Display of the color after treatment in grayscale image

Similar Questions

• The colors after a Trace of Image replacement

  Hello world.

  I just used the trace of the image to get a vector of three colors of a photograph. I want to replace the three colors in the image with the colors of the brand style guide. For the moment, they have thre nuances of a sort of muddy Brown.

  Any ideas I do this? The three colors in the image are not displayed in the swatch menu and I don't really know what I'm doing. :-(

  Any help would be greatly appreciated!

  FC

  expand the trace, and then take a look under Edit > edit colors > work changed. Well, you might be able to figure out the rest.

• The bad language displayed on the LCD after you set up the printer

  HP Photosmart C4450 all-in-one printer Solution Center keeps popping up the following:

  "The wrong language displayed on the LCD after you set up the printer.

  The printer has been upward and works well for months and all of a sudden it stopped working and refusing to speak English.

  It is totally insensitive to one of the buttons pressed. The LCD screen is white and gray just glowing.

  How can I solve this problem?

  Thanks in advance for any help.

  Hello

  I don't know how your printer got himself into this difficult situation, but I think a reset should back you on track.

  I think this could work to its original factory settings to install your printer.

  To do a complete reset follow these steps:

  1. disconnect the power cable from the back of the printer.

  2 do nothing for about 30 seconds.

  3 press and hold the Cancel & color copy, keep their detention now connect the power cord to the back of the printer.

  This should be left to the printer to the condition, it is in when you took it out of the box.

  I hope this helps.

• Photoshop no. 2014 CC more blue display in the color picker or the workspace, just violets.

  Photoshop CC 2014 is no longer display in the picker and colors on the screen only purplish, etc. magenta, blue violet. I think it started about 3 days ago. Our current model 2.9 GHz iMac with NVIDIA GeForce GT 750 M 1024 MB Graphics Card, 8 GB of RAM is calibrated to 100% by Spyder 4 Express and that is reflected in all applications except Photoshop CC 2014, so I know it's not the monitor. Blue is the main color we use in many of our designs, so it is of the utmost importance. I really appreciate any help you could provide, if it is not corrected as soon as POSSIBLE, I don't know what we'll do.

  Thank you very much!

  OK here is the cure: Edit > convert to profile:

  

• Forms is displayed with the color when a form is called from a menu

  Hi all
  
  I've recently migrated all forms and menus of 6i to 10g As. Now, I have a menu with some menu items, and a special menu item called a form of it, and the called form has buttons which calls another form of it even.
  
  The problem is, when I call the shape of the menu item, the form is displayed with a color. I mean the text Element and push button are colorful. And of the shape called if I press a button that calls back a form, or even the 2nd form called appears the color. (Same color appears in all forms).
  
  But the Forms seem to be color when the form is called directly ( not through any form or Menu ) just passing form name in the URL.
  Also checked the property Palette and doesn't seem that any color specified anywhere.
  
  What could be the problem?
  And what all (in the property Palette) should I need to check this?
  
  Published by: Charlie on April 13, 2011 10:31

  and what color is? If it is gray, it sets with the gray of co.or?

• Is there a way to display all the colors of the site, including "States" so I can taste of each?

  I need to be able to see samples of all colors I used in the site, and that I have not added to the Swatches palette.
  

  It is tiresome to have to go to text links and sample from each of the 4 States... more there are others that I have probably forgotten.

  Yes they save time.

  Open any page of your site,

  Open the swatches tab

  Right-click on an empty area of the swatches tab and select "remove all unused."

  

  Any color that remains is "used" somewhere on your site... Also note that changes to the color of this tab will automatically change any object of your site linked, for example, that all the Red objects can be quickly turned pink

  

• How to change the display of the color picker/color space?

  I wanted to change the view of the color picker/color space to what it looks like in other Adobe programs. I got the habit to use the selector of color from other programs and I had problems with the appearance and function of this color view.

  In InDesign, the color picker looks like this:

  

  And the Photoshop/Illustrator/etc looks like this:

  

  I tried to change the "convert to profile...". "and the fusion of transparent space, but have done anything about what I want to do.

  Is it possible to change this in InDesign?

  Note: I want to change the appearance of similar gradient box if it is not obvious.

  Rob,

  You're wrong. If you are on a Mac equipped with suitable equipment and that you use the latest version of InDesign, you have animated Zoom. See below:

  

  I wrote about it here:

  GPU and animated Zoom support arrives (for the Mac...

• The color of threshold IMAQ blank image

  I'm doing a base color threshold program, but the result I get is an empty image, but only when I create the display in the Panel before me. When I copy the color Thresold.vi example screen output, it can display the output of the binary image.

  What is the difference between the output of two screen? How can I make this possible without having to copy from anywhere else?

  

  Looks like you have to select the binary Palette to the display image control that you create:

  

• P7-1298cb: Multi-color flickering lines in columns displayed on the screen after upgrade Windows 10.

  I upgraded Windows Windows 8.1 1O.  I've updated the drivers.  The monitor multicolored poster of fine lines in columns.  The lines of twinkle randomly.  The monitor is a diagonal LED of 2711 x 27 inch HP (XP600A) screen.  It is not that there is a specific monitor for Windows 10 driver.  Any suggestions on how to fix this?

  HI @TLL2016,

  Thanks for getting back to me.

  There is no update BIOS, but there is more recent graphics driver.

  Here is a link the download AMD UMA Graphics Driver.

  Just to check the monitor, here is a document for display quality problems.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Tecra A7-112 of display cannot display all the colors corectly

  Hi, I have the same problem with my screen than that of this post: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=14718&messageID=54000

  It seems that my screen may not display all colors corectly and it seems protected by a kind of tasks/works of art in most colors.
  Here is a picture, not so good but still, my question:

  http://www.Logicode.ro/test.jpg
  http://www.Logicode.ro/Test1.jpg

  You can see the first color - pure red it seems correct and solid but second it - a small red varation there artifacts / protected by a kind of tasks.

  I learned that it is a problem of dithering that can be set in the BIOS.

  For the Satellite A100-237 the problem has been resolved by downgrading to an older version of bios, but what can I do with my laptop Tecra A7-112? :|

  Post edited by: eStatic

  Hello

  Have you checked whether the BIOS most recent update has been published on the driver page?
  I put t know if it helps but you can also try to update the display driver.

• Why the colors mix into the paint after you save an image?

  After I recorded a new image in paint, some colors are distorted and mixed together. They have pants air. If something was originally a solid color, for example a pink box next to a blue zone, when I open it after that I have recorded the two colors of the boxes would be sort of a model gardiant and partially mixed between them. Is this normal? Is it possible to stop him?

  Hi wishbigmoc,

  By default in Microsoft Paint save setting is jpeg.  When you save a JPEG using paint quality is very low and it is not an option to change the quality setting.  You can change the option record under when you save your 24-bit Bitmapor PNGfiles.  Using one of these options will allow you to keep the quality of the original file, but save the file size will be much larger it would be if it was saved in jpeg format.  There isn't really anything else you can do insofar as going to save the file as a jpeg file.  you still going to lose some of the quality.  Please let us know if you have any other questions.  Thank you. Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All the colors I select end grayscale. How can I fix it?

  I am trying to color in a photo in levels of gray that was sent to me, but whenever I take a color like yellow it ends around the top white or blue becomes dark gray, etc. Photoshop is simply this automatically, I don't know how to disable or enable this.

  I use a PC and a Wacom tablet, if it helps.

  Most likely, you will need to move the image in grayscale mode to RGB color

  Image > Mode

• How to render the message displayed by the DB after a deletion?

  Hello
  
  I do a page which wil remove the values in a table. I want to display messages that oracle displays under sqlplus after a deletion, for example '50 lines deleted'.
  
  How to do?
  
  Thank you for your kind answers!
  
  Christian

  As mentioned in the previous post, can you please check if the branch corresponding to the process of deletion (under Branches of page) has the "message of success of process to include" enabled.

  Thank you
  Manish

• success message to display on the homepage after you close the popup skillbuilder page

  Hello

  I try to add a quick success message appears on the home page after clicking on "Apply/Save" on the page open popup. I created a popup page using popup skillbuilder plugin using two links "Edit" on the report and create a button to popup new entry record page,.

  Description: on my main report page 1 I "edit" links and create button what up page2 another pop-up windows but I want to show the success confirmation message on the page1/report after you apply the modification/creation of a record a closed time page2/popup how can I achieve this?

  using apex 4.2. Can someone please help with that?

  Thank you.

  I got it with a few tips... closed jQuery.

• Forms, controls the display of the page after Submit

  Using Dreamweaver CS5.  Train with the results sent that email work very well (using php on the server side).

  But after a click on the button send the user is immediately sent to the homepage/index.html (which is not where the form is located).

  The question is: How can I control what happens after you press the submit button?  For example - the page of the form erase everything and stay

  There, go to a different page, etc.

  Thanks for any help!

  D212

  If I change the script can just point to an html file? (ie the header ("Location: http://www.example.com/your_landing_page.html"); exit();?)

  It would be perfect.