I have licnese labview).

  I have another question regarding Ex file, I'm using PXie4330, 4353 and 6363, is possible to generate the executable file for them? as they run into the target?

  Thank you

  Hello

  As crossrulz said, you can install LabVIEW versions side by side. View 2011 and 2012 with is no problem (I have 2010, 2011 and 2012 all on the same machine). You mentioned that your programs are PMExport. I assume you mean that you have LabVIEW executable (.exe) written in LabVIEW 2011?

  Executables do not require the development environment to run, but they do not require LabVIEW runtime engine. For executables built in LabVIEW 2011, you will need the runtime LabVIEW 2011 (or the 2011 SP1 one). For screw written in 2011, you can open directly into the development environment 2012 and run them. Note that if you save the they will be now 2012 screws and Save for the previous Version , you will need to reopen them in 2011.

  Hope that helps,

  Jeff P

  Product Support Engineer

  LabVIEW R & D

  National Instruments

• Internet Explore cause and questions

  Hi all

  In my organization, we have windows 2008 r2 server. and there's that Clint thin 12 and 12 people accessing the server for the site Web Nakuri and Monster Internet Explore. It worked well all suddenly all apps crashes after 2 to 3 hours and internet explore no longer take restarts for that. After the reboot, it works fine.  I took the results of the SFC scan found good. in the event records its showing application error. and one thing I must mention my server ram is 4 GB I it will increase today.  but please guide his problem to me at all times.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.