"display driver nvidia windows kernel mode driver version 310.64 not responding and has successfully recovered"

I always get the following error message "display driver nvidia windows kernel mode driver version 310.64 stopped responding and has successfully recovered". It sometimes lets my screen refresh but often he kills to the video out all together and I have no choice but to hard restart my system. I did the thing to uninstall/reinstall Nvidia, Dell and Windows all with no success. I am running windows 7, graphics Nvidia Gforce GTS250 in a Dell XPS420. Any ideas out there are appreciated!

Your Dell was origonally supplied with Vista, there is no win7 drivers available from Dell.

All drivers obtained through windows Update are generic drivers.

I also assume that its a Nvidia card you have purchased.

Account these two elements that he may very well be an incompatibility with drivers problem, for which there is no resolution on the current hardware

Tags: Windows

Similar Questions

  • NVIDIA Windows Kernel Mode Driver display driver, Version 186.81 stopped responding and has successfully recovered

    "NVIDIA Windows Kernel Mode Driver display driver, Version 186.81 not responding and has successfully recovered."  I get this message as I installed Windows 7 Ultimate, it is only slightly different than the error message that I had with Vista, please help!

    If you have a desktop machine, download the latest drivers from here...

    http://www.nvidia.com/download/index.aspx?lang=en-us

    If you have a laptop computer, contact the manufacturer of the laptop as they are responsible for private pilots, you need... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

  • NVIDIA display driver stopped responding and has successfully recovered

    HP Pavilion Media Center m8330f

    Is come with Vista I installed Windows 7 Ultimate 64-bit

    NVidia Geforce 8500GT

    Updated the driver Nvidia 301.42 from NVidia site, it was fine for about 5-6 days then yesterday the screen became all glossy and black, then comes back to the top with this message:

    Display driver NVidia Windows kernel mode driver version 301.42 stopped responding and has successfully recovered.

    But it is not recover for a long time.

    Today, I got the dreaded blue screen.

    I did a system restore and got rid of the graphics drivers from Microsoft, removed from the NVidia graphic card from Device Manager and started with just the Microsoft drivers that are version 8.17.12.9619

    Having been well for an hour or two, I start to see the little sparkles (pixels) flashing on my screen.

    Since I have updated my OS, HP has almost nothing to help me to update, I hope someone can help me with some suggestions.

    Thank you

    Ann

    Thanks for your reply.

    I could finally find a newer driver from NVidia and did install clean without having to install the 3D part that does not have the 8500GT and it was fine, so I guess I can say that the problem is solved.

  • NVIDIA Windows Kernel Mode Driver, Version display driver (I tried three different versions) has stopped responding and has successfully recovered

    NVIDIA Windows Kernel Mode Driver, Version display driver (I tried three different versions) has stopped responding and has successfully recovered

    Hello
    I have an old 1255ee HP HDX 16, I tried everything to fix this, I tell EVERYTHING, but I have still the problem is the things that ive tried:
    1 reinstall the driver
    2 - fresh installation of the driver
    3-3 different versions of the driver
    Format 4-complete
    5. change of ram
    6 overclocking
    Question 7 - N ° heating/voltage
    8 - changed a few settings in the nvidia as control panel change my processor Physx auto to mine, Nvidia GeForce GT 130 M, adjusted image of quality, performance, management mode of power to prefer performance max.
    9 - went to performance of advanced system of control configuration\systeme setting option and Security\System and ive set it the best performance.
    The last of them has fixed the problem where some games like World of Warcraft and League of Legends showed the depth of 16-bit instead of 32-bit color
    Sorry for my bad English and thanks for reading this.

    I don't know what you have installed, but HP lists only single display drivers 8.15.11.8644A out on 09/01/2009

    It seems that you install either Nvidia graphics, and if you had looked at the Release notes you would see it is a driver for reference only and may differ the driver provided by the manufacturer of your laptop.

    So I guess you can install other drivers via update of windows, which is a no no.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3924886&prodTypeId=321957&prodSeriesId=3884578&swLang=13&TaskID=135&swEnvOID=4063#11360

    If you have problems with some games discovers that games makers site and forums for recommendations

  • Display driver stopped responding and has successfully recovered

    Hello

    Yes, I know, there are discussions and topics about this problem here, but I read some of them and none of them helped me to solve my problem.

    CPU: intel i5 750 2.66 GHz

    motherboard: gigabyte p55-usb3

    VGA: sapphire radeon hd5850 toxic

    RAM: geil 2 * 2 GB ddr3 1333

    Ok. When I go to apply 3d in win 7 64 bit, after a few minutes, the screen freezes and the program crashes and I get this:

    «"" driver AMD display driver stopped responding and has successfully recovered.»»» » »

    I had this soccer10, assassins creed 2, crysis warhead, benchmark of sky, nba 2 k 10, etc.

    things, I did and did not help: I reinstalled programs, reinstalled windows, all drivers updated, update the bios of the motherboard and vga, windows update, checked the hardware, cooling systems, etc...

    I know it seems like a hardware problem, but since I don't get it in win XP, I think it's a windows problem. See, I played assassins creed 2 on higher graphics options (60 fps) for many hours, I have same finieshed crysis warhead with keen twice under XP. No problem.

    but in win7, I always have this error even in circles low, and when the vga is 40 to 50 degrees Celsius.

    Thank you

    Hello

    Check with Sapphire Support and Forums (for the known issues and solutions) and drivers.

    Sapphire - Support
    http://www.sapphiretech.com/presentation/support/?PSN=0002

    Sapphire - drivers
    http://www.sapphiretech.com/presentation/downloads/download_index_01.aspx?PSN=0006

    Sapphire - communities and more
    http://www.sapphiretech.com/presentation/Member/member_index.aspx

    ==============================================

    Try this even if you did similar before.

    Download the latest version of the driver, but DO NOT install it again.

    Start in Safe Mode - press F8 several times.

    Panel - Manager of devices - graphics cards - click on - UNINSTALL - check of control
    REMOVE DRIVERS

    RESET

    Now go to where you put the drivers and click right on - RUN AS ADMIN.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • P70 Intel HD 530 display driver igfx stopped responding and has successfully recovered.

    Once or twice during the day I get a black screen and then a notification Windows 10 saying "display driver stopped responding and has recovered.

    In which case the log, the following event is recorded: "display driver igfx stopped responding and has successfully recovered."

    I updated the Intel graphics driver via windows 20.19.15.4352 mechanism and the frequency of the message seems to be reduced. However I understand 3-5 times a day.

    Go to control PANEL, then select MANAGER of DEVICES. Then select the selection of GRAPHICS cards. You should see Intel(r) HD GRAPHICS 530 and NVIDIA QUADRO M600M. For each, open (by double clicking), select UPDATE DRIVER and select SEARCH AUTOMATICALLY for UPDATED DRIVER SOFTWARE. There should be updates for each.

    When both are installed, stop and restart. After the reboot, you may need to go into control PANEL, then select NVIDIA control PANEL. Select MANAGE 3D SETTINGS. Under FAVORITE the CPU GRAPH, select SELECTION AUTOMATIC, and then click APPLY. (If you are still running on AC you can choose NVIDIA PROCESSOR HIGH PERFORMANCE).

  • Dell XPS 15 "display driver igfx stopped responding and has successfully recovered."

    Hello

    About 3 - 4 times a day while working, my computer hangs for 1 - 2 seconds and I get a message saying my display driver crashed and has fully recovered. In the event log, I see a warning saying:

    "Display driver igfx stopped responding and has successfully recovered."

    I have a Dell XPS 15 10 Windows running with the latest updates. It has a Intel (r) HD 4600 Graphics and an NVIDIA GeForce GT 750 M graphics card. I also use a Dell D3100 3 USB docking station, however I notice the issue with and without this used.

    I tried to install the latest drivers for the NVIDIA card. I am currently using "10.18.13.5906".

    Any ideas on how to solve this problem?

    See you soon,.

    Mark

    Latest drivers work for me, Yes.

  • Qosmio X 500-driver stopped responding and has successfully recovered

    Display driver stopped responding and has successfully recovered!

    Is it someone who has this problem on the Qosmio X 500 with NVIDIA GeForce GTS 360 M graphics card?
    This error has become usual, for me it is 5 to 10 times a day. It happens more often on the navigation on the web. Screen went black after 3 seconds is recovering and then displays error "display driver stopped responding and has successfully recovered."

    Concerning

    I noticed the same thing on my Satellite P500 with NVIDIA GeForce GT330M. I believe that it's happened twice in the last 6 months of navigation. I really don't understand why this is happening.

    Fact is, after the driver puts everything worked OK again.

    Have you noticed if a specific web page is open when this happens? Another reason why this could happen?

  • display driver nvlddmkm stopped responding and has successfully recovered

    So, about a week ago I checked the nVidia website to see if there was no news available drivers for my card (XFX GeForce 9600 GSO) and there was. Installiation was simple then a restart. After reboot, I thought that I would play Call of Duty 4 and after 5-10 minutes of play my screen goes black and it appears with a small warning sign in the region of noticfication "display driver nvlddmkm stopped responding and was recovered successfully."

    The pc will be a blue screen with a nvlddmkm.sys error or it goes off and nothing will work
    forcing me to turn off by the power button. I had never met moyenessentiel before you install the latest drivers.
    After looking for some fix on google, I couldn't find
    something solid. So I opened the Device Manager and clicked on graphics cards
    and redeployed the pilot.
    Still no luck. Most of the games I played this error still appeared. I tried all the drivers on the nVidia site
    that are suitable for my card. The drivers on thecd also included witht that card and they do not seem to work either.
    I installed the drivers with Windows Live OneCare disabled, disabled UAC and nothing running
    in the background, such as recommended by nVidia. Still nothing works. I have the Sims 3, Call of Duty 4,
    Call of duty: World at War, Halo 2 for Vista and HAWX installed. The only one
    game I havn't had the error is H.A.W.X
    I am running Windows Vista Home Premium authentic with all latest updates from Windows Update.
    Any ideas? This leads me through the wall...

    Hello PaulFordge,

    Hello go to the temperature settings in the nivida, here's an image Control Panel.,.

    What is your idle temp? If you can load a game in windowed mode and have the temperature to be measured to see if the window is active, what is the temperature under load?

    Thank you

    jlluitj
    Josh Luitjens - self-taught computer tech.

  • Display driver igfx stopped responding and has successfully recovered.

    OK I play world of warcraft (obviously?) and every time I log in it does not show were I'm in the game the screen goes black and then my screen says 'no signal' if I don't hit the windows key or alt tab it will freeze, then it will goto this blue screen where it says "windows has encountered an error of display and restarts." There is much more on the blue screen, but I don't get enough time to read it because the computer stops... to be honost its rly... me off and I would rly appreciate any help to solve this annoying problem ty!

    If a this manufacturers site graphics card driver, for example Nvidia / Ati etc. If on board from the motherboard manufacturers site

    IGFX tells me that it is an Intel hraphic chip:

    http://Downloadcenter.Intel.com/default.aspx

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • 09.0 "NVIDIA Windows Kernel Mode Driver display driver, Version 209.01 unresponsive and has successfully recovered".

    "NVIDIA Windows Kernel Mode Driver display driver, Version 260.99 stopped responding and has successfully recovered." My screen, hang up, then flashes, then turns off, then comes back on, the same month so much MORE Simple ERROR CODE? How do I stop this? With a SIMPLE ANSWER! (BUY A MAC)

    "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

    Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

    As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
    If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

    If playing with video driver versions did not help, make sure that the box is not overheated.
    Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
    Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

    If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

    I download cpu - z and gpu - z (both free) and keep an eye on the video time

  • Qosmio X 500 and question NVIDIA Windows Kernel Mode Driver.

    Hello

    For some time my X 500 will 'freeze' then gives me a black screen before returning to "normal" with an error display window in the taskbar. The read error ".

    "* Display driver stopped responding and has recovered."
    "+ Display driver NVIDIA Windows Kernel Mode Driver, Version 259.12 stopped responding and has successfully recovered.

    Have run a diagnostic on the laptop and tried the NVIDIA drivers updated etc, but it continues to happen.

    Any ideas on the causes AND more to the point HOW to solve this problem?

    I post a screenshot of the error message but cannot find how this is done - if it is allowed?

    See you soon

    Frank

    Hello

    I guess that this is caused by the graphics chip, it is possible that caused graphics card driver problems related to bad entries in the registry or in the worst case the graphics chip could badly run.

    Also found this thread where the user that edbelgium seems solved problems with graph on X 500.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64607

  • Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

    Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

    Hiya,

    I have recently installed Windows 8 Pro, installed all of my usual applications etc..
    The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
    "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
    Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
    I can't find a way to properly uninstall the graphics driver.

    At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

    Hi guys,.
    Looks like this isn't just me.
    Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
    Information system;
    Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
    CPU: AMD FX-8150 eight physical cores
    GPU: ASUS NVIDIA GeForce GTX 560 TI
    Main hard drive: OCZ Vertex 3 120 GB
    It may be useful
    Edit: Still not falling down, 11/02/12, 4 days

    New edition;

    If you still receive the error message, try the following steps;
    Has. try to perform a clean installation of the driver.
    Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
         

    You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
    B. close all other programs
    It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
    You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
    More information can be found below
  • Display driver stopped responding and has recovered the display driver NVIDIA Windows Kernel Mode Driver

    Hey guys I have a problem that is really starting to stop a little worth. I recently bought this desktop computer and I had problems with the GPU drivers when I play some games. In the middle of my game, I am reduced to a minimum and maximized every 15 seconds and have the error "display driver stopped responding and recovered, NVIDIA Windows Kernel Mode Driver display driver." I tried SEVERAL solutions from different threads, and I still have this problem.

    Things I've tried:
    -Added a TdrDelay (8) in my regedit
    -Defining my CPU PhysX on my GPU instead of automatic selection
    -Install an older driver over the last.
    Specifications of the PC:
    -8 GB DDR2 RAM
    -Nvidia GeForce 9800 GT Galaxy
    -Power 500w S
    -Card mother ASUSTeK Computer Inc. M3N-HT DELUXE
    -Microsoft Windows 7 Ultimate 64-bit free multiprocessor-7601 Service Pack 1
    -AMD Athlon (TM) 64 X 2 Dual Core Processor 6000 +.

    Hi Vexin,

    Try the following steps to solve the problem.

    Step 1:

    I suggest you uninstall the device of the graphics card from the Device Manager.

    To open the device in Windows 7 Manager - check this link.

    Once uninstall you the graphics drivers in the Device Manager restart the computer.

    Step 2:

    Visit the manufacturer's website and download the latest drivers for the graphics card.

    Link to the manufacturer's Web site.

    http://www.GeForce.com/drivers

    I hope that helps!

  • driver NVIDIA windows kernel mode 285.62 unresponsive

    Momentarily, screen off, then recovers. Message "Display driver driver NVIDIA Windows Kernel Mode Version 285.62 unresponsive & has successfully recovered".

    Windows 7 Edition Home Premium.

    Any suggestions?

    This is a problem experienced by many users and (surprise) No (proven to work for all or most users) solution/fix. A solution/fix may work for a person facing this problem; but maybe not for the other person.

    This issue is encountered by other people with the same version of the driver and is being discussed on the forums from Nvidia since December 2011. You can try many possible solutions mentioned.

Maybe you are looking for

  • Qosmio X 870-white spots on screen

    My Qosmio X 870 is 8 months old and have noticed white spots in the middle of the screen (more about half higher and mainly in the Center and go to the right of the screen). They are pretending be worse. When I go to a dark wallpaper that they stand

  • I just reinstalled my computer about two weeks

    Okay I've reinstalled my computer about two weeks and I I'm a player, I can't play the games I used to play before I reinstalled it and I actually reinstalled to remove a whole bunch of garbage and I hope that it would help me to play with less offse

  • Firewall Windows Vista never displays notifications when a program is blocked

    Firewall Windows won't display notifications when a program is blocked, even though I have this option turned on. I was never notified of the any of these events by the firewall, although there are many entries in the security event logs. Does anyone

  • Upgrade to win 10

    0xC1900101 - 0 x 30018 Installation failed at the FIRST START-UP with an error during the operation of SYSPREP. No idea how to solve this problem? Thank you!

  • VPN NAT problem

    I was informed by an outside vendor they need me to install a VPN site-to site on our ASA 5510/8, 4. I have configured the VPN IPsec site to site, but they have a weird requirement. For some reason, they want me NAT the server in question for 172.19.