Disk Defragmenter does not open in Windows 7

Similar Questions

• Disk Defragmenter does not open

  Hello, I have an inspiron 530 with Vista and I wanted to clean up some files that I don't have anymore, I did but now Defragmenter will not open. Can someone point me in the right direction, thank you.

  See if there is a solution here.

• Disk defragmentation does not open. Command prompt opens and closes in a fraction of a second

  I've upgraded to windows 7 ultimate x 86 a few months on my Toshiba. Form below-

  
  I ran Disk Defrag when it was Vista Home Basic before the upgrade. 2 days, I just cleaned my hard disk of 8 GB of free space to the 37 GB is now. I wanted to revive Disk Defrag. Don't ask why or say that I owe.
  The point is, I can't even open the program. Is nothing in Task Scheduler. I had a 30 day trial Norton after my update for win 7. I noticed a lot of people blame anti virus for a reason, so I thought it should be mentioned.
  This is what happens when I run Defrag.exe from the C:\Windows\System32 folder. (Note: the screen command prompt runs command sfc/scannow & found and given nothing wrong)
  
  The prompt on the left window disappears quickly able to capture, and it seems important to my problem, I guess.
  Why in the world can't run the Defrag.exe at all? Any help? I'm positive I want to install a third-party Defrag.
  I hope that I asked the right way.
  Thank you
  Mickey

  Well, that's the question. I can't access the UI anyway what so ever.

  I decided to do a complete reset of the system and re - install Windows 7 Ultimate on my computer. The user interface of defragmentation works perfectly fine now. I guess I'll never know the problem I had, but at least it is fixed :)
  Rajesh, thank you very much and thank you for your quick responses!
  Mickey

• Disk Defragmenter does not open in Win Vista Ultimate.

  When I click on open it just flashes and disappeared. I can find the icon however

  When you right-click on the shortcut and look at the properties, the target area say % SystemRoot%\system32\dfrgui.exe?

  Can you find the target (dfrgui.exe) and click on that and get to open the defragmentation?

  What is a right click on the drive icon / properties / tools / defragment now has open Defrag?

  See if the fix for the file associations for .lnk (LNK) files help?

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Have you tried another user to see if they have the same problem?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

• Disk Defragmenter does not not (opening) in Windows 7

  After installing Windows 7 (Home Premium 64-bit), Disk Defragmenter does not work, Windows 7 menu, or by Accessories > system tools, or by a simple click on the .exe. Any suggestions?

  Thanks for the detailed response.

  The problem was in fact Norton 360 3.5, which is supposed to work with Windows 7, but who would not run its own Recovery Disk Defrag. I had a suervisor to Norton Commander remotely the computer to solve the problem, but all he managed to do was restart my computer so that I got the dreaded black screen saying "this is not a genuine copy of Windows 7". I solved that by starting in safe mode, using System Restore and then remove Norton (forever! No problem with Trend Micro). Disk Defrag eventually gave me a message that the parameters had been taken over by another program and allowed me to delete these settings. He then worked.

• Disk Defragmenter does not work.

  My Disk Defragmenter does not work... He asserts that he is defraging but the hour glass just stay there.  I tried to solve by disabling the Scheduler, but I am unable to take the green check mark in the box that tells me that this scheduler is enabled... Help, please

  Hello

  in vista, the defragmentation process works silently in the background

  you do not have to run it manually

  Unfortunately in vista it does not provide a GUI to show progress as it did in xp

  to do this, you'll need 3rd party defrag programs

  read the comments on these FREE below defragmentation programs and choose the one that you prefer to use

  http://www.SnapFiles.com/get/adiskdefrag.html

  Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

  http://www.SnapFiles.com/get/UltraDefrag.html

  UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option

  http://www.SnapFiles.com/get/puranfree.html

  Puran Defrag is a Disk Defragmenter easy to use which offers start defragmentation, automatic defragmentation, intelligent directory optimization, background (low priority) operation and optimization of free space. Other features include integrated planning, automatic reboot or shutdown after defragmentation and integration with Windows Explorer to defragment individual files from the context menu. The free version is identical in functionality to the standard version (shareware), but it is limited to a private, non commercial use

  http://www.SnapFiles.com/get/iobitsmartdefrag.html

  Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.

• I removed my C drive files/programs to free up space, but disk defragmentation. does not show that I removed as much as I did. What now?

  I deleted my hard C drive files/programs to free up space, but disk defragmentation. does not show that I removed as much as I did.  What now?  THX.

  you could try to run own Manager;

  Click Start > run > cleanmgr.exe

  you could try deleting your temporary internet files.

  Close the browser, open internet options control panel and look for the option to detele the temporary files.

  either by the way, how big is the hard drive?

• Regular disk defragmentation does not intervene. Computer can be in mode "sleep" during the defragmentation?

  Disk defragmentation. will take place every week at 01:00.  Computer is in "standby" at that time.  Is this why disk frag does not happen every week?  When I defragment manually I have to confirm the status of administrator... it would have something to do with it?  I use Windows 7 Home Premium.

  Hello Lauren,

  Thanks for posting your query in Microsoft Community Forum.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that disk defragmentation does not work as expected. When this works even if your computer is in "sleep". Therefore, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Step 1: Check if the Disk Defragmenter service is running.
  a. click Start and type services.msc in the search box.
  (b) in the Services window, double-click the Disk Defragmenter service.
  c. check if the Disk Defragmenter service is set to Automatic Started .

  Step 2: The question may arise also because of the intervention of third-party software. So, I suggest clean boot of the system and check if the scheduled defragmentation works.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair. "

  Method 2:

  Try to set the Defragmenter to wake up the computer from the mode "sleep" and check if it works.

  1. Click Start, type taskschd.msc and press enter.
  2. In the left pane, click the arrow next to the Task Scheduler Library, Microsoftand Windows to expand the folders.
  3. Click the defrag folder.
  4. In the center pane, right-click on ScheduledDefrag and click Properties.
  5. Click the general tab.
  6. Check the box run with the highest privileges .
  7. Click the Conditions tab.
  8. Check the box to enable the computer to run this task and click OK.
  9. Close Task Scheduler.

  Check if the Defragmenter works to wake up the computer from the mode "sleep" as expected.

  If Disk Defragmenter does not at all, then we can see the post from Bill R TechSpec responded on 19 May 2011 in the following thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-Disk-Defragmenter-does-not-work/87965977-1252-E011-8dfc-68b599b31bf5

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• GTA san andreas does not open with windows 7! How to silve this if you please help me

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: gta san andreas does not open with windows 7! How to silve this if you please help me

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Review the information from the Windows 7 Compatibility Center.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Grand%20theft%20auto

  He says that version 2 is not compatible.

  If Aero is the problem, disable it before installing the game and then turn back on.
  I would say as you right-click on Setup and select "Run as Administrator".

  I hope this helps.

  Marilyn

• Dfrg.inf is missing that is no doubt why Disk Defragmenter does not work. How can I recover it?

  How can I recover dfrg.inf?  It is absent and is probably the reason Disk Defragmenter does not work.

  An alternative Defragmenter that I use is defraggler is a free download at www.piriform.com/defraggler/download/standard

• I downloaded ie9, it does not open. a window opens as it tries to start and then stops (very quickly)

  I downloaded ie9, it does not open. a window opens as it tries and then stops (very quickly) no error messages appear.

  I tried to reinstall, ran a scan for problems, the saved settings. I can still access to safari or chrome.
  I noticed that some other features in windows now do the same thing while trying to open a new window and it does not work. I have vista 32 bit.
  IE9 is showing as a program and all the settings seem ok
  my windows will not install updates?

  Hi Robin,

  Since you are facing problems of opening IE 9 and a few other features in Windows, you can try these steps and see if it helps

  Step 1:

  Check if the problem persists in safe mode with network.

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with networking, you can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• CHKDSK freezes and Disk Defragmenter does not start

  CHKDSK would not normally start as it says that the hard disk was used?  Asked if I wanted chkdsk to run when you restart the computer.  Selected Yes.  Restarted.  CHKDSK has begun.  A frozen one hour in the audit process and would not move for hours.  Disk Defragmenter does not start also.

  Looks like you need run the diagnostics by the hard drive manufacturer, or
  the diagnostics that came with your computer and see what's happening with
  This hard drive.

  wrote in message
  News: * e-mail address is removed from the privacy... *

  CHKDSK would not normally start as it says that the hard disk was used?
  Asked if I wanted chkdsk to run when you restart the computer. Selected
  Yes. Restarted. CHKDSK has begun. A frozen one hour in the audit
  treat and would not move for hours. Disk Defragmenter does not start also.

• I have a cd of an MRI of 2010 that does not open on Windows 7

  I have a cd of an MRI of 2010 opebed Windows Professionak home page, but does not open on Windows 7. What can I do?

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  How to ask a question
  http://support.Microsoft.com/default.aspx/KB/555375

  Just a guess, but that's what you're talking about?

  Look at a DICOM (medical) CD on Windows 7
  http://www.Fencepost.NET/2012/01/viewing-DICOM-medical-CDs-on-Windows-7/

  You are using a 64 bit version of Windows for the first time?

  List of limitations in 64-bit Windows
  http://support.Microsoft.com/default.aspx/KB/282423#appliesTo

  Some 16-bit DOS programs and the command prompt does not work in mode full screen in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/926657

  32-bit and 64-bit Windows: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/41531554-d5ef-4f2c-8fb9-149bdc5c8a701033.mspx

  Some older software can run in a Virtual Machine scenario?

  Windows Virtual PC
  Download Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."    If you have an old XP CD (or other older Windows CD) available you can simply download the Virtual Machine and spend the XP Mode download.

  This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look.  Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).

  VirtualBox is an impressive VM competitor
  http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15

• Windows 7 does not open the windows in the taskbar. The content seems to be displayed off the screen

  Windows 7 does not open the windows in the taskbar. The content seems to be displayed off the screen. It started after the uninstall of Registry Mechanic and PC Tools, but this cannot be bound. IE 9 seems to be particularly affected. So do not display all of the windows that show on the taskbar.

  Use the Windows logo key & left arrow several times for each windows application through their positions until they appear on the screen.

  This problem is normally reported after someone used an external monitor as the applications try to open in the same position they had when they were last open - so if there was an external monitor last time now disconnected, they will try to open it in the middle of nowhere.

  I know not, or the other tools that you mention, but if they are registry cleaners then they could also affect other parts of your system.

• Disk drive does not open. What is a girl to do?

  I've been ripping CDs to music on computer, and now my drive doesn't open. Can you help me solve this problem?

  Hello

  If they don't help then check with the manufacturer of the system or in support of the Drive manufacturer,
  their documentation online and drivers and ask in their forums (if any) on the known issues.

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  ===========================================================

  If necessary:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">