Disk Defragmenter displays "Disk Defragmenter was planned with the help of another program." ScheduledDefrag task: The task image is damaged or has been tampered

Similar Questions

• Backup error: the task image is damaged or has been tampered with, (0 x 80041321)

  Original title: can not save files.

  I tried to back up my files but, when I pressed "Save settings and start Backup", which ends up was: backup file could not save your automatic backup settings for the following reason: the task image is damaged or has been tampered with, (0 x 80041321). Please try again.

  I tried several times but it does not change... What should do? I'll have "nuts"...
                                                                     

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-code-0x80041321-while-performing-data-backup/c845af02-0121-4cc7-ba1b-a1f9268ee525

  It will be useful.

• Error "task BackgroundConfigSurveyor: the task image is damaged or has been tampered with." When I click on Task Scheduler

  Original title:

  When I clicked on Task Scheduler I got the following error message: "BackgroundConfigSurveyor of the task: the task image is damaged or has been tampered with."

  When I click on the OK button and try to go I had error messages and I need to get out the Task Scheduler.  I tried to fix by restarting my computer once again by clicking Task Scheduler - result error messages persist.  Help!  How can I 'corrupt' Task Scheduler?  Please give me detailed instructions.

  Hello

  You did changes to the computer, before the show?

  Method 1:

  Run System File Checker analysis and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Check out the following link.

  MS10-092: vulnerability in Task Scheduler could allow elevation of privileges

• Error: The task image is damaged or has been tampered with 0 x 80041321

  I recently returned to windows7 home premium after using windows 10.  Now when I try to save it on my external hard drive Seagate, it says no backup has been set up.  So, I put in place and while doing that, I get the message "the image of the task is damaged or has been tampered with (0 x 80041321).  So I tried again and said that I would choose the stuff to back up.  I unchecked the box to include an image of the disk system.  The same problem.    My external hard drive works.  I went back to the 10 7 on my laptop and can backup on the external drive without problem.  Suggestions?

  Well, this means that not only your broken backup job are (yet) but if all other Windows 7 tasks planned - as you can see, when you open Task Scheduler.

  There is a fix for this problem with scheduled tasks that you can investigate:

  A nice person Dijji he named has already understood this problem and developed a method/nifty program to redress the scheduled tasks and people report that this method works very well and you can read about it here:

  https://repairtasks.codeplex.com/

  It might help to better understand the problem if you read through the House and the Documentation tab first if you can walk through the repair process.  Note that there is a separate tab of Discussion where people report the successes, issues, questions and problems.  The Discussions are useful too when you read them and see what kinds of things people that you meet and how to fix them.

  There are a few other issues MS Answers where the CodePlex solution straightened things (you can see that it actually works).

  CodePlex has worked for other people:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/task-scheduler-multiple-image-is-corrupt-or-has/6205cb04-A749-4f4f-A5be-632e01989158

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/task-image-is-corrupt-and-get-an-error-code-with/955d2639-bf5e-47B0-81e9-569bf0d308d1

  If you browse these topics, you need to browse all the other ideas that do not work, but ultimately the work of methods of CodePlex.

  CodePlex solution is where to go next if you want to attach to the top of your scheduled tasks.

• Error opening Task Scheduler: "task image is corrupt or has been tampered with. mcupdate.

  original title: Hello! When I open the task schedule that I get the following error, task image is corrupt or has been tampered with. mcupdate "windows vista home premium SP2" tried various solutions can help.

  cannot say exactly how much time I had this problem when I'm browsing I get windows does not quite agree FAQ

  and when I'm srolling on a website that the page will start to develop until you can't do anything about this page, I have to continualy do right click and update

  After a few seconds, I update again. I use norton 360,6 internet security and norton utilities, I do not know if what I am about to talk about has a prevalence.

  about 2-3 months, I bought Uniblue powersuite, is not thinking that he could not work along side norton360 and utility. I uninstalled Uniblue powersuite:

  as you know that uniblue accelerates, cleans your registry and defragments Tweeks your computer, as well as of other activities.

  I tried windows help and support guide to find a solution, probably do not know what are the things to try.

  can help you.  or it's back to factory reset!

  Hello

  I suggest you perform the steps mentioned in the link.

  task image is corrupt or has been tampered with. mcupdate

  Explorer Windows does not

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Internet Explorer 9 is also compatible with Vista. If youstill would like to Uninstall IE9, follow the steps described in this document.

• Task image is corrupt or has been tampered with 0 x 80041321

  When I try to do a monthly backup he want to do. It gives me the task image is corrupt or has been tampered with 0 x 80041321. I checked for the sheerstrakes & they come back clean. Can someone help me please?

  Hello

  I just thought that this solution given by karena on page 2 of this thread (about three entries down) was too broad. especially the part where he proposed deleting all subkeys.
  I had a similar problem with my sched task / tasks corrupt and the steps you suggested would not own tasks re-created to replace those corrupted.
  FAR the most complete way to solve the problem is by using regedit to tasks, as well as correct tasks corrupt in the system32 folder.
  all the steps can be carefully described to get the right solution in the following microsoft support article:

  MS10-092, specifically this support page: http://support.microsoft.com/kb/2305420

  While it covers a problem in the sched task caused by a windows update, the real problem is exactly the same, with the same corrupt task messages.

  This is the right way to solve the problem, he took a few steps, but it is not difficult. Just follow closely and difficulty only tasks that are a problem in your system.

  It's the more thoroughly to solve this problem.

• Impossible to create a point of restoration with the error message "task Mgr is damaged or has been tampered with. 0 x 80041321 ".

  Original title: Create Restore Point will create new not a point of restoration after upgrade to Vista Ultimate in Basic

  I get the error message. "Mgr. task is damaged or has been tampered with. 0 x 80041321."when I try to create a new restore point manually. But it appears automatically when I do a backup of files and when I planned for it, for in the system settings. How can I fix this problem

  Hello
   
   
  Thanks for posting your question in the Microsoft Community.
   
   
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
   
   
  
  Please follow the methods and mark the question below:
   
   
  Method 1:
   
   
  I suggest you try the steps mentioned below.

  Steps to re-create the Task Scheduler:

   
  a. Click Start; in the start search type regedit.exe and press ENTER.

  If you receive a consent prompt, click Yes.

  b. navigate to the following location.

  HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.

  c. save the changes and then close the registry editor.

  Now check if the Task Scheduler works.
   
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  
   
   
  Method 2:
   
   
  Step 1:
   
   
  I first suggest you to check if the Volume Shadow Copy service is running.

  a. Click Start, type Services in start search. When the page is open, look for Volume Shadow Copy service.

  b. right click on the Volume Shadow Copy service (VSS) and check whether it is started.

  c. If it is stopped, select start or restart.

  Check if you can try to create restore points after starting the service

   
  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  Step 2:

   
  If you have installed a third-party security software, then try to temporarily disable the security software and check what is happening.
   
   
  Disable the antivirus software:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
   
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 3:
   
   
   
  You can also try to remove the job from the location:

  C:\Windows\System32\Tasks

   
   
  How to find which task is damaged or altered.

  a. Click Start; type cmd in the start search. List programs, right-click on cmd and run as administrator.
  b. now run the following command

  schtasks/query | findstr /i

  Search

  ERROR: The task image is corrupt or has been tampered with.
  ERROR: Task cannot be loaded: the task name

  Find the name of the task, try deleting the task name, and then try to recreate.

  See the link below that solves your problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/dcb0fb2b-d1e3-4562-823f-cee16bfa4945

  
  a. Click Start, type Task Scheduler in the start search box and then click on Task Scheduler in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. the component shares of the Scheduler dialog box, click on create a task and check.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Windows vista the task image is corrupt or has been tampered with (0 x 80041321) Please try again.

  Windows vista the task image is corrupt or has been tampered with (0 x 80041321) Please try again.

  This happened after Windows update

  and no solutions yet!

  Dear Marilyn

  nothing worked, finally I deleted KB2305420

  now everything is OK

  Anyway thanks for your help

  SINA

• "The task image is corrupt or has been tampered with. (0 x 80041321)". ___

  When I try to run the backup this error pops up, 'the task image is corrupt or has been tampered with. (0 x 80041321)".

  I already tried the prievious solution and the first registry value is not found

  Chris

  Did you use a registry cleaner?

  Try the solution detailed in the following link:

  http://bertk.MVPs.org/html/reinstall.html

  Hope this helps, Gerry Cornell

• I have Windows 7 and I am unable to back up files. The following message appears: "the task image is corrupt or has been tampered with.

  * Original title: ease of backup Windows 7

  I have Windows 7 and I am unable to back up files.  The following message appears: "the task image is corrupt or has been tampered with.  I used an ERD without result.  The application discovers not a problem.   At the same time, I received a message that the Bitlocker system files could not be found.  I tried Windows 10 briefly then back to Windows 7.  That's when I started getting the message image corrupted

  Although many people have problems when back to Windows 7 after trying 10 Windows, before you reinstall Windows 7, you can consider the rest of the steps here--> https://support.microsoft.com/en-us/kb/2305420

• What is the average by "the task image is corrupt or has been tampered with. User_Feed_Synchronization-{3EC8FA92-41FD-4247-8c1b-2352FD58BE80}"... .it for the task planning

  I use Windows Vista Home premium 32-bit

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · When you receive this error message?

  Try the method below:

  a. open Task Scheduler.

  b. on the View Menu, select the option "Show tasks hidden".

  c. in the left menu, select "Task Scheduler Library".

  d. in the central section, the task of "User_Feed_Synchronization" right click and select Delete.

  e. exit the Task Scheduler.

  Then, select start / accessories. Right-click "Command Prompt" and select the "Run as Administrator" option.

  a. click on 'Continue' on the UAC prompt.

  (b) in the command window, type the following command: msfeedssync enable

  c. press ENTER.

  Note: This command will replace and update the task "User_Feed_Synchronization". This will not affect the news FEED that you subscribe to.

• Vista Task Scheduler - task image is corrupt or has been tampered with.

  I have a whole series of these messages everytime I open Task Scheduler.  More precisely:. AD RMS rights policy templates (manual) management. AD RMS rights policy templates management (automated). SystemTask. Microsoft-Windows-DiskDiagnosticResolver. Microsoft-Windows-DiskDiagnosticDataCollector. TMM, LPRemove. NAPStatus user interface. ConvertLogEntries. RACAgent. WSHReset, and ScheduledDefrag.  The problem started after I did a Vista repair install to solve a problem of Windows Update.  I tried setting SceduledDefrag, but apparently did not get it quite right since now my computer wakes up from hibernation and runs, she was much more often than it should it work as expected.  I could easily fix the problem if I could find a complete list of the tasks that Vista installs as default values (i.e. the conditions, the name of programs run, etc. for each installed task so I could remove the damaged copy and re-program the originals). or, better yet, a copy of the uncorruped file task I could download and install.

  Hey someotherguy_812,

  Because I don't know what programs they work with and without having to look at the computer, it is difficult for me to give you a direct answer. But I can provide resources that seem they could be very useful:
  First of all, this article describes the tasks scheduled in a default installation of Windows Vista. so we must do well in giving you an overview
  http://support.Microsoft.com/kb/939039
  In addition, if you use the quick order to schedule these tasks, this article should be good reading. It covers files damaged during the event planning.
  http://support.Microsoft.com/kb/329962/PT-b
  I hope that it allows to get to the answer you're looking for. If you still want to post what you have learned, we would be happy to keep trying until we have solve it for you.
  Thank you!

• planning task does not. Window, said the image of the task is damaged or has been tampered with. Google Updater software

  I can't use Task Scheduler.

  When trying a specific window

  The task image is corrupt or has been tampered with. Google Updater software.

  Grayers

  Hi Grayers,

  Follow the troubleshooting steps in thread to solve the problem with a corrupt image of task.

• Task Scheduler: several "Image is corrupt or has been tampered with." Guests after downgrading from win 10

  Hey all,.

  After trying 10 Windows for a bit, I decided to downgrade (via "Go back to Windows 7" in the control panel-> update of the security & -> Recovery Windows 10). Downgrade succeeded had no problem (at least at first glance), but for a number of tasks in the Task Scheduler, I am presented with the following message:

  "Image is corrupt or has been tampered with."

  I know that many of these tasks are not associated with Microsoft and others, but there is a lot I don't recognize yet. Having research this problem the only resolution is to either restore a previous backup or remove corrupt task (and restore if possible), however they contain is the problem, I'm not sure who I should restore (if any) and the restoration, any help would be greatly appreciated.

  Listed here are all tasks afflicted (half I recognize as Microsoft non - joint moulding at the top):

  ------------------------------------

  Uninstaller_SkipUAC
  Uninstaller_SkipUAC_Adam
  SmartDefrag3_UPdate
  Razer_Game_Booster_AutoUpdate
  Autoupdate1428970808
  ISM-UpdateService-4e00205a-2ab1-4423-8f77-cc25b82cde1d-Logon
  ISM-UpdateService-4e00205a-2ab1-4423-8f77-cc25b82cde1d
  GoogleUpdateTaskUserS-1-5-21-3733489001-1365333202-4051452697-1000UA1cfe8d182f5048
  GoogleUpdateTaskUserS-1-5-21-3733489001-1365333202-4051452697-1000UA
  GoogleUpdateTaskUserS-1-5-21-3733489001-1365333202-4051452697-1000Core1cfea8d16814bdc
  GoogleUpdateTaskUserS-1-5-21-3733489001-1365333202-4051452697-1000Core
  GoogleUpdateTaskMachineUA1cfeba514c17243
  GoogleUpdateTaskMachineUA
  GoogleUpdateTaskMachineCore1cfeba513c0c761
  GoogleUpdateTaskMachineCore
  Update driver Booster
  Reader BoosterSkipUAC (Adam)
  CCleanerSkipUAC
  Update BitDefender product Data_A17FD818A96743FAB28AC221BEB4B2C8
  AdvancedDriverUpdater_UPDATES
  Adobe Flash Player PPAPI notify

  UpdateRecordPath
  StartRecording
  SqlLiteRecoveryTask
  ReindexSearchRoot
  RegistrySearch
  RecordingRestart
  PvrScheduleTask
  PvrRecoveryTask
  PBDADiscoveryW2
  PBDADiscoveryW1
  PBDADiscovery
  OCURDiscovery
  OCURActivate
  ObjectStoreRecoveryTask
  MediaCenterRecoveryTask
  mcupdate_scheduled
  mcupdate
  InstallPlayReady
  ehDRMInit
  DispatchRecoveryTasks
  ConfigureInternetTimeService
  ActivateWindowsSearch
  HotStart
  BackgroundConfigSurveyor
  RacTask
  WindowsParentalControls
  SystemDataProviders
  SessionAgent
  GadgetManager
  AutoWake
  IpAddressConflict2
  IpAddressConflict1

  ------------------------------------

  Task of Bitdefender (Bitdefender product Data_A17FD818A96743FAB28AC221BEB4B2C8 update) I don't know what to do as I had reinstall Bitdefender in Windows 10 but was not necessary after downgrading - problematic because of the recovery should only have Windows and not restored Bitdefender done this task still pertain also to currently installed product?

  Thanks in advance

  I just came across another post on Microsoft Technet: Task Scheduler is broken after the downgrade from windows 10.
  Dave Green - MSFT wrote a program to discover and fix problems with Windows scheduled tasks. You can find it, as well as sources and an explanation of what he done, here: https://repairtasks.codeplex.com/

  There is also a difficulty my Task Scheduler here called

  I have not tried one of these

• Error 0 x 80041321 task responding image is corrupt or has been tampered with in wit

  Original title: error 0 x 80041321 task responding image is corrupt or has been tampered with.

  Did you use a registry cleaner?

  Try the solution detailed in the following link:

  http://bertk.MVPs.org/html/reinstall.html

  Hope this helps, Gerry Cornell