Disk Defragmenter cannot defragment volume HP_recovery (D)

Similar Questions

• Disk Defragmenter cannot open

  I try to defragment the disk, but I get this error message. disk defrag cannot open. Thanks for any help

  The exact wording of your error message would be useful? If you have installed an another disk defragmenter?

  Most Defragmenter problem arises a disk problem. Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.

  Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.

  If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.

  However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.

• Disk Defragmenter cannot find in my system tools

  I use a Dell with Windows XP laptop

  
  
  I want to defragment drive C to make the machine run faster
  
  
  Pls advise what I need to do.
  
  
  Ramesh Phadnis

  Hey riri,.

  ·         Have you been able to use the tool sooner?

  ·         Did you do changes on the computer before the show?

  You can check if this article helps.

  Disk Defragmenter does not work on a Windows XP-based computer

• Windows xp home edition. By windows/system32/autoconv.exe defragmentation cannot defragment the file autoconv.exe. delete the file?

  As autoconv.exe can not run in system32, delete the file? Dan Pettit

  Autoconv.exe is a module related to the Auto File System Conversion Utility from Microsoft Corporation. \r this file is part of Microsoft® Windows® operating system. Not essential, but be careful Delete it. I would recommend to run your Windows XP disk repair utility instead.

  Please rate me upward if you find my post helpful. Thank you!

• Disk Defragmenter is not a full defrag with Windows XP Service Pack 3 installed

  I'm trying to get the Disk Defragmenter in Windows XP to defrag my computer.  However, Disk Defragmenter cannot finish defragmenting more.  I installed Service Pack 3.  Disk Defragmenter has worked very well until what Windows Update installed Service Pack 3 on my computer.  How can I get the Disk Defragmenter to complete my computer defragmentation?

  Hello to both,

  Sorry, but I do not know why defragment will not end.

  Try to run mode without failure.

  If this does not help try this very good free defrag program

  .

• Windows 7 Disk Defragmenter does not work

  All of a sudden, I get the following error message when you try to run Defrag

  "Disk Defragmenter cannot start the Task Scheduler service is not running. Start the Task Scheduler service and try again.',

  that does not work.

  Assuming that task scheduler was enabled and the Defragmenter tool still does not work, here is a routine that I have compiled over time which proved to be effective to solve the problems of Defragmenter:

  There are several reasons why the built-in Defragmenter may not work correctly:

  0. it is malware on the system. Solution: Run an anti-virus control and also a spyware check.

  1. the disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  2. the disc is damaged and must be repaired. Solution:

  a. open "My computer" and right-click on the drive that you want to disable frag.
  b. Select 'Properties' and click on 'tools '.
  c. Select "Check now" to check the drive for errors.
  d. Select the two options and click on 'start '.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  3. Disk Defragmenter can be altered, needing a system restore to fix it. Solution:

  a. start - all programs - Accessories - System Tools - System Restore (click here to open);
  b. Select a good restore point before you start having problems with Disk Defragmenter.
  c. start the restore process and let an end (descriptive name of something restore operation as "Repair Defrag").

  4. There are other programs that run the Defragmenter interruption integrated. Solution:
  a. close all running programs.
  b. If you think there may be some programs that run in the background.
  c. press Ctrl + Alt + Delete and
  d. Select "start Task Manager".
  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  5. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).

  6. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with her and stalking interference may not be easy. Note: Some versions of Windows 7 disables the ability to run the Defragmenter built-in in safe mode. If disabled, it will say when you try to start it in safe mode.

  7 Disk Defragmenter may no longer be on the system or is damaged while it needs a re - install. Solution: Reinstall the built-in function.

  There are several ways to re - install the built-in Defragmenter:

  A:
  a. open the menu 'start '.
  b. type '% Windir%\Inf' in the 'Search' box and press 'Enter '.
  c. in the window that opens, find the file named "dfrg.inf.
  d. right-click on "dfrg.inf" and "install".

  B:
  a. go into "start > run" on your computer.
  b. Type "rundll32.exe setupapi, InstallHinfSection DefaultInstall 132% windir%\inf\dfrg.inf" and press "Enter."
  3. click 'OK' to make the program automatically reinstall itself.

  C:
  a. go to start > all programs > Accessories > right click on command prompt > select 'run as administrator '.
  b. at the command prompt, type "regsvr32 dfrgsnap.dll" and press "enter."
  c. type 'regsvr32 dfrgui.dll' and press 'Enter '. This will reinstall the missing Defragmenter files.

  8. most of the problems will be solved by #6 above, but if not, and if your windows installation is otherwise working well, you should consider to download a free trial of a Defrag tool commercial rather than drastic measures to restore the functionality built-s. Third-party programs are more robust and many work in the background, so you can use your PC during defragmentation.

  Most third party programs offer a free, fully functional trial (better ones are for 30 days). Install one of them allows you to disable built-in and if you decide to uninstall, removal will replace the built-in function, repaired several times in the process: it's worth a try...

  Here's a recent Top 10 comments side-by-side comparison of the best available defragmentation programs:

  http://Disk-Defragmenter-software-review.TopTenReviews.com/
  Place it at the top of the page is the only defrag program that also prevents the fragmentation (see comment).

  Why is it good to prevent fragmentation?

  Basically, it significantly increases life expectancy of your hard drive (especially since you don't have to leave the system on all night - a much 'greener' agricultural practice), not to mention it also increases the performance of the system.

  Find out what the review has to say on this.

  Good luck to you!

  Bill R TechSpec

  PS: If still no go, repair may involve editing the registry or repair installation of windows and possibly re - install windows itself. These aren't simple solutions. If so, indicate if they can be provided.

• Disk Defragmenter could not start the service task scheduler is not running. Start the Task Scheduler service, and then try again.

  im getting this message if I want to run Disk Defragmenter... "Disk Defragmenter cannot start the Task Scheduler service is not running. Start the Task Scheduler service and try again. "tried to start the Task Scheduler on services.msc, but it gives me the message" windows could not start the Task Scheduler on the computer local error 2: the system cannot find the file specified. '. »

  Hello

  See if run the checker (SFC.exe) system files using the parameter/scannow help.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:
  http://support.Microsoft.com/default.aspx/KB/929833
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• error defragmenting the Disk Defragmenter has detected Chkdsk/f. is supposed to run on this volume, please run chkdsk

  I'm trying to defrag and I get a message saying ' Disk Defragmenter has detected /f. Chkdsk is supposed to run on this volume, please run Chkdsk.»  How am I suppose to do?

  Use my computer to access the list of HDs. right mouse click on the drive in the list. Choose Properties error checking check now.

  Run the check.

  If the drive that contains Windows, the system will restart and check the disc. After rebooting the system, you can run the Defragmenter.

  Tom Ferguson

• I can not defrag.my PC, it is constantly in a X box [Disk Defragmenter has detected that Chkdsk is scheduled

  complete the question was in my title.thank you

  When you try to defragment a volume and Disk Defragmenter reports:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
  Please run Chkdsk /f.

  This means that the volume that you want to defragment was marked 'dirty' XP.  This is not necessarily all of the data has been lost on the volume, it simply means that XP thinks that the volume should be checked to find errors because of something that happened before.

  You won't be able to defragment the volume until the dirty bit has been removed.

  This does not mean that a disk check is scheduled to run, and you can't cancel what needs to happen in this case because this isn't the problem.

  Also the dirty bit is not set on a volume, you can still run a disk defrag with a record of date of arrival in the meantime (try).

  Entry of commands to reset or erase a disc awaiting verification or suggestions for changes to the registry to make changes is a waste of time - that is not the problem.

  A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination.  One of these events?

  When XP starts, it automatically checks the bit of impurity on each volume.  You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed.  If you have a hard drive where the dirty bit will not disappear, you can tell XP not to check.

  If the starting XP detects that the volume is dirty, it will be automatically run the check disk with error correction (chkdsk/r) and try to fix the problems detected.

  If the chkdsk command succeeds, it clears the dirty bit, and then you can defragment the volume.

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is the volume of your sale or it is not dirty?

  You cannot use fsutil or chkntfs from a command prompt to delete the bit of impurity on a volume.

  The only thing that can clear the bit of impurity on a volume is chkdsk /r (or chkdsk/p).  You could tell XP not to check the bit of impurity on a volume where the dirty bit does not erase, but this probably isn't a good idea since there is some sort of problem on the volume.

  You will be not also solve this problem by editing your registry database (pay attention technical support engineers and moderators of Forum)-is not the problem.

  Once a volume is marked as dirty, the only way to clear the dirty bit is to run "chkdsk/r" or "chkdsk/p" when the volume is not in use.  The only way a volume can not be used while XP is just starting to load or from the XP Recovery Console.

  If XP will not run chkdsk correctly when your system restarts or the dirty bit will not erase as it should, you need to look in the Event Viewer log chkdsk and see what is happening and fix it.

  If XP will not always clear the dirty bit, you need to run chkdsk/r of the XP Recovery Console so you can look and see what works and run it again until it works.  If your hard drive fails, you may never be able to clear the dirty bit, in this case, you can also say XP never check the afflicted volume dirty bit (this will usually do the trick).

  Saying XP not to check the bit of impurity on a volume would be risky behavior because there would always be some kind of problem with your hard drive.

• Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume (c)

  My computer is as follows: 2.80 ghz, 4 Pent, Intel, HP d530 SFF (PB603a)

  I am running Windows XP PRO SP3. v2.18

  1. When you try to defrag my computer to speed it up i get: DISK DEFRAGMENTER has DETECTED THAT CHKDSK IS SCHEDULED TO RUN VOLUME C: Please RUN CHKDSK C: /F

  I'll then: run cmd, then type chkdsk C:/f/r and I get: THE TYPE OF FILE SYSTEM IS NTFS. CANNOT LOCK THE DRIVE CURRENT.

  CANOE FOR CHKDSK TO RUN BECAUSE THE VOLUME IS IN USE BY ANOTHER PROCESS. WOULD YOU LIKE TO SCHEDULE THIS VOLUME BE CHECKED THE NEXT TIME THE SYSTEM IS RESTARTED? I selects Y and I roboot system, but nothing happens. I do not get a blue screen or any other people say they get.

  2 error Checking: select two options (Auto trouble & scan and attempt recovery of bad sectors. I get the following error message:

  WINDOWS COULD NOT PERFORM THE DISCK CHECK

  These errors appear when I am logged in SafeMode as well. I'm about to become bald of pulling my hair because of the frustration it causes me. If anyone has any ideas can you please help me.

  Did you insert a space between "C:" and "/ F"?  It is not clear in your answer.
  -JW

• Message ' Disk Defragmenter has detected that chkdsk is scheduled to run on the evolving: (c) "when I click on either analyze or defragment.»»

  Original title: Disk Defragmenter

  When I click on either analyze or defragment a window appears to indicate that, Disk Defragmenter has detected that chkdsk is scheduled to run on the evolving: (c).

  Please run chkdsk/f. My PC is XP service pack 3 - Pro

  Please tell us the next step that allowed me to start my disk defragmentation. Thank you.

  Hello

  -Did you do changes on the computer before this problem?
   
  I suggest you to follow the steps from the link and check if it helps.
  How to defragment your disk Volumes in Windows XP?
  http://support.Microsoft.com/kb/314848
   
  For reference:
  How to analyze and defragment a Windows XP disk?
  http://support.Microsoft.com/kb/305781
   
  Hope this information helps.

• What is this average, Disk Defragmenter has detected that chkdsk command is schduled to run on the volume: (C). Please run chkdsk /f.

  Been trying to run the defrag on my C drive and this message keeps coming up.

  When you try to defragment a volume of that Disk Defragmenter reports:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
   
  Please run Chkdsk /f.

  This means that the volume that you want to defragment was marked 'dirty' XP.  This is not necessarily all of the data has been lost on the volume, it simply means that XP thinks that the volume should be checked to find errors because of something that happened before.

  You won't be able to defragment the volume until the dirty bit has been removed.

  A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination.  One of these events?

  When XP starts, it automatically checks the bit of impurity on each volume.  You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed.  If you have a hard drive where the dirty bit will not disappear, you can tell XP not to check.

  If the starting XP detects that the volume is dirty, it will be automatically run the check disk with error correction (chkdsk/r) and try to fix the problems detected.

  If the chkdsk command succeeds, it clears the dirty bit, and then you can defragment the volume.

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is the volume of your sale or it is not dirty?

  Since XP of course already thinking that the volume is dirty, XP will automatically run chkdsk when it restarts to try to clear the dirty bit, in order to plan another running chkdsk can not help you much.  Sometimes the auto chkdsk on a reboot will be not only clear things to the top, but you can try it.

  I would like to start in the XP Recovery Console and run chkdsk /r from there you can actually watch and see what happens and decide what to do about this.  When own running chkdsk/r, it clears the dirty bit unless your HARD drive is somewhat distressed.

• Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume HP_Pavillion (C). Please run Chkdsk /f

  When I try to defragment my hard drive a message comes up saying

  Original title: defragment my hard drive

  "Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume HP_Pavillion (C). Please run Chkdsk /f

  I have no knowledge of this annex, or how to make it work, but I need to remove this message before it will allow me to do a defrag, any ideas?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  When I try to defragment my hard drive a message comes up saying

  "Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume HP_Pavillion (C). Please run Chkdsk /f

  I have no knowledge of this annex, or how to make it work, but I need to remove this message before it will allow me to do a defrag, any ideas?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Restart the computer and let chkdsk to complete its work.

• Windows cannot run disk checking on this volume, because it is write protected.

  I can't get the start menu appears in safe mode then I have botted on a cd with the command prompt and when I type chkdsk/r, so, it gives me "windows cannot run disk checkingo n this volume because it is write protected."  Can someone tell me what I can do to fix this?

  If you encounter a problem that you need help, follow these steps:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  Fill in the blank: my system worked well until: _.

  If you just want to start by running chkdsk /r on your hard drive (a good idea), I would follow the instructions below:

  Use the XP Recovery Console to check the file system on your HARD drive and fix all the problems.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Disk Defragmenter has detected that Chkdsk is scheduled to run on the Volume: C:. Please run Chkdsk /f.

  I know this question has been asked several times, but I did these steps and still not get Defragmenter to work.  My Disk Doctor said I don't have problems with my Defragler work program - but I don't have a C: drive not 'dirty '.  I have Windows XP Home Edition and do not know how to run an XP Recovery Console.  Y at - it an easy way just to get the Defragmenter to work?... when I run Chkdsk... It goes through stages and then closes and the problem is still there.  Defragmenter just stopped working, my computer everything works fine.  Help, please.

  Hmmm...  It should only take a few minutes for ImgBurn to create the bootable XP Recovery Console CD, then maybe one of the songs that you have downloaded (xp_rec_con.iso or install IgmBurn) won't quite right.

  You want ImgBurn to play a happy tune when it is successful and a "Oh no!" message when it fails, but it shouldn't take hours to burn this ISO file bit.  You can try another system.  You can always uninstall ImgBurn when finished.

  I say 'be patient' when you run the chkdsk /r command because sometimes it seems to be stuck (or even go back), but it should end later.  Depending on the volume size, the amount of data on the volume, the speed of your system and what the chkdsk finds to do, you can watch several hours.

  Look at these words from the mouth of Microsoft:

  If you use chkdsk /f on a drive or drives for very large (for example, 70 gigabytes) with a very large number of files (for example, millions of files), chkdsk may take a long time (for example, over several days) to complete. The computer is not available during this time because chkdsk does not relinquish control until it is completed.

  At the time of this writing, I'm guessing a disc 70 GB was "very large" but it is quite modest by today's standards.

  Now with today's technology, it is unlikely to take days, but it could still take some time!  If your HARD drive is afflicted with a problem material and dying, it can never finish or be unable to fix things.

  To start XP, it automatically checks each volume to see if it is dirty and will try to run chkdsk from the afflicted volumes.  Sometimes, it's good enough to clear the dirty bit, sometimes it isn't.  You will see a message at startup if the volume should be checked for consistency and XP will do the best.

  That's exactly what the message tells you:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))

  You can query the dirty bit on a volume from the command prompt window.

  Click Start, run and enter in the box:

  cmd

  Click OK to open the command prompt window.

  To query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Type "exit" to close the command prompt window.

  If you are suspicious of your HARD drive and think it might be failing, now would be a good time to backup your personal data (documents, pictures, music, etc.) to an external location - a separate attached USB drive or a few clouds on the Internet.