Disk is read only-no matter what I do...

Similar Questions

• disk is read only

  disc shows pieces of music, but cannot play the disc is read-only. How can I change this so that the music will play

  Thanks for your help. I think I have a bad burn.  Well.

• Files and folders stuck in read-only

  My folders and files stuck in read-only

  It would be useful that you told us how you know that they are stuck in "read only".
  For files, right clicking and selecting 'Properties' will reveal a "Read only" checkbox  Unlike what seems obvious, this box has nothing to do with a property read-only on a folder

  "You can not view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7"
    <>http://support.Microsoft.com/kb/326549 >

  The files are another matter.  How do you know that it is read-only and what you have tried to change it?  You have XP Home or Pro? Is active Simple file sharing?  What is the location of the files with that you have problems?  Error messages?

  HTH,
  JW

• Error: "CHKDSK cannot continue in read-only mode" when you try to run it on the E: drive.

  Original title: CHKDSK does not work on my Windows 7 laptop

  I'm trying to run a CHKDSK on my external Hard Drive E: but everytime I try to CHKDSK E: in the shell, all I get is

  "This type of file system is NTFS.
  Errors found. CHKDSK cannot continue in read-only mode. »
  (That's all I get, nothing in between)
  I tried to make the Tools section of error checking, but it does not work there either...
  If this is a problem with the operating system, I don't have a Windows 7 disc because my laptop came with it pre-installed
  So, what should I do?

  Hello Rayzorexe,

  Thanks for the response back.  You are able to start your computer and get the recovery options?  From there, you can run "Command Prompt" and I want to know if you are able to run Chkdsk from there successfully.

  Are you the same response from the commands below:

  Type 'chkdsk e:' in the command prompt. Press 'Enter' to run the utility to check the disk in read-only mode. He locates errors but does not fix the

  Enter 'chkdsk e:/f' in the command prompt. Press 'Enter' to run the disk check and correct errors without analyzing bad sectors.
  

  Type 'chkdsk e:/r' in the command prompt, press 'Enter' to do a thorough analysis of the sectors and files and repair any problems found.
  

  Recovery options:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

• External hard drive says its read-only and wont allow any changes

  My IQ505a has an attached external USB drive which is a drive external drive USB Western Digital 3200JS, and for a reason that I am unable to make changes to the data on the disk because the system apparently marked the entire disk in "read-only" mode.

  I put my account as an administrator and belong to the Group of Directors with all the usual permissions, except that I'm unable to disabled marking read-only on this drive.

  I also tried to connect and make these changes with the administrator account, but nothing helped.

  This problem is only with the external drive and not on the embedded player.

  Any help would be most appreciated ith this issue frustrating.

  mclwlg

  NZ

  Concerning
  mclwlg - NZ

  Get on the Internet and found many others with external drives, Vista and this issue.

  Found this fix (solution?):

  Go to the computer, do a right-click on the icon of the drive, properties, tools, check now. Uncheck the two boxes and click OK.

• Re: My driver TEAC DV-w28ECT used to read DVD and CD now it reads only DVDs

  My TEAC DV-w28ECT driver used to read DVDs and CDs, now, he reads only DVDs. What's happened and how can I solve this problem? I have Windows Vista

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

• Read only editor?

  I use 1.5.4 and I m confused with something,
  When I connect to the database, whenever I want to open an object in the tree that shows the purpose of connection/Type/Etc, if I click on an object (say, a stored procedure or package body), I receive a read-only editor. If I double click, I get a r/w Editor, where I can edit the object, more an another read only the Editor (2 copies of the same code) which is quite confusing. Is this new in 1.5.4? Is it possible to completely remove the editors only read or change the behavior?
  
  Thank you.

  This feature has been there since the beginning, but has been a source of frustration for many users, so we'll change it for our next release in a single editable tab. Our argument has been that all objects, tables, views, etc. are all read only editors, until what you click on the button Modify. What is confusing about PL/SQL nodes, it is that the code is displayed first and so it seems that you can change. Fortunately I double click and select the Edit tab and I'm missing. It prevents users from editing the code accidentally.

  What you may have encountered at the point 1.5.4 is we offer one click or double-click the preference for the opening of the publishers. If this preference is changed from the previous version, it can feel different.

  Sue

• CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

  CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

  Hi leejarvis,.

  ·         What version of the operating system is installed on the computer?

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Have what troubleshooting measures you tried?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Hard locked read-only disk

  Ive had this problem once before. I turned on my PC yesterday and my WD 500 GB hard drive (number 3) was not recognized. Then I did a reboot and the car has shown once again, HOWEVER, the reader has the read-only flag in DiskPart and disk attrib commands using clear readonly with the right selected disk does not work. DiskPart groaned just could not clear the attribute.

  Any suggestions are welcome & Im ready to try anything. I doubt that it is a driver problem or a hardware problem, such that it worked very well.

  All the tests in Ubuntu 10.04 (my second os) came good and I can write, so Windows 7 has done something, don't know what.

  See you soon,.

  Conor M

  Information system

  ASUS P5N - D
  Intel Pentium 4 3.4 GHz
  2 GB of Ram
  Seagate Barracuda 80 GB IDE [system drive]
  Samsung 80 GB SATA
  WD Caviar Blue 500 GB SATA [the player]

  Right, I stumbled upon a fix! (finally)

  I hope this helps others as it has helped me.

  Open the properties of the drive and goto the tab drivers

  Uninstall the driver

  Restart your PC

  When it starts again, open a session and I must say that the device has been installed successfully.

  Restart again (if windows doesn't tell you)

  Now its works perfectly.

  Thanks for your help Amrita

• Read only the virtual disk?

  Hello-

  I have Vmware Server 2 x86_64 installed on my Hardy Heron Ubuntu 8.04.2 Server x86_64 and it seems to work very well.  I have created a virtual machine for Slackware 12.2 and put the DVD iso, Slackware in the right directory.  The virtual machine starts the DVD fine and I started the Slackware Setup.  However, when I went to set up the hard drive with cfdisk (part of the standard installation process Slackware) I noticed two things:

  1. the drive has been turned ReadOnly, so that I could not score; and

  2. I created a virtual disk of 11 GB, but in cfdisk he only appear only 4.7 GB.

  What I am doing wrong?  Any help would be greatly appreciated.

  Thanks in advance.

  Well, I'm just guessing because I haven't worked on the software you're talking--can be the partition its display corresponds to the DVD player itself as the DVD is normally read-only and the size of the disc is 4.7 GB. .. You can check it out please.

  Points of reward if you find useful response

• Cannot open the hard disk C: and D:, or no matter what follder on them by double-clicking

  After download cannot open the hard disk C: and D: Internet Explorer 9 windows updates or no matter what follder on them by clicking twice and I opened by right clicking and open.  So I have to use him created restore point Internet explorer 9 and return to internet explorer 8 and the previous record and the problem is solved. How I overcome this problem?

  Babis

  This can be a symptom of malware on your system. Take a look at the guides below for advice in conclusion/remove the malware from your system:
  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

  Also: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/my-internet-explorer-has-been-hijacked-by-a-virus/f26f7291-d646-4870-864e-a31976df0011

• I restored a file on a hard disk newly installed using system MS Backup tool and now it is "read only".

  original title: "read only".

  I restored a file on a hard disk newly installed using system MS Backup tool and now it is "read only".  Anyone has a solution.  I use XP Professional sp3.  Thank you.

  Right click on the file > properties > uncheck Read only > apply > OK.

• What is WinWord 8 and what is it? It appeared suddenly in My Documents folder, and it is marked read-only.

  What is WinWord 8 and what is it?  It appeared suddenly in My Documents folder, and it is marked read-only.

  original title: what is WinWord 8

  What is WinWord 8 and what is it?  It appeared suddenly in My Documents folder, and it is marked read-only.

  WinWord8?

  Part of Microsoft Office 97.  Maybe a part of a previous version of Microsoft Works too.

  Delete it if you don't need.

• What impact does when a pdf file is marked read-only

  What impact does when a pdf file is marked read-only

  Try the forum LCD.

• Hello my creative cloud application is empty and showing only white, I can't update or no matter what I tried to re-isntal and nothing and I try too update via photoshop and also said, if I try to update via photoshop I get this Adobe Application Manag

  Hello my creative cloud application is empty and showing only white, I can't update or no matter what I tried to re-isntal and nothing and I'm trying to update also via photoshop and also says, if I try to update via photoshop I get this Adobe Application Manager is required to solve this problem. However, it is missing or damaged. Please download and install a new copy of Application Manager of 'http://www.adobe.com/go/applicationmanager'.  but I also can't help using the application manager

  Follow the procedure below:

  N ° 1)

  Adobe Application Manager trash from Applications > utilities.

  Step 2)

  Click on the link below and download Adobe Application Manager and install the same.

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once the installation is complete, a niche will disappear.

  Then open " Applications" folder and locate the launch of Adobe Application Manager icon and double-click it and update.