disk management, can not put offline to drive (USB)

Similar Questions

• Logical disk management does not recognize a slave drive

  I installed an internal HD as a slave. The BIOS sees the drive, Western Digital Lifeguard sees the drive (it checks OK) with the appropriate drive letter, PMagic sees the drive before starting, but the logical disk manager does not recognize the drive or the drive letter.

  Using Windows XP, SP3 with latest updates

  Hello

  1. The hard drive is recognized in another computer?

  If this isn't the case, then the problem could be the hard drive itself. If he is found, then the problem is in your computer. In this case, run the diskpart.exe utility.

  Use the list partition command and see if the partition is detected. If so, then I suggest you to format the drive in diskpart.

  However, take a return of all data on the hard drive before the format by plugging it into another computer. Help with backup data, see

  Backup: what, how, where

  http://www.Microsoft.com/protect/data/backup/about.aspx

  To use the Diskpart.exe utility, follow these steps:

  1. type diskpartand press ENTER to open the diskpart tool.

  2. type list diskand press ENTER. A list of available hard disks.

  3. type select disk =[n]

  n s Specifies the number of disc the disc to receive the focus.

  4. type list partition

  This command displays the partitions listed in the table to partition on the current drive.
  5. type select partition =[d]

  This command selects the specified partition and gives it the focus.

   d s Specifies the drive letter or mount point path of the partition to receive the focus.

  6. type format drive: / FS: NTFS/Quick

  For more information about commands, see

  A Description of the Diskpart command-line utility

  http://support.Microsoft.com/kb/300415

  Now you should be able to see the slave drive in Solution Explorer.

• Disk Manager does not register E:

  Normally when I insert the disk my camera SD to get a little menu asking what I want to do with these files.  Today, I don't get that. Last time it worked propoerly was two days ago.  It is not a new drive, even if it has been reformatted after the last time that I took the pictures off it.  It is not a new camera.  When I put the disc in the computer [Dell Inspiron 1520, XP SP3] nothing happens.  If I go into my computer, drive E is not listed.  If I look at the Disk Manager (rt - click my computer) the drive E is not listed under storage devices.  Where at - it go?  I want very much to get these pictures from the disc and my computer.

  Thank you

  From your description, I guess that the SD card reader is integrated on your computer. Is this correct?

  • You have another SD card in the Player embedded on this computer? If so, what happens?
  • You have another SD card drive (be it for this computer or on another computer) to enjoy this SD card? If so, what happens?
  • The SD card works OK in your camera (i.e., can see you all the pictures you've taken)?

  It seems that if your card reader is dead.  Open the Device Manager (start > run > devmgmt.msc > OK) and see if there are icons next to one of the notices.  If there is, double-click on the entry and report what appears under the "device status", as well as the camera model name/number.

  As a solution, either connect your camera directly to the computer with the USB cable that should have been provided with the camera or purchase an external SD connected by USB card reader (these are not very expensive).

• I can't windows 98 to connect to the net and I can not install the ethernet driver to install

  I don't know where start the ethernet card I have windows 98 can not install without a driver updated, I can't find a driver that I can towards the down loaded to an open disk and run winzip does not open on a disc and it wont let me install where it is help

  Hello

  Visit the following links to learn more about support for the Windows 98 operating system information.

  http://support.Microsoft.com/ph/1139

  http://www.Microsoft.com/Windows/support/endofsupport.mspx

  http://support.Microsoft.com/GP/lifean18

• Can I put my SATA drive on my PC?

  I have an old HP Pavilion (very old) with 80 GB SATA a1220in. Yes, you think I do with such an old PC, but it is appropriate for my use, as I'm not a hardcore gamer or anything.

  So, what I want to ask is, can I put my hard drive on this PC? It's 80 GB which takes no time to fill up, and yes I can use the external hard drive, but I don't want to attach an external hard drive whenever I start my PC. And added, I want to Dual boot in another operating system.

  Most of the time the drives built for the Protocol SATA II will also work with the controller in the PC in discussion.  It's questionalbe whether SATA III or SATA 6.0 GB drives will be unless they expressly declare that they can be made to work with it.  SATA II or SATA 3.0 GB usually can be changed either with a rider or a software to run on the SATA I controller.  The link you show referencing the SATA I or SATA (serial ATA-150 - what your motherboard calls it) explains the old SATA: SATA revision 1.0 - 1.5 Gbit/s - 150 Mbps

  I suspect only an old SATA revision 1.0-1.5 Gbit/s - 150 MB/s will be hard to find, but a SATA II drive, which can be set with a jumper will work fine. See this page from WD:http://wdc.custhelp.com/app/answers/detail/search/1/a_id/1337/c/130/p/227, 294

  BTW: Find a SATA II WD drive which has the jumper and it will be fine.

• On a start box appears and says can not find.ini:d\driver\chipset\asussetup_hotfix.ini

  My computer starts up fine but when the screen shows Office I get two error boxes that say can not find.ini:d\driver\chipset\asussetup_hotfix.ini

  It seems to be looking for drivers for Asus in my DVD player. All the drivers are installed and everything works. I only stop those two boxes from popping up. Can someone help me with this?

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if it helps.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope this information helps.

• I had an old iMac and had 2 external drives attached to it.  I got a new iMac and now can not plug old external drives were firewire 400

  I had an old iMac and had 2 external drives attached to it.  I got a new iMac and now can not plug old external drives were firewire 400 how can I hook up t he old external hard drives?

  You need a FireWire 400 adapter FireWire 800 and one FireWire 800 adapter Thunderbolt.

  (141473)

• I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?

  I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?

  See:

  • http://KB.mozillazine.org/about:config

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• I deleted the SMART virus, but I can't access my desktop. I have no icons and can not put everything on it.

  I deleted the SMART virus, but I can't access my desktop. I have no icons and can not put everything on it.

  Hello
  To view your files and your icons, download Unhide. Once downloaded, double-click display and let it run. It removes the attribute hidden on all files and try to restore the items on the start menu to their proper location.
  I hope this helps you.
  Brian

• Can not put Windows Media says Server unavailable player security?

  Can not put Windows Media says Server unavailable player security?

  Hello

  You can download Windows Media Play Security Upgrade from the following link.
  
  The security component upgrade
  

• Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

  Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

  Click Start > devices and printers > add a device, make sure that Bluetooth is turned on. For additional help, see the following link:
  http://www.Apple.com/support/iPhone/ http://www.activewin.com http://adacosta.spaces.live.com Andre Da Costa

• why I can not put a wallpaper? I click on set as desktop and the desktop is always black?

  why I can not put a wallpaper?  I click on set as desktop and the desktop is always black?

  Also, if you have Windows 7, check out this Microsoft support article for other causes and troubleshooting ideas.

• Can not install the printer driver that nothing works

  I have a new HP 1102W and brand new emachines running windows 7 and I can not install the printer driver up constantly mistake spent 2 hours on the chat online with an HP technician.

  Try the drivers for the LJ 1100. Use the Add Printer Wizard and choose to install the Windows update driver.

  Tom

• why we can not put windows 7 on our new computers?

  why we can not put windows 7 on our new computers?

  Jay

  You can "downgrade" to win 7 BUT dependent on the Lim, it may void your warranty and there is perhaps no drivers for your computer with windows 7.

  Putting aside the modern splash screen (which you can ignore at startup) win 7 and win 8 are very similar.  If you don't like the modern user interface, you don't need to use it.

  To work around the start right click the taskbar > properties > navigation >

  

• Inspiron 6000 can not see any hard drive.

  Inspiron 6000 can not see any hard drive.

  Readers can be seen and accessed by other machines.

  The BIOS seems to be set correctly, not that there is much that can be done for her.

  Seems that the motherboard is the question.

  Other thoughts?

  ST: FX34091