disk of 120 GB mSata has added to my Envy 14 K027cl - NEED help

I have installed an mSata drive to complete my 750 GB hard drive.  The BIOS it recognized under the UEFI.  I started on my key USB 8.1 and started the installation process.  I deleted all partitions and then chose the drive for the installation of WIn 8.1 mSata.  It installed fine.  However, when it restarts, it said "no found bone."

Any suggestions

Yes, you can do that unless you remove the original drive. Try it: the system boots to the mSATA in the absence of the SATA drive. But the BIOS will always prefer the SATA drive and the boot sequence will not look past as a SATA drive is installed. The only solution is to install a bootstrapper on the original SATA drive that points to the mSATA finished to start.

If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Tags: Notebooks

Similar Questions

  • Trojan Spyware has control of my computer and I need help!

    I get this error message on the connection to the internet.

    "Windows cannot connect to the Internet using HTTP, HTTPS or FTP.  This is probably caused by the settings of firewall on this computer. »

    I think I have a spyware Trojan.  I was trying to download "malwarebytes" to remove it.  I have Avast and Windows Defender and neither one of those who he'll come.

    Help, please!

    I forgot to add that he charged an icon in my toolbar lower HR as "Antivirus Live"

    Tim

    Hello

    Antivirus Live is a fake antivirus, a scam to force you to pay for it, while it has no advantage at all.

    Remove Antivirus Live (uninstall Guide)
    http://www.bleepingcomputer.com/virus-removal/remove-antivirus-live

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN

    Revo Uninstaller - free
    http://www.revouninstaller.com/revo_uninstaller_free_download.html

    It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
    the Windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
    a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Menu has changed, the scans disappeared... need help!

    Since this morning, something changed with my ability to access to the & use my scanner on my printer function. I have the series of J611 3050 has and used the night to print and scan last and everything works great. But when I tried to analyze something earlier, nothing is beautiful.

    It used to be (not later than last night) when I clicked on the icon for HP desket a menu would open enabled me to choose what I wanted to accomplish. Now, when I click on this icon is "printer assistant" for which nothing happens when I click it I don't see, 'See what's printing' "set preferences" and 'customize your printer', which none have no bearing on this issue that I can find.

    It used to be (not later than yesterday) that when I scanned it something a window open which allowed me to make a few changes to analysis before you save it.  It was all the scans have been automatically saved in a specific file of my choice. This window opens now is no longer, and sweeping turns to in limbo where I can't find it.

    Can someone PLEASE help me understand what happened and how do I go back to the way things were?

    Thanks in advance!

    Remy

    The solution I found to this problem is to uninstall the printer and reinstall using the latest drivers. HP released a new package of drivers for this printer and all printers that use a similar software, which corrects this problem.

    HP Deskjet full feature software and drivers

  • Adding new music / artist &amp; retrieval album - need help?

    I have a bunch of DVD I ripped in my library via Windows Media Player - and it is all sorted by album & singer.  It was pretty cut and dry.

    Now I'm moving some of the mp3 files I transferred audio cassette to a mp3 file on my computer and trying to Wade my way through there.

    * I don't know how to get my Windows Media Player v11 to import those tracks in my library.

    Order to get around this - opened my computer and dragged and dropped into my music on the "rocket" file.

    * I can turn on my rocket and listen to the mp3 file, newly added via the "recently added" part of my player - but there is no artist or album folder that I can easily navigate to these audio tracks in the future?

    I guess if I can get these mp3 files in my library - I can tag it and he classify in my player. How should I do for this - OR - are there - it another way to get these mp3 files that are already on my rocket to be categorized without Windows Media Player

    Thank you

    niko_sama wrote:

    Try adding an ID3 tag for each mp3 file with a utility program like mp3tag http://www.mp3tag.de/en/ (this is the one I use, but there are many other programs that will accomplish this.), and then import them into WMPv11.  Or copy them manually to the "rocket".

    Message edited by niko_sama on 01/22/2009 18:34

    Thank you

    I already had the mp3 tracks saved on my hard drive of the PC.  I just was using the app mp3tag to mark each mp3 file.  I then disabled my Fuze of files not marked - and then by drag and drop the folder newly added on my rocket of the "my computer" screen reader

    Now, everything works like a charm.

  • my media center of windows has stopped playing tv and movies online need help fixing it

    my media center of windows has stopped playing any content online a month ago, I have to reach the point of signing in my sky ID and can press the play button but on all the videos I continues to redirect to "navigation to the webpage was canceled" by giving these potential problems :

    not connected to the internet, the Web page is encountering problems and typing error,

    my excellent internet connection and that it is a hyperlink to the login page, it cannot be a typo on my side. and to my knowledge, there has been no update for my computer that would change how the program works, if anyone can help get this sort would be great

    Type system in the start - menu, help and Support, restore and then see if you can restore
    up before it happens.
     
    --
    ..
    --
    "lauracrew" wrote in message news: fe37f7c7-62bb-469f-ab51-54eea01f2f32...
    > my media center of windows has stopped playing any content online about a month
    > there is, I can get to the point of signing in my sky ID and can press on the
    > play but button on each video I keep to redirect to "navigation to.
    ' > the webpage was canceled "by giving these potential problems:
    >
    > not connected to the internet, the Web page is encountering problems and typing
    > error,.
    >
    > my internet connection as it is a hyperlink to the signal and excellent in
    > page cannot be a typo on my side. and to my knowledge there is no
    > was no update for my computer that would upset the functioning of the
    > program if anyone can help get this sort would be great
    >
    >
    >
    >
    >
     
     
  • My computer has some kind of problem. I need help ASAP!

    OK so recently I played this game called Saga lost on my computer. So I connect my Facebook for the game, however, one day I started to log in to my facebook account and log into the game with her, but then he says "lsfblogin has stopped working a problem caused the program blocking works.» Please close the program. "How can I solve this it allows to connect to the game with my facebook account. I'll give you a screenshot of it. Thanks in advance for the help.

    You should talk to the game developer (s) and Facebook. This does not sound like a Windows 7 problem...

  • Added a Zoom Plugin jQuery and needing help to add attributes to the evolution of the poplet images.

    Hey BC community, I looking for a little help with some jQuery / javascript. Overall, I have a plugin to zoom like forcing me to add a data attribute to the image I want to add the zoom effect on. This isn't a problem, but I poplet images that I've adjusted to fill again the big picture. html() rather than the default light box.  The Zoom plugin I use requires a data attribute to be added to all the images I want to have the ability to zoom attached to. I wrote jQuery that adds the attribute data on the original image which is to fill the big image container, but whenever I change the following poplet image, I lose the zoom effect. I hope that makes sense... lol I'm still a javascript / jquery newby.

    Here is the work currently underway. Figure which may help understand the situation better. Here is the site

    I just want to add zoom to any poplet effect is enabled by adding the attribute data and the new file extension required for the expansion of the resolution. Again, please excuse the bad jQuery / javascript, I'm still learning!

    Here's my jQuery / Javascript.

    New features of Poplet

    /*===================================================*/

    function poplet (e) {}

    e.preventDefault ();

    var imgURL = $(this) .attr ('href');

    $('#largeimage').html ("< img src ="' + imgURL + ' "> '");

    }

    /*=======================================

    MAGNIFY

    =======================================*/

    $(document) .ready (function () {}

    var addedAttr = "data-magnify-src";

    var addedExtension = '-large.jpg ";

    var originalExtension is $('.productLarge #largeimage > img') .attr ('src').slice(0,-4);.

    var combinedExtension = originalExtension + addedExtension;

    $('.productLarge_#largeimage_>_img').attr (addedAttr, combinedExtension);

    });

    $(function() {})

    Poplets

    $('.productPopletsItem_a').removeAttr ('onclick release);

    $('body').on (' click on ', '.productPopletsItem a', poplet);

    });

    Yes I fixed it, got help from some other forums. Thank you!

  • My disk of Windows XP Professional has a crack in it and will not install or reinstall.

    My disk of Windows XP Professional has a crack in it and will not install or reinstall. The product key is: [removed]. I don't know who to contact for replacement.

    How to replace the lack of Microsoft software

    Carey Frisch

  • Creating a project in my portfolio of adobe and it has added to my site of behance so don't want that? What should I do to stop this?

    Creating a project in my portfolio of adobe and it has added to my site of behance so don't want that? What should I do to stop this?

    Hey there!

    Behance and Adobe portfolio work together for your projects of synchronization from one to the other.

    There is no way to "unsync" Behance and portfolio, however, there is a solution!

    • Clone the project you're working on Behance
    • Disable (using the toggle button) the project "synchronized" portfolio and not sync cloned the new project which has been cloned on Behance
  • SoftwareONE India Private Ltd. has added 1 licenses to your Adobe Creative Cloud account. Please contact your account manager to complete the purchase process or answer additional questions.

    Hello

    Hi Kunal,

    Seems that your dealer has added a license on behalf of your team.

    Please contact the dealer or administrator of the team for the same thing.

    Kind regards

    Sheena

  • Dreamweaver has added thousands of white lines to my code - also

    The discussion titled ".

    Dreamweaver has added thousands of white lines to my code.

    is locked for a reason.

    However, the bug is real, is dreamweavers, and while I don't have a fix, there is a solution.

    The error occurs when you play a file via ftp IN dreamweaver. Go through another ftp program product of correct results.

    Sometimes fetching dramweaver cs4 on windows 7, with the code CR LF (Windows) format.

    A SOLUTION, not a solution, is to set line break format toLF (Unix), which works for almost all windows except Notepad programs.

    A SOLUTION would be an option to make the transfer of binary for all types of files. In fact, this should be the default value.

    It is triggered (not caused) by modifying the remote system OR by editing under Windows and copy in binary mode to the remote system.

    In this case, Dreamweaver inserts a crlf for each cr and for every PMQs, doubling the crlf, certainly a bug.

    ===============

    Having said the above, I offer this. After the software for decades, I have been on both sides of the frustration offered by the original discussion.

    Not being is not able to reproduce the problem is frustrating, but an inappropriate response from a company to a bug report is "who did not.

    In this case, a minimum of logic suggests line ends will have been doubled, and one bug There fix is quite easy. Not be able to reproduce

    would be fairly easily replaced by having a look at the code.

    While the discussion devolved to inappropriate reactions on BOTH sides, it is understandable for me why someone says that the bug they

    encountered didn't happen would become angry, and Adobe could use this discussion as a training exercise for its employees, to problem solve

    more productive to happen means for dialog boxes. "who did not", it is quite probably the most exasperating possible answer.

    failure to have this bug fixed damage Adobe more than it hurts the person who reported it. A quick google will display hundreds

    people have been affected by this bug and in general for anyone who publishes, a hundred others read it. Calculations suggest this trivial bug

    impact on a large number of users, and thus impacted reputation for quality and customer service. Adobe wants 10,000 disgruntled customers?

    I hope it's clear that I'm trying to offer constructive comments. Best regards to all.

    Earth to...

    I'm sorry.

    Irrelevant. There is no excuse for dreamweaver for not doing a ftp transfer correct when other ftp programs have no problem to do so.

    That is why it is a bug. Program Adobe corrupts files during the transfer of file in that no other program ftp corrupts never under any circumstances.

    That said, I did 3 + decades, I know how to set parameters.

    I also know that this is not the correct answer to "your program added thousands of white lines to my folder.

    "It's not a bug - this is the intended behavior."

  • I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.

    I need help, find how to install Windows Vista on a HP Pavilion 6475z disk.   I had to replace the hard drive, so he has nothing about it and I added more ram, but I replace the cd player so it is not yet installed on the HP.   So I was wondering if I could put the installation disc in my laptop cd/dvd and connect computers by usb ports and install it this way and if not how can I?

    Thank you

    Hello

    You are welcome

    If the CD/DVD drive in the works of PC Gateway, you can (at least temporarily) remove it and install it in the HP, you can run your recovery disc and reinstall Vista.  Once everything is running on the HP, you can always remove the CD/DVD drive and reinstall it in the gateway PC if you wish.

    Kind regards

    DP - K

  • Need help with replacement disk on port 0 in Raid1 desktop machine

    I have a HPE 380 t. I have has a RAID1 (mirror) with 2-500 GB Western Digital. When I boot it says the raid has deteriorated and an error has occurred on the player connected to port 0, port 1 player shows ok. It's in the Manager of the Intel Matrix Storage Manager, (Ctrl + I on startup). The machine starts again, but I want to replace the drive on Port 0 with another disk of 500 GB.

    How can I go on that so I don't toast all data on the drive Port1?

    I searched links and other places for help on this but nothing helps! Is there a tutorial or step by step instructions somewhere that I can go?

    Thanks in advance

    Hi Mike,.

    Lucky for you that you are using non-RAID 0 and RAID 1 or your table would probably unusable.

    You can determine the status of your RAID configuration using the Intel Rapid Storage Technology (IRST) software.  If you do not have this software on your PC, then you can Download IRST from the Intel web site.  I recommend that you use the latest version available from Intel.  General information can be obtained from the TSRI User Guide.  When you launch TSRI, help topics are an excellent source of information.  You can access TSRI by going to the control panel and select Intel Rapid Storage Technology. You can also access TSRI from low location of the taskbar.  TSRI should resemble a hard disk icon and it normally has a green check mark.  By default, TSRI is defined as delayed start, so don't expect to see active immediately.

    1. Launch the IRST while under Windows
    2. Click Help
    3. Click on troubleshooting
    4. Click on gradient volumes and follow the recommendations. Scroll to RAID 1.
  • AY747AA: I need help my pc has 1 short beep, 1 long beep

    Hi there I seriously need help you guys with my model # P6310Y.

    I constantly hear 1 short beep and 1 beep long when I try to start my PC. According to hp, it's a memory problem, but I proved it wrong.

    I went to remove the RAM check if one of the modules is bad.they are all good 2 GB x 3.

    I also removed the disk hard windows 7 and I still get the beeps that I described above. I made sure that all the cables are correctly seated and I cleaned the MOBO set for dust, including the CPU.

    I get a white one on my screen nothing shown.

    When I plug the keyboard I get no power, lights (NumLock, CapsLock) etc.

    The mouse is powered.

    I replaced the power supply always get the beeps and I can remove it all cables, hd, mouse, KB and the beeps continue.

    Please help me guys that I have reached a dead end and I thank you for your time,

    Sincerely,

    tech1126

    Quote from Wikipedia:

    S/PDIF (Sony/Philips Digital Interface Format) is a type of digital audio interconnection, used in audio devices to the audio output over relatively short distances.

    In any case, it's time to "responsibly recycle" this motherboard and get a new one.

    You traded all that was possible exchange, without solving the problem.

    Pull on all small riders off the coast of the old MOBO and then save them.  They might be useful.

    Try to find a MOBO from the same manufacturer with the same type of CPU (Intel processor) or AMD in AMD.

    That increases the chances of (stored on the current hard disk) Windows being able to reconfigure itself to adapt to the new hardware configuration.  This "correspondent" also helps to position all the external (USB, Ethernet) audio connectors on the new MOBO to physically enter your current case.

  • We have made a purchase of the gems on the Cammand of Star Wars app.  Although us have been billed double and no has not yet obtained the gems.  Please help.

    We have made a purchase of the gems on the Cammand of Star Wars app.  Although us have been billed double and no has not yet obtained the gems.  Please help.

    Contact iTunes supports http://www.apple.com/emea/support/itunes/contact.html for assistance.

Maybe you are looking for

  • Activation button engaged without being invited

    The Activation lock on my iPad mini was involved even though I do not prompt to help hence is my camera. Somebody hacked my account?

  • HP ENVY M7-N109DX: IF MODE 'SLEEP'?

    How can I tell if my computer sleeps o justr, display is off visually? I think that the answer could be that the power light flashes when the computer is in sleep. Holly

  • Satellite A10 - does not start correctly

    I have a Satellite A10 and I can't start even last known good configuration or in safe mode does not work and if it starts it will take much time but a blue screen appears and indicates that an error has occurred and prevent any damage on the hard di

  • Network printer

    I have a printer 1522nf MF that is connected with a cable to a PC HP Windows 7. A router is also connected to the PC. I'm trying to get my laptop to print over my home network, but the printer does not appear on my laptop.  The printer is a network p

  • HP computer mini Compass: password help

    I need password for CNU01403K8