Display Internet

Similar Questions

• Display Internet explorer opening is small.

  When I open internet explorer the size of the window is the right size, but the displayed information are small. If I go to the page, then expand it show that it is 100% display. I like the display to 150%. Is it there to save the setting of 150% and it shows all the time then this size. It becomes very annoying, changing the display of the page whenever I change web pages or reopen Internet explorer.

  Greetings,

  In your status bar, click the down arrow next to your zoom setting > all at the bottom of the window > click Custom > change the parameter default to 150%, or when you choose

  Who should do it for you, close and reopen IE.

  HTH

  > WT

• Computer displays Internet Explore cannot display this Web page?

  Computer shows the IE cannot display the page load?  I tried to go to google chrome and an error 310 (too mauger) redirects) help!

  This problem only recently begun? You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of internet connection problems reported for most, if not all, entry.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• Display Internet Explorer SPRY Menu problem

  Some can you please please please help me

  My spry menu displays correctly in Safari on mac, but goes crazy in Internet explorer on a PC

  The links is...

  www.andybarrington.com./Ice/index.html

  Im going crazy trying to figure out and nowhere

  IM using dreamweaver cs4 to create this site on imac 10.6

  All the best

  Andy Barrington

  Andy_Baz wrote:

  http://www.andybarrington.com/ice/index.html

  Downloaded for you now

  Some how to reproduce the page, you lost some vital components

  (1) the link to the 'SpryMenuBar.js' file in the SpryAssets folder. Which can be inserted just before the link to the css (see below)

  
  

  (2) the code below which can be inserted at the foot of the page just before the closing tag

• Windows 7 network system tray icon displays "Internet access" when there is none

  I recently had this episodic and deeply frustrating problem with a laptop. Sometimes the internet works, other times not, even if Windows reports that it has access to the internet.   I was wondering if there could be a firewall issue, tried to remove and reinstall the driver of NIC in addition to other things but the problem kept reappearing.  I just managed to find the answer so I hope this will be useful for someone else who feels the same.

  The problem is caused by the Apple Hello service installed by Adobe Creative Suite CS3. It's pretty old now, but I installed it recently because I needed to use one of the applications.    The Bonjour service adds the default gateway 0.0.0.0 and therefore stops the internet access.

  The problem and the solution is given here:
  http://helpx.Adobe.com/Creative-Suite/KB/Bonjour-Windows-CS3-CS4.html

  This site is also very useful:
  http://www.petenetlive.com/kb/article/0000332.htm

  The only thing I would add is to run the CLI window with administrative rights so that the commands to run (type "cmd" in the start menu > search and then right-click on cmd.exe to run with admin rights).

  HTH

  Andrew

  Hello

  Thanks for sharing the information.

  I don't know that this information would help the other users of the Forum community Microsoft.

• Why all my programs files displays Internet Explorer icon

  1st, sorry for the bad English.  When I open my computer, all the files of programs shows IE icon. When I click to open the file, for example, I open Google Chrome, it opens than IE. Any programs like Photoshop, KMPlayer, Desktop, etc. and downloads of files. But others like mp3, photos and videos is normal. But when I open the guest account, all things he is normal. Somebody help me before I throw my computer to the wall. : D

  Look into this,

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

• I can not find the internet Explorer on my computer.

  I can not find the internet Explorer on my computer. To use it I have to go to corel draw, then the help and it will open to explorer 8. If I try to fown it loads, it won't let me. I got a virus and it is gone, but I can't use yet internet explore the right way.

  Hi Janie,

  The executable file for IE is called iexplore.exe.  You can click Start and then type iexplore in the search field.

  Microsoft has a tool to resolve this that should return the IE icon on the desktop - http://support.microsoft.com/kb/945402. Under the fix for me article, there is a button, you must click called Microsoft Fix it.  Click run in the file download dialog box. Follow the steps in the Wizard icon on the desktop to display Internet Explorer to create an Internet Explorer desktop icon.

  Answer him back if you try this method and let us know if it is your problem.  It is a relatively new tool and it would be nice to receive feedback on how it works.  There are several other applets fix it available for further questions.  More information can be found here: http://support.microsoft.com/fixit#tab0.

  Barbara

• Laptop connected to 2 ISP networks (Ethernet + wireless) - Wireless Connection shows a "yellow Triangle" - no Internet access

  I am facing a network unusual problem with the following network configuration

  1. laptop connected to isps1 via Ethernet - 192.168.0.x (serves as router NAT and DHCP)
  2. same laptop connected to ISP2 network Wi - Fi - 10.1.1.x (router does NAT and DHCP)
  3 WiFi connection shows a "yellow Triangle" - no Internet access

  Note:

  1. neither the connections require Sign-In to access the Internet
  2 Ethernet is defined on top to control configuration\reseau and Internet\Network Connections\Advanced Settings\Adapters and links
  3 operating system: Windows 7 64-bit SP1
  4. the Wi - Fi network has access to the Internet as other wireless clients can connect to the Internet using the same.
  5. here is the weird part - if I disable the Ethernet adapter on this laptop, the "yellow Triangle" - no Internet access on the wireless connection disappears and he now reports "Internet access".

  6. If I now activate the Ethernet back, connection Wi - Fi card always displays "Internet access"
  7. If I reboot, the problem returns - new shows a "yellow Triangle" wireless connection - no Internet access

  6. the question is not specific to this machine that the same issue is reproducible on another computer with 64-bit Windows 8 installed.

  This is expected behavior that has an explanation?
  I can provide more information if necessary.

  Your comments and suggestions are welcome.

  Hello Mohit,

  In this case, you may need to update your network card. Please visit the website of the manufacturer of your system and get the updated driver.

  Let us know if you need additional assistance.

• Opening of the internet in Wi Fi system eventhough WiFi Net work was count in the TV screen

  Dear Sir

  I bought a week before the BDV 3100 Home Theater system and my house located at Thane, Maharashtra, 400604 India.Demo this system is on the way. I find for operating a Wi - Fi connection to open in TV thro this need for home theater WPA Key.As by MTNL Broadband, I operate my laptop wireless in my house with the WPA key word. When the TV is connected thro Sony BDV 3100 homesystem, on the screen, we are able to see WiFi available in the area and when I use the same WPA key used for internet wifi connection, the screen displays Internet cannot be opened to check the router of my wide connection Strip House. I would like to know how to open internet in home TV thro theater system

  Concerning

  J.SADASIVAM

  A 602 ASPEN, RAHEJA GARDEN

  LBS MARG

  THANE WEST

  400604 INDIA

  This community is for products sold in the United States and the Canada. We recommend that you contact Sony India here for best support.

  If my post answered your question, please click "Accept as a Solution."

• IGoogle is my default home page and closed, that Firefox has a substitute?

  Windows 7 is the operating system

  NOTE: Firefox is in no way related to the iGoogle homepage.

  I did some research and found that Mozilla has created no alternative to iGoogle.

  Here are a few websites which is similar to iGoogle:

  • igHome
  • Netvibes

  WARNING: Always be careful when to display internet content. I will take no responsibility for any damage caused by a Web site. Visit at your own risk!

• Reference Dell OMSA - does not work after the installation of KB3161608

  I recently installed the last batch (June 2016) the MS updates on our servers.  It went well with the exception of two servers, both running Server 2008R2 and a PE2970, a PE2950.  These are our only two servers running server 2008R2.  On both machines, after installing all the updates, I was unable to open OMSA.  The browser will display "Internet Explorer cannot display the webpage".  OMSA continued to work properly on the rest of our servers, which are almost server 2008.

  I tried another browser, but that has not worked.  OMSA reached 7.3, so I downloaded and installed 7.4.0 and the 7.4.0.2 updated.  I found references to similar online, and some of the install OMSA fixes problems using the prompt, or "runas admin".  I installed them all over the place, but no matter how I installed it, I got the same result!

  I've not found errors in the event logs of the server.

  So I started uninstalling updates until I found the one who broke it, and it was KB3161608.  Uninstall this update fixed OMSA on both servers.

  This updates is listed as optional, so I'm not sweating it for now.  I believe that this is a certificate problem and could be fixed by creating a new self-signed server certificate, but this isn't really my area of expertise.  But I wanted to put this out there in case it might help someone else.

  In my tests, you should communicate the updates installed then OMSA will not work.

  KO 3161608

  KO 3172605

  KO 3172614

• Networking freezes completely, only restart allows

  before I changed the power supply and now after that I sometimes find my network frozen (after I have unlock my computer and sign in again - maybe it is related to saving energy?) and frozen to - I mean completely unreversable frozen - network adapters are displayed (internet) to work but nothing connects and says my VPN "could not resolve host name to connect to. , I can turn my network cards but when I try to reactivate them (connect) - window "connection" just stay permanently be visible and nothing happenes (and it cannot be closed) and if I try to reboot\shutdown - I get BSOD DRIVER_POWER_STATE_FAILURE tcpip.sys + 156 B 5, I have two NICs - a built-in and one pci-e (tried to delete one - did not help) tried to open the Device Manager and refresh the - freezes up, tried to stop the service in services.msc netowrking - stop freezes and never ends (tried a few other - stopped very well services)

  latest drivers for network cards, install all windows updates. I have a desktop PC under 24\7, locking (win + L) for the night.

  also describes my problem here and transferred two kernerl minidumps - http://windowsforum.com/threads/networking-freezes-and-only-restart-helps-which-gives-bsod-driver_power_state_failure-tcpip-sys.190961/

  * added: just happened while I was watching a movie with no locked office (win + l).

  and if I turn off and turn back on the other network adapter, but when I turned off my frozen and I tried it on again - it was no longer possible for two adapters put-everything froze.

  restarted, - the problem happened again in 40 minutes--did not turn off\on nothing, just restarted - netowork adapter disappeared completely from the Manager of peripherals and netoworks, refreshes did not help, only BIOS reset (battery take back out\put in) enabled, after booting in hitted refresh Device Manager and the device appeared.

  Win 7 pro, latest drivers atheros, asus5k se - AMIBIOS 604 (afraid to turn the motherboard in a rock by updating)

  is this simular situation: http://social.technet.microsoft.com/Forums/ru-RU/5b4c9cb8-95d2-40c2-b530-231261f3e941/-?forum=ws2008r2ru

  Hello zale.

  According to your description, you work on the VPN. So I recommend you announced your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• Some Web sites do not work properly

  Original title:

  Glitch or?

  When I open certain web pages or sites, some parts of the screen begin to Flash and sometimes it gets really bad and I see even more page. I don't know what it is, but it appears randomly.

  Hi Sarah,.

  It could be a problem with the compatibility of the Web site or the video card drivers are outdated.

  What browser do you use?

  If you are having problems with Internet Explorer then you can see the steps below:

  Sometimes a Web site you visit doesn't look like you expect it. Images may not appear, menus may be out of place, and text boxes may be blurred together. This can be caused by a compatibility problem between Internet Explorer and the site that you are. When a site is not compatible with Internet Explorer, you'll see the compatibility view button in the address bar. You can activate only display Internet Explorer compatibility for the office.

  Reference:

  http://Windows.Microsoft.com/en-us/Internet-Explorer/use-compatibility-view#IE=IE-10

  You can also have a look at the following link:

  "Internet Explorer cannot display the webpage" error

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 3 of the article mentioned above.

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Please post with the State of the question.

• When listening to the music of Grooveshark, the sound turns off after a minute.

  When listening to the music of Grooveshark, the sound turns off after a minute.  Must press the key or the mouse to re-activate.  I turned off the screen saver.  Cut off.  Grooveshark said that they have no control over that, but the operating system.  Can someone help me with this?

  Hello

  Try the following steps.

  Method 1:

  Sometimes a Web site you visit doesn't look like you expect it. Images may not appear, menus may be out of place, and text boxes may be blurred together. This can be caused by a compatibility problem between Internet Explorer and the site that you are. When a site is not compatible with Internet Explorer, you'll see the compatibility view button in the address bar. You can activate only display Internet Explorer compatibility for the office.

  Use compatibility mode in Internet Explorer:

  http://Windows.Microsoft.com/en-in/Internet-Explorer/use-compatibility-view#IE=IE-10

  Method 2:

  I would say to change the mode of Internet Explorer 9 browser.

  Steps to follow:

  a. open Internet Explorer, press the F12 function key.

  (b) in the part of developers, click browser mode and click on Internet Explorer 9.

  If the Web site uses flash player, try to uninstall and reinstall and check if it helps.

  It will be useful.

• Post cloning question: https does not

  Hi all

  I got (I hope) clone of the db layer and the layer of apps using clone fast.

  It's system rac db level at 2 knots, and so the application layer is a 2 nodes.

  When trying to load the https url, it does not load and displays "Internet Explorer cannot display the webpage"

  versions:

  EBS: 12.1.3 and db 11.2.0.2.

  Under files, settings:

  s_webentryprotocol is https

  s_login_page = https://ebsuat.domanin/OA_HTML/Appslogin

  s_enablesslterminator = no entrance!

  and s_active_webport = 443

  I believe that requires the above is all that's fixed at... What am I doing wrong here?

  Please see the following documents.

  The use of Oracle 11 g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [823587.1 ID]

  Cloning of Oracle E-Business Suite Release 12 RAC systems compatible with the Rapid Clone [ID 559518.1]

  An "Internet Explorer cannot display the webpage" error, please check that apache save files as well as the details in the application.log file.

  Please also confirm that AutoConfig completed successfully on all nodes of the layer.

  Thank you

  Hussein