Disk defragmenters should perform task does not

Similar Questions

• Is performed task does not work with redeclenchables meter?

  Hi all

  I have a few problems with an NI USB-6215 card, I am using. What I do basically generates a pulse of a certain frequency train, and I raise these trains of pulses with a digital input. So far, this works and there are no major problems with it. Now the part that I can't go to work using task Done.vi or wait is up to that Done.vi. I want to know exactly when the generation of these impulses have stopped so I can do some tasks and then trigger them again.

  When I use the task Done.vi is, I never seem to get any real output, who finished the generation of pulses of light. Does anyone know if there are problems known about this, or how I can get a signal to tell me that he stopped the generation of pulses? If I use wait until Done.vi I get more or less the same results

  Thank you!

  You can use the CO. PulseDone well with a property DAQmx Channel node:

  

  Christian

• How to fix iTunes?. It no longer starts. I reinstalled 10.3 and updated 10.6.8 repaired, repaired disk permissions, but it still does not boot to the top. TIA Pietrowiak

  How to fix iTunes?. It no longer starts. I reinstalled 10.3 and updated 10.6.8 repaired, repaired disk permissions, but it still does not boot to the top. TIA Pietrowiak

  There is a Snow Leopard update that would probably help.  It's called 10.6.8 Combo update.  Download and apply.  Then discover iTunes.

  https://support.Apple.com/kb/dl1399?locale=en_GB there is also a supplement that should also be downloaded.

  http://support.Apple.com/kb/DL1429

• I get the message that Scheduler tasks not preformed tasks does not

  Original title: error messages
  I get the message that Scheduler tasks not preformed tasks does not

  You have can not be programmed tasks, but one or several applications that you have installed probably made (without bothering to tell you).  Google is a likely culprit, but certainly not the only one.

  Most of these tasks are "phone home" search for updates of applications.  If you ask me, you're better off with tasks not running - but I'm sure that you don't like the error message at every startup.

  Rather than starting at the end with the section of the "Troubleshooting" section, begins to run and find out what's on demand - so you can decide whether you care or not that it is not performed.

  Click Start > Accessories > system tools > scheduled tasks

  The window tasks planned opens and you can see the list of tasks.  If you want the tasks to be performed, but they are not, then follow «troubleshooting» article  If you don't want the task to run, do a right click and 'delete '.

  Or, if you do not want to risk to delete something you don't know, but don't want the error of "missed tasks", right-click on a task, select properties and then uncheck the box in the tab 'Task' that says 'Enabled '.  This will give time to what the job is all about and why he could not be executed but will prevent the message "some tasks have been missed" to come whenever you start the search.

• DAQmx task does not

  Problem Description :Hardware: PXI-8184 (chassis PXI-1042), PXI-6221 (slot 2 in chassis)Software: LV RT 8.5.1, DAQmx 8.7.1 (see MAX.jpg)Problem: Task does not function within program (CounterRead.jpg). I can run the task within MAX (MAX.jpg) while the program is running and I can see the counts. All other tasks work fine. I have eliminated everything else in myprogram except this task and it still doesn't function and I get no errors. Also tried putting the task directly in the main program to no avail. I've tried different types for the task (raw, Counter Dbl 1Samp, etc).Thanks.
  
  NI Software :  LabVIEW Real-Time  version 8.5.1NI Hardware :  PXI Controllers, Chassis, and MXI device PXI-8184Driver Version :  8.7.1OS :  Windows XP
  

  It was a mistake to boot! An event of default would erase the name of task... it's the same for another sub - VI for other tasks so I'm not that. But it works now that I've totally simplified the Subvi. Two other people have worked on it in front of me (newbees) so I have a lot of cleaning up to do.

  Thanks for all the answers and sorry it was something so simple. It took me a while to get back into the swing of debugging stuff RT.

• just has got rid of the virus and responsible for all the disks but given the wifi does not work

  WiFi doesn't work do not

  just has got rid of the virus and responsible for all the disks but given the wifi does not work

  Hello

  Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
  for problems known.

  Actually, try updating your driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I thought that if I want my machine to boot faster I can move the fonts of the lokal disk documents folder so it does not start them all at the start

  original title: Fonts folder

  I thought that if I want my machine to boot faster, I can move the folder of fonts of the lokal disk to documents so it does not start them all at the start, and since I got them in the documents that I usually have no error saying that im their lack is this true? I have enough disk space hard as I don't care to remove them the reason why I want to do is if my machine starts as soon as possible thank you in advance!

  Don't listen to anyone who has you said that.
   
  The best way to speed up your computer is to eliminate startup items which are unnecessarily run at startup.  Go to start | Search and type msconfig and then see what is running at startup and what other services are underway then as well.  You can eliminate selectively and then evaluate how fast your computer runs.
   
  Steve
   
   
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I thought that if I want my machine to boot faster, I can move the folder of fonts of the lokal disk to documents so it does not start them all at the start, and since I got them in the documents that I usually have no error saying that im their lack is this true? I have enough disk space hard as I don't care to remove them the reason why I want to do is if my machine starts as soon as possible thank you in advance!

• Manager tasks does not

  After a virus attach that was eventually deleted by the antivirus... but something went wrong I don't know windows Defender, and the Task Manager does not

  Rgds

  Ayaz mirza

  Hello

  subject of windows defender

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  on the Task Manager

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  and make sure that your computer is malware free

  an anti-virus can not find any problems

  you need to scan with a good anti-malware program

  Download update and scan with the free malwarebytes anti-malware version

  http://www.Malwarebytes.org/MBAM.php

• ORA-13605: the specified task or object ADDM: &lt; task &gt; does not exist.

  Hello
  I use ORACLE 11g R2 & RHEL 5 DB.
  
  My task of bottom line is I want to send an AWR & ADDM report by mail to myself and the other members of my team all the hours for a particular user. I did a procedure for the same thing. When I perform this procedure from the sys user then it is run successfully and we even receive emails with attachments well. When I try to run this procedure from the particular user, it gives me the following error: -.
  
  "ORA-13605: the ADDM:1987121644_4118 of task or a specified object does not exist for the current user."
  
  When I explored my procedure, I found that the error was in the query that is used to generate the report of the ADDM. The same query within an enforcement procedure s successfully with the sys user, but not in the other user. The query is as below: -.
  

   select dbms_advisor.get_task_report(task_name,'TEXT','ALL') as ADDM_report
                       from dba_advisor_tasks
                      where task_id =
                            (select max(t.task_id)
                               from dba_advisor_tasks t, dba_advisor_log l
                              where t.task_id = l.task_id
                                and t.advisor_name = 'ADDM'
                                and l.status = 'COMPLETED')

  When I accessed the sight of dba_advisor_tasks separately then I saw that each task the ower name was "SYS" user. So its gives me error when I have the fire of the other user. When I run it from SCOTT I get the following error: -.
  

  ORA-13605: The specified task or object ADDM:1987121644_4017 does not exist for the current user.
  ORA-06512: at "SYS.PRVT_ADVISOR", line 3189
  ORA-06512: at "SYS.DBMS_ADVISOR", line 590
  ORA-06512: at line 1
  ORA-06512: at "SCOTT.SEND_MAIL_FOR_AWR_ADDM_REPORT", line 72
  ORA-06512: at line 2

  I tried to use the view data dictionary with 'USER_'... like USER_advisor_tasks, but this returns null if it doesn't produce any report ADDM.
  
  What should I do to run my (other than the user SYS) user SCOTT procedure and must generate the ADDM report.
  
  Thanks in advance.

  Look at the signature of the function:

  function get_task_report (task_name      in varchar2,
                            type           in varchar2 := 'TEXT',
                            level          in varchar2 := 'TYPICAL',
                            section        in varchar2 := 'ALL',
                            owner_name     in varchar2 := NULL,
                            execution_name in varchar2 := NULL,
                            object_id      in number   := NULL)
    return clob;
  

  See owner_name.

  So:

  select owner,task_name,
         dbms_advisor.get_task_report
         (t.task_name,'TEXT','TYPICAL','ALL',t.owner) as ADDM_report
                       from dba_advisor_tasks t
                      where task_id =
                            (select max(t.task_id)
                               from dba_advisor_tasks t, dba_advisor_log l
                              where t.task_id = l.task_id
                                and t.advisor_name = 'ADDM'
                                and l.status = 'COMPLETED');
  

• After the automatic update of Windows 7 - Manager of tasks does not work

  Automatic update has occurred.  Now the Task Manager does not come with window with tabs upward.  Only a window with two columns ('Mission' and 'Status') and three option buttons ("end task", go to "and new task" ").  Even not a 'close button' - may not only close to the taskbar.

  Hi rw9683,

  ·         Have updates you installed?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Method 2: Follow the steps in the article.

  Using the Task Manager: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/using-Task-Manager-frequently-asked-questions

  Method 3: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Scheduled task does not exist, yet still short

  Some time ago I implemented a simple batch file as a task scheduled to run at 07:00 every day, and he does so since then.  It starts DTExec.exe to do a load of data and send me an email when it is successful.

  Now I want to change the run time - but I can't find work anywhere!  I do not see it in Task Scheduler (and yes I putShow hidden tasks ), the task name appears nowhere in \Windows\Tasks or \Windows\System32\Tasks

  No schedule in such a way does seem to exist - yet the task always runs daily so there must be somewhere!  If not, where can I get?

  (It's on Windows 7 Home Premium, and my account does not have administrator rights. The task of the TA is configured to use the system account.)

  More info: looking at the logs with Event Viewer, I see in the application log an entry at 07:00:22 to SQLISPackage100 that says that my task is completed then.

  But the newspaper Windows/TaskScheduler operational, there is no event at 7:00!  There is something to 06:52 then the following entry is RacTask starting at 07:14:16

  Is there something in windows that can perform tasks of the user to fire time OTHER than Task Scheduler?  Maybe I'm looking at the bad service?
  Ah - that's all!  Opened by SQL Agent jobs do not appear in the list of Task Scheduler (and I had forgotten that I would be implemented in this way).

  > Article 2nd Wright of debugging: If you can't find the bug, looking for it in the wrong place.  (1st rule: there is always a bug.)

• External task does not work

  Hello

  I try to call a batch file that has copied the fdr files from one folder to another and runs sarmanalyzer to generate csv files in the disqualification landing area.

  The batch file works well when called from the prompt command or double click on the server of the disqualification, but does not work as expected when it is called project or work.

  I have generated a log file that confirms that the log file is running of the task for the last line, but commands to copy and file sarmanalyzer don't work quite simply.

  Pointers are greatly appreciated.

  Thank you

  SID

  SID,

  I don't know enough about the security of windows so I don't know if the Network Service account should run or not, but there is certainly a problem of security here [Account NetworkService (Windows)]. You certainly have correct permissions on the sharing of this machine [Note that it is not seeking to connect by using a domain account]. You can also change the service runs under a domain account - you can test it by running tomcat using your logon credentials. It would be the equivalent of the execution of the batch from the command line.

  Thank you

  Nick

• see tasks does not appear below the image click on pick-up points

  the cursor from tasks view does not appear below the image, when the spot removal tool is selected. This is the case since the installation of Lightroom cc. How do I rectify this error?

  Press T to display the toolbar and it should appear.

• Backups taking over 130 GB of 160 GB, getting 'Startup Disk Full' and the computer does not. Help!

  I fight for free space on one of my older iMacs work and I am to the point that we cannot use it because the startup disk is full.  I've recently upgraded to Snow Leopard OSX Lion (10.7.5) so I could update our video editing software, Adobe Premier.

  We run all our video projects on external hard drives, which does not have the boot disk space and are always good on the erasure of files from the Recycle Bin, audio, photo and video so that they are not get bogged down.  About this Mac shows my 160 GB boot drive contains 8.87 GB Audio, 7.69 GB, 6,49 Photos GB movies, 6.58 GB Apps and a huge 129.34 GB of backups.  I have time Machine backed up on an external hard drive and can't seem to find out where these files are to be removed from the startup disk.

  Turn off time Machine and restart does not clear space.  I have even made the Terminal kill command no matter what auto backups, deleted device and old library version in iTunes, etc.  and I have no backup label appears when I bring up the screen of star wars of the time Machine. I went through so many stages and suggestions to get this machine working again.  I understand these backups are supposed to remove themselves automatically, but why are there still first place if I save on the outside?

  PS I'm not very computer savvy, but I know my way around.  Additional suggestions are appreciated - please let me know if I need to provide more information.

  http://www.howtogeek.com/212207/how-to-free-up-space-used-by-time-machines-local - backups on your mac.

• Satellite M100: Icon battery bar of tasks does not display time remaining

  Hello

  I have a Toshiba Satellite M100. It has windows XP Home, with no changes made (this is how it was preinstalled). I noticed that when I go over the battey icon only other percentages are displayed, not the rest of the time. I have a friend with a laptop L100 (which is quite similar to mine as material) which shows the remaining time in hours and minutes. You have any ideea, what should I do, I really want to know the time not a few percent.

  Thank you in advance.

  The same situation here! I noticed that the status of time does not appear on all models of laptops. I put t know why it is only a restriction of the power saver version.

  In my opinion, it is not so important, because I believe that the specified time is not realistic. This always depends on the use of the laptop.

  Good bye