Display after the Nvidia update problem

Similar Questions

• connection after the vista update problems

  After that windows vista updates, restarts and configures, I can't seem to login screen. I type the correct password, but the screen only flashes for a second and watch the blue progress ring, but then comes back to the right of the login screen. I have to restart and run system restore just to connect, this happened last week with the same update and is quite a nuisance. Updates include:
  (important)
  Update for Windows Vista (KB971029)

  Windows malicious software removal tool - March 2011 (KB890830)

  (optional)
  Updated the Realtek for Realtek PCIe FE Family Controller driver

  -Input - Synaptics Synaptics PS/2 Port TouchPad

  Windows Live Essentials 2011 (KB2434419)

  Hi Raziel,

  First of all, we will do two important things:

  1. DON'T download or install updates from Windows Update for Realtek and Synaptics (or any other device drivers).  Instesd of get them through Windows Update, go to the computer or Web sites of the device manufucaturer to get the latest update and install instead.  Hide these two Windows updates so they don't mind again.  Unless expressly stated by the manufuacturer for updates from the Windows Update driver, always bring manufacturers instead.  They are the cause of many problems of update.

  2. in prior to starting the updates (and for each 3 other updates and driver updates), create a System Restore Point.  Of allows to install the other three updates one at a time and manually instead of through Windows Update.  Go to http://www.microsoft.com/downloads/en/default.aspx and look for the KB number and download the update appropriate for your version of Vista and install it, and restart and make sure that all is well before you more on the following.  If we have the same problem, use the restore system back out of it and post back here with the specific update that won't install manually as well as any error information, you can find the problem.  If we can reduce it to one, we will have a better chance of coming up with a solution.

  I hope this helps.

  Good luck!

• After the last update problems

  Since the last update, I got very annoying problems of towing. Firefox continues to change my homepage Homepage of Mozilla. So am I looking for new ighome! and then reset the home page. Then it also changes my appearance to the default page. I like the one I have. So, I have to click on use default, then restart the look I want, stop and try again. I want to uninstall and do a clean installation takes time that I have yet.

  Hello

  It seems that a parameter has been changed on your new tab page. These changes are usually caused by bars of third-party tools or modules. I understand that you would like to know how to reset it. No problem, please follow the steps below:

  1. In the address bar, type Subject: config and press enter. The "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise! to keep the comments: config page.
  3. Type browser.newtab.url in the search box to find it on the list.
  4. Double-click on browser.newtab.url and type on: newtab in the window that opens.

  Restart Firefox and open a new tab to ensure that the change has been made. If there is no problem with the plugins please see also: troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  Please post back with your results, we are happy to help you.

• You can turn external display (after the last "update")

  I just installed last updated and I can not turn my external display! There is no option in the settings.
  Moreover, I'm afraid to install any new update because it always brings new troubles - where do you go Apple?

  In help, I found something like "If the drop down menu to display rotation is not available, then the computer did not support this function...". "What? I have set it to level or Downgrade?

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

  I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

  Hello

  Make sure you have the latest network adapter drivers fron toshiba

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  and if windows update is at the origin of the problem change how to get updates to uncover the problem update

  When you have found the issue, a right click on it then invited uac then hide

  read the information on the link below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• After the last update CC visualization and image preview for always (like at dial-up speed placing images in CC apps via site Internet Adobe Stock) - is there a problem?

  After the last update, image display Adobe stock so that it 'charge + connects' Apps take forever (dial-up speed).  Once an image is selected it also takes forever to make it appear in the library of CC in app (i.e. InDesign).  Is there a current glitch.  I already cleaned my cache of the web browser and also used different browsers (Chrome and explore).  Adobe Stock doesn't even work in the error get Chrome and Explorer Adobe Stock pages are broken.

  Have you checked the help Adobe Stock | Adobe Stock learn & support

  Concerning

  Stéphane

• Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hello Gene,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• After the last update, the start photoshop it gets for minutes flashes.

  After the last update or after you install the "fuse" CC, the start Photoshop it gets during the minutes flashes. You can't do anything until it stops flashing. It is impossible to work with him. Because there are times that even after you have opened the file it is as if I had something working and takes too much time to perform any operation. And displays an error message. keeps flashing and press 'ESC' to stop and get something. But still, he said, showing the cursor how had tried to open something in the background. One of the moments where I started Photoshop appeared to show two fields seemed 'user' and 'password '.  I tried to remove and reinstall and nothing... still the same thing.

  I installed a previous version of the application to not stop working. I expect a solution to the problem to reinstall the latest version.

  S.O.: Windows 10

  Hardware: Dell Inspiron 5421 - i7 / 8G RAM / Nvidia GT 730 M 2 G

  Thank you

  L.Roma

  I don't think that's the problem. I solved the problem by using an earlier version, while the youngest is not corrected.

  To install an older version I do the following:
  1. open a creative cloud application
  2. in front of 'Find Apps more' I click on "Applications" and change to "show other version."
  3. I have local "Photoshop" and I click on the 'Install' button and chose an older version, in my case, I prefer "CC (2014).
  4. wait for install and now I work normally.

  I hope this has helped.

  Kind regards

  L. Roma

• After the last update on Wnidows 7 Firefox opens just a blank screen (black).

  After the last update Firefox on a machine Wnidows 7, Firefox opens just a blank screen (black). It worked fine until the latest update. It does not open in "safe" mode I tried several facilities clean and using various other compatibility settings. I also tried various changes of display. Closing X is still under the black forest as I can by conjecture activate this.

  Get a black screen after updating to Firefox 33 can be caused by a problem with hardware acceleration in Firefox.

  You can check if there is an update for your graphics display driver.

  Try to start Firefox in Safe Mode by holding down the shift/Options key.

  Disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Why Web pages show nbsp; all the pages after the last update?

  My operating system is Windows XP. After the last update for Firefox 29,0, web pages started showing nbsp; through, including my home page. I've never seen until the last update. Internet research indicate that this indicates a space when the web page is developed, but is not intended to be displayed. Why am I now see this on most of the web pages I visit? Is there a change or fix that I can install to ban this appears?
  Thank you

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  & nbsp; is the HTML entity for an unbreakable space code and should not appear as text, if you see this on a lot of pages then something like a Firefox extension or other (security software) might be causing such a question.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• Network icon is missing from the notification area after the window updated

  I have some problems about the notification for the network and the volume icon!
  They are missing after the window updates!
  I tried to check the "Taskbar and Start Menu Properties' > 'Notification area', Volume and network are grey which I cannot check these boxes. Grateful if you could help me solve this problem!
  Thank you very much!

  Hi VisBo,

  Welcome to the windows vista forums.

  Please follow the steps below to resolve this issue:

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area.

  For the network icon, you can also do with the registry.

  NOTE:

  Please be careful while making changes to the registry, any undesirable changes can affect your operating system.

  1. click on start.

  2. in the start menu search bar type regedit, and then on enter.

  3 Please go to this location in the registry by expanding each location by clicking on the brand more on the left side.

  HKEY_CURRENT_USER\Software\Classes\LocalSettings\Software\
  Microsoft\CurrentVersion\TrayNotify

  4. remove the keys 'IconStreams' & 'PastIconsStream '.

  5. start the Task Manager by pressing ctrl + alt + delete at the same time.

  6. in the Task Manager right click on explorer.exe and kill the process.

  7. click on applications in the task manage, press new task and type explorer.exe, and then press ENTER.

  Explorer will now reboot and your icons should return.

  Alternatively, you can try to uninstall the most recent update that has caused the problem. You can uninstall an update by clicking on the icon of the program features in Control Panel. Select the update that caused the problem, and then uninstall it.

  You can also make a selection of updates to install by setting the windows updates to notify you before installing an update. To open this Panel, and then click windows updates, click settings.

  I hope this information is useful.

  Please let us know if you need assistance.

  Concerning
  Rehman - Microsoft Support

• Windows 7 Ultimate 64 bit freezes on startup after the last update.

  I think I have updated a major problem with the latest update from microsoft.

  I've been running windows 7 ultimate 64-bit for over a month now, as I received it for a launch party I was the host.

  That's all works fine but a few nights ago, he just stopped from upward, it just hangs at 'Starting Windows' screen, the windows logo does not yet appear.  He would not go into safe mode and startup repair couldn't do anything.

  This happened right after that I had installed a windows update, but I thought that nothing of all this at once, but one of my friends mentioned that their windows vista pc did the same thing after the last update, still, I don't think not that it was bound.

  I had no other way to get the things on my hard drive, so I tried to reinstall windows on top of the old, it does not work either.

  I gave up, I formatted the hard drive last night and just reinstalled.
  Microsoft Windows 7 Ultimate 64 bit,
  NVidia graphics driver
  Microsoft Security Essentials,
  Microsoft Office 2007 Ultimate,
  Apple's iTunes and Quicktime.

  The computer worked so very well, so this morning I came back to it, it was working fine, there was a box saying that a windows update was waiting to be installed, I clicked it, it was of course a big one because it was the first for this new install to get.  When he asked me to restart, I did, he went through his usual routine and now, as I sit typing this, I am facing screen "starting windows" frozen again.

  My processor is an Intel Pentium D
  I have 4 GB of RAM.

  There is obviously something wrong dangerously with the last update of windows, were there any other reports of this?

  Too, I recently had problems with Win 7 freeze on me. After you have uninstalled all the updates I had installed on 24 December 2011, 1 update could not be uninstalled and it was the update to sp1 of windows 7. After you have uninstalled all updates (except SP1 cause could not be uninstalled) I tried to play again the media and my system hang or aka freeze for a few seconds, and this happened even when I was gaming.  I had a lot of problems after that update, including any media type of videos to play just thrown music windows media player. After restoring my computer to a previous state (before that the updates have been installed) now my computer works normal again. So, for those of you having problems with windows and your way of thinking too yourself Uggghhh, why he did this? Well this is the service pack 1, windows now, I don't know any alternative to restore your computer to an earlier date before the updates took place, and if you don't have a win 7 is pretty smart and im sure they have a restore to the factory settings. These are the only options that helped me get rid of my system hanging up. I hope this helps some people and I'm sorry I can't guide you threw it and the steps how to restore your comp because of parameters factory all the comps are different.

• Icons, windows and adobe acrobat toolbars are very large after the last update

  Im having a problem with the last update of acrobat pro, toolbar, windows, and icons is very big after the last update. how re its size?

  https://www.dropbox.com/sh/pbd33n1q2wirpq3/AABHjSRXo-crpYGVLaOrB2FVa

  Please check the doc: Hi DPI, support Retina display. Acrobat, Reader

• After the last update (December 16, 2013) first CC doesn´t beginning. Why?

  It's a huge problem for people like me who work as a Publisher!

  Just after the last update, first crash whenever I try to open it.

  I have a mountain of laptop:

  16 GB of ram

  NVIDIA GTX 670MX

  Intel I7 3630QM 2, 4 GHz

  WINDOWS 7

  If anyone has an idea please tell me...

  At the moment I just uninstall first and will intall again through Adobe Cloud but I fear he will do the same.

  Thank you

  I reinstall first cc, but it did not work!

  I've finally updated my graphics codec and windows 7 and it worked...

  I guess it was because of the graphics card.

  Thanks a lot for your answer.