disk memory and space requirment for development database

Similar Questions

• Trying to remove the folders from Windows one system empty, but in error "is a Windows system folder and is required for Windows work.» It cannot be deleted. »

  My parents bought a laptop from a friend, and recently my father ran an antivirus program that came with multiple files in a folder that has been created by this friend. When you try to delete the folder a box appears that says "it is a Windows system folder and is required for Windows work.» It cannot be deleted. "But all the folders inside are empty and of no use to us. Help?

  The standard answer to questions that begin with «I bought a used computer...» "is you can do a clean install of Windows, because you know not what could be hiding somewhere in the computer.  In this case, it seems as if he is infected with something.

  Legally, the seller was required to give you a way to do this reinstall, but in the vast majority of the private sales of used computers, this requirement is simply ignored.

  If it's a laptop to 'mark' (e.g., Dell, HP, IBM/Lenovo) there may be a hidden partition on the hard drive that can be used to restore the computer to its "fresh from the factory" State.  Of course, this will remove all applications that the previous owner had installed after he or she has bought new, but you should still seriously to consider making such a restore, if the mechanism is available.

  What is the name and the version of the antivirus application that has detected the wrong files?
  What are the names of the files?
  What is the name of the folder that cannot be deleted?
  Are you logged on as a user with the rights "computer administrator" when you try to delete it?

  Assuming that you can not or will not do a clean install of Windows, I suggest the following (do not run scans at the same time, each analysis may take some time, depending on the number of files on the computer):

  Connect as a user with the privileges "computer administrator" and do a full scan with each of the following:

  http://www.eset.com/us/online-scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx (requires download)
  http://www.PCtipp.ch/downloads/Sicherheit/35905/multi_av_scanning_tool.html (page is in German, but the downloaded scanner is in English)

  Also download, install, update and run a scan complete with each of the following:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• Calculate the disk space required for the INDEX

  Hello
  
  How to calculate the disk space required to create an INDEX? Please tell me where I can get the details of resources.
  
  For example:
  I need to create a non-UNIQUE INDEX on the columns, an approximate size would do.
  
  < PRE >
  NOT NULL DATE EVENT_DATE
  APPT_DATE_SLOT VARCHAR2 (15)
  EVENT_STATUS VARCHAR2 (4)
  < / PRE >
  
  The table has some 7 300 000 rows. I would like to know how to calculate too.
  
  All AIDS are very much appreciated.

  A rough estimate of the index space will need is possible by

  adding the actual length expected from each column, plus 6 for the rowid, 2 for the number of the X-header of the rows in the table that will be so an entry

  Date are 7 bytes internal + 15 + 4 + 2 + 6 = 34 X 7.3 M = 248200000 X General fresh for the block header, initrans, etc...

  We will use 20% overhead block or 1.2 X 248200000 = 297840000, which is about 285 M

  The actual distribution will vary according to your method of range tablespace.

  HTH - Mark D Powell.

• Dmgtd LMS 4.2 and HUGE memory and processor requirements

  Hi guys,.

  our stop for LMS server running after crash :/

  I am trying to run the service manually:

  net start cmrdmgtd

  but it's only the error display:

  "The service not responding to the control function".

  Active syslog.log and dmgtd found the warning messages that are probably responsible for preventing the process to start.

  23 jan 05:33:57 127.0.0.1 dmgtd: WARNING: memory (RAM) system is less than the required memory, which can affect performance

  23 jan 05:33:57 127.0.0.1 dmgtd: space RAM required is 1 969 432 130 M and space system RAM 16384 M

  23 jan 05:33:57 127.0.0.1 dmgtd: WARNING: memory the system SWAP is less to required Swap memory, which can affect performance

  23 jan 05:33:57 127.0.0.1 dmgtd: SWAP space required is 2130 567 168 M and system SWAP space is 32768 M

  23 jan 05:33:57 127.0.0.1 dmgtd: WARNING: the processor speed is lower at recommended

  23 jan 05:33:57 127.0.0.1 dmgtd: the recommended processor speed is 1 398 035 032 ~ MHz and CPU system speed is 2900 ~ MHz

  I have no supercomputer on-site to meet these requirements

  System Specs:

  Windows 2008 R2 64 b

  installed on the virtual machine

  RAM: 16 GB of RAM

  Processor: Xeon X 567 2, 9 GHz

  Is there a way to convince dmgtd to offer lower, real life requirements?

  What causes these high values of RAM and CPU?

  Hello

  This time, it will work.

  You md.properties is corrupt.  I enclose one of my server. You must make the following changes to the file.

  PX_HOST = ns - pup > your hostname serevr

  PX_FQDN = ns - pup.cisco.com > FQDN, if there are

  NMSROOT = C: / PROGRA ~ 2/CSCOpx > change the NMSROOT complete file according to your installation.

  After replacing the file... Restart the server

  Thank you-

  Alya

• Attempt to determine the space required for the migration of the opening...

  Hello:

  I'll put together a plan to migrate from Aperture to Lightroom.  My research is coming short on a particular issue... If I use Adobe plug-in to convert, if it changes the file system existing opening, thus converting the Lightroom folder structure?  Or, is, in essence, "duplicate" files by creating a new set for Lightroom and leaving the intact existing opening?

  If it gives all existing files, I'm fine.  If it is redundant with, I have to approach differently - since my opening set is about 400 GB, and I have about 100GB left on my drive.

  I've almost worn out G for Google tries to find an answer.  Your help is appreciated.

  Thank you!

  PS I posted this on the General discussion of Lightroom, but I have received no feedback.

  The migration tool calculates the space required before continuing. It really depends on if your Aperture library is managed or referenced. In the case of a managed library, your images will be get duplicated in order to protect the opening of corruption. See this link for more information:

  http://www.lightroomqueen.com/ready-move-aperture-iPhoto/

• Using the baseline grid and 'space after' for formatting

  I use InDesign CC on a MacBook Pro of the retina. I'm designing a document and you want to use a reference grid to align the text. I would like also to use the option "space after" in the definition of a paragraph style. I use the type of 10 points on the line spacing by 15 points. "Space after" is defined as 7.5 points.

  If I try to apply both database grid orientation and the specification of "space after", I basically lose my pt 7.5 defined "space after" a lot more space because the wells of the first line of the following paragraph to the reference grid line below. I find myself essentially with 22.5 pt instead of 7.5 pt.

  These two incompatible functions or y at - there a way around that I don't know?

  Thanks for any advice.

  There is no way around it. Best is to calculate your different leading.

  space before and space after values so that everything falls on a

  base line. In this way you avoid having to rely on "Align on the baseline." You

  can also turn on "skip dragging ' in Preferences > Composition if

  you have graphics with dressing in them.

• I forgot the password for Windows 7 laptop and password required for all downloads

  No disc reset was created before there is another established user except the guest account, but even with the admin, a user lost password password rights is required for all downloads and updates. Cannot download even a password cracker because it requires a password to complete all downloads. What can I do? It's very frustrating.

  The legal option only when you do not know the password is to copy your files, you have all to CD or another drive for backup, then clear the computer and reinstall Windows.

• BIOS and drivers required for CQ45-106AU for OS Windows XP or Free DOS

  Hello, I bought laptop Compaq CQ45-106AU which has Windows Vista Home Basic OS and I am unable to find the BIOS of motherboard, Chipset drivers and all drivers for this perticular computer laptop, I want this downgrade to Windows XP Pro or I want to to Free DOS so if anyone has the solution to this then please send me information as soon as possible. Thanks in advance to all who pass by this message.

  I recommend you stay with VISTA.

  This chip Audio IDT using model and ENE CIR receiver driver XP were hard to find.

  ENE CIR is essential if you have purchased the remote for this model.

  Some of the user CQ45 found they will lose control of BRIGHTNESS setting (Fn + F7 and F8) due to the incompatibility of the QLB software.

  However, if XP is essential for your applications please perform steps below.

  ____

  Your model must sata driver AMD sliptreamed on XP installation CD.

  If you did it right, you'll BSOD error.

  Use Nlite to slipstream sata driver AMD.
  A good guide for driver sata sliptream, here

  Note: Do NOT use this guide sata driver, your sata driver is given below.

  AMD SATA AHCI Controller Pilot, here

  or

  If you want an AMD SATA driver from HP site, here

  extract sp39719 to a folder and use the files in the RAID7xx folder

  Note:

  Select ONLY x 86 AMD SATA AHCI driver

  Download nLite , here

  Make your Vista recovery cd/DVDs if you have not yet discovered it here

  _____

  Try the following drivers,

  Drivers XP for CQ45-106AU

  Install .net Framework before the others, here

  Suite software Catalyst (for your Chipset ATI, HD 3200 Graphics/video and LAN drivers here

  Audio installation is the most difficult part, since the BIOS incompatibility.

  Install MS-SAU first, here

  IDT High-Definition Audio CODEC Pilot,

  a version update of Microsoft Update Catalog here

  or

  or if you want to install HP IDT driver (VISTA), here , some user indicated that it also works with XP

  or try the new version here

  Note:

  Some users CQ40 CQ45 must update their BIOS to fix Audio that disappeared after rebort.

  If you have found your BIOS is lower than F33A, update your BIOS to the latest version here

  High-Definition Audio (HDA) Modem Install drivers, here

  Broadcom Wireless, here

  Realtek RTL8102E Family PCI - E Fast Ethernet NIC, here

  JMB38X card reader Host controller driver, here

  ENE CIR Receiver (your Vista driver), here

  or if it doesn't work try Vista driver checked Intel, here

  HDMI Audio, here

  ALPS Touchpad Pilot, here

  HP Quick Launch buttons, here

  If you have Bluetooth, here

  If you had for 7 unknown devices (buttons drivers), here

  Installation-> right click machine.inf, choose install.

  Good luck

  Message edited by Mariza on 04/01/2009 12:11 AM

• Disk space required for the restructuring of the DB

  Hi all
  
  Running Essbase 11.1.2.1
  
  Sought a definitive answer to this and can't seem to find one, hoping that someone here can provide some clarification.
  
  
  For the sake of arguments, if I wanted to make a '' RESTRUCTURING '' through the Regional service for a 50 GB database, how much free space will have to complete successfully?
  
  A. probably simplified view (assuming the data must land on ora-ess01, have a few "Fireworks" and then go back to the DB), I imagine that something around 150% the size of the file would be sufficient, so about 75 GB free.
  
  We are being advised by our consultants to have 250%, which would mean 125 GB... im assuming they are correct, because they know much more than we mere mortals (me), but if someone could shed some light on this it would be appreciated.
  
  Thank you
  
  JB

  You don't mention if it's ASO or OSB. I'll assume BSO. That, to at least the size of your .pag, .ind, .otl, .esm combined files as it makes copies of all these. a little more would be food. Of course that would be the minimum and if a single database gets restructured and allow growth of DB.

  With ASO, you need more space because it creates a copy in the temp directory for as well as the .dat file and so I heard the recommendation of 2 times your dat file, but I think you could get away with less.

  I don't know what other factors are your consultant is taken into account I don't know your environment.

  I should mention that it's for a simple restructuring, if restructuring is done by exporting the data, delete the DB and reloading, then much more disk is necessary because data would not be compressed on the disk in the export.

  Published by: GlennS_3 on January 23, 2012 07:45

• Space required for backup to disk more files

  How can I increase the space in my Recovery(D:) parce que je veux sauvegarder plus de fichiers.) I get the message disk space insufficient, even after a cleanup is performed.

  I free 173KO in my OS (c :)) can I transfer some of it to (D), who has only 9.99 KB.
  Thank you very much

  The recovery was put there by your OEM for the recovery of a factory default state.

  Buy an external USB disk for backup on.  Backup to the same disk hard physics is not a backup, if the hard drive dies, you lose your original and all backups.

• 127 GB of disk space required for Windows XP?

  I use the copy of XP comes with my computer 10 years ago.  I upgraded to SP 3.  XP is now 127 GB of my 142 GB disck drive.  I think it should be less than 70 GB.  How can I reduce the space occupied by Windows?

  Thank you!

  The brief flash was probably because you run msizap by double-clicking to open a command prompt window instead and it works there.

  This is probably the best at this time for you to take the computer to a local store.  I suggest does not go to a place geeksquad or type BigBoxStoreUSA, but you probably right that who take you to reinstall Windows.  Don't forget to tell them to back up your data files (photos, documents, music, etc.) first.

  Unless the Office was preinstalled on the computer when you bought it (and the store chooses to use the method of 'back to the conditions of the factory'), you must reinstall Office.  You also need to reinstall other applications that are now on the computer.  You need original installation media and product keys.  Ask the shop to extract the product keys for your various applications before reinstalling Windows.

  Good luck.

• Space required for Vista SP1 and SP2?

  Hello

  I have an old Windows Vista Basic Home Edition machine, I bought in 2006. I have not installed upgrades to SP1 and SP2 again, but I want to get them now. Drive C, where Vista is installed, has only 3 GB of space left free. Could someone please guide me if I should proceed with the upgrade or have more space? How much space would take these updates?

  Thanks in advance.

  Concerning

  
  

  Hello

  I have an old Windows Vista Basic Home Edition machine, I bought in 2006. I have not installed upgrades to SP1 and SP2 again, but I want to get them now. Drive C, where Vista is installed, has only 3 GB of space left free. Could someone please guide me if I should proceed with the upgrade or have more space? How much space would take these updates?

  Thanks in advance.

  Concerning

  
  

  Hey HKansal

  you really need to buy a bigger hard drive

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Make sure you have enough disk space to install SP1 (even though much of that space will be recovered after the installation). If you need a free space on the disk, go to onlinestrategies to free disk space .

  Windows Update	based on the x 86: 1 200 MB based on the 64: 1 500 MB x
  Download SP1 from the Microsoft Web site	based on the x 86: 2 500 MB to 5 450 MB x 64-based: 4 100 MB to 7 850 MB

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Make sure you have enough disk space to install SP2 (though much of that space will be recovered after the installation). If you need a free space on the disk, go to onlinestrategies to free disk space .

  Windows Update	based on the x 86: 684 MB based on the x 64: 863 MB
  Download SP2 from the Microsoft Web site	based on the x 86: 1.8 GB to 3 GB based on the x 64: 3.2 GB to 5 GB

  Walter, the time zone traveller

• Storage space required for installation of the ODI Prod

  Hello
  
  We install ODI in Linux and the customer server in the Windows machine. How much is the space allocation of memory recommended Linux server and Wimdows for the customer?
  
  Thanks for your time and your help.

  According to http://bidevata.wordpress.com/2012/04/27/installation-of-odi-11-1-1-6-on-windows-64-bit/:

  Disk space: 5GB or more
  Available memory: 2 GB or more

• online shopping application site using fusion web application and permits required for delivery?

  Hello

  I will develop a shopping site online for a supermarket based on customer's request.

  My site would need to be established with images of objects on different perspectives, filters to sort the required items and online purchase demand operations too. (Similar to the site like ebay, flipkart).

  For that kind of requirement, it will be possible to develop using FUSION WEB APPLICATION without restrictions?

  If possible, do I need to have a LICENSE for the delivery of the application or project to my customer?

  Kindly give your valuable suggestions.

  -TechniM

  It is up to you to decide if the functionality offered by ADF Essentials is good enough for your needs or you need some things that adds the complete ADF (for example, the control data for the Web or Mobile ADF service).

  You can embed other solutions for ADF Essentials application security, so that your application can still be fixed. (example - http://andrejusb.blogspot.co.at/2012/10/adf-essentials-security-implementation.html )

  With regard to accommodation - do a google search for Glassfish server price list. Remember that you will probably need to take into account the load on your application to decide what type of server configuration, you will need.

  The extent of support - you can buy support for Oracle Oracle ADF - check Oracle price list for more details.

• Space required for updates

  Hello

  I installed ESXi 4.0 on a 2 GB flash card on HP G6 with settings by default and you want to know how can I check how much space is left on the map of flash memory for esxi updates before updating?

  Thank you!

  Enable access SSH (http://www.yellow-bricks.com/2008/08/10/howto-esxi-and-ssh/)

  You can use:

  fdisk-l (to see the partitions)

  VDF h (to see the use of partitions)

  André