Display a route without coordinates

I'm following the example of routemapinvoker, which uses fixed coordinates shows a route.

Is it possible to display a route without coordinates, that is, an address?
Or do I have to add a geocoder call between the two?

on a second note, it seems that the sample is not workig on the DevAlpha at all, so it seems that I have to put this part of development...

Edit:

seems that the Readme is updated prior, after some tests it works now.

the starting location can be omitted, but the location of the end appears to be needed with the long/lat values, if I use only one address the maps shows app but does nothing.

Tags: BlackBerry Developers

Similar Questions

  • A wireless router, without a modem?

    Hello HP Support Forums users,

    I have a question about setting up a wireless router. I was wondering if it was possible to put in place, without going through a modem. Currently, I connect to the internet by plugging a cable Ethernet, CAT5 port on my wall, and then plug the cable on the side of my laptop. Right now I have a disabled and I need my laptop to be able to spend my small office. So, is it possible to configure a WiFi router without a modem?

    TannerJP wrote:

    Hello HP Support Forums users,

    I have a question about setting up a wireless router. I was wondering if it was possible to put in place, without going through a modem. Currently, I connect to the internet by plugging a cable Ethernet, CAT5 port on my wall, and then plug the cable on the side of my laptop. Right now I have a disabled and I need my laptop to be able to spend my small office. So, is it possible to configure a WiFi router without a modem?

    Yes, simply plug the CAT5 Ethernet cable into the WAN or Internet port on the wireless router.  That's what Verizon for their FIOS service.

  • Is there an easy way to create "the mouse on the text, to display the image" without coding it? I want an image to appear only when you move to a line of text. I found the code for it but I want to find an easier way. Thank you!

    Is there an easy way to create "the mouse on the text, to display the image" without coding it? I want an image to appear only when you move to a line of text. I found the code for it but I want to find an easier way. I'm creating a home page with a list of text links. I want to design as well as in the overview of one of the text links, a corresponding image is displayed to the right of the page. I also need a default image to rest all the time unless one of the other links text is hovered over. Thank you!

    Try to use a Widget for Composition in the Adobe Muse Widgets Panel.

    I would like to start with a blank publication.

    Place your text in the button area.

    Place your image in the display area.

  • display the form without exploring

    I use the generator of forms 10g.

    I want to display the form without exploring.

    Is this possible?

    Thank you.

    Start your application using Java Web Start.

    [Java Web Start | http://www.bloggingaboutjava.org/2007/04/running-oracle-webforms-like-a-client-server-application/]

    It is not supported by Oracle, but it works well and looks good.

  • How can I get the Extension toolbar icon to display the image without text (without affecting the other icons universally)? How can I change the text of the icons (except space)?

    «In the drop-down view menu, you can choose what to display toolbars: icons, text, or icons and text together.» By default, Firefox shows icons only. "Is it possible to choose a setting for a specific toolbar icon to be icon only (no text) without affecting all the other icons on the toolbars universally?

    Second, is there a way to edit the text on a toolbar button by another extension (because it takes up too much horizontal space in the toolbar because of the amount of text)? I do not know how to locate the xpi file and open it with Notepad, but then it is mainly (not English) code & FIND is not to search the text of the button (to change).

    These 2 questions should apply to the buttons of the Extension in general. However IF it makes a difference I'm talking for the toolbar button back to 7.0 top of the page that says 'Go to top/bottom '. I would like to at least change on "Go to", but my questions also apply to the other buttons Extension. I realize that it may be necessary to redo a fix/change whenever there is an update? Thank you.

    You should always see this icon that only the text of the label could be hidden.

    You can try this code in the file userChrome.css below default @namespace.

    @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    
    toolbar[mode="full"] #b2tTBUnicon { min-width:0px !important; }
    toolbar[mode="full"] #b2tTBUnicon .toolbarbutton-icon { margin-top:-20px !important; }
    toolbar[mode="full"] #b2tTBUnicon .toolbarbutton-text { display:none !important; }
    
  • How do I connect the router without home computer

    I bought my mother an Iphone and want it have WiFi instead of using 3 g data plan, but she doesn't have a computer at home at all. How to connect a router at home without a computer?

    Thank you!

    It doesn't work quite like that.  You don't just to go out and buy a router and instantly have wifi.  It you will need to sign up with an ISP first.

    Usually, it is best to first get your modem to the internet service provider and see what they give you.  The modem, they give you maybe already wifi and so you will not need to go out and buy a router.

  • computer says router without wire is hidden, but he shows with stong signal

    My windows 7 says it cannot connect to my wireless router because it is hidden, but it worked fine for several months previously. Also, my computer is easily connected to other WiFi networks without problem, and as I said, it shows the router with strong signal.

    Hi Jimmie,

    Thanks for posting the request in the Microsoft community.

    You get the error message? If Yes, what is the full and exact error message?

    Method 1:

    See the article and try to run the Troubleshooter:

    Using the troubleshooter from network in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 2:

    I suggest you to refer to the article and see if it helps:

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

    Let us know if it helps.

    Thank you.

  • Satellite R830-1GZ: ConfigFree Radar fails to display the networks without wire with the same SSID

    I have a new R830-1GZ Satellite with Windows 7 and a (much) older Portege M300 - all have two versions of Radar on them.

    However, while the old machine display correctly anywhere wireless and signal forces - even when there are multiple places with the same SSID - I use Powerline Extenders to extend coverage, the new machine with the last RADAR doesn't seem to be able to cope with these multiple identical wireless spots and fails to show more than one at a time - and then reliably.

    I should add that both machines work quite well in fact using the same SSID points connecting to the stronger.

    Is there a utility round way this or another that correctly displays it available different SSID and strength.

    Thank you very much

    Bill

    > Is there a utility round way this or another that correctly displays it available different SSID and strength?

    As far as I know there is no other Toshiba utility that could manage wireless networks and display devices Bluetooth as ConfigFree don't.

    I found some useful Q / A ConfigFree regarding:
    [ConfigFree: answers Questions &: http://www.toshiba.eu/innovation/solution_content_article.jsp?z=42&SOLUTION_ID=Conf igFree_QandA]

    Look also in Toshiba's technical knowledge base and search for Configfree for useful documents.
    http://www.Toshiba.EU/innovation/generic/TKB_SUPPORT/

  • Router without wire - best one for my work

    I am working in a software COMPANY where I have the option of WFH. I need to have the best Modem connection for my laptop and the smart phone given by the company. I have my own personal PC and printer, and the smart phone to connect to my wifi. Avoid any turbulence in the wifi connections. I would like to make a suggestion on the best wireless router.

    Hi Reach2rick. You can also check for Linksys routers last from this link: http://www.linksys.com/us/c/wireless-routers/

  • Outlook: Unread emails are displayed as read without being open

    Hello! I have MS Outlook 2003. When an e-mail in my inbos is marked are displayed during playback. For example, if I delete an email the following email is marked (no1). If I move to another (no2) messaging, no1 of the e-mail will be shown as being read. So I double-clicked on it not.
    Very frustrating!

    Otherwise there is no problem with the cursor.

    Hello

    Please check with the experts of the Office and Outlook here: (re - ask your question in these groups)

    Discussions of Questions General Outlook
    http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

    MS Office discussion groups
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
    And here:

    Microsoft.public.Outlook discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us

    Office newsgroups
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Display of newspapers without QNX Momentics IDE

    Hello world!

    I switched to QT Creator for faster compilation & deployment.

    Everything works including fines of debugging, but it displays no newspapers (qDebug etc.).

    I know that newspapers should be directed to stdout/stderr if they should be displayed in the console of QNX Momentics.

    This is done using qInstallMsgHandler and it works. But it does not work in QT Creator.

    So the question is:

    How QNX Momentics intercepts not newspapers once they are redirected to stderr/stdout?

    I was able to view the logs via SSH using the following method. He works for slogger2, but I don't know how to access the output stdout/stderr:

    (1) start blackberry connect

    / Applications/bbndk/host_10_0_9_52/darwin / x 86/usr/bin/blackberry-connect 192.168.157.128 - password devicePass - sshPublicKey «/Users/User/.config/QtProject/qtcreator/qnx/BlackBerry Simulator/id_rsa.pub»

    (2) ssh [email protected] "/Users/User/.config/QtProject/qtcreator/qnx/BlackBerry Simulator/id_rsa.

    (3) slog2info w | grep qt - msg

    All suggestions are welcome!

    He can't not stunts.

    I followed this guide:

    http://Qt-project.org/wiki/Qt-creator-with-BlackBerry-10

    Automatic completion did not work initially. I don't know why, maybe the roads were too long?

    As a solution, I created a symbolic link in the my project folder:

    include->/Applications/bbndk/target_10_0_9_386/qnx6/usr/include

    Then I added the following lines to the .pro file:

    INCLUDEPATH += include include/qt4/QtCore
    LIBS += -lbbcascades
    

    In addition, newspapers started working after restart.

    Everything works now.

    p.s. I use Mac OS X Lion.

  • The scenario that is balanced with two static routes without remote administration.

    Hello

    I'm setting up a switch 3750 PSI using MHSRP provider on the side. In fact I use two GigaEthernet connections.

    I want to create my side by using the static routes of load balancing, but traffic flows that I see are not identical or similar.

    See the router # running | Start iproute

    [...]

    IP route 10.0.0.0 255.255.0.0 10.255.255.1
    IP route 10.0.0.0 255.255.0.0 10.255.255.6

    [...]

    Router # show ip route

    [...]
    S * 0.0.0.0/0 [1/0] via 192.168.0.254
    10.0.0.0/16 is variably divided into subnets, subnets 23, 5 masks
    10.0.0.0/16 S [1/0] via 10.255.255.6
    [1/0] via 10.255.255.1

    [...]

    Either way, ip cef is already activated

    Here is the result:

    Interface 1

    GigabitEthernet1 is up, line protocol is up (connected)

    [...]

    Strategy of queues: fifo
    Output queue: 0/40 (size/max)
    5 minute input rate 35046000 bps, 4638 packets/s
    5 minute output rate 8671000 bps, 3846 packets/s

    Interface 2

    GigabitEthernet2 is up, line protocol is up (connected)
    [...]
    Strategy of queues: fifo
    Output queue: 0/40 (size/max)
    5 minute input rate 1000 bps, 2 packets/sec
    5 minute output rate 3859000 bps, 1714 packets/s

    IP CEF:

    router ip cef #show
    Interface of the jump following the prefix
    10.0.0.0/16 10.255.255.1 Vlan99
    10.255.255.6 Vlan99

    I have no configuration is no longer on the interfaces. I would add the ip per instruction packet load balancing?

    By default cef uses per load balancing destination, set ip load balancing by package on the concert links try again, are your equal to up to 10 links network on each side

  • Router without wire and/or alteration external Modem broadband

    Hello community,

    I have a strong feeling that my router wireless or modem broadband external has been hacked, or at the very least, is manipulated by someone else.  For example, my wireless Internet has suddenly been lost between 10 and 15 times during the month of November (and there was no climate to cause this). Also, when I use my laptop especially in early evening, the wireless Internet connection disappears suddenly. When I call the ISP and an agent to make a diagnosis of the problem, the Internet connection will be back. However, as soon as the conversation of the agent is complete, the wireless Internet will fall and does not return until the next day (and it happened again last night, Monday, December 3, 2012). It is no coincidence and therefore provide evidence that my wireless router and/or the model external broadband is falsification by someone else.  Furthermore, my office is connected to an external modem via the wireless router and use a connection to the local network to the Internet.  However, to have been taken when the Internet connection suddenly disappeared as well. Whenever I have troubleshoot with Windows 7, it will diagnose that there is a "problem with the adapter or wireless access point, but can not solve the problem."

    In regards to my wireless router, I made a critical mistake do not change the username and the word common for her when the router was first installed in April 2011. I changed the two this summer, something is flooded with my wireless Internet misadventures.  Also, I noticed that when I connect to my wireless router (brand and model: TP-LINK-WR941ND) and have completed all the changes in the configuration, there is no logout key to engage. Upon his return to the home page and resume immediately the IP address of the router, access is still open.  I have to close the browser and then come back before my user name and security key (e.g., password) are required for access. Also, I checked the router DHCP clients list to see if it is accessed by others, but my office and the physical address of the laptop is shown alone. Should I get a new wireless router or have my ISP change the modem broadband, or both?  Your ideas on how to fix this problem is appreciated.

    Thank you in advance.

    MoPete

    Hi Mopete,

    Thanks for posting in the Microsoft Community. According to the description provided, looks like you want to know why the connection Wi - Fi and internet is disconnected frequently.

    You checked the list of DHCP clients and only the recognized IP address is your desktop and laptop computers. This means that the router is not accessible by anyone else.

    Once the configuration of the router, the browser should be closed and reopened for the security settings enabled on the router, so it's normal.

    If the router is disconnected frequently, you may need to update the firmware of the router.

    Visit this link and click on the version number you are using and check if the router is upgraded to the latest firmware.

    http://www.TP-link.com/en/support/download/?model=TL-WR941ND

    In addition, visit this link:

    Secure your wireless network

    http://www.Microsoft.com/security/online-privacy/home-wireless.aspx

    Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

  • Detect the browser and display the message, without PHP?

    My site is not fully functional with Google chrome, still many works in Firefox and almost nothing works with IE (for now), is there some kind of code/script that I can use to detect whether a browser is not Google chrome? And then if the browser is not Google chrome a message appears? I can't use anything PHP, Javascript or something else would be better.

    could someone just help out me with the display of a popup, but only for a browser that is not in a specific list?

    You have no idea how MANY different browser user agents and there are versions?  I don't think you do, or you wouldn't ask that question.   An exhaustive list could continue for pages and still not all cover.

    Let's say that for a moment your site looks OK (maybe not 100% perfect, but OK) in all modern browsers EXCEPT Internet Explorer 6, 7 and 8.  You could use a conditional comment to pre - IE9 target browsers and display a "warning message" then load your page.  Just paste this after thetag in code view.

    
    
    
    

    Purely for the reasoning, suppose that we are in the Bizzaro world (another dimension where everything works in opposites).  Your site works well in all versions of Internet Explorer, but has problems in all modern browsers.  You can use a conditional comment of exclusion like this:

    
    
    
    
    
    

    In summary, I do not recommend the use of browser detection scripts because they are not infallible. Object detection is much more reliable.  To learn more about the reasons, see this article from quirksmode.

    http://www.quirksmode.org/js/support.html

    Nancy O.
    ALT-Web Design & Publishing
    Web | Graphics | Print | Media specialists
    http://ALT-Web.com/
    http://Twitter.com/ALTWEB

  • Ho I can spend iMac Display Mode target without having to always use the command + F2?

    I use my MBP 13 as my driver all day at work, and I use an iMac (initially, the daily pilot) as a secondary screen. I use the MBP to go to meetings and, basically, to expand my mobility at work (which is the reason why I got the laptop in the first place).

    Here's my question, how to optimize the installation so I don't have to use command + F2 on the iMac, whenever I want to thank the poster for the MBP when I plug?

    Thanks for the help.

    You are looking for a shortcut to a shortcut? Sorry cannot be done.

Maybe you are looking for

  • will not synchronize contacts from the iphone, they synchronized some but not all

    so I try to synchronize my contacts sync only some of them, BUT its cuz weird when I go to imessage or text messages someone there in there just its their number or the email not their contact name as in my iphone, and if I add them as a contact, the

  • BIOS update failed on Satellite L

    Hello. I just tried to update the bios of my computer and it failed on step 18.I kept running for hours and had no choice to stop it. The problem is that my computer is unbootable and I can't even start screen. Thanks for your help.

  • Which driver should be used to connect HP 34401 using RS 232

    Hello I'm using labview for the first time. I want to use the RS 232 cable to connect between Labview and HP 34401 multimeter. Which driver should be used for this purpose? Help, please. Thanks in advance!

  • Change of fuse in Multisim print?

    Hello guys,. I met a problem when using the Multisim and Ultiboard (Version 10.1), I use a fuse in the circuit, but the footprint is not editable, when you do one annotation in front of ultiboard, I still need to change the footprint of the fuse. Doe

  • __Windows XP service Pack3 configure error (error 0x8007F070)

    Hello Whenever I have try and install service pack 3 for Windows XP (media edition), I get the error message: "Service pack 3 setup error"."An error in updating your system has occurred""Select ok to undo the changes that have been made. Once I click