Display driver cannot complete installation on Qosmio G30-137

Similar Questions

• Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) (see downloaded the image)

  Cannot complete installation of Firefox 34.0.5. The installer of Mozilla Firefox crashes at the creation of shortcut (.lnk Mozilla Firefox) on the status bar of the installation window. OS: Windows 8.1 system had old version of Firefox, but is no longer in the list programs. There is no file helper.exe manually uninstall any previous version or remnant of an older version, but I don't have folder C:\Program Files (x 86) \Mozilla Firefox to. Thank you.

  Try this:

  • Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/
  • Start the installation by double-clicking on the desktop icon

• Windows 7 cannot complete installation, halfway, it stops and gives me the message "windows Setup could not configure windows for the hardware on this computer.

  Windows 7 cannot complete installation, halfway, it stops and gives me the message

  "windows Setup could not configure windows to run on a hardware on this computer.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Qosmio G30-137: how to change the English language OS?

  Hello!
  I just bought Qosmio G30-137 of the Germany and he has Windows Xp MCE in German language.
  The recovery disk is also in German also. I would like to know if someone can provide me with the recovery in the English language disc or can someone tell me step by step what I need to do to make a format for install Windows Xp MCE version in English and what programms I probably need because I'm a newbie...

  The laptop has also two HARD drives with RAID technology.
  I can't wait to hear promptly.

  Hello

  Windows was delivered in German language, because you bought in Germany. You cannot change the language to English without the recovery or the original version of the Windows operating system English English CD.

  You can install the original Windows operating system but before you install the new OS you need to install the RAID driver.
  Check out this FAQ from Toshiba document:
  http://support.toshiba-tro.de/KB0/TSB56012H0001R01.htm

  See also the similar topics:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8076&MessageID=30452#30452
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=4603&MessageID=15170#15170

• Recovery does not work wth my Qosmio G30-137

  Hello everyone, I have big problems with my Qosmio G30-137. I tried to put the system in the State of origin using the recovery disk. After booting from the floppy, the procedure starts as usual and gets to the language screen. Then the trouble begins. After selecting the language the error next watch-up and the process breaks. The worst is that the computer starts not more that a recovery is critical.

  Error message:

  IOCTRL_DISK_GET_LENGTH_INFO.------ ------PHYSICAL DRIVE 0
  The device is not ready

  It seems that the software can not see the drive. However, in the BIOS, both drives are visible and shown OK. I put the raid parameters to different options and I also tried swapping hard disks or restore with a single disc. Nothing worked! Panic mode...

  Thanks in advance!
  Frank

  Hallo Frank

  Have you tried to boot from another bootable CD/DVD?
  Try please use Microsoft WXP / Vista CD/DVD facilities. It will be interesting to see if the facilities procedure ends on the same point.

  But in my opinion, there is a problem with the HARD drive.

• Qosmio G30-137 - video card problem - the bug of vertical lines

  Hi members,

  Today my Qosmio G30-137 started to make trouble showing vertical lines that look like this:

  ''''' ''''''' '''''' '''''''
  '''' ''''''' '''''' '''''''

  After having used the product Windows disk recovery could not start early and came up with a blue screen with the error code:

  + failure of page in the nonpaged area STOP 0 x 00000050 (0xC09C3044, 0x00000000, 0X804DA90AA, 0 X 000000002) +.

  Basically, this indicates that the RAM - memory Cache L2 or preserved is dead. But I also learned that the graphics card can be smoked.

  After the blue screen, you will not get the system to normal operation, no matter what you try.

  I strongly advise to check if your Qosmio is under warranty and see your reseller for Exchange. Fortunately I bought mine 2006/06/06 so its still under warranty (even if only a left view days).

  Additional information: another Member of this forum has had a similar problem and noted that the entire motherboard must be changed causing costs of USD 700.00 and more!

  I will let you know what I found myself with.

  BRgds
  The Q

  Unfortunately, this sounds like a serious problem of material as other members suggested, the GPU (graphics card) may be defective and therefore replacement is necessary.

  The point is that the GPU is soldered on the motherboard and it of not possible to remove the graphics chip of the card. In most cases, the entire motherboard must be replaced to solve graphic problems.

  In my opinion, you should contact your ASP as soon as possible.
  Technicians should be able to help you to explain the situation and to issue and ask for later handling.

  Good luck buddy

• Cannot install driver Win7 TV in my Qosmio G30

  Hello world

  In my QOSMIO G30, I changed my OS to W7 64 bit.
  I downloaded the driver for this OS TV, but I can't install it. Windows says: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Please, anyone know what driver I need?

  Thank you

  > I downloaded the driver for this OS TV...
  Can you please send the download link?
  I checked the Toshiba download page and can't find it. Maybe I m doing something wrong but I can see this old laptop Qosmio is not supported for Win7 64 bit.

• I don't see that drive HARD install Win7 in Qosmio G30

  Hello world

  I tried to install win 7 64 bit in my Qosmio G30. The first problem was when, in the early stages, Setup did not find hard drive. Exactly, he told me that any pilot has been found. logically, if it does not find the drivers, including the hard disk drivers that I couldn't install win 7.
  I see the hard drive in the BIOS, but I can't change its configuration. It is as if it is locked

  Worst of all is that I'm trying to take the win XP but I can't start the operating system. The message is: ' Could' open drive.

  Please, do you know what is the problem?

  Thank you

  Before you start the installation of the OS you need to load the SATA driver. Check please download from Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp page if you can find it here. If this is not the case, let us know.

  I can't find it for you because I know what Qosmio have you (PQG30E or PQG32E).

• Installation of Qosmio G30 problem

  Hello to all the boys

  I have a huge problem

  I have a Qosmio G30, recently he repeats, or used the disk, format it, confg. RAID, it will restart the formatting begins, ends will restart and the problem here.
  Resuming at the end of installation, which occurs not because the video driver crashes (nv4_disp). So, every time I turn on the PC are always half installation.

  I ask for help! And while we are to what you enter into the BIOS of Toshiba Qosmio G30.
  Thank you

  To be honest, your assignment is a little confusing for me. If I understand you right, you want to install own OS, right?

  Are you using the original recovery for the OS installation disc or you try to use the clean version?

• Audio driver for Windows 7 required - Qosmio G30

  Best of all,

  I am Spanish. I have a Toshiba Qosmio G30-198. I installed "Windows 7" and ok.

  The only thing the map its (Sigmatel STAC9200d) does not work with this system.

  I install drivers of procedures of the 'Vista' and the 'XP' and nothing.

  Does anyone think how can I make it work?

  Thank you.

  Hello

  And why does the Vista driver not work? Normally the Vista drivers are also working on Windows 7, so maybe you should check it once again!

  Also try installing the driver in compatibility mode. Run the installer as administrator and Vista mode.

• Cannot complete installation of Windows 7 OEM on Precision T3400

  Can someone help me?

  I try to do a clean install on a Dell Precision T3400 with Windows 7 64 Bit OEM, but cannot complete the sequence.

  It goes through the sequence of the whole installation, restart a couple of times. He gets in the beginning of the sequence as "complete installation" - contribute to what, according to me, it's the final reboot - and then crashes. I think that what should come next is the bit where to enter information first name of computer use - time, date, place - time etc. I never get that much, however.

  I have not updated the BIOS. Previously Windows Vista - but the disk has been deleted - not sure if I can update the BIOS in this State.

  Another thing - I swapped the graphics card. The monitor of works well during the initial installation sequence.

  Any suggestions?

  Thanks a lot for reading.

  The suggestion above about SATA drives didn't really solve my problem, but it got me thinking in the right direction.

  Here's what I've learned about this through the answer and the answers on other forums above. It turns out be a common problem:

  It is usually caused by the lack of drivers for devices that are connected to the computer. Devices can include: any type of USB device (may be same mouse or keyboard), any type of hard disk, graphics cards and other types of cards such as PCI or PCIe Firewire. If you have a SCSI card then remove it permanently.

  I had a Dell keyboard with built in USB ports and a Media Player control. I swapped it for a simple vanilla ordinary keyboard.

  I also already swapped the graphics card that came installed on the T3400 for an older NVidia Quadro card as a fix for compatibility with my older monitors SVGA adapter.  When I searched on the NVIDIA site, I discovered that there is no Windows 7 driver for my graphics card, so I bought a DVI - I adapter that I needed the original card and replace.

  My problem turned out to be the graphics card.

  On other forums I have seen people solve the problem by removing the USB devices all THE. If you have a keyboard and a USB mouse, this may seem to be a problem. However, once you have initialized the windows 7 install process you can remove the keyboard and the mouse. Whenever the computer reboots it page and warn that any input device is fixed, but after a short pause, he must continue with the installation procedure. In my case, the fancy USB keyboard was certainly a problem too. Disconnected after initialization of the installation allowed the installation of two additional steps.

  I curse me Microsoft about this problem, but to be honest, I was not able to run a compatibility test of windows 7 on my computer. I bought it on ebay without an operating system. If I could perhaps it would have marked the graphics card problem and composite USB keyboard device.

  Don't know if it will work, but if you can't figure out what your driver problem, you can be able to run a hardware compatibility test and periperhals by a temporary installation of Ubuntu and connect it to the Net. I had no problem to boot Ubuntu from a USB key and the connection to the network.  It works perfectly first time without any of the usual shenanigans of Microsoft. In my opinion, Ubuntu is an operating system much higher with a much nicer user experience. My only reason to stick with Microsoft's older software. It's highly unlikely that I will ever consider buying a new system from Microsoft again. They lose the pedals after XP.

  Good luck

• Cannot start windows on Qosmio G30

  Hello

  I have a Qosmio G30 and I can't start windows XP MCE. When I start the computer, I see first is the screen "Qosmio" and there is no problem but when Windows starts, I see the logo and the background is filled with white dots. After that, windows logo disappears and the lines is still there. Finally, the screen goes black.

  I formatted the computer and reinstalled windows, everything worked fine until I rebooted. Unfortunately, the problem is still there.

  I can connect to windows if I hit F5 when booting up and then choose "safe mode".

  What can I do?

  Hello

  Have you installed the operating system from the recovery CD delivered?
  I asked because it sounds a little like a graphics card or graphics driver problem.

  > I can connect to windows if I hit F5 when booting up and then choose "safe mode".
  This is possible because the graphics driver is not loaded in windows safe mode and OS uses the common Microsoft driver.

  I would recommend the boot safe mode and then delete the preinstalled graphical driver.
  The new driver can be downloaded from the page of tosh.

  But if this procedure doesn't help and the strange lines appear again, I guess that the malfunctioning of the graphics chip
  In this case the laptop must be checked by a technician

• Cannot complete installation of Live TV. Media Center will not identify Directv remote. Is there a solution?

  I have a Dell PC with Vista Home Premium.  Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv.  I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized.  The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?

  Hello

  You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
  will have need a HDCP compatible graphics card and a TV/monitor taking support this
  as well.
  The kit Hauppage offers is substantially the same as I told you.

  clear QAM availability varies according to the cable company. most begin to encrypt
  everything.

  > The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-cant-detect-dvrset-top-box-but-finds/43a9685d-d093-4cfa-88ac-17132a1e5b53

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://Windows.Microsoft.com/VI-VN/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-will-not-set-up-TV-because-Windows/5c038734-7bb6-48D4-AAC9-f4dee9a3d442

• Cannot be used on Qosmio G30 recovery CD

  Hello

  I'm doing a recovery on my G30 and have recovery G30 dvd but when I insert the disc all get them is a message saying - this recovery and applications cd is not configured to work with this machine (laptop).

  This cd is for: Qosmio G30... Please use the correct CD recovery and applications.
  However my computer is a G30, go figure?
  Does anyone know what the deal is?

  Cheers, Thomas

  It seems that you are using a bad recovery CD or is not compatible.
  Have you used the recovery CD from Toshiba that came with the laptop?

• How to use the memory shared to my Qosmio G30-137?

  Is it possible to use my G30-137 shared memory? I've updated to 4 GB of RAM but my XP 32 bit just use 3 GB of them.
  So I have 1 unused GB... and I thought that now I can use this 1 GB for grafic

  THX

  As much as I know laptops Qosmio isn't a shared graphics memory. Your laptop's graphics card nVIDIA GeForce Go7600 FX with video 256 MB of RAM.
  There must be another reason for wrong info RAM on your Qosmio laptop.