Disks supported for local data banks?

Similar Questions

• Creation of Raw Device Mapping (RDM) is not supported for local storage (1017530)

  "Often, localstorage devices do not support VPD page 0x83 and can therefore be used for Raw Device Mappings (RDMS)." The content of the page 0x83 is used as a unique identifier for the device. For more information, see creating Raw Device Mapping (RDM) is not supported for local storage (1017530). »

  Does anyone know if this is even the case for modern storage?

  We are a dell shop, wishing to take advantage of the ability to create up to 64 TB RDM.

  However, the storage of the host in question will be local SAS only.

  Prefer not to have to merge muliple 2 TB VMDK into windows to make a record of 4.5 to.

  Then projected on the presentation 1 x 4.5 CT rdm

  If you plan to use a SAS controller, you should be able to do this. Your drive will be identified as a device of the naa, and you will be able to add as an RDM to VM - only with ESXi 5 (which can support more than 2 TB LUN).

• Strategy for local data storage

  I'm working on an application that allows you to store a lot of data locally and I was wondering if anyone has any ideas on whether it is better to write in a persistent storage or write it to a local file.

  My application will store events, each event could have anything from 50 to 1000 (or maybe more) elements (as basic data types such as float, long, etc.) that are associated with.

  I was considering the creation of a persistent store of events, each might have a name, timestamp and store some info Basic, then bound, by store ID, persistent separation for each event. Would this be the recommended way to store this information. Or would it be better to have a single persistent store that contains everything? Or maybe that's putting too much data in a persistent store and I have to use a store for the list of events with the individual event data stored in a local file?

  Ultimately, user will have the ability to manage data, removing old events and/or by downloading the event data for the online storage, but before I look at coding this, I expect words of wisdom on what strategy of data storage that you would recommend.

  I agree that Persistent Store would be a good fit at first, especially since you would not serialize the data in and out of storage.

  Your biggest problem is perhaps the object handles, because there are only a limited number of them.

  Sorry I have been hunting round, there was once a document listed the size and memory handles available for each device.  It is a recommended memory PDF, but I don't find it anymore.  Anyone know where it is?

• Nobody knows the largest available space supported for vmfs data store when creating a new form of vmfs data store a 3T lun mapped from FC storage.

  I traced a form of lun 3 t FC storage.

  And the project to create a vmfs on this lun, creating, data store, space available by default is 1024 G, no 3 t, so I guess that maybe some limitations.

  Anyone know? Thank you very much.

  Hello

  The limit is 2 TB - 512Bytes

  That 512 bytes is VERY important to remember.

  You will see that 1 TB as it roles once you exceed 2 tablespoons.

  As Anton suggested you can use two 1.5 TB LUN safely. However, you can in fact more than 500 GB LUNS or such. Will the LARGEST you can is not always the most efficient allocation of resources.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• Support for copying data using sql

  Hello
  I want to fill the data in a table in a way

  EID     ENAME     EADDRESS     ESALARY     EDEPARTMENT     MANAGER_ID
  
  101     Pankaj Saxena     New Delhi     2000     IT     
  102     Sanjay Singh     New Delhi     2000     IT     101
  103     Dhiraj Tuteja     Kanpur     3000     NONIT     101
  104     Nitin Grover     New Delhi     4000     IT     102
  105     Juhi Agarwal     Itawa     5000     NONIT     103
  106     Siddharth     Itawa     5000     NONIT     103
  107     Kalyan     Itawa     7000     IT     104

  Now I want to fill the same data 10 times but the IDS must be incremented
  What should I do?
  I use oracle 9i
  

  insert into demo_1
  select eid,ename,eaddress,esalary,edepartment,manager_id from demo_1

  I have eid necessary to increase sequencially

  Create a sequence.

  insert into demo_1
  Select sq.nextval, ename, eaddress, esalary, edepartment, manager_id demo_1

• get support scsi LUNS for the data store?

  I've been delving into the different classes available to HostSystem.queryHostConnectionInfo () and none of the properties appear to contain the id of naa I see when I look at LUNS on an HBA.  How do you get to LUN support for a data store?

  Figured it out.  For anyone else who wants to know:

  I created two actions, one to return a hash of the id of naa-online data store object and another action to return a hash of the naa-online drive scsi id

  // actions
  //getDatastoresKeyedByLUN
  var o_diskHash = new Properties();
  
  for each (var scsiDisk in u_host.config.storageDevice.scsiLun)
  {
    //System.log("-> LUN: " + scsiDisk.canonicalName);
    for each (var dataStore in u_host.datastore)
    {
    if (dataStore.info.hasOwnProperty("extent"))
    {
    for each (var scsiDiskPartition in dataStore.info.vmfs.extent)
    {
    if (scsiDiskPartition.diskName == scsiDisk.canonicalName)
    {
    o_diskHash.put(scsiDisk.canonicalName, dataStore);
    }
    }
    }
    }
  }
  
  return o_diskHash;
  
  // getScsiDisksKeyedByLUN
  var o_diskHash = new Properties();
  
  for each (var scsiDisk in u_host.config.storageDevice.scsiLun)
  {
    o_diskHash.put(scsiDisk.canonicalName, scsiDisk);
  }
  
  return o_diskHash;
  
  // in workflow
  for each (var can in dstoreMap.keys)
  {
    System.log(dstoreMap.get(can).name + "(" + lunMap.get(can).canonicalName + ")");
  
  }
  

• [SRM 4.1] Dealing with local data warehouses?

  Hello

  I'm currently loaded with SRM 4.1 installation on our companys vsphere and while I did this before that I have never worked with VM on local data warehouses. There are three additional centers for both, I'll be tipping. These three data centers all run on Cisco UCS 210 M2 servers spread across two data stores. The virtual machine can be found on the second partition of the UCS VMFS.

  I don't know why it was created this way that I wasn't there when it was put into service (it seems strange, though, as they have a shedload of space on the Symmetrix). So I ask really (a person with a more experienced eye), what are the options for local data warehouses with MRS? I'm guessing limited to no support... so think I might watch svMotion

  Thanks for any advice.

  Hello

  With MRS. 4.1, the only option is based on the Bay of replication, i.e. SRM is only able to protect virtual machines residing on storage arrays supported with replication configured between them. SRM itself does not perform the replication. SRM is able to display your replica equipment and perform a few operations on the Bay of storage through the SRA (storage replication adapter) - software written by the storage provider.

  Yes, unless you use a storage device which can present these local data warehouses such as those shared and replicate them on the (and is supported with SRM), you cannot use local data warehouses. I have a limited knowledge of such things, maybe the other guys will be able to help more.

  In SRM 5 extra option has been introduced - vSphere replication, which allows the replication of virtual machines between ESXi hosts. You will need vcenter / SRM and ESXi 5 for this to work.

  I do not understand your configuration. How many centres of data do you have? SRM only supports the scenarios one to one, and many-to-one.

  Michael.

• VMDR - local data store

  Hello

  I would like to know if it is possible to create a local data store to use as the destination for VMDR?

  If so, how?

  The only option I get in VMDR is to add a network share.

  Yes, you can of course add the local data store as a destination for camera VDR.

  Step 1. Add a disk, virtual appliance VDR as you add a virtual disk to a virtual computer. When you create a new virtual disk, select the local data store and specify the size chosen.

  Step 2. Connect to the VDR thanks to the welcome > Solutions and Applications to destination you would see this space, format, and edit and your VDR unit is ready to be backed up.

  Hope this helps!

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  f 10.

  VCP3, VCP4, HPCP, HP UX CSA

  http://KB.VMware.com/

• VMware converter 4 support for partitions on dynamic disks

  I currently have a server physical windows 2003 which has its system and data partitions defined as dynamic disks (C and D partitions lie on disk 0-dynamic) not well why it's set up this way, it was built just like that.

  The goal is to convert this virtual server and I read many forums stating that dynamic disks are not supported for vmware converter, but some cases have succeeded where the target score was a record time-basic-but-now-dynamics.

  Is this the case? and if so, what alternatives can be tried to virtualize the server.

  Dynamic disks are supported for Windows.  The resulting virtual machine will only basic disks in a hot clone.

  I would just suggest that you make a clone of hot regular and do a slight reduction in the size of the disc resulting (even if it is 1 MB).

  Second, ensure that the system starts out of the c:\ partition and it is marked as a partition active and has a file boot.ini in the root.

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• What is the date of end of support for Firefox version 19?

  I wish to confirm the date of end of support for version 19, February 2013?

  Security updates support ends when the next version of Firefox is released, so while Firefox 20 was released 6 weeks ago and 21 Firefox will be available Tuesday, May 14, that means that Firefox 19 is is no longer officially supported.

  I see that you are still running Firefox 17.

  Is there a special reason why you don't have not updated to the current version?

  The version of Firefox Firefox 17 that you are currently running is no longer compatible with security updates

  Please upgrade to the latest version of Firefox 20.0.x.

  • Help > about Firefox
  • https://support.Mozilla.org/KB/update-Firefox-latest-version
  • https://support.Mozilla.org/KB/updating+Firefox

• Has acer iconica w500 supported for an internet data card usage?

  I was wondering if the acer iconica w500 have support for the use of a data of the internet to access wifi card. Can someone help me on this?

  Thank you

  Hello

  I never heard talk about trust, but to look at their site looks like a Standard USB data Dongle so yes!

• How can I move virtual machines from a local data store for a new iSCSI SAN?

  Hello guys,.

  Now that we have a new iSCSI SAN market how can I tranfer all the virtual machine to a local data store for a new SAN? Can I stop the VM in the host, and then copy the DataStore files with all the info on the new volume?

  Thank you

  Pesinet

  Alternatively, you can use VMware converter or cold Migration / Storage VMotion if you have the appropriate licenses.

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• End of the Date supported for Oracle BPM company autonomous 10gR 3

  I'm running "Oracle BPM business standalone 10.3.1.0.0" and I can't find a date "end of support" for the product. I found a Metalink note that reported a 'BPM Matrix interoperability', here:
  
  http://www.Oracle.com/technetwork/middleware/BPM/documentation/obpm-config-matrix-085247.html#bpmes10301031
  
  who shows me the interoperability information, but no end of support date. Any ideas on where I could look at?
  
  Thank you

  You can get this if you search for "Oracle lifetime support policy" on Oracle's Web site. At the top of this page, click on "Oracle Lifetime Support Policies"--> download the "duration of life-support-middleware - 069163.pdf" and go to page 31 of this document.

  Dan

• SQL Developer 3.0 EA 1 Advanced support for the type of data in the unit tests

  Hello
  
  According to SQL Developer 3.0 EA 1 New Feature List (http://www.oracle.com/technetwork/developer-tools/sql-developer/rel3-featurelist-ea1-166831.html#ut)
  the EA 1 version 3.0 supported advanced data types in the unit tests. This means support the ANYDATA and RECORD types? I installed version 3.0 of EA 1 to CentOS linux, but it seems that those advanced types are not supported yet. When I try to add a unit test for a function that returns the record type, I get quick error: "the return of PL/SQL RECORD type is not supported. Cannot test (function_name) because 1 arguments have not supported for types". Also if I try to unit test procedure which parameter is of type ANYDATA, I get quick error: "the type UNDEFINED P_DATA argument is not supported. Cannot test (procedure_name) because 1 arguments have not supported for types". Are those advanced data types supported in SQL Developer 3.0 FINAL version?
  
  Thank you
  Miikka L
  
  Edited by: user12844253 the 27.10.2010 16:31

  Hi Mikka,

  Only simple PL/SQL records are currently supported i.e. those containing no optional or repeating components and where all components are themselves supported. This restriction is in place, due to the fact that we are using JDBC as a parameter mechanism which does not directly support the passage the PL/SQL record type.

  ANYTYPE and ANYDATA are currently not supported because they have a dynamic value type and must be set programmatically. In the future, it would be possible to support these via the dynamic value and and validation features.

  This will remain for the final version.

  Kind regards
  Richard

• How can we force to use for locale-specific formatting of data?

  Hi all

  I use the Date/Time Format string to format the current date to a formatted string, I'm precise %b to show the short month, but this parameter is dependent on the local host. What is a way to force the format on a local data instead of using the regional settings of the OS? Thank you.

  I don't believe it. The simplest solution would be to call the DateTime in seconds function, extract the resulting month value of the cluster then use a lookup table to determine the name of the month.

  The table of correspondence could be as simple as a multiline string is indexed with the Line Pick function using months as the row index.