Disks of the virtual machine consolidation is necessary - vCenter 5.1 U1 + ESXi 5.1 + VDP 5.8.0

Similar Questions

• Disks of the virtual machine consolidation is necessary is Unable to Access file < file_name indeterminate > because it is locked

  Hola a tod@s,

  After using the application of only backup '5.5 virtual Data Protection' y no las snapshot los correctamente foot VM´s, me appears a message en the pestana "Summary" indicating:

  Consolidation of disks of virtual machines is necessary

  Bueno... mirando the documentation oficial, are several soluciones, the first are pulsar en option "SnapShot-> Consolidate" pero muestra el error:

  Unable to access file < unspecified file name > because it is locked

  What is seria el siguiente paso?

  -ESXi version 5.1

  -En VM´s production...

  Gracias por todo.

  Saludos.

  Please if you ha sido util the respuesta correcta como marca respond.

  Gracias!

• Copy of the data of the disk of the virtual machine on a Local disk is too slow

  We have recently implemented vMware view.   We vSphere 5.5 and 5.2 and made Desktop visualization server.

  We have SAN as HP 3Par and Esxi hosts are HP ProLiant DL380p Gen8

  Now all trying to copy the data from the disk of the virtual machine disk of the local computer are too slow. But if we are writing data from Local disk on the disk of the virtual machine is normal. And copying data between the two virtual machine disk is also fast.

  Thanks in advance for your help

  Dear all,

  Thanks for your help.

  We have analyzed the issue in 360 degrees, and we also examined your entries. Finally, we found the problem. It was that a defective fiber link has been creating the problem.

  We have recently implemented vMware and this flaw in fiber can also happened during this period. That's why we thought it may be because of vmware.

  Thanks again for your help

• Connect physical hard disks to the virtual machine (and leave the data intact)

  Hello

  I'm looking to virtualize a SOHO headless server, that I use mainly for secure file storage.

  Currently, the system runs Linux installed on a small disc and has two drives 1.5 TB, used exclusively for data, in a cluster of ZFS mirroring. (I use the ZFS-fuse Linux-based application).

  I want virtualization for two reasons. One is to make administration easier and safer - avoid having to connect a keyboard and the physical monitor to the box from time to time. The other is that the machine is a bit more powerful to handle the load, and I'm hoping to make it work on other, more challenging tasks.

  Now, there is a catch. These discs are as highly important. I mean the data on them. What I need is to convert the current Linux system to a virtual machine, or re - install Linux on a virtual machine (don't like that), then connect the physical disks to the virtual machine as if they were actually connected.

  I certainly don't want to vmware touches those disks somehow.

  I've read the documentation, but I'm a noob when it comes to server virtualization and system engineering and don't quite understand if this is possible or not. These discs are not a SAN, they are physically connected to the server, I want to install vSphere on. (Of course, I'll log out when I run the setup of vSphere. But I need plug them again later, and they need to be sure that vmware will leave them alone and pass them to the virtual machine transparent.)

  Sigmoid wrote:

  Oh yes, the cluster mirrored ZFS. It is essentially a software RAID type thingie.

  http://en.Wikipedia.org/wiki/ZFS

  A material, or the point of view of virtualization, it appears two hard drives with a single huge partition on each that is not transparent to anyone, except the implementation of ZFS.

  OK, means that you can break the RAID, connect the drives to different host and configure RAID once again, right?

  Let's do it this way

  1. We will need a disc player more for VM, cause on flash, we install ESXi
  2. I will share ZFS :-), all you need to do with that before you install ESXi
  3. make the BACKUP!
  4. Disconnect the data host drives
  5. install ESXi 4.1 U1 free version on flash
  6. Download the site VMware vSphere client
  7. Connect the VM disk to ESXi
  8. customer help create the virtual machine and install the OS on it
  9. stop the virtual machine and esxi
  10. connect DATA drives to the ESXi host
  11. begin to ESXi
  12. See how to add RDM on youtube, after client use, change first hardware VM--> add a new hard disk--> choose Raw Device Mapping--> (physical or virtual) mode--> store it with folder VM - FACT
  13. Start the virtual machine, now your VM should see both drives, with good data course :-)

  I have just made this procedure (add ROW with data in Linux VM) on ubuntu VM, works well

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Import the Virtual Machine Notes to new vCenter 5.1

  Is there a way to import the Virtual Machine Notes to a new vCenter attribute? I am able to export notes to help

  $vm = get - VM | Select Name, Notes

  $vm | Export-csv notes.csv

  but cannot find a way to import...

  Thanks Andy

  Hi Andy,.

  to import the attribute information about the virtual machine in a new vCenter server, you can use the following script PowerCLI:

  Import-CSV -Path Notes.csv |
  ForEach-Object {
    Get-VM $_.Name |
    Set-VM -Notes $_.Notes -Confirm:$false
  }
  

• Virtual machine consolidation is necessary.

  Hi guys,.

  I have a problem with esxi no space for vm, it can't start, also cannot consolidate due to no space. Could you please advice what can delete the folder of the virtual computer?

  Thank you.

  I got scared to see a thin virtual disk configured with multiple snapshots. Show file sizes, you may need to up to ~ 37GB (size of 75 GB configured minus 38 GB currently used by file flat th) additional disk space on the data store to consolidate snapshots.

  Unless you have an another data store with enough free disk space to migrate/clone to the virtual machine, your options are limited. What can work, is that you register the virtual machine as an OVF (on the ESXi host file menu) on your PC (assuming that there are enough free space on the disk), then delete the VM on the ESXi host and finally re-import the file of Fiction. Another option to use VMware Converter or a backup application.

  André

• vRO presentation: return the total size of the disk of the virtual machine

  Hi guys,.

  I have a catalog item to extend a drive, which is presented to the vRA advanced services and picks up the vRO workflow. For this reason, the default IaaS vRA no between not affecting resource management. So I would limit the end-users to a maximum size of the virtual machine - that is to say, if the size + total size they intended to expand is > to a specific size, then the workflow will report this.

  I wrote the following code to return the total of all the disks that are attached to a machine. Then, it comes to the tab Presentation vRO to fill the discs max value. It works fine when I use the code as a workflow and connect the output. However, vRO presentation does not return a value any. Anyone had similar problems or I made a stupid mistake and missed something?

  var total = 0;

  size var = new Array();

  var features = vm.config.hardware.device;

  var h = 0;

  for (var i in devices) {}

  If (devices [i] instanceof VcVirtualDisk) {}

  size [h +] = [i] devices, .capacityInKB / 1024 / 1024;

  Total += devices [i] .capacityInKB / 1024 / 1024;

  }

  }

  return to the total;

  
  

  
  

  
  

  Thank you

  bradger33

  resolved - used the wrong presentation vRO variable. Had to use rather than answer pre-defined data binding

• delete a virtual disk of the virtual machine of broken storage

  I have a virtual disk to a virtual machine on a broken iSCSI storage,

  now I can not remove the disc from the virtual machine.

  ESX 4.1 does not see the now broken iSCSI storage.

  See attach.

  Remove the virtual machine from the inventory and edit VMX manually deleting the reference to this disk. After that, add the machine virtual back again for the inventory.

• Cannot start the virtual machine guest after receiving "License expired message" host ESXi 5.5

  I can't start computer virtual invited after receiving "License expired message" 5.5 ESXi host. I am able to copy the vm folder prompted with all its files using WinSCP I had already installed on a desktop computer in the network.

  However, it takes an extremely long time to download the VM [2.5 mb/s], which is of course a different question.

  It seems that I was still on the trial with my vsphere client license, until it expired. I am able to view the virtual machine within the workstation 10, but I can't turn it on. It says "Please install a license to power on this computer" there is no way to install a license anywhere.

  My question is... .will I be able to access this virtual machine if I download on an external hard drive, then add it to 10 VMWorkstation that I possess a current valid license?

  Even if the evaluation license has expired, you should be able to connect to the ESXi host using the vSphere Client and follow the steps mentioned in the article that I posted before you enter the free license key.

  André

• Change the amount of vCPU in vCD deletes the virtual machine network connection in vCenter

  
  It is a problem of crazy that we discovered, and I wanted to know if anyone had seen him.

  First of all, we miss the following software versions:

  vCD: 5.1.1.867405

  vCenter: 5.0.0 Build 913577

  ESXi: 5.0.0 build 1024429

  If you go to vCloud Director and change the material properties of an existing virtual machine (Powered off) any change in the amount of vCPU (to something new), inside of vCenter status of the network will change to the port group Standard (inactive) none.

  
  Even if, before making the change, the virtual machine is connected to a distributed port group, and works well.

  We now display an SR to VMware, but sometimes it is worth running this by the community to see if other people have already seen or indeed want to test on their deployment.

  
  Thanks in advance

  We have solved the problem now.

  The reason why that we faced this problem is because we used the wrong order in the API.

  You must ensure that you use the undeploy command when you work with the vCD API otherwise you end up with a disconnected network card.

• Having to constantly consolidate the disk of the virtual machine?

  I'm having a problem whereby several virtual machines on several 5.1 ESXi hosts are requiring a consolidation of virtual machine disk. I perform "snapshot consolidation" and it ends after a few seconds, then next day the configuration problem returns?

  There are no snapshots on the affected virtual machines

  OS: 2008R2 and 2012

  ESXi 5.1 stand alone hosts

  Thank you

  Brendan

  Thanks guys, it was in fact the backup software (CommVault) do not clean a vsa backup attempt failed. Everything is good now...

• Newbie - how to add another hard disk to the virtual machine

  We have just started to try ESXI on a new database server.

  The previous server got an SSD, it is necessary that our needs. Now, we got the new Intel Server, was paid $ 3000. There are 2 hard drives and SSD, all on the integrated chipset. We can't find anywere in the interface of PC ESXI or VMWare Go web site to add the SSD to the list of storage. We imported to test an installation of Windows Server 2008 and it works, but only C:, no other hard drive found!

  Help, please!

  pay? -None
  If you connect to http://ip-of-your-esxi , you should see a hint where to download it if I remember correctly

• Physical disk how can I add in the Virtual Machine?

  I am trying to set up a network of storage, but I discovered it is there is a limitation for the addition of physical hard disks in the virtual machine.

  I have 1 virtual hard disk for the operating system (SCSI), an invited so I try to add more than 4 disks, but it should not add more than 3. They showed that (IIRC).

  I try to add 4 x 1 TB as physical hard disk in virtual machine hard disks, but it says that I must remove one to add.

  1. in the settings of the Virtual Machine, is there a difference between (SCSI) (IDE) and why are the physical disks (IDE)?

  2. What is the limitation of total hard drives under the VM settings, four?

  Johwwy

  physical disks can be detected such as IDE or SCSI - depends on the drivers used by the host

  SATA in ide-compat mode is used as IDE

  SATA AHCI mode is detected as SCSI

  It is possible to rewrite the descriptions after their creation.

  It is a little advanced - see my notes

  http://sanbarrow.com/VMDK-basics.html#changeadapter

  for a start, it may be necessary to also change the geometry... ask first so uncertain.

  I think the limit of physical disks that can be attached to a virtual machine is 64 = 4 x 15 - scsi and IDE 4-disc drives

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Move ROW with dynamic disk to another virtual machine

  Hello

  I'm in a situation where I have to leave my RDM Win2003 VM to win2008, but the complexity and multiple physical RDMs here make only dynamic partition (RDM1 1.5 TB, RDM2 1.5 TB, is drive G RDM3 1 TB 4 TB),

  Now my question is if I can move this partition of G (which includes 3 disks RDM) again an another VM (win2008)

  Thanks, SD

  Hello

  This does not resemble a specific question VMware.  On the contrary, seems like a question of Microsoft Windows.  Just make sure the hosts on which the virtual machine of 2008 runs can see the same ROW and follow this procedure to remove dynamic disks of the virtual machine of 2003 and add them to the virtual machine of 2008.

  Move disks to another computer

  All the best,

  Mike

  -----------------------------------------

  Remember to mark this reply 'proper' or 'useful', if you found it useful.

  Mike Brown

  NetApp, VMware and Cisco data center guy

  Consultant engineer

  [email protected]

  Twitter: @VirtuallyMikeB

  Blog: http://VirtuallyMikeBrown.com

  LinkedIn: http://LinkedIn.com/in/michaelbbrown

• How to move the virtual machine from one host to another?

  The two boxes under ESXi 5.0 (hypervisors freely licensed).

  I have a virtual machine (FreeBSD) that I need to go to another box.

  Network ports are not the same, but I guess that's not a biggie to reconfigure the network cards. Other than that, I have to follow a few best practices/SOPS or copy & paste is everything I need to run perfectly on a different host?

  Thank you very much!

  FastSCP allows you to copy directly between hosts, so it can save a lot of time you copy.  I don't know what you mean by 'manually' copy files.  Do you mean using the vShpere client and download the files to a location then download them to the new host?  Either way works perfectly, but FastSCP you must save a step.

  If you have currently snapshots, you can consolidate first or leave em and just copy them with the rest of the virtual machine. There should be no need to do something with snapshots, if you perform a migration 'offline '.  As long as you take all the files, snapshots will be displayed on the destination host computer when you save the vm on the host.

  I did 'on-line' migration of large virtual machines first to the take a snapshot on the source host, copy basic to the first destination host disks while the virtual machine was still running on the source host.  When I was ready to migrate the CPU processing, I power off the virtual machine, copy the other files (which would include the deltas from disk and whatnot) and turn on the vm on the destination host (which would cause only a few minutes of downtime).  Later, I consolidate records by removing the snapshot on the destination host.  Way to a poor man to do a migration of vm on ESXi free edition with little downtime.