Display front panel in secondary vi clones

Hi guys,.

I'm trying to start several clones of a vi reentrant and view the front of each clone in a secondary.

I'im using 'open' with options x 80 vi reference function (call and forget) and x 40 (simultaneous call) to open the reference to my "AC asynchronous." vi:

and then I start the vi with asynchronous call function:

I do this twice. I have then two references to clones of the vi that I fed to the insert method two sub-panels vi:

I don't know the screw are running because they meet my orders and the façade is correctly inserted in the sub-panels but not update!

Is it possible to use the sub-panels with vi clones?

Thank you for your help,

Peper

Try to remove x 40 option:

It lets you VI duplicate without opening separate references for each instance.

Check AsynchronousCallAndCollectUsingOption0x40.vi using examples. They open a single reference, but duplicate VI 10 times that run in parallel.

If you open the reference, you manually create separate clone which is independent of the other clones.

Tags: NI Software

Similar Questions

  • Any LabVIEW 2009 Front Panel Gage displayed as circle deg continues 360?

    Any LabVIEW 2009 Front Panel Gage displayed as circle deg continues 360? I want to display a position of motor on the Panel before LabVIEW as a circle of 360 degrees. Is there a way to make the pledge appears as a circle of deg continues 360?

    dbaechtel wrote:

    Gauges and dials, buttons, none of them seem to be designed for continuous operation of 360 degrees. Of course I can set the scale of 0 to 360, but I can't get rid of the gap between 0 and 360.

    How to set up a pledge to show a continuous 360 degrees without a gap between 0 and 360?

    To change the gap, take the line high marker and move it to the desired location (in another origin, enter the low marker).

    Also, don't forget to wrap the raw in 0.360 rank if it falls outside. Here's a quick example (LabVIEW 8.0).

  • Front panel display

    Sony DAV-DX250 front panel display will display interval short white aster. Click on the display board lens returns to the digital display for another short interval. Dad unit not overheated and has not been abandoned.

    Suggestions?

    Hello Truman,

    Try to reset the DVD Home Theater system and see if it helps.
    In order to reset,
    Unplug the power cord of unity HTS of the socket for a minute.
    Plug it directly to a power outlet and switch on the device.

    If the front panel display does not always illuminate upwards, perform a cold reset, which returns the system parameters, such as the speaker settings and preset stations, factory settings.
    To reset the cold,
    Press the POWER button on the front panel of the unit to turn it on.
    After this, press the button STOP, EJECT and POWER on the system at the same time.
    If the front panel displays works, then, "COLD RESET" will appear on it.

    If the problem is still not resolved, it may be necessary to return the unit for service. Use the following link for a repair facility for your HTS

    https://eService.Sony.com/

    If my post answered your question, please mark it as an "accepted Solution".
    Thank you for your message.

  • display the error when editing on front panel

    Hello

     

    When I add another tab (notching amplifier) in the front panel, the program displays connection error. What should I do to get rid of these errors? I am attaching the file along the slot vi.

    Kind regards.

    This happens because the data type of the tab control changes (you add another page). A tab control is essentially an enum and enum values are part of the data type. A reference to the tab control control is to be packaged and passed in several subVIs. Cluster of frontage on these subVIs control has the element 'Hand Control' value "Include the Data Type". Thus, what they expect to see (for example, a tab with 3 pages) is not what they get. That is why the thread cut. You must either:

    • Uncheck "Include the Type of data" for the item "control of the hand. I don't know what other impact this will have, as I look at all the code.
    • Update all the controls on the front panel with a new reference to the command.

    Aside: who wrote this program needs a lesson on the typedefs.

  • Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel?

    Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel? Examples or suggestions would be greatly appreciated.

    Thank you

    Tunis

    Thank you Adam, it's originally in a while loop, I placed it in a loop for example, wired County in the for loop and presto, this son of a digital indicator. It works very well. Thanks for the help folks.

  • The time on front panel display

    Problem solved.

    Apologies to remove the original message. He initial post was something like this:

    --------------

    I twice parallel loops running - 1 who acquires the data every 30 seconds and the other just infintely loop to show the time on the front panel. But for some reason, timed loop data acquisition has been working well and do not release control to the other timed loop - for this reason present on the front was not getting updates.

    --------------

    After various discussions, I found what was my mistake:

    There are dependencies between the 2 rings - and no doubt because of the time was not getting updated.

    Solution:

    http://forums.NI.com/NI/board/message?board.ID=170&message.ID=75933&query.ID=60956#M75933

    Instead of using 2 timed loop, I used a timed loop to purchase and a while loop as explained in the thread above to display the time on the front panel.

    I hope this helps.

    Thank you.

  • display of a front panel without labview

    I have a cRIO-9073 that I use to control an oven. Everything works on my development machine, but when I open a browser on the computer that will be used in the oven, I can't front panel appears. All I get is the border and title blocks. The guy here who also LV said he used the performance Viewer? I can't find anything like that. What Miss me? I have attached the screen shot of what I speak.

    Thank you

    Seth

    The computer in the oven must LabVIEW or LabVIEW Run time engine. There was not a "Viewer" for many years.

    The image looks that you have either the Web server is running, or if this is the case, ActiveX was blocked.

    Take a look at aid to the publication on the web, or watch here

  • HP EliteDesk 800 G2 Small Form: The front panel audio connector - this only made type to use for headphones and microphone

    Hello

    I am trying to determine what type of audio 3.5 mm plug to put into the connector on the front panel for the use of a headset to make video communications.

    could be - sleeve, ring and end cap (mono audio and microphone)

    or

    could be - sleeve, ring, ring and tip (stereo sound and microphone)

    Having read through the manuals and nothing is said on the type to use.

    Hello world

    Just plugged the connector 4 poles on my headset combination for my mobile phone (cellular) and the box of pop - up asked me to select headset or microphone - no selection for both.

    Looks like the right sleeve is for headphones only, and the left one is for headphones or micro - selectable by the user and not the two on a single sheet.

    Everything explained by the practice - but not the paperwork in the manuals.

    #5 for microphone or headset - menu popup is displayed after you insert a 3.5 mm plug to select that one but not both at the same time.  (So I can't use my headset to phone)

    Thank you

    Son

  • Satellite A200-1N1: "Satellite" LED on the front panel does not light up

    Hi people!

    I noticed that my LED with the word "Satellite" on the front panel lights.

    You have all the hypotheses on the causes?

    Hi Maresha,

    The front 'logo' LED is enabled or disabled using a BIOS "Display front Logo" option that can be set on IT or OFF you need. Access your BIOS settings (F2 at startup) and check that this setting is set to 'ON '.

    Kind regards

  • Front panel locked, but not due to the structure of the event

    Hi it LV community.

    I did a staemachine program that executes an oscilloscope (screenshot of a provided below... the State of the problem). I ran my program yesterday and it worked very well. Then, like a model, a dialog box opens and I just clicked on it in a hurry. now my front hangs as soon as I move the above-mentioned State "the Oscilloscope settings.

    As indicated, I have go a repeat loop that collects successive impulses of my oscilloscope and displays on the front panel (it works fine). In parallel, I have a structure of the event that makes the tail for the real-time feedback of changes to parameters that I placed on the façade (exodus of state change).

    Here's the problem: as soon as I State 'Oscilloscope Settings' using a Boolean button on the front panel for get me there, the front hangs... No event triggered by this point, and even if it did, I already deselected the "Lock panel until the end of the matter for this event" checkbox in the case where the structure menu.

    So WHY is my front lock now? Thoughts anyone?

    Read the detailed help for event structures.

    He urged that a single event structure serve in a VI. There are moments where more can be used effectively, but caution and a thorough understanding of the structure are needed.

    The problem is that you have several structures of the event in the various cases of the state machine and they are set to respond to the same events.

    When the button Set Oscilloscope, the structures of the event in the purchase Menu and home screen States receive the event. The two lock the screen, but only one of these cases may work. It can transfer control to the State of the Oscilloscope settings, but the other event responding to this same event structure maintains the locked Panel.

    The solution is not not to release any of the event. The default value is usually the best setting. The best solution is to spend on an architecture of producer/consumer (events). Who uses two parallel loops. The producer has the one and the only structure of the event and passes orders to consumer loop through a queue.

    Probalby want as the mechanical action on the buttons to lock when you press. Put kiosks inside the respective case of event changed value and local variables becomes unnecessary.

    Lynn

  • How to make non-visible control on the Front Panel appear at Design time?

    I have a few controls on the front whose visibility is changed (on or off) at run time. The problem is that if I stop the Run time, the visibility of the control remains in the running in design mode state. So I am not able to see or find the control to make changes in design mode.

    How can I make all the visible front-panel controls, or find and make it visible to a control on the front whose visibility has False?

    Thank you.

    It is documented in the help of LabVIEW.

    Hidden front panel display


    Perform the following steps to display a hidden front control or indicator. You can also hide the indicators and controls on the front panel.

    1. Find the terminal block schema for the object. "If you have multiple devices with the same type of data, right click on the terminals and select visible elements" Label in the context menu. Find the object with the label that corresponds to the object hidden façade.

    2. Right-click in the Terminal, and then select Show Control context menu if the object is a control or indicator to show if the object is an indicator.

    You can also use the Visible property to display the controls and indicators by program.

    You can also view all hidden front panel controls and indicators.

    Path: Fundamentals-> build the façade-> how-to--> configure the objects-> display on front panel of the façade hidden object.

  • How to view the PSA screenshot on front panel

    Anyone know how to view the screenshot of the specturm Analyzer the PSA series on the façade. I can put the JPEG file in the C drive, but I can not display on the front panel. Please see my labview code.

    Thank you, very good information

  • Update of Acquisition of tension over on front panel

    I have this simple motor driver program that communicates with a stepper motor controller. I now have to combine this vi with person who acquires a finite number of data points of tension. I found an example of tension over who works with my daq (usb-6009). I was thinking about another stacked in a loop sequence for works to save the voltages, motor training, save several tensions, etc. a desired amount of time.

    I wish I could see the tension on the front panel, because I'm their record. Is there a simple way to do this when requiring a finite number of tensions? I use finish because I need only say 10 seconds of data in each engine position and fixing the number of samples whose rate is a simple way to adjust the ignition.

    The examples I've seen update tension using a while loop. If I do this then the while loop keeps going until the user stops it.

    Thank you very much. 2 vi, I work with is attached.

    BTW, I'm a graduate of mechanical engineering student.

    Hello

    See this link on the waveform data type.

    http://digital.NI.com/public.nsf/allkb/B965F316364DE17B862572DF00363B10

    Writing custom file Express VI will be likely to work as a note for a long time the sample and, therefore, the loop rate is not too high.  It's because the writing on a file of measures, although practical, contains a bit of overhead.  If you want to display multiple channels, you can merge the signals and display them on a single diagram, or use several.  It will be you.

    The best indicator to use will depend on what data you want to display.  The waveform table is going to be the most complete, but as you have found the samples back in the form of an array of double type, you can indicators table, or remove points on the table and use digital indicators as well.

  • How can I insert a jpeg image in the front panel

    Hello

    I'm new to labview and have written a vi using a data logger NI USB-6008 reading from a sensor that performs a calculation and then displays a value. I am trying to put the logo of our company on the front screen when running, but can't work out how to do it. The logo is a jpeg file.

    I use the trial version 2010.

    Thank you

    Andy

    Hello

    Drag / move your jpeg file from windows Explorer to the front panel of your VI should work.

    Hope this helps

  • Creating custom shaped front panel

    I want to create a popup in personalized form (other than the rectangular shape). For this I created a green façade (0x00FF00) background color, placed the shape I want as a background image. Now the unnecessary part is in green. I then used a function of windows (USER32. DLL: SetLayeredWindowAttributs) to the green of the transparent color. It works for me, but the question here is that it takes time to become transparent. For a fraction of a second, the green color is visible to the user. Is there another way to be a part of the transparent window?

    You will probably need to get it to keep the front screw closed/hidden until after he made the call to USER32.dll (and make that one of the first calls you make). It is probably your façade opening when the VI of loading display Input Panel began execution - or you might not be calling it right at the beginning of your VI so there is some delay.

    Oh - affecting the hidden Panel should work - there is a difference between closed (no front panel) and hidden (open, but not visible) - properties that can be performed on narrow front panels work usually on hidden. If this still does not work - you could try to move the position of the window off the screen (p. ex.-5000,-5000), show it, apply the property and then bring it back.

Maybe you are looking for