Display dialog popup to step to the sequence type

Similar Questions

• can see us line numbers next to each step in the sequence file?

  Hello

  I have a file of sequence having 600 steps. I would like to know is there any option to the test to set number for each step in the sequence of line editor so that it is useful for the review.

  Example:

  1 Action1

  2 Action2

  ............

  600 Action600

  Kind regards

  Krishna

  Krishna,

  If you want just to know the index of a step, this information is displayed at the bottom of the sequence editor in the status bar.  It shows you how many steps there are in the sequence, how you have selected and the index of the selected steps.

  

  It is also possible to display the information in the view of the steps in a column, if you are ready to create a new column.  Follow the instructions in this KB to see how to create a new column:changing the properties of columns in the viewport of execution TestStand sequence editor.

  One of the types of columns is Index. Just set your column of this type and you'll see step index as shown below.

  

  

• Whenever I have shut down my computer, it displays a popup saying to close the background image and then it stops.

  Original title:

  Whenever I have shut down my computer, it displays a popup saying to close the background image and then it stops. Should what settings I change so that does not happen?

  Hello

  1. What is the brand and model of the computer?

  2 have you made any changes to the computer, before the show?

  Method 1:

  Perform a clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 2:

  Change the wallpaper and check.

  Change your desktop background (wallpaper)

• Pass / Fail step post action - option to retest step / fail step / interrupt the sequence on the failure.

  Hello...

  In my main sequence there are a number of Pass / Fail steps, before it a statement indicating an operator to connect cables, etc.

  What I want to do;

  If after the execution of a step, the result is a failure, we would like the opportunity to test again, or, fail step and continue or interrupt the sequence (in case of operator forgetting to plug one USE properly etc.)

  I'm a little out of my depth here in terms of how we could set this up in the "step > properties > Post Action" to give us these sort options, or if there is a different way / better make it quite.

  TIA.

  Jim.

  Do not use the Action.  There is a recall for this thing.

  This example shows what you are looking for:

  http://zone.NI.com/reference/en-XX/help/370052N-01/tsexamples/infotopics/callbacks_sequencefileposts...

  I would like to know if you have any questions on this subject.

  Hope this helps,

• Use the same code module to multiple steps in the sequence

  Hi all

  I tried to implement a sequence that uses the same code for all steps module in the order, but I'm not returning to it when I need to send it commands.  I got regarding the appellant the VI in a new thread so that it can be executed asynchronously.  I can run the simple sequence and it will indeed open the VI and move to the next step.  When I close the VI manually from the front, the TestStand sequence is completed, as planned.  So it turns out that I have a lot more work.

  My question is how to call the thread separate from the main sequence and other sequences overtime when I need to change the settings.  If I insert a step in the Action, I have to select a file of VI, but from what I can tell, it opens another instance of the file and does not provide an interface with the other asycronously running instance.  My next guess was to use a stage of education, but I was not able to understand how to configure the search string to call the VI settings.  In addition, I don't know how to proceed.  Please notify.

  My intention is to start the module code (asynchronously) VI, run several different subsequences in the main sequence, which call this same VI and edit its settings, close everything and report the results.  If I'm understand how TestStand is supposed to work, please let me know.

  Thank you

  GSinMN

  What I do is use a queue to send data to the asynchronous VI.  So he can run and whatever, but also receive orders from the queue.  I use a motor of Action that contains the reference to queue and sends the commands.  If you really just call the engine of the Action of your sequences.

• the steps in the sequence display

  Something has changed in my Teststand that what I used to see every step in my file of sequence, as he was running in mode single pass

  but now it does not show every step.

  Is it a setting or a configuration that I need to change in order to see each step as it is running in my file Seq?

  Thank you

  robojeff,

  Try to configure > Station Options > Performance tab, then make sure that tracing is enabled.

• How to read the additional results of each step of the sequence of my main in LabVIEW?

  I'm working on the creation of stylesheets for TestStand reports. I do this by allowing the user to select additional results in every step she wants to see in the report in a LabVIEW edit stage. I can read the names of each stage, like in the picture as an attachment, but I can't access their (children?), additional results.

  I think that I thought about it, I guess that I had tried everything. The solution is something like the joint. Thanks for the suggestion!

• How to create ProcessModel calculate TOTAL as follows to call the file in the sequence?

  I made a custom operator Interface and I want to support a progress bar for giving the user indicates to what extent this time they represent.   I already have the infrastructure of reminder Setup so that the progress bar will be updated based on a Message from the user of the motor.

  In the process template itself, I put in place a "ProcessModelPostStep" (the purple one) reminder so that after all the steps of the calling sequence file I increment an internal counter and send these data as well as the Message of the user.

  The only missing part is to know how to calculate the TOTAL number of steps in the sequence file calling.  I can get the total number of SEQUENCES defined in the calling file but I how to recursively on each sequence loop excluded from top down by counting all the steps of the sequence of the callee.

  Appreciate any help in getting this last piece in place.

  Thank you!

  I have a better solution in the images below.  The code snippet is the code called by TestStand to introduce recursion.

  The attached code is the recursive call.  It is similar to my first post, but the fixed a bug with the cast of references.

  This should get the total number of step.  The code works under some assumptions:

  1. all called sequences are in the same file in sequence.  (You can add steps to also get the path to the movie file and retrieves the sequence from there.)

  2. There is no asynchronous LabVIEW step in TestStand.  (These are treated as sequence calls into the API, and you must add code to sort.)

  

  Pulido Technologies LLC

• No icons shown in the sequence editor (Teststand 2014 Windows SP1 + 10)

  Hello

  I have the problem in the followig:

  After installation of Teststand 2014 SP1 on a computer Windows 10 empty, no icons are shown for the steps in the sequence editor. In addition, the breakpoints do not appear by clicking on the left side of the stage. Icons, which uses Teststand are in C:\Program NIUninstaller Instruments\TestStand directory 2014\Components\Icons, nothing is missing.

  Everyone knows the same problem?

  See you soon,.

  Roman

  

  Hey guys, so I finally found the solution to my problem: change the Format of the region of English (Europe) to English (United States). Thanks to Scott for an idea!

  I'm really curious to know what kind of bugs are hiding there, where Windows 10 meeting OR software

• When the sequence of process template client file is loaded for execution?

  As part of a custom process template I've created, I would like to make a few changes in the sequence of the client before file called by the process template. These changes will be then be restored after the loop finishes USE (I'm changing the sequential model).

  Another thread, I discovered that TestStand sequences cannot be edited structurally once they have been loaded for execution. My question is: what is client sequence template process ' for execution "?

  After some research, I discovered that the sequence of the client file is not locked to prevent changes to the sequence editor until the "Reminder of the main sequence" sequence step call runs in the model process entry point. At this stage, the sequence of the client file is loaded dynamically as the module at this stage.

  However, before this point, there are two places that the file of the client's sequence is used, and I want to assure you that they don't 'load the customer file for execution.  The Runstate.ProcessModelClient property is a reference to the object the client file SequenceFile and exist as soon as the entry point is called. In addition, the engine must know about the sequence of the client file to correctly call reminders of process model. Do any of these things make the movie of 'responsible for performance customer file?

  It boils down to this: can I do safely from the structural changes to my file of sequence of the client during the ProcessSetup and ProcessCleanup?

  According to the information I found in another post (see the comments of Eric_Crank on page 2), it is allowed. However, in this case customers were only make changes to the property Data of the RunState.ProcessModelClient. I want to assure you that I can use the TestStand API on the reference too.

  Also, just FYI, I got this works. I can add steps to the sequence MainSequence customer sequence file of the group stage of installation of the point of entry of the process model via the API TestStand. I ask here if make sure that it is a safe thing to do, and that there is nothing I plan not to.

  Thank you.

  Josh,

  If your sequence allows the option "optimize no concave calls this sequence", the first time the sequence run TestStand stores a copy of the execution of the sequence in a cache associated with running. As long as the sequence is in this cache you can not change, and TestStand considers that the sequence for 'run' file (see the SequenceFile.IsExecuting property). You cannot unload 'enforcement' sequence files (see SequenceFile.CanUnload). Sequences remain in the cache until it is closed. There is no way for you to remove the sequences of this cache, but you can prevent them to be added to the cache by turning off the option "optimize... ». Disabling this option should have no impact on the performance that you call the sequence only once.

  -Erik

• documentation for the sequence file report does not display the parameters of the step

  The parameters of the step is missing in this report. Is it possible to add this just as you have included the sequence settings. Thank you.

  Sequence: MainSequence
  Type: Normal
  Disable the results for all stages: false
  Goto cleanup in case of failure: use the Station Option
  Number of installation steps: 2
  Number of steps: 10
  Number of steps of cleaning: 2
  Parameters:
  PartNumber String (by reference)

  -Stage: Installation Instruction
  StepType, adapter: Message Popup. 
  Description: NameOf (Step)
  Module loading and unloading Options: preload the beginning of execution, discharge the closure of movie file
  Record results: disabled
  Flow properties: Post Action:
  If)
  GoTo
  Record result: disabled

  I agree that it's frustrating.  I had the same problem recently.

  You should post it in the forums of idea: http://forums.ni.com/t5/NI-TestStand-Idea-Exchange/idb-p/teststandideas

  Or you can change the sequence that generates these and include parameters.  The source so that it is in: \Components\Tools\DocGen

  Hope this helps,

• computer will display a popup whenver restarting the computer, it says that mchd.exe is a problem

  Hello

  I have problem with my computer, when I start the computer it shows "computer will display a popup whenver restarting the computer, it says that mchd.exe is a problem" this error message and if I insert the USB the computer does not recognize the USB.

  Please let me know ASAP troubleshooting steps.

  Thank you & best regards

  Sashidara

  Hello

  I suggest that you start your computer in a clean boot state and check if the problem persists.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the link below for more information on the clean boot troubleshooting.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• By program the Sequence value call step

  I have code (LV 2015) that weights a step in a sequence of TS (TS 2014), changing the sous-séquence judicially.

  The code works, but an error is thrown (which indicates the resources have not been released), and ultimately, LabVIEW crashes.  Strangely, the resources that it ' complain is that I have not consulted.

  Here, we the offending code:

  It is the conversion of the reference Module to a SequenceCallModule which seems to be the cause of the trouble.

  Here is the dialog box that appears:

  

  Here we the full text of the error:

  References to PropertyObjects not released correctly.
  Total number of objects: 1024
  Number of objects at a higher level: 17

  Note: Some higher level objects can be included if they are referenced by
  an incorrectly released top-level object. For example, a new
  SequenceContext object is a reference to a SequenceFile object.

  The following top-level objects are not set:

  Definitions of types [5 or objects not published]
  Definition of type #1:
  Name: SeqCallStepAdditions

  Definition of type #2:
  Name: SequenceArgument

  Definition of type #3:
  Name: NI_SequenceParameterResult

  Definition of type #4:
  Name: Expression

  Definition of type #5:
  Name: path

  And the following unclassified objects:
  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  SequenceCallModule (SeqCallStepAdditions)
  Name: surlabasedesdonneesdufabricantduballast

  Can someone tell me what I have to do the release of resources after changing a call sous-suite?

  I don't see a close reference to the Module or the step objects.

• Popup message when the charge of the sequence

  Total newbie to TestStand, first post

  I noticed that the Bill to open some of the example TestStand sequences will cause a pop-up message displays describing what is talking about the example. I am trying to understand the source of this message. It is not in the sequence steps.

  Thank you!

  Welcome to the forums, Jim,

  It will be displayed in a callback.  When you have the sequence example open, you will notice that there are a few sequences in the part of the sequence that are a different color (purple kind).  You add the reminder that your sequence and edit similarly to the way the example was published.

  GSinMN

• Parameters specified by step do not match the settings of the sequence

  I just upgraded from Teststand 4.1.1 to 4.2 and have encountered this

  problem during the review of the existing sequence files.

  When I open a file of sequence, select any stage of type sequence call, which calls another sous-séquence

  in a different sequence file, I learned that the parameters used do not correspond to those required.

  To be more precise, in the settings area of the stage, a red exclamation symbol appears at the side of the

  subsequence called step, and the ToolTip is displayed when the mouse pointer is

  hovered over the exclamation point States:

  "Parameters specified by the step do not match the settings of the sequence."

  The ToolTip goes on to explain how to solve this problem by clicking on the exclamation symbol.

  I find also that by deselecting the "Prototype using sequence" tab in step Settings\Module

  solves the problem.

  When the sequence is executed, no problems occur with execution, the test performs correctly.

  Is it possible to clear this error for each sequence call not in one operation?

  Thank you

  Gary.

  My apologies to attach a file of sequence buggy. I forgot to pass a parameter to the LoadPrototype method to preserve existing settings. I have attached a corrected version of the sequence file. I changed to update SequenceCall not only because of potential problems, reloading the DLL prototypes.

  I would try to explain why you see cela TestStand 4.2. The additional results feature, we added to TestStand 4.1 needs to know what parameters are entered, output and input/output (i.e. what settings is pass by reference). Before TestStand 4.1, step of calling sequence does not store this information but rather dynamically got it and it appears in the column how go. Now that we store the past by reference with the step option, you can have an inconsistency between the option stored in step and the current setting of the sequence called. This inconsistency affects only additional results and not execution. TestStand 4.1, the sequence editor to not warn you on these inconsistencies. We have added the TestStand 4.2 warning so that you will have the correct information for additional results.

  When TestStand 4.1 or 4.2 load a file of sequence from a pre-version 4.1 version, TestStand sets cervical optionally reference true for all parameters in the call sequence steps. This is why you see the warning for any sequence calling step created TestStand 3.5 If no parameters are not passing by reference. You can also see the problem if you change the option collar called a reference parameter in the sequence.