Display of weathermap

Similar Questions

• Reminders do not display or stick to the lock screen in iOS10

  IOS10 (10.0.1 and 10.0.2), on an iPhone (I use an iPhone 6), reminders are no longer reliable. I had several cases where the callback doesn't show even on the screen lock and many more times when the recall won't 'glue' to screen lock for more than a short period. Before iOS10, when you said to remind you at a certain time or place, the recall would display on the reliable lock screen until she has been marked as "completed".

  It is a major issue for people who depend on the application for the important tasks and calendar. There is a thread of any discussion on this point, for some reason, has been marked as "solved" even if a large number of people continues to post telling him that there is a problem for them too (as the thread located here). I wanted to start this new discussion which we hope will remain open until it is effectively resolved.

  Thank you!!! This is a HUGE problem!

  Since the update I had to reboot my phone EVERY day.

  Is the stick of reminders... or they do not. Lately they don't yet show upward. Then other things stick to the lock screen can't get rid of.

  Currently this feature on the phone is USELESS

• Attached a letter not displayed

  Since I installed Sierra some attachments in the e-mail application do not display you can see that a letter to them.

  Sierra sometimes omits the last accessory and where there is a single attachment is it still missing.

  It seems to fail if the account is configured for IMAP access. POP access is not the problem. Better send Apple. Go to http://www.apple.com/feedback/macosx.html and em let know.

• You can dim the brightness of the display of the alarm

  I tried the alarm on my new Apple Watch. The screen lights up a few minutes before the alarm sounds. It gradually increases in brightness. The problem is how bright Gets the display before the alarm sounds. He woke up before the alarm - it was like a flashlight shining in my eyes. Is it possible to adjust the brightness levels fir alarm?

  Try adjusting the brightness slider > https://help.apple.com/watch/#/apd62807a9f3

• Display Rotation error

  Hello

  I had a problem with the rotation of the screen under macOS Sierra function. As the screen rotates, there is an error that pop up and later that I'm unable to get into system-> Display Preferences. It is for me a "mistake preferably: County not load display preferences" message and I was unable to rotate the screen back. I started from the system in safe mode and temporarily solved the problem. But if I want to rotate the screen again, it pops up the same error again. I was using the rotation function pretty well in OS X El Capitan. But since I updated to macOS Sierra, I had this problem.

  I wanted to know if there is a lasting solution to this problem.

  I'm using macOS Sierra on MacBook (13-inch, early 2015) Air with processor 1.6 Ghz Intel Core i5 and 8 GB memory DDR3 at 1600 MHz with 128 GB of storage.

  Hello PavanGJ,

  Thank you for using communities Support from Apple. I see that since upgrading to Mac OS Sierra problems of screen rotation. The preferences window does not. I know how it is important for your Mac to work reliably. I'll be more than happy to help.

  Great job to test mode without failure. In Safe Mode disables most of the third-party services, it could be a compatibility problem with an application that you have. Check out this article:

  OS X El Capitan: If you have problems with startup items

  You can not hold account that the title suggests it's to El Capitan. It applies to macOS Sierra as well.

  You can also test the issue in a new user account.

  How to test a question in another account on your Mac - Apple Support

  Let us know if that helps.

  Take care!

• Display of original filenames of the photos?

  My older photos have file names that provide a description of the content of the photo.

  In the latest version of Photos for Mac, only a limited number of characters is visible in the details pane.

  is it possible to display the full name of the original file to the photos? (There used to be an option "Show in Finder", but that seems to have disappeared).

  Thank you

  You can click the Info Panel file name field, enter ⌘A to select all, then copy and paste the name of the file where you want, for example, the title field or description.

  The title will be shown, if you enlarge the photo.

  Added:

  I love PowerPhotos.  This companion Photos app allows you to view the pictures in mode list like Aperture, and and you can display the names of files and other metadata in list or display filenames under thumbnails.

  For example:

  

• the iOS 10 not displaying calendar widget is not the events

  After the update to iOS 10.0.2, the calendar available on the lock screen widget does not always display the events. Nor the duration of the event or the event name appears, but a white widget with calendar color bar can be seen.

  This is not always the case, but very often. For ex, if you open the calendar application, then check this widget, event, but after that you lock the screen and check again, it would disappear.

  Hello jyothishureth,

  Thank you for using communities of Apple Support. It is my understanding from your iPhone Calendar widget still shows no events. I use my daily calendar to keep me organized. I can understand your concern. I'm happy to help you.

  If you haven't done so already, I recommend that you restart the phone. This can solve many unexpected behaviours. Follow the steps below:
  

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo

  Restart your iPhone, iPad or iPod touch

  If the problem persists, try to remove the widget and adding it back on. Use the following steps:
  

  1. Right above the home, lock screen or Notification Centerscreen.
  2. Scroll down and tap on change.
  3. To add a Widget, press on . To remove a Widget, press on . To reorder your Widgets, touch and hold next to the apps and drag the in the desired order.
  4. Finally, tap done.

  Use Widgets on your iPhone, iPad and iPod touch

  Have a great day!

• Thunderbolt display don't wake up since I installed Sierra

  I have a Mid-2012 13 "Macbook Pro with a Thunderbolt display. After that I installed MacOS Sierra, my screen often wakes up not when I hit the mouse or the keyboard. I can usually solve the problem by simply unplugging the display Plug and then plug it back it - very annoying. I searched for solutions to this problem on the web and tried everything to reset NVRAM and SMC, reset the display, memory even deleted some plist files obsolete, but the problem persists. Someone at - it similar problems, of the solutions.

  Same problem AGAIN!

  This error has been there before after an update of macOS, seems he's back.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Why does my IPad display 9.3.5 as current

  Why my IPad displays the current version 9.3.5 and no availability for upgrade?

  Probably because it is not a model in this list of the 10 iPads iOS compatible:

  • the iPad Pro 12.9 inches
  • Pro 9.7 inch iPad
  • iPad 2 Air
  • Air iPad
  • 4th generation of iPad
  • mini iPad 4
  • iPad mini 3
  • iPad mini 2

  TT2

• Thunderbolt display is no longer detected

  I have a late 2013, MacBook Pro and a 27 inch Thunderbolt display, bought in September 2014. I use the screen without problems since then. But today the display is no longer detected. I got the MacBook disconnected from the screen, which has been briefly disconnected from the sector. (It was a power outage scheduled as it happens, but I don't see how that makes a difference).

  Now, when I connect display of the power of the lead part works fine but the screen does not illuminate. To the search, in the report of the system, the Thunderbolt Bus shows two Ports both with "no device connected". I have a Thunderbolt ethernet adapter and shows.

  I tried all the usual troubleshooting steps: disconnected power for a few minutes, resetting the NVRAM, reset SMC. A ran Diagnostics from Apple on the MacBook - all very good. I don't know what I can do. The Thunderbolt connector is slightly warm to the touch, which I think is always the case.

  Everyone you have other ideas please?

  Hey donnysp,

  If I understand correctly, the external display Thunderbolt is not recognized by MacBook Pro.  Looks like you already have a troubleshooting. I recommend you to read this article, it may be able to help solve the problem.
  
  

  Check the connections on your Mac and external screens:

  • If you use an Apple laptop computer, try to connect the AC adapter.
  • Make sure that the power cable from the external display is connected correctly and that your display is enabled.
  • If you are using a Mac Pro (end of 2013), make sure that your screens are plugged into the right ports.
  • If you use a hub of display, Cabinet or "KVM", try to connect the video cable from your screen directly to your Mac instead.
  • Unplug the video cable where it plugs into your Mac, then reconnect to reinsert the connection.
  • If you are using a video card, unplug the video adapter on your Mac, then reconnect to reinsert the connection.
  • If you use multiple video cards to connect your screen (the cards are "chained"), testing connection of the screen by using a single adapter if possible. Some video cards may not be linked together. For example, a mini DisplayPort to DVI adapter may not be connected to an adapter DVI to HDMI.
  • If your screen has more than one video connection, see if you are using another connection on the display works. If possible, check if you use a different view or a different adapter works.
  • Try using another cable that you know to be in working condition. Check with the manufacturer of the screen to make sure that you use the cable they recommend.

  Get help with graphical problems on external displays connected to your Mac.

  Thank you for using communities of Apple Support. Have a good.

• How to display invisible characters (space, return, etc.)

  How do you do the Numbers (4.0) app shows invisible characters such as space and return transport?

  I'm not aware of a direct way to display invisible characters in numbers - regardless of the version.

• Cable/adapter for use of 2007 iMac as a display for 2009 MacBook Pro

  I would use my older iMac as a monitor for my MacBook Pro. Want to know which cable and/or adapter I need help.

  The iMac is a 24 inch, Intel based since 2007 (6.1). 2 GB, 667 MHZ.  It uses iOS 10.5.8. Its port is a Mini-DVI video output.

  The MacBook Pro is a 15-inch (5.4) 2009. 4 GB, 1067 MHZ. It uses iOS 10.11.6. Its port is a Mini display port.

  Popular Wizard. Thank you.

  You must use a wireless or Ethernet connection and configure Virtual Network Computing. A 2007 iMac only supports video-, and cannot function without the standard display cable.

  (145067)

• Presenter PowerPoint on Mac mini mode displayed on the screen and the projector when using HDMI splitter

  We have a Mac mini connected to a screen and a projector via HDMI using a HDMI splitter.

  It works fine for most applications, but during presentations PowerPoint, presenter is displayed on the monitor and the projector.

  When I disconnected the mini Mac's HDMI cable and put it in a MacBook, the presenter appeared on the MacBook screen (as it should) and only the slide appears on the screen and on the projection screen.

  Of course if we have to use the MacBook for presentations instead of the Mac mini, you would need to have seen the presenter on both the screen and on the screen of the MacBook.

  In the Mac mini display preferences there is no button to "Gather Windows" when the Mac mini is attached to the screen and the projector via HDMI splitter is a tab "setting."

  But these two things appear on the MacBook when it is connected.

  Any help would be greatly appreciated.

  Thank you!

  Mike

  

  

  I'm confused. When you use a video separator the same screen will appear on the two monitors connected to the separator. This is how works a separator

• Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  If she don't remember: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports