Disorders CW VMS with IDS MC installation: database server does not

We install a new management station for our ids devices to replace our previous one that is a bit underpowered, but we cannot get it running to the point of being able to add our sensors. In the journal of the files IDS_Analyser, IDS_EvsServer, IDS_Notifier, IDS_ReportScheduler, we get errors that the database server is not running. In addition, we now have an extra record in the files smdb_upgrade001.log and smdb_upgrade002.log, indicating that the upgrade from version 1.0 to 1.1 database failed due to another error:

-193--primary key for table 'sys_strings' is not unique

However, we thought that we should follow the proper procedure in the installation of all packages:

-CW CDOne fifth edition (we installed CiscoView, utility of NMS and CMF integration)

-Services common (from the CD CW VMS management & monitoring V2.2)

-Installation of machines virtual CW for IDS V2.2 by selecting management IDS sensors, catalyst ID SM and monitoring security on the same CD

So that should be enough to have a work environment and in fact we have not all errors in the installation of all components. Even all CW services are running according to the CW process management.

We are wasting a lot of time trying to get it right for once.

Johan, it s a while since I made the installation, but I think CiscoWorks-VMS-2.2-Update-1-w2k-k9.exe installing, check SecMon you install and update only if it is less than 1.2, after installation SecMon 1.2.3 If you haven t already done and then add the patches. I hope that the advice I gave you here is correct.

Tags: Cisco Security

Similar Questions

  • Listener (and the database instance) does not start automatically: ORA-12514: TNS:listener does not currently of service requested in connect descriptor

    Hi all... I am a newbie with oracle database.,.

    I have the problem of monitoring:

    I installed Oracle Database 11 g R2 XE on my CentOS 6.5 guest operating system.

    I changed the host name in my CentOS so (where installed oracle 11g R2 XE) after the installation was completed successfully.

    Installation-) before and during the hostname is localhost.

    (-) After the installation, I changed the host name in VMCentOS

    From the moment where I changed the host name, nothing starts automatically. In particular, the listener and the database instance does not start automatically.

    When I start the listener manually and I try to connect to the instance of database with SQLPLUS I get this error:

    ORA-12514: TNS:listener is not currently of service requested in connect descriptor

    I think that the problem is due host name changed because I have to test and debug the object, re-installed a machine virtual operating system CentOS, re-installed oracle database 11 g and I do not have this problem. The database instance and the listener starts automatically!

    Can someone tell me if, maybe, the problem is with the host has changed? ... and why?

    P.S.: After changing the hostname I also modified the listener.ora and the tnsnames.ora by changing the HOST with the correct host name.

    Hello

    It seems that you don't install Oracle Database Express Edition (XE). If you post this question in the wrong forum.

    When you install EA or there is no script that starts the database at startup.

    If you wish, you can create by yourself. For example search for instructions to Google how to create script.

    Kind regards

    Jari

  • UCR-6002: the database specified does not have the minimum requirement to load the metadata repository.

    Hi all

    I want to install a test environment with the following software products:

    WebLogic Server 10.3.6

    WebCenter Capture 11.1.1.8.0

    WebCenter Imaging 11.1.1.8.0

    BPM 11.1.1.7.0

    SOA Suite 11.1.1.7.0

    Oracle Database Enterprise Edition Release 12.1.0.2.0 12 c

    I use the remote 11.1.1.8.0 to create the database schemas.

    When RCU checks the prerequisites, it comes up with a warning as follows:

    «The database you connect to, is one newer than the supported version.» See the matrix of certification for the supported DB versions".

    If I type 'ignore' on the message box, it stops the verification process will not continue. Also, if I type "Cancel" does the same thing.

    The error message displayed in the Message box is both below:

    UCR-6002: the database specified does not have the minimum requirement to load the metadata repository.

    UCR-6080: Global check prerequisites failed - requirement of verification for the specified database

    The database that you connect is a CDB that is not supported.

    Action taken:

    1. check again on the database character set and confirmed it is set up correctly for AL32UTF8

    2. the databases are supported for WebCenter 11.1.1.8.0 + 12.1.0.1, so the database version is supported.

    Hope someone knows what's going on.

    Thanks in advance.

    Try to create a plugable (PDB) database within the CBD and then rerun

    the UCR.

    May be restricted the RCU to install MDS and other schemas FMW the

    CBD, but rather in the PDB.

    More information on PDB and CBD you can find here

    http://docs.Oracle.com/database/121/CNCPT/cdbovrvw.htm#CNCPT89235

    Hope that helps,

    Anatoli

  • Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

    Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

    Can you please explain the concept of what a server is and how can I ensure this does not happen.

    Thank you very much

    original title: Server

    Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

    Can you please explain the concept of what a server is and how can I ensure this does not happen.

    Thank you very much

    Launched a scan with which product (be specific, up to the exact version)?

    What version and architecture of Windows are you using?

  • I want to finish with the words, or if it does not remove all hotmail accounts and start cleaning up

    I'm blind to long to get the words of clutter. can we do without >

    I want to send an e mail and the spam message. I am legally blind and long to get jumbled words. I want to finish with the words, or if it does not remove all hotmail accounts and start cleaning up. ??

    The feedback forum is to post your comments on the web site of Microsoft Answers, only not to ask questions by e-mail.

    Any Hotmail questions belong to http://windowslivehelp.com/product.aspx?productid=1

  • I get an error "the server does not support an SSL connection" with a code of error 0x800CCC7D in Outlook express.

    I followed Bruce Hagen and still cannot send to the OE section. Reception is no problem. When I try to send I got the following error msg: "the server does not support an SSL connection. "Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, server response: ' 250 8BITMIME ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D. I tried to change the port for outgoing to 456. When I do so I get this error msg: failed to connect to the server. Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, Port: 456, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E.  Is there a cure for this. He just started two days or at least that's when I noticed I cud not send. If you can help me I will appreciate it more. Thank you.

    JP banks

    Original title: cannot send using OE 6. Reception Ok.

    Hi JPBANKS,

     

    Thanks for keeping us posted and share this information with us.

    Glad to know that the problem is solved. Do not hesitate to contact Microsoft Windows Forums for issues related to Windows in the future.

  • I have a new laptop with Windows Media Player 10, which does not recognize my MP3 player: this has happened once before and I was able to download Windows Media Player 9. Where is he now and can do it again?

    I have a Samsung YP - U2J MP3 player and until I had to buy a new laptop it worked fine with Windows Media Player 9.  The new laptop comes with Windows Media Player 10, which does not recognize my MP3 player that my COMPUTER recognizes it and says everything is fine.  Can someone help me?

    Hello Amaliada,

    Thank you for your message.  We will add your MP3 device manually.  Please follow the instructions below:
    Plug in your mp3 player and open Windows Media Player.
    Click in the empty space (next), then select 'Tools' > select 'Options '.
    Select the "Devices" tab (you see yourself mp3 palyer?) If not, click on "Add" > select "portable music players.
    From there, you will receive information about the addition of your device.

    Please let us know if it did or did not help to solve your problem.

    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • I got the job of Corel Wordperfect Suite 7 on Windows XP. I tried to work with this application on Vista, it does not work.

    I got the job of Corel Wordperfect Suite 7 on Windows XP. I bought another computer, I tried to work with this application on Vista, it does not work.

    I tried not to work with Windows 7. Please can someone help me. I took a few photos for businesscards en other extensions in collaboration with .wpg and .shw.

    ERL
    Rob

    I got the job of Corel Wordperfect Suite 7 on Windows XP. I bought another computer, I tried to work with this application on Vista, it does not work.

    I tried not to work with Windows 7. Please can someone help me. I took a few photos for businesscards en other extensions in collaboration with .wpg and .shw.

    ERL
    Rob

    Keep in mind that WordPerfect 7 is a very old version - eight versions. Usually very old versions of almost any program do not work on newer versions of Windows. I don't know about you, but I suspect that you must upgrade to a newer version of WordPerfect.

  • Dell Inspiron Laptop with Vista installed at the factory does not start.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: Dell Inspiron Laptop with Vista installed at the factory does not start. The display shows

    Indicator of treatment MM061 series white 80% in all of the BIOS revision A13 treatment indicator always goes to the same place and stops. I tried to tap the F8 key, but nothing happens.

    If you used Dell or the recovery Partition recovery disks to restore the system, you must talk about Dell problem because it's their software - not Microsoft.  We don't know what's on it or its operation.  We have no information to help us help you.  You need to deal with them.

    Sorry we can't be more helpful.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Music and ads are ok. Videos with speaking parts (last tested on the episode of Letterman with Tina Fey as a guest) does not work.

    Hi, I have Windows 7 and the Sound Blaster Recon 3D PCIe audio device. In the last few weeks, I noticed that some videos will play without problem and some have the following problem: the music and ads are ok. Videos with speaking parts (last tested on the episode of Letterman with Tina Fey as a guest) does not work well. Specifically, I hear a noise when they speak. But if I keep place the volume of the speaker (on the icon) and keep clicking the open icon, the sound begins to get stronger and you can actually hear it above his ' ding ding ' by clicking on the icon of the speaker volume. I've never had this happen before. I don't think I did something different from my usual activities lately and haven't downloaded all new program. Music plays without problem. Only the French-speaking parties. I tried the program compatibility troubleshoot and it told me "Incompatible application". Don't know what it means that I am aware of no incompatibility. Never happened before. Just suddenly appeared. Don't know if updates recent MS interfered with the audio device.  Also, I tried looking for questions that are already using the Control Panel, Manager of devices... and no problems were discovered. I put the volume on the strongest settings already and that doesn't work anymore.

    Thanks for your help to solve this problem.

    Just an update.  Problem solved. Faulty speaker connections. Did not touch the connections before the problem, so not sure what happened to these connections, but the problem is resolved. Thank you.

  • IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

    IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

    Hello

     

    Thanks for posting the question in the Microsoft Community!

    You can't use the wireless connection and the message that the DNS server is not responding.

    The problem may occur if the computer is unable to connect to the DNS server.

    To check, I suggest you follow the steps:

    Method 1: Re-register the DNS

     

    a. Click Start. Type cmd in the search box and press ENTER.

    b. at the command prompt, type the following command and press ENTER:
    ipconfig/flushdns (there is a space between ipconfig and /)

    It will display the message properly emptied the cache of DNS resolution.

    c. at the command prompt, type the following command and press ENTER:
    ipconfig/registerdns (there is a space between ipconfig and /)

    d. at the command prompt, type the following command and press ENTER:

    ipconfig/all (there is a space between ipconfig and /)
    The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

    If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
    If this is the case, try this:

    i. enough at the command prompt ipconfig and press ENTER

    II. ipconfig / renew in command prompt and press ENTER

    The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

    Method 2:

    a. click Start and then click Control Panel.

    b. go to the networking and sharing Center and then click on change adapter settings.

    c. right-click on connection to the Local network and select Properties.

    d. Select Internet Protocol Version 6, and then click Properties.

    e. choose the DNS server to obtain an address automatically , then press Ok.

    f. Select obtain IP address automatically.

    g. Repeat steps for Internet Protocol version 4 as well.

    http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

     

    I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

     

  • Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you.

    Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you

    I found the problem. I opened 'File' then saw 'save as template' grayed. Having not worked with models, I didn't know this isn't how it's done.

    What I should have done was file > save as > then clicked the drop-down 'Save as template' menu option. It was a simple mistake. Thanks to you all.

  • HY, I used to use your adobe photoshop cs6 I have my laptop. some of the reasons for my laptop was not working, so I've restored my laptop. I have tried to reinstalled photoshop with old license No, but his does not work. what I would do.

    HY, I used to use your adobe photoshop cs6 I have my laptop. some of the reasons for my laptop was not working, so I've restored my laptop. I have tried to reinstalled photoshop with old license No, but his does not work. what I would do.

    Please return to the message sent to you.

  • Server does not start after the installation of the USB bootable, ESXi

    Hello

    I installed VMware ESXi 5 on a SSD drive using a bootable USB key, but my server does not automatically start since the SSD after installation. I can boot ESXi in the offered by the BIOS boot menu.

    The startup configuration is perhaps incorrect because during the installation of the USB drive is present, but after the installation, it is not?

    Also has anyone seen this problem?

    Kind regards

    Gijsbert

    Updating the BIOS on the DQ77MK at 49, and you should be able to start - UEFI must never be activated.

  • Problem installing RCU with ADR: database Version does not match

    People,

    Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

    I need to develop the application for Admission online for future student to apply for admission.

    My installations of PeopleSoft are below:

    Server machine: Oracle Linux 5.10 (64-bit)

    Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

    Architecture Internet Oracle Linux 5.10 Server:

    (1) database server: Oracle Database 11 g version 11.1.0.6.0 is

    (2) the server application: Tuxedo 11 g

    3) web server: logic of Web 10.3.6.0

    (4) browser: Firefox Mozila

    (5) two Instances of huge database on the database server: 8.53 PeopleTools and Campus Solution 9.0.

    In order to develop the application for Admission online for students from the perspective, I need to make 3 parts below:

    (1) ADR installation (Application Development, Runtime) 11.1.1.6.0 (64-bit)

    (2) install the RCU 11.1.1.6.0 to create the scheme of OWSM_MDS (32 bit)

    (3) create or expand the WebLogic domain

    I installed Oracle ADR 11.1.1.6.0 (64-Bit) with Weblogic 10.3.6.0 in machine Server Oracle Linux 5.1 with success.

    Now I install RCU 11.1.1.6.0 (32-bit), on step 2 of 7 audit of the overall requirements, I face a problem like below:

    Type of database: Oracle Database

    Host name: 192.168.196.102

    Port: 1521

    Service name: HRCS90

    User name: SYS

    Password: mypass

    Role: SYSDBA

    Database is connected successfully. Verification of the 2 first elements are passed successfully.

    But check the 3rd issue "Check condition for the specified database" has not passed. The error message is below to:

    "The database that you are connected is not a supported version. Enter the database with version equal to or greater than 10.2.0.4.0 in 10 g or a version equal to or greater than 11.1.0.7.0 in 11 g. See the matrix of certification for the supported DB version".

    My database is the database Oracle 11 GR 1 material which is 11.1.0.6.0. This version corresponds to Tuxedo 11 g and WebLogic 10.3.6.0. If changing the database version, the entire Architecture of Internet PeopleSoft should be changed.

    The version of the RCU I install is 11.1.1.6.0 (32 bit) which does not really match ADR 11.1.1.1.6.0 (64 bit).

    My questions are:

    (1) what version of the RCU can be installed with Oracle Database 11 GR 1 material is version 11.1.0.6.0 (64 bit) and MARC 11.1.1.1.6.0 (64 bit) ?

    (2) is there another way to solve this problem? Find the right version of the RCU or update the version of database?

    Thanks in advance.

    Or you can try to do this work around (this work around will ignore checking the version of database)

    http://www.xenta.nl/Blog/2009/11/17/install-Oracle-fusion11g-repositories-on-11g-DB/

Maybe you are looking for