Display of stand-alone ActionScript 3.0 language reference works do not

Similar Questions

• Stand-alone LR V6 V6.1 Update (worked on a PC, not another)

  I own a couple of Fuji cameras with sensors of X-Trans and expect update 6.1 (with treatment improved X-Trans) forward. I have (standalone) LR6 installed on a pc Win8.1 (main), but also a laptop Win8.1. After several attempts to run the update on the desktop (sign-out of LR, CC and then insert it again), I am not able to update. Program tells me that there is no update.

  A "chat" with the support of Adobe has been a useless waste of time. After having gathered all of my information, the technology of 'support' has asked me to post my question here. (3/4 of an hour that I won't be back again once there).

  So today, I tried to run LR6 on my laptop. Of course, as soon as I started LR6, he advised me that there was an update and after clicking on the link, it downloaded and installed. So, my laptop has 6.1, but the office is stuck at 6. Configured for as far as I know that the two facilities are the same. Does this mean that Adobe are rolling updates gradually? Or am I missing something? Can I find the file this file update downloaded on my laptop and copy it on my desktop?

  I read a few reviews stating that as a stand-alone version, I had no right to the 6.1 update. However, I was able to download on a single unit. It really makes me wonder.

  Suggestions for the process to be able to update the 2nd computer would be appreciated.

  I guess you have disconnected (e) Creative Cloud and leave the CC desktop application.

  Adobe seems to have updated these links. Earlier, I used worked. You might give that a try as a last attempt. You will need to copy and paste the link windows Lightroom_6_LS11.exe and then use another server in the trial. Copy the whole link, including the number after the = symbol.

  See this thread:

  https://forums.Adobe.com/message/7569916

• 2602 AP in stand-alone - using the two bands

  We generally use the series 2602 AP in light mode, however I have a scenario where we will install one with the stand-alone software.  I understand that we will not be able to utilze certain features that you get with the WLC as RRM, unreliable detection and clean air.

  We want to utilze the 5 GHz and 2.4 GHZ bands.  To do this with the autonomous access point 2602, will we have to set up 2 separate SSID?  I really don't want to do this if I don't have to minimize confusion for customers. Thank you.

  This decision is based on the client machines.  The device will choose who it will associate with.  You could always tweaking the settings on the device wireless to a single band favorite on the other.  There isn't any setting on the AP have devices prefer one over the other.  I hope this helps.

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• Add license VCB to a stand alone ESX server

  Hi all. Please forgive my ignorance on the subject. We have 8 stand-alone ESX3.5 Foundation licenses, but VCB is not currently registered on the hosts. I try to use vRanger connection and VCB to backup my VM that are located on a NAS. In any case my colleague just got the phone with HP and they informed him that we cannot add VCB for stand alone ESX servers, because we do not have a license server. I don't understand what they are talking about and why we would not be able to add the VCB component on our servers. Unfortunately, I do not understand enough Japanese to enter into a debate with HP (Japan) on the subject. Is there a reason that I couldn't apply the licenses that we have on the servers? Could someone with more knowledge on this help please me out. If you need further information do not hesitate to ask.

  See you soon

  Kevin

  .. .well the link here shows he included:

  http://store.VMware.com/servlet/ControllerServlet?Action=displayPage&env=base&locale=en_US&siteid=VMware&ID=ProductDetailsPage&ProductID=83581600

• Book the question of transfer with the only difference being: point Info/display: any device OR any stand-alone devi

  I use ADE to transfer a PC (windows 7) in a corner. I had no problem until a recent book purchase. I can't transfer the book in the corner [title of the book CE_COPY_NOT_ALLOWED - without permission to copy the Book]. I did all the permission things that are always recommended [allow the PC, remove and allow the PC, remove records of Nook, reauthorize Nook, etc.] several times. The Nook fine copy all the old books. But this will not be [I even bought another to check and it is not]. I have 2 books (a copy and we won't) from the same Editor (I bought a few months ago and the other is a new). The only difference I see is that when you select the book, click right, look at the Info under viewing point there are 2 different things. For the book which will copy, an observation: on any device. [For the book that doesn't copy, an observation: on any stand-alone device]. There seems to be a change DRM. What can I do?

  Thanks-*-Roy

  I've not seen the ' display: on any stand-alone device "before.

  One thing to try is to evade the ADE and a copy to the .epub DRM from PC to Nook by using Windows Explorer or similar.

  The info book by ADE will tell you where the file is on the PC.

  Probably should go in the "Digital Editions" folder on the corner, but should be pretty easy to see where the .epub files go. (***)

  Copy almost certainly works independently of the ' watch one: on any stand-alone device ' detail.

  It may or may not be that the meal will be ready to show it once it's there.

  (*) p.s. just realized that you can find where the books are placed on the corner of info book by ADE as well.

  Just look at your Nook library in ADE and watch the news.

  At least, it will work for books in the corner; then say you the right directory.

• I run the stand-alone windows installer to thr and displays the error code 0 x 80240009

  When I ran the windows update stand-alone installation, it updated kb947821 hotfix, but after he would not install updates

  0 x 80240009

  WU_E_OPERATIONINPROGRESS

  Another operation in conflict was underway. Some operations such as the installation cannot be performed twice at the same time.

  Restart and try again.

• 3750 stand-alone switch battery change error message displays

  We have some 3750 autonomous through our network. IT restarts automatically. through the history of logging, it shows Stack_Link_Change message but this switch is autonomous.

  ---------------------------------------------------------------------------------------

  C3750-1 # sh version
  Cisco IOS software, software C3750 (C3750-IPBASE-M), Version 12.2 (35) SE5, RELEASE SOFTWARE (fc1)
  Copyright (c) 1986-2007 by Cisco Systems, Inc.
  Updated Friday 19 July 07 19:15 by nachen
  Image text-base: 0 x 00003000, database: 0 x 01080000

  ROM: Bootstrap program is C3750 boot loader
  BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M), Version 12.1 (19(r)) EA1b, VERSION of the SOFTWARE (fc2)

  The availability of C3750-1 is 3 hours, 11 minutes
  System to regain the power ROM
  System restarted at 23:22:58 GMT Monday, August 8, 2011
  System image file is "flash: c3750-ipbase - mz.122 - 35.SE5.bin".

  Cisco WS-C3750 - 24 p (PowerPC405) Prozesseur (D0 revision) 118784K / 12280K bytes of memory.
  Card processor ID CAT0847N0Y3
  Last reset of tension
  4 virtual Ethernet interfaces
  24 FastEthernet interfaces
  2 gigabit Ethernet interfaces
  Password recovery mechanism is activated.

  512K bytes of memory simulated by flash not volatile configuration.
  Basic Ethernet MAC address: 00:12:80:65:94:00
  Number of the motherboard: 8312-73-05
  Power supply part number: 341-0029-03
  Motherboard serial number: CAT08470DDE
  Power supply serial number: LIT0841015S
  Revision number of the model: D0
  Motherboard revision number: A0
  Model number: WS-C3750-24PS-S
  System serial number: CAT0847N0Y3
  Top Assembly part number: 800-21982-02
  Top of page revision number of the Assembly: B0
  Version ID: n/a
  Revision number of hardware consulting: 0x0A

  SW Version SW Image model switch ports
  ------   -----  -----              ----------              ----------
  * 3 26 WS-C3750 - 24 P 12.2, C3750 SE5 (35) - IPBASE-M

  Configuration register is 0xF

  ---------------------------------------------------------------------------------------------------------------

  C3750-1 #sh logging

  * Mar 1 05:00:33: % SYS-5-CONFIG_I: configured from the system memory

  * Mar 1 05:00:33: STACKMGR-5-SWITCH_READY %: switch 3 is READY

  * Mar 1 05:00:33: STACKMGR-4-STACK_LINK_CHANGE %: battery Port 1 3 switch has changed state down

  * Mar 1 05:00:33: STACKMGR-4-STACK_LINK_CHANGE %: battery Port 2 switch 3 has changed state down

  * Mar 1 05:00:34: % STACKMGR-5-MASTER_READY: Master Switch 3 is READY

  * Mar 1 05:00:34: % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, state change downstairs

  * Mar 1 05:00:34: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Vlan48, change of State down

  * Mar 1 05:00:34: % SYS-5-RESTART: System restarted.

  Cisco IOS software, software C3750 (C3750-IPBASE-M), Version 12.2 (35) SE5, RELEASE SOFTWARE (fc1)

  Copyright (c) 1986-2007 by Cisco Systems, Inc.

  Updated Friday 19 July 07 19:15 by nachen

  * Mar 1 05:00:34: % SNMP-5-start COLD: SNMP agent on host C3750-1 shall be the subject of a cold start

  * Mar 1 05:00:35: % LINK-5-CHANGED: Interface FastEthernet3/0/22, changed state down administratively

  * Mar 1 05:00:35: % LINK-5-CHANGED: Interface Vlan1, changed state down administratively * Mar 1 05:00:33: % SYS-5-CONFIG_I: configured from the system memory
  * Mar 1 05:00:33: STACKMGR-5-SWITCH_READY %: switch 3 is READY
  * Mar 1 05:00:33: STACKMGR-4-STACK_LINK_CHANGE %: battery Port 1 3 switch has changed state down
  * Mar 1 05:00:33: STACKMGR-4-STACK_LINK_CHANGE %: battery Port 2 switch 3 has changed state down
  * Mar 1 05:00:34: % STACKMGR-5-MASTER_READY: Master Switch 3 is READY
  * Mar 1 05:00:34: % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, state change downstairs
  * Mar 1 05:00:34: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Vlan48, change of State down
  * Mar 1 05:00:34: % SYS-5-RESTART: System restarted.
  Cisco IOS software, software C3750 (C3750-IPBASE-M), Version 12.2 (35) SE5, RELEASE SOFTWARE (fc1)
  Copyright (c) 1986-2007 by Cisco Systems, Inc.
  Updated Friday 19 July 07 19:15 by nachen
  * Mar 1 05:00:34: % SNMP-5-start COLD: SNMP agent on host C3750-1 shall be the subject of a cold start
  * Mar 1 05:00:35: % LINK-5-CHANGED: Interface FastEthernet3/0/22, changed state down administratively
  * Mar 1 05:00:35: % LINK-5-CHANGED: Interface Vlan1, changed state down administratively

  The bugs that I've provided are also associated with stand-alone switches, I can't share bug internal details.

  I've seen this problem before, & I understand that it is a standalone switch.

  Most of the time that it would be because ports of defective battery which can not really be detected there software. I also looked at the case attached to the bug & found a few similar cases.

• Said updated stand-alone Windows Setup program do not apply to this system.

  I tried to download and reinstall the stand-alone windows installer, but get the message that no update available for this system or this download does not apply to this system.  Standalone Installer, I think it's a system XP instead of Vista Home Premium 32 bits of the system. How can I uninstall the stand-alone Windows Installer and install one for Vista?   Is it important that I have a desktop computer that has XP on it?  I also rename the laptop with the Vista program to my name. Is it relevant. I tried to reverse the name

  Hi Rockyakauke25,
   
  Welcome to Microsoft answers community forum!

  This day stanalone you trying to install?

  Try to install the update in safe mode.

  Try to install the update in safe mode and see if you are able to install. Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  To start in safe mode, follow the steps below:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2   , do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  Install the prerequisite updates before applying a new update that is installed sp 1 for a successful installation sp 2.

  See the link for download of SP1 and installation

  http://TechNet.Microsoft.com/en-us/Windows/bb738089.aspx

  Try to run the system update readiness tool before installing the SP1 or SP2.
   
  The system update tool:
  http://support.Microsoft.com/default.aspx/KB/947821
   
  A software update is available for the Windows Vista installation:
  http://support.Microsoft.com/kb/937287
   
  Then download and install Service Pack 2:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en
   
   
  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Problem with stand-alone application

  Hello. It's my first time here in NOR. Need for support from the masters. This is the situation.

  Main problem: image display

  When I try to do a stand-alone application, the "image display" vi will not work. I'm missing DLL here? Nothing seems wrong with the vi or the vision. I can make KING in the external window, etc.

  I also tried to make a simple program that displays a white image using the image Board, but there is still no display.

  I can also ask what dll is required to make a labview program stand alone with vision and imaq.

  Hello

  To deploy an application that uses the functions of the Vision Development Module, you need the runtime of the Vision and a license of execution for this on the deployment computer. If you use the NO-IMAQdx driver for use with firewire and GigE cameras, you also have a license for Acquisition of Vision software on desktop deployment.

  If you do not use the functions of the Vision Development Module or driver OR-IMAQdx, all you would need is the driver OR IMAQ. The Image display control began with NOR-IMAQ 2.6, so make sure that you install a version of NOR-IMAQ that supports the control of display Image and LabVIEW 7.0 on desktop deployment. Please refer to this Web page to check the compatibility of the versions of NOR-IMAQ and LabVIEW: http://digital.ni.com/public.nsf/allkb/6B55FF09D1FBD3108625719600650B7C?OpenDocument .

• How can I control external devices using a stand-alone touchscreen with a LabVIEW app

  For my senior project my group design and created a vehicle for extended range hybrid with 90 Li + battery which is charged by a 15 kW generator and/or who is also charged by a 5 kW fuel cell. Currently, our system is able to measure the tension on batteries and display them on a laptop via LabVIEW. To process these data, we use a cRIO FPGA. What we would like to do now, is having a touch screen for the pilot to choose which loads of source of battery power so that monitor a pressure reading from the fuel tank.

  What kind of touch screens to LabVIEW to be downloaded on and used for controls?

  A cRIO has the necessary capacity to supply such a screen and handle the transfer of the data from the sensor fuel and relay (for turning on and off will deepen)?

  Do I need an additional license to create stand-alone applications and how I would go about creating a stand-alone application?

  Sorry for the question as much. Any help with the answer. Thank you!

  This looks like a very interesting project.  If you are interested, National Instruments organizes an contest of Design student where you can win cash or a trip to Austin for NIWeek.

  steve215 wrote:

  What kind of touch screens to LabVIEW to be downloaded on and used for controls?

  NEITHER sells computers touch screen that can be used to control LabVIEW applications.  You can find more information here: HMIS and industrial touch panels and here: LabVIEW Real-time and Touch Panel Deployment and replication resources. Our computers 6-inch touchscreen , run Windows CE, programming on them is a little different from the programming on a full Windows operating system.  You can find useful getting started with LabVIEW Touch Panel Module .

  You can use third-party with the LabVIEW Touch Panel Module devices, although it takes a deployment license for it.  More information can be found in the getting started guide.

  If you were able to send the information of cRIO on a network (which according to your description, seems unlikely), you can use a smartphone to control your application.  More information on our community of Smartphone group.

  steve215 wrote:

  A cRIO has the necessary capacity to supply such a screen and handle the transfer of the data from the sensor fuel and relay (for turning on and off will deepen)?

  If you use the 6-inch touchscreen panels, they need 18 to 32 VDC (the fuse becomes an open circuit if the input level exceeds 33 VDC).  The transfer of data from the switching relay can be monitored and changed with the touch screen.

  steve215 wrote:

  Do I need an additional license to create stand-alone applications and how I would go about creating a stand-alone application?

  If you have traveled the road of the touch panel, you need to purchase the LabVIEW Touch Panel Module and a touchscreen.  Touchscreens OR have a touch panel deployment license.  Guides step by step to create the stand-alone application are in the getting started with LabVIEW Touch Panel Module .

  Kind regards

  Elizabeth K.

  National Instruments | Sales engineer | www.NI.com/support

• Using PHP to develop stand-alone applications

  Hello, is it possible to use my existing PHP skills to develop a stand-alone application for the PlayBook? (offline)

  There is a product called Adobe ' Flash Builder for PHP ", but after having waded through tutorials, I'm not sure if this is the right product. Tutorials mainly speak on the development of a web application that allows the connection to the server live, which is not what I want.

  No, PHP is a language server side, not for applications on the client side. If you know PHP you know probably HTML5/JS too, then WebWorks would probably be the best place to start. If you want to go on the road to Flash/AIR, you will need Flash Builder 4.6 (standard or premium will do) or Flash Professional CS5.5.

• Forms 12 c - Application-stand alone launcher - jar files / window cmd

  I installed forms 12 c and everything works fine.

  I decided to use the stand-alone launcher feature by downloading the frmsal.jar and configure a shortcut. For example: -.

  java-jar frmsal.jar - url " " http://myFormsServer:8888/forms/frmservlet? config = fsal "t - 30000 .

  I have saved this in a .bat file.

  I have 2 questions: -.

  (1) I noticed that the performance of the frmall.jar is downloaded to the local client. However, all other jar files customized are not downloaded from the server. I have to manually copy these to the customer or is it still requirements to do it automatically?

  (2) when the autonomous Launcher is running, I now have a cmd window and the form. Y at - it an option to hide the cmd and the form window is displayed on the client?

  Thanks in advance

  Richard

  
  

  (2) try this

  Start javaw-jar frmsal.jar - url "http://myFormsServer:8888/forms/frmservlet?" config = fsal"t - 30000

  (1) I have a few custom pots and everything works fine. You put them in $ORACLE_HOME/forms/java?

  Concerning

  
  

• registered as Lightroom CC despite the fact that I am a user of Lightroom in stand-alone

  I acquired the stand-alone version of Photoshop Lightroom (Lightroom 6).

  I installed it on my desktop and it works very well.

  But when I try to update my software online, I find that I'm automatically offered to download the CC:

  

  I checked my registration and discovered that I am registered as a user of Lightroom CC.

  

  How can I change my status and make sure that I download the relevant updates?

  Thank you very much

  Kind regards

  Eitan

  Adobe Creative Cloud Desktop App, which is represented in your first post and capture, first screen doesn't know how display LR by any other means other than CC. Screenshot of your information system shows that you run LR 6 and not the CC version.

  Both programs are exactly the same download and the exact same file installed on your hard drive. The difference comes from how you sign in the program. You are signed in to version 6. In other words, the Adobe ID you use is not associated with a subscription package.

  You can remove this creative application Cloud Desktop of your computer, it is not necessary. Use this link to check and download updates for LR.

  Update of Lightroom

• Stand-alone folio for Tablet windows

  Hi, I have a client who wants to present a folio of his tablet of Surface and asked if he can have a stand-alone on its device application.

  Is it possible to do without going through the Windows store? I'm relatively new to DPS and have read something about sideloading, but not sure that I am on the right track.

  Any advice would be welcome.

  Thanks Chris.

  Microsoft does not require a developer paid account if you want to just install a test on a device application. You can either use Adobe Content Viewer to display the folio, as suggested by Christophe, or you can use App Builder to create a custom application. Then your customer can just install this custom application on their Windows machine following the instructions in "Test application" to the https://helpx.adobe.com/digital-publishing-suite/help/windows-publishing-guide.html.

  When you build the custom application, you can put what you want in the areas main package name and ID of the Publisher identity. Just make sure that Publisher ID that starts with "CN =".

  Neil

• Using a stand-alone WebLogic Server instance - ADF Insider issue

  Hello
  
  I just watched the [use a stand-alone WebLogic Server instance - ADF Insider | http://www.youtube.com/watch?v=yGSR6dwd3nw] video and I gave a try installing the WLS in my dev machine.
  
  Unfortunately I can't see how to do a run/debug jspx page right click in the WLS newly installed and configured.
  
  Note that the wizard will create a server connection Application under the radio button in the built-in Server displays "a built-in server can be started and stopped by JDeveloper. That applications can be deployed automatically to the server with the command run or Debug ... "but running a jspx always begin it pre-configured"IntegretedWebLogicServer"and there is no option to choose where to run from nor I see any configuration in the project properties.
  
  Could you please give me the missing indication?
  
  Yiannis

  Hello.

  First of all, thanks for watching the video. To specify the server of an application will run on, simply open the application properties and go the the Run category. Then select the appropriate drop down list WLS forum link to the built-in application server .

  Best regards

  Frédéric.