Have just updated to lollipop and everything looks good in the world

except when I SLEEP the phone, if I hit the left upper corner of the screen as the phone wakes up

Gets a bit annoying because when I hold my phone it keeps on

you want to disable - any ideas anyone?

Thanks in advance


Thank you

just thought that out - 3rd-party app causing

Tags: Sony Phones

Similar Questions

  • My cursor takes the form is no longer the hand icon to slide the screen down to close.

    Is no longer my cursor becomes a hand icon to drag the screen and I am unable to do it now.  Activate master to delete to close the active screen. In addition, there is no way to access the menu on the right to search, close, etc.. A way to solve this problem?

    Hello Mikal,

    I understand the inconvenience caused to you. I will try to help you in the matter of fixing.

    In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

    1. Did you do any hardware and software changes to the system?

    2. Since how long you are having this problem?

    3. Do you receive an error message? If Yes, what is the exact error message?

    It is possible that this problem would have occurred due to corruption in the mouse settings in the system.

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Run the built-in convenience store equipment and devices and check if it works. Follow the steps below.

    Note: If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    1. Press Windows key + R, type Panel.

    2. Type of Troubleshooting in the search bar, click Troubleshooting.

    3. Click hardware and sound, click on material and devices.

    4. Follow the steps in the wizard to run the troubleshooter.

    If the problem persists, please follow method 2.

    Method 2:

    Please follow the steps below and check if it helps.

    1. Open the "Start" menu by clicking on the Windows logo in the corner of your screen. Click on "Control Panel."

    2. Click the box in the corner of the window titled "Search Control Panel" and then type "mouse". The window will automatically display search results.

    3. Click on the word "Mouse" in green text to open the "Mouse properties" window

    4. Click on the tab "pointers". Under 'Customize', the window shows your current mouse icons.

    5. Click on 'Select Normal' to highlight and press the button "Browse".

    6. Scroll the list of available cursors and find the files named 'aero_link,' 'aero_link_l' and 'aero_link_xl '. These files contain icons of the hand in three sizes, from the smallest to the largest.

    7. Click on the file of the icon of the desired size. Press the button 'open '. Repeat this process if you want to change all other cursors. For your pointer still resemble a hand, do it for each other cursor on the list 'customize '.

    8. Press the 'Ok' button when you are finished editing all the sliders. The system will immediately change the appearance of the pointer of your.

    For reference:

    Please refer to the procedure described in the article below and check if it helps.

    Search, touch, & mouse


    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

    Thank you.

  • In Windows Media Player, my light "Start burn" would not light after dragging the songs on my playlist

    In Windows Media Player, my light "Start burn" would not light after dragging the songs on my playlist, he said only "Connect burner and restart". I have already burned a music CD "RW", why he said burner "connect"? The burner is already installed? I tried the "Device Manager" thing wasn't working, thank you for your help. "


    1. have you installed any third-party DVD burning software on the computer?
    2. could you give us the exact error message?

    Method 1.
    If you have installed a third-party software CD burning remove it and then try to burn the disc and check. Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Method 2.
    a. Click Start and type cmd into the search bar and press ENTER.
    b. in the type guest following command press ENTER.
       WMP.dll regsvr32.exe.
    c. close the command prompt and start Windows Media Player and check.

    Method 3.

    You can re-create the database of Windows Media Player and see if that fixes the problem.

    Stage i: To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

    a. exit Windows Media Player.
    b. Click Start, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
    c. Select all files in the folder and then click on Delete on the file menu.
    Note: You don't have to remove the folders that are in this folder.
    d. restart Windows Media Player.
    Note Windows Media Player automatically rebuilds the database.

    Stage II: If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

    a. exit Windows Media Player.
    b. Click Start, type % LOCALAPPDATA%\Microsoft and then click OK.
    c. Select the Media Player folder, and then click on Delete on the file menu.
    d. restart Windows Media Player.
    Note Windows Media Player automatically rebuilds the database.

    I hope this helps.

  • the monitor can not display any image on the screen. CPU power button is lit orange instead of green.

    Original title: I have absolutely no idea of what is wrong with my Dell Dimension C521 Windows Vista (x 86)

    It is impossible to display an image on the screen. CPU power button is lit orange instead of green.

    See page 47 of the owner's manual


  • Problem of Timer and TimerTask for counter display all seconds on the screen.

    Dear friends,

    I have little problem in the use of the timer. I took the timer to display the counter on each period fix repeatedly. but I did not here. Please help me. The code is as shown below.

    import java.util.Timer.

    java.util.TimerTask to import;

    Import net.rim.device.api.ui.Field;

    Import net.rim.device.api.ui.UiApplication;

    Import net.rim.device.api.ui.component.RichTextField;

    Import net.rim.device.api.ui.container.MainScreen;

    SerializableAttribute public class TimerTest extends UiApplication



    public static int COUNT = 0;

    Public Shared Sub main (String [] args) {}

    TimerTest tt = new TimerTest();

    tt.enterEventDispatcher ();


    public TimerTest()


    a new screen

    pushScreen (new TimerMainScreen());


    SerializableAttribute public class TimerMainScreen extends screen




    Add (new RichTextField ("Count =" + Integer.toString (COUNT), Field.NON_FOCUSABLE));

    try {}

    Timer = new Timer();

    timer.scheduleAtFixedRate (new TimerMainEvent (), 200, 1000);


    catch (System.Exception e)


    do nothing



    private class TimerMainEvent extends TimerTask


    public void run()




    COUNT ++;

    If (COUNTY<>

    Add (new RichTextField ("Count =" + Integer.toString (COUNT), Field.NON_FOCUSABLE));

    on the other

    Timer.Cancel ();

    Timer.Cancel ();


    catch (System.Exception e)


    Do nothing






    Please let me know where I'm wrong, I want to display all seconds on the screen. If I set the interval 0 then it run TimerMainScreen first time but after all no update, I see on the screen.

    I thank in advance


    Use the following Code in your race.

     UiApplication.getUiApplication().invokeLater(new Runnable()
      public void run()
       add(new RichTextField("Count = " + Integer.toString(COUNT)   ,Field.NON_FOCUSABLE));
  • Light spot on the screen

    Hi all

    When I talk about things with a black background as the heart monitor, I notice there is an area of the screen that much lighter look...

    It looks like a stain on the screen, but then when looking carefully, you'll notice this isn't on the screen, but in the colors.

    Does anyone else have this problem?

    I have attached a picture of it - look at the number below and you will see that it resembles a task a bit more light... it's hard to take a picture of.

    Thanks for your help,


    Hi Tori

    It is an intentional visual effect that is designed to repeat the contents of the underlying screen.

    The effect appears every time that see you some screens that slide on top of the other, for example:

    -By the Notification Center sliding down when opening you view the screen of the watch face;

    -For the opening of eyes by dragging to the top when you view the screen of the watch face.

    If you want to disable this feature:

    -On your iPhone in the app shows, go to: Watch My > General > accessibility - turn on / enable the setting to reduce transparency.

  • Pavilion 10 x 2: indicator light hung on the screen, a limited control


    in the last days I have trouble with the laptop:

    In the upper left corner of the screen there is always an indicator the same as the brightness/volume indicator - always showing 100 regardless of the actual values of brightness/volume. I am not able to make the light disappear.

    At the same time slow down some operations (for example, I have problems writing an email - letters appear on the screen a few seconds (or tens of seconds) after pressing the keys.) The start (both on-screen) button and the button in the keyboard don't work, control touch doesnot work properly, the hotkeys (like alt - tab) does not...

    I though maybe some of the new updates that do not cooperate with the drivers - I tried to uninstall the updates recently, but without success.

    Can you please tell me where is the problem and how to fix it? Thank you.

    Thank you for your response.

    I found the cause of the problems. It's material - one of the external buttons was mechanically damaged and active all the time...

    I'm sorry to bother with a stupid question...

  • Organizer of items 11 display more correctly on the screen

    For some reason, organizing now opens misplaced on my monitor.  It is up too high, which means that I do not see the top bar which I normally take and drag to move a window.  I do not have access to the first two rows of thumbnails and when I select an image and open it, I don't see any of this because it is off the screen.

    I have attached a few screenshots.

    Screen Shot 2015-03-21 at 11.02.27 AM copy.pngScreen Shot 2015-03-21 at 11.06.26 AM copy.png!

    Someone knows how can I fix?

    I'm on Max OS X Yosemite.

    Are you sure you're in the right library? The library of the user is hidden in the latest versions of Mac OS X. To see it, click on the menu go to the Finder and hold down the Option key, then it appears in the small house for your user account.

  • Print gets scrambled to the top of the screen down, I look at a selected site?

    Print-screen gets progressively blurred for the top down when watching / reading text on a Web site. It is not related to the Web site as this happens on all websites. Seemed if shows up after the last update. Cure?

    Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.
  • The display is larger than the screen. Zoom-out a frew times it cut OK how should I make it smaller?

    Recently, the size of the screen has gotten bigger than the screen and I have to either drag left/right to read it or (better) use the zoom to reduce to fit. How I put it so that it always fits without my nothing? It used to be like that!

    It is possible that the screen is too wide or too high.

    • Use Restore or expand in the context menu of the taskbar icon to set the focus to the Firefox application if you do not see the window of Firefox.
    • Open the system menu of the window of Firefox via Alt + space and see if you can move and resize the window (use the arrows on the keyboard).

    If it works, then first close all other open windows of Firefox and then close Firefox via "file > exit/Quit" to save the setting.

    If the above didn't help then see:

  • HP Omni 10, it starts, but not able to drag the screen initial screen is locked

    With the power button, it starts after the screen sleep don't lock couldn't slide to get the password screen.

    Don't know if the touchscreen went.

    No keyboard... so not couldn't find another way to try.

    Hey @pkp0512,

    Welcome to the forums of HP.

    You made recent changes to your Tablet? Have you tried to install Windows 10 or run and updates of Windows at the time it started?

    You should be able to access the Recovery Manager by turning on the Tablet by pressing the Volume down and the Power button at the same time. If the touch screen does not work to select the Recovery Manager we can confirm it's a hardware problem. If he leaves you, then you are looking to a software problem in Windows that a restoration of the system (accessible in the Recovery Manager) should take you around when he was work and restoration.

    Thank you.

  • How can I return the virtual keyboard (now in the center of the screen) down?  I don't see what I'm typing so I hope it works.  Help, please

    After a recent update the keyboard appears in the center of the screen, rather than at the end. How can I return it down?

    Press and hold the keypad icon bit, then slide your finger up to 'Dock '.

  • How to display text programmatically in the drop-down list box?

    Is it possible to display text programmatically in a drop-down list box.  I would like to display the word "Select" in the drop-down list box each time my program starts.  As it is now, drop-down list displays the last channel that has been selected the last time that the program is running.

    Thanks in advance.

    In fact, after actually reading your post...

  • Player Windows Media displays is not on the screen

    My Windows Media Player is played, but it does not appear on the screen... it looks like its current running in the desktop background? Displays tasks on the bar but the screen? I can right click on the far right of my office and the WMP menu appears, but no picture will appear.

    Hi Rosieand7,

    It looks like the Windows media player is in Mini Player mode.

    Mini Player mode allows you to minimize the player to the Windows task bar, while having access to playback controls and the ability to view visualizations and information about the currently playing item.

    In the mini Player, click anywhere in the drive that is not used as a button or volume control. The Player returns to the way it was before.

    Switch between display modes in Windows Media Player


    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • P2412H - displayed briefly and then the screen turns white.


    I got a pair of monitors of P2412H little more 3 years, bought from a dealer - I don't have tags and monitors say manufactured in September 2011 (so I think that, apart from any warranty).

    This morning one of them has failed - it displays briefly, then the screen turns white.

    Manual test:

    1 unplugged every wire and power button which is held for 15 seconds.

    2 reconnect the power cord.

    -Switch will blue

    -L' initial Dell boot screen is displayed on the screen for less than a second.

    -L the screen turns white.

    -Stays blue power button

    3. press one of the control buttons

    -Nothing happens

    4. disconnect the monitor

    5. connect the monitor to on PC with Windows connected using DVI.

    6. connect the power cord

    -Switch will blue

    -L' initial Dell boot screen is displayed on the screen for less than a second.

    -L the screen turns white.

    -Stays blue power button

    I also tried to reset the monitor according to the instructions of the manual by pressing keys 1 and 4, but as the monitor does not appear, I couldn't see anything.

    The monitor did briefly revived properly after one of my attempts back manually, but the after turning on and the new to check if the problem itself had set the monitor returned to the not displaying no not again.

    Can anyone help or point me in the right direction on how to fix it?

    Thank you

    * UPDATE *.

    Disassembled the monitor I've used this as a guide to youtube to open the monitor the safely:

    cs_setInnerHtml ('video_aebd897a-01ed-42eb-a8c5-b3b6ecee6556', ");

    Inspect the circuits printed for all the obvious problems such as cracked soldering or fried capacitors.

    Could not see the obvious problems... you realign a couple of back vertical capacitors where some of them were in sharp corners appeared to be very close together as a result.

    Back together carefully.

    Backwards and now it works very well for 48 hours.

Maybe you are looking for

  • Mail-ad: dieser account already exist

    Moin! I had mein Freenet account in Apple Mail Debby, weil're auf POP adjusted war und ich auf IMAP winds wanted, wie auf meinen other Geräten auch. Seither ist are mir nicht mehr possible das Konto wieder zu create, weil schon too equal zu beginning

  • How can I move direct mail to the folder under?

    How can I send mail entering subfolder directly?

  • Windows fax and scan without adding contact

    I use Windows Fax and Scan to send a quick fax to someone.  In the dialog box "New Fax", you can enter a name of my address book Outlook or to a phone number.  I would like to enter a name and a number for someone who is not in the address book witho

  • Touchpad on my Dell studio 1735

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: I tried to install the latest version of the driver but no change. The tab settings of the mouse went to Dell Touchpad. Scrolling does no

  • Error "Windows explore has stopped working" when you open the file in my documents

    Original title: opening a file in the folder my documents Whenever I try to open a file in my documents folder, specifically a CV that I downloaded on a construction site. I get a message that windows Explorer has stopped working?