Diskeeper is leaving "inefficient" system of files scattered in my drive.

Similar Questions

• Satellite L300-11V - system registry file is missing or damaged

  Need help, I have a laptop Toshiba Satellite L300D-11V, which, when turned on gives the message that the system registry file is missing or damaged.

  My problem is that when the first installation program, I did not back up files of recovery on DVD in the event of such problems like this, my questions are, is there any way around this without the recovery disk to reinstall Vista from hardrive?

  I can't find a way to do this or Toshiba will provide a recovery disk or a software download (for free or to buy) and it is the only option that is available to solve my problem?

  The laptop is still under warranty for another 11 months am I covered for the hardware/software in this situation he has taken over the shop I bought that they said they couldn't do anything without the recovery disk.

  Help, thanks in advance.

  Hello!

  You can reinstall Vista without the recovery disks. If want to repair your computer by restoring it to the original factory State, you can do so directly from the hard disk (press F8 when you start your computer, choose "Repair your computer"
  "and follow the instructions in the menu).

  Normally you had recommended to burn the recovery disk when you first start. There is a reminder that pop ups from time to time to burn the disc.
  Toshiba does not provide a software download, it is all preinstalled on your laptop.

  After the reinstallation, please create the recovery disk. If you need it and didn't burn this, you have to pay.

  Good bye

• Add 9188 Chassis to the system definition file (sdf)

  I want to measure the basic in Veristand 2011 without a custom device channels.  In the system definition file, how can I add a 9188 chassis? And how do I add a thermocouple on channel 0 on a series c 9213 module?  Thank you!

  Hello

  You work with a Windows or device in real time?

  If you use VeriStand able to work with a Windows-based system, the addition of a cDAQ-9188 should not be a problem; the equipment Discovery Wizard he will come if it's in the same network as the Windows computer. Having problems with this?

  If you have a real-time like a Pharlap ETS PXI controller running target, you will not be able to use the cDAQ-9188 at all because it is not supported in real-time operating systems. If you work with a target in real time and you need the CompactDAQ you either move to Windows or we a USB CompactDAQ instead, like a cDAQ-9178.

  Please refer to this topic. The second post made by a Product Support Engineer and I was able to confirm that the information is still valid even for the latest versions of NOR-DAQmx and VeriStand. You can also check the compatibility in real-time in the Readme of NOR-DAQmx 15.5.

  Kind regards

• VeriStand system definition file

  Greetings! I'm trying to customize the sysytem Veristand definition file. In the definition file system when adding simulation models, we have an absolute path to the dll. Is there a way by which I can change to accept the absolute paths. Also, I want to know is there any VI in the background (runtime) during execution of the screen to add the simulation model? If yes where he resides.

  If I look in the XML of the system definition file, which shows an absolute path to templates

  Property Name = "Path of the DLL" >
           

  Can I change this? How can I implement a relative path here?

  You always specify the absolute path to the model in this configuration dialog box. However, when you save the system definition, if the path of the DLL model is compared to any known location (the system definition file, the public documents folder, etc.), it will be saved in the system compared to those places definition file.

• If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files?

  If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files? drive C whereas the partition that has the operating system and drive D is the lenovo drive that has all the drivers lenovo and all those. Did I lose my files?

  Yes, the collection clears all of the C drive and you will lose your files. The solution would be to backup regularly to an external HARD drive and after the key one to also restore the files from the external hard drive.

  This has been answered before, if you do a search for "key recovery" it appears among the first results.

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/will-i-lose-my-files-if-i-do-one-key-recove...

• What is the nucleus of a file system for any operating system or file system - at the heart of any os?

  Hello

  What is the nucleus of a file system for any operating system or file system - at the heart of any os? Thank you, BS

  Original title: file system - at the heart of any system

  Hello

  Use Bing or Google to find your answers.

  Here's a little info:

  File system
  http://en.Wikipedia.org/wiki/File_system

  Category: Computer file system
  http://en.Wikipedia.org/wiki/category:Computer_file_systems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Start Up System 32 file support?

  When I start my computer and connect under my name it takes a long time to load, I have disabled all programs start and here is the best, when the office arrives, my 32 file system is open? What can I do to stop this, my wife logs in as his name and it comes right up without the darn open System 32 file?

  Change a registry Run key, here http://support.microsoft.com/default.aspx?scid=kb;en-us;170086

  You can also download a script here http://www.kellys-korner-xp.com/xp_tweaks.htm read the beginning article and then scroll down to the 260 item in the right pane.

• Error message saying signature not valid fatal error, System log files are missing or damaged 426 error when I try to install Windows XP.

  I get an error message that I need help to solve

  I need help making past error fatal error of invalid signature, the system log files are missing or damaged 426 error when I try to install windows xp pro on the new hard drive I upgraded too.  He was the original operating sysytem who accompanies him.  I use an installation cd from microsoft windows xp with service pack 3.  Whenever I get the same message and it wasn't to restart with the cd and it install all over again, can you help me please?

  Well, you need to format the hd before xp can be loaded onto a new drive...

  If it's a microsoft retail xp cd, installation cd, boot the pc on a cd, to the xp cd menu, select install xp,.

  Okay, choose the option to format before xp begins to install, the rest is automatic. In addition, do

  of course, the old hd is unplugged, plug once xp installed, disconnect printers, etc...

• repair Windows XP file system, some files lost

  How to restore my version of XP?
  repair Windows XP file system, lost files, and the sound card does not even if the drivers are installed. Themes are absent and some programs don't is not loading, connection WI - FI will not charge. System Restore does not work.

  tonythesiskolee,
  I would like to get some clarification.  When you say 'repair Windows XP' what talking you?  Did you run the System File Checker or that you are trying to make a repair to a XP disk installation?  You get an error when you try to run the system restore?

  There are two ways to restore your system.  If you have set up and run a backup utility, it would be the best way to restore.  Or you can reinstall XP.  This article covers the different installation options available.  Or if you have an OEM drive or restore partition, you can then follow the instructions to do a factory restore. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• Windows not boot system registry file is missing, damaged

  The message I get is "the system registry file is missing, damaged" I have the restore option, to start in SafeMode etc but nothing works, it always brings back me to the same screen. I did a check on the hard drive and he said that there is an error.  What can I do? I don't have a vista cd. Thanks for any advice.

  What is your computer brand and model?

  What virus protection software is installed on your computer.

  Can you please post a full error message complete.

  A likely scenario is that you need to restore factory settings, which is a shredder process removing all data files and programs added since the computer was purchased. If you want to recover your data files, this should be done before you try to fix your computer.

  To recover your data files, you need a second computer to access the drive to read and copy the files to the second computer and on removable media for resettlement on the first computer after repair. There are two ways to retrieve data. Method 1 is to place the first computer's hard drive in a USB external hard drive enclosure to connect the case to the second computer. Method 2 is to remove the hard drive from the original computer and place it in a spare drive Bay and connect as a second hard drive. For method 2 be a viable option the two computers must be either computers desktop or laptops as desktop computers have 3.5 "internal hard drives and internal laptop drives 2.5" computers. For method 1, you simply purchase the appropriate forum for the drive.

  There is no guarantee that you will be able to recover the data, but you can usually if you have a damaged on a viable hard disk operating system. In some cases, you don't have to resort to the company a restore to the factory settings, but most of these options depend on having a system CD. Walter is indicating that there may be ways to acquire a CD but you need to the right one for your computer.

  The process of reconstruction of a computer system can be a difficult task, for the first time, it is committed. You must decide if you want to do or if you feel more comfortable taking the computer to a small computer repair shop

• On HP Pavilion laptop computer on Vista do "Windows failed to load because the system registry file is missing or damaged."

  I have a HP Pavilion laptop and I got this error message "windows does not have load because the system registry file is missing or damaged.  then he said that I could insert the windows installation disc, I did not.  Thank you.

  Original title: a registry file

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't work, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the above does not solve your problem, it's the Information from HP to solve problems with their computers, including the reinstallation of the operating system by pressing F11 at startup.

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703#MicrosoftRestore

  For the HP Recovery Manager.

  The backup and HP Recovery Manager on HP Pavilion and Compaq Presario computers is a versatile, easy to use application that allows you to:
  • Create a set of recovery disks operating system

  • Recover the PC to the State of initial operation critical system failure

  • Use the extra discs that are available with recovery disks

  • Backup and restore important files

  • Reinstall the applications or specific drivers

  • Restore the computer to an earlier point in time

  • Check the status of the PC and installed files

  • Do not delete the HP recovery Partition

  See you soon.

• Repair of Windows Vista Edition problem Home Premium: a the system registry file is missing or damaged. Status: Oxc000014C

  Hello

  I have a laptop Lenovo G550 with processor dual-core Intel, 4 GB RAM, 320 HDD with Windows Vista Home Premium 64-bit works fine yesterday. All of a sudden all processes be losed with strength and i' received e of error messages to send information or the rejection message. And then he suggested e to perform the disk check so I tried to restart to get the following message.
  Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C
  I tried all the boot options like the boot safe mode, last known, good configuration but without success.
  I tried to fix it by using a Windows Vista DVD,
  Press any key to boot from the CD/DVD...
  I see a bar saying Windows is loading files in progress...
  After that, I get progress bar of Microsoft Corporation followed to a black screen.
  After 10 minutes or so I get a mobile mouse on the black screen pointer. And that's all, he remains the same for centuries.
  I am out of resources on how to solve this problem.
  Any help will be greatly appreciated.
  Thank you.

  Hello

  That's what you should see when you use a Vista DVD take to do a Startup Repair:

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  You have obviously something wrong with it.

  See you soon.

• problems of registry Vista-"windows failed to load because the system registry file is missing or corrupt"

  introduced a new card mother but used to winows full vista it tells me "windows failed to load because the system registry file is missing or corrupt" I can't fix it some trys to reinstall nothing helps, what I do is never had this problem b4?

  my disk is scratched then put xp on site

• Where are the "System Restore" files in Windows Vista Home Premium

  Where are the "System Restore" files in Windows Vista Home Premium.

  I would like to simplify the installation process.

  Is there a program in Windows Vista Home Premium which can create an image disk for future use.

  Is there a good disk image program/software?

  Can I record a restore point on an external drive? That is, only the last 5 days of "restore points" are available in the system restore.

  Hi SoundHealth,

  Follow the steps in the article.

  Restore your computer from a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Back up your programs, files and system settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  No, you can't save a restore point on an external drive.