Display on monitor

I haven't changed any settings yet all programs and Web sites on the internet and offline display extra-large onmonitor two horizontally and vertically which makes it unable to see the entire screen which can make?

I haven't changed any settings yet all programs and Web sites on the internet and offline display extra-large onmonitor two horizontally and vertically which makes it unable to see the entire screen which can make?

Laptop or desktop?  If the office, what size and type of monitor?

Right-click on an empty space on your desktop and select Properties.

Click the settings tab.

What does say under "Screen Resolution"?  Move the slider to the right to make things appear smaller.

Tags: Windows

Similar Questions

  • No display on monitor HPx2301 when connected to my MacBook Pro - Snow Leopard OSX

    Product: HP x 2301 Micro thin backlit LED display

    Host: Apple MacBook Pro i7 QuadCore (MacBookPro8, 2)

    Connector: Crush / MiniDisplayPort (miniDisplayPort to Apple to DVI)

    Operating system: OS x 10.6.8 (Snow Leopard).

    When I try to connect my new monitor with my 15' MacBook Pro I7, scans for a signal (DVI, HDMI, VGA) monitor, can't find one, the message "monitor going to sleep" and then stops.  The Mac detects the monitor but just for a short period.  He sometimes displays in the "preference screen Panal" (sometimes quite long for quite a long time to manipulate its parameters, but then it can detect is more invested)

    The Documentation provided was not at all no mention of Apple or OSX.  The copy of the ad does not mention a single restriction WindowsPC

    -How can I make this work with my Mac equipped crush (I did not in an HDMI cable yet because I want to confirm that the monitor __should__ be able to work with Apple equiipment.

    I discovered via permutation of another working pc/display combination cable, the DVI cable supplied with my new monitor was faulty (it was the first time I tried to use it-directly out of the box).  I will try to replace as a warranty repair.

  • Pavilion DV6015US lost his display and monitor after winning 10 improvement!

    Information system shows adapter display as basic display adapter Microsoft and display generic PnP monitor.

    RELOADED Nvidia drivers with no result (no is NOT update Bios... hmmm)

    BobO'B

    I'm sorry that this driver has not worked.

    It's not like you can start in safe mode without seeing the display.

    Try to boot from the W10 installation disc and select Repair and see if you can get into SafeMode like that.

    I can't find info on how to go in safe mode by pressing a key of function like in the good old days.

    http://www.thewindowsclub.com/boot-Windows-10-in-safe-mode

    So I recommend you reinstall windows 7, because if this graphics driver did not work, none that I know of will.

  • After droping the keyboard display on monitor is upside down. How can I change cela return

    Thin key board functions and the monitor did not.  Somehow the combination of right button on the key Board was struck as the wireless keyboard was expelled to the word of our 5 month old baby.  The display is now upside down, I was hoping someone might know how to fix this problem. At the age of 70 years it's hard to hang upside down to check my email.

    Press and hold the Ctrl + Alt keys and use the arrows to rotate back.

  • How can I change the position of am I display on monitor

    accidentally hit a key or keys on the keyboard which has transformed my screen 90 degrees.  am now looking at a screen on the side.  How can I get it back to normal?

    Hello

    Please see the post has responded since the thread below that may help you resolve this problem.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/help-i-rotated-the-monitor-display-by-90-degrees/95ad7421-2C19-459B-af72-44cc4bf6d7d0

  • Given that the automatic updates of display on monitor goes outside the borders of monitor__

    After you install the microsoft upgrades, the display on a monitor is incorrect.  Can not see all the information.  Edges are cut off.  How can I fix it.  Tried the restore of the system did not work.

    Looks like you have installed video drivers from Windows Update. It's always a bad idea, and now you know why. You can try to roll back the video drivers for those who worked or simply reinstall drivers.

    Never get the drivers from Windows Update. Bring:

    1. site of the device mftr. ; OR
    2. site of the card mother mftr. If the material is on board; OR
    3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

    Read the installation instructions on the Web site where you get the drivers.

    To find out what hardware is in your computer:

    1. read all documentation that you got when you purchased the computer.
    2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
    3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

    http://www.belarc.com/free_download.html - Belarc Advisor
    http://www.gtopala.com/ - System Information for Windows

    If you have installed the drivers from Windows Update, you can roll them back:

    Roll back troublesome device drivers in Windows Vista from the how-to Geek - http://tinyurl.com/346lox

    Then, change your settings in Windows Update automatic "download and let me know when updates are ready". In this way, you can Watch what you install and uncheck the box driver updated. If you have driver updates, you can right-click on it and choose to hide the update if you don't get it again. MS - MVP - Elephant Boy computers - don't panic!

  • economy on screen display timeout monitor energy function doesn't work properly with windows 7

    running Windows 7 ultimate 64 bit RC. When I connect my new LCD Acer X 223 that just built system I have a question. on the function of delay display the screen of the monitor is a feature that goes to a black screen after awhile... to save energy which is adjustable up to 2 hours via the menu of the monitor. The time-out period is supposed to restore the screen a few seconds after a mouse is moved or a key. Is not... restart only restores the display on the screen. Support of Acer said that it is a bug in windows 7. Is it possible to control or to disable this feature of the operating system? It is the first day after the building of the system with the Intel DG45ID motherboard and Intel Quad processor. I found that running a webcast in the background keeps the system of locking me... when a web show is still active, the screen turns off after a certain time (time determined by osd menu timeout on screen) but function returns normally when a key is pressed or the mouse moved. Without this or something else running the keyboard or mouse cannot return to the screen.

    If it's a bug, Acer will repair before Oct22nt. I would look to Windows Update for the news about the availability of driver for the Acer chipset.

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • Can I change my Start menu, the icons on the desktop (shortcuts) to my TV screen and displays both monitors so I can see different things on each monitor

    I have an old Dell Latitude E6500 running Windows 7 Pro and think my screen on my laptop is going to bite the dust and can't understand how to show my start menu, desktop and screen icons (shortcuts) on my flatsceen TV, so I could still run the laptop if the monitor on it turns off, without duplicating the image which limits me to not be able to have different things on each monitor as in "extend displays it" does

    Hello Tony,.

    Thanks for posting your query on the Microsoft Community.

    I suggest you follow the advice given by Ralf_G answered September 25,2010 from the link given below and check if that helps.

    Reference:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/extend-displays-not-working-in-Windows-7/30828f33-5a64-4e22-AD70-b3bd8e6d8580

    Hope this information is useful. Please let us know if you need help with Windows.

  • When the phone's main display large monitor display area is reduced

    I have two monitors - my laptop and another, big screen. For a particular project, where I you will record a demo on a remote desktop, I want my laptop to be the main display, so I can easily access other applications and my large monitor to be the one where I discover and record the remote desktop. The problem is, once I do the laptop the main screen for some reason any viewing on the big screen area is reduced: there is a black rectangle around the Windows desktop, 3 "wide on each side and 1-1/2" up and down - which totally defeats the purpose of having a large screen on which to run the application I want to save you. I use Windows 7, with the extended display setting. Help?

    If it is in expansion mode, then you can open the screen resolution and the resolution for the external monitor to the native size (large) and it should be good.

    1. Right click on your desktop, choose the resolution of the screen.
    2. Click identify and note what image of monitor in the dialog box is made for your big screen
    3. Click this monitor in the graph at the top of the dialog box, then change the cursor to resolution at full resolution for this monitor.
    4. Click on apply.
    5. Note: your wallpaper image may not fill the entire screen, so there may still be a black border on the desktop only, but you can use the full screen area.
  • How to change the ID ID/monitor display or erase display ID/Monitor ID Windows 7

    Have a problem that sometimes appears.

    Setting up workstations to work with multiple display monitors, its part of my job...

    The real ID monitors get Windows isn't usually a problem, most programs can adapt to the windows settings and fine.

    BUT some of the systems we run sends commands and tips based on the actual number of the display, the number which appears on the screen when you click on the button "identify" in the Office/display-settings of the control panel.

    Allows to call the ID of display equipment

    the computer, or windows remember display´s EDID and stores the monitors already plugged into a list?

    If I installed the monitors/screens in the order correct, everything is good and works as we wanted.

    Then, it happens a brakes display or switch place for a reason, or perhaps a driver update resets the display list and windows starts now monitors in the wrong order.

    the monitor 1 want to have HW - ID 1 to now HW - ID 2, and everything is false, messages and orders now find themselves on the wrong display.

    We have 3 options.

    1. fix the HW - ID display

    2 - re - configure the system and what it includes and hope that he will not return to the display switch change or updated driver.

    3 - re - install windows and hope that it shows the correct ID and continue with client applications and so on.

    I discovered that it is stored somewhere in the REG-Edit, but it is impossible to find the right place

    After talking to HP, they do not support such things... try windows-problem, with a clean install... c - my I switched to a screen!

    Tried to clean facilities of AMD and Nvidia driver for graphics cards, worked for a time, until I restarted the machine, back to square one...

    Then they ponited at Microsoft.

    After talking to Microsoft Support they do not support such things...

    I don't have the skills, but I can't be a problem with a script that removes the EDID reg-edit list after a reboot?

    then it would be not so complicated, simply:

    Unplug everything except the display that you want to be number 1
    Run the script

    reset

    connect the display 2 and so on?

    Hello

    I understand that you are not connected to the domain. But it seems you're a developer and you try to change the logical numbers of monitors/screens. This is why it would be better suited in MSDN Community.
    http://social.msdn.Microsoft.com/forums/en-us/categories

  • computer laptop display on monitor Dell

    I have a U2410 monitor with a HP desktop computer. Also have a laptop Lenovo T520. I want to connect the laptop to the screen, so I can watch 24 inches instead of 15. I tried to connect the laptop to the display with a VGA cable, but nothing was detected. Try catalyst, but that didn't detect anything. Then I tried a Display Port cable. Nothing detected. So how can you get a computer screen on a Dell monitor? Desktop is Win 7. Laptop is Win 8.1.

    * Turn off the laptop
    * Disable the U2410
    * Install = portable output VGA--> VGA cable VGA--> U2410 VGA port
    * Turn on the laptop
    * Turn on the U2410
    * Press the U2410 button 3rd from the top, "Input Source Select.
    * Choose VGA
    * Go into the video settings of the laptop and activate the extended mode

  • Comments by WinXP can cause higher res display my monitor?

    I did only 20 "(1680 x 1050) displays connected to the MacPro running Fusion 3.0.1 but I want to test an application in my Windows XP guest who wants to have a bigger screen."  How can I configure my guest to be higher than my physical screen display for example 1920 x 1200?  I know I've seen invited Linux have higher res displays and they appear nice and scaling down in vmware, but my Windows XP screen of the guest takes the dimensions of my vmware window and always displays pixels one for one.

    The image of the Virtual Machine window below was taken with grab and is 665 x 460 pixels (the actual size of the virtual machine window) but in the Windows XP prompt resolution is 1920 x 1200 and I turned on the magnifying glass, so I could show you the display settings dialog box showing you a higher resolution and a native resolution of my MacBook Pro is only 1440 x 900.  I was able to accomplish this by adding the following lines to the configuration of the Virtual Machine's .vmx file and the virtual machine must be stopped, not suspended, and merger closed when you edit the .vmx config file.

    monitor_control.restrict_backdoor = "TRUE"
    monitor.virtual_exec = "hardware"
    

    Note that you will not use some of the VMware tools works with these parameters added to the configuration of the file but it will lead to a higher resolution then the native resolution of the host and the Virtual Machine window.

    Now if you can work in mode full screen, then you should be able to achieve a higher resolution without adding these parameters, but I got the impression that you wanted it windowed so why the information presented.

    Where is the .vmx file search the help file for VMware Virtual Machine package or seek to collect Information for VMware Fusion

    Note that the status bar in the picture says that VMware Tools is not installed, but they are, and this message is a result of adding two parameters don't try so not install VMware Tools because the message is misleading in this use case.

  • Control (trigger) missing display on monitor... Model 70 d fast

    I had my 70 d for about 6 months, with no problems... until yesterday, when I pushed the shutter button halfway, the LCD displays the 'Quick order' menu for 3-4 seconds... This feature is missing...  I can press 'Q', & get the same... but it's embarrassing... I can toggle this display "ON" at all times, through the "info" button but I don't want that...  I even restored factory settings, after putting in a new battery...  I can't recover this feature... ??

    Hello Robiss,

    According to the information you provided, it can be better than our service center to evaluate your camera.

    You can configure the service through our web site here.

  • Multiple display (cloned monitor) and THE screen is pink.

    I'll try to clone my desktop on another monitor and my normal computer screen is the right color but the other monitor is ROSE!

    I checked the connection, and it is secure, ideas please?

    Appreciated :)

    Take your monitor to another computer and borrow the monitor from that computer to put on your.  That should quickly indicate if the monitor is bad or if there is a computer problem.  If you have two monitors are trying to exchange the first to the second and vice versa.

    "stevepayne1994" wrote in the new message: * e-mail address is removed from the privacy... *

    I'll try to clone my desktop on another monitor and my normal computer screen is the right color but the other monitor is ROSE!

    I checked the connection, and it is secure, ideas please?

    Appreciated :)

  • EliteBook 8560p - LG736EA #ABB: Elitebook 8560 p - no display + external monitor image at boot

    EliteBook 8560p, product number: LG736EA #ABB, out of warranty.

    I got 2 or 3 times in the past year, when the behavior was the same, but he dissapeard after a few minutes/hours.

    This morning once again:

    -When the startup everything works fine (I hear Windows startup sound) but no image appears on the computer screen or even on HDMI TV ("No signal" appears on the TV, it worked fine before).

    I tried a few suggestions as remove the battery + by pressing the power button for 30 seconds to reset-no luck online.

    I'm looking forward to see if it will work in the evening, but until now I need some advice:

    -would it be by a faulty inverter?

    -other opportunities outside the UPS?

    -What is the part number for the converter to display? link? I can't find it on http://partsurfer.hp.com...LG736EA but maybe my eyes were Misty :-)

    -J' have some assambling/desassambling experience, I guess I can DIY replacement of the ups, right? :-)

    All ideas are welcome :-)

    Thank you with respect.

    Hello

    computer science is not an exact science

    You have experience of course! But it is assumed that Service Center have more resources (pieces of overlap).

    The best solution in my opinion is the best solution.

    Of course will be better request a quote.

    Concerning

Maybe you are looking for

  • USB Thumb Drive (UHYBS-064GH) format/write protection fault

    Hello Hoping for help. Bought a 64 b USB Thumb Drive (UHYBS-064GH), a private seller, but the point is brand new in packaging. When I tried to copy files through him, he maxed out at comments 45Gig and seems to have caused a clerical error. I was abl

  • Import script and merging of multiple Excel worksheets

    I use a script written by NOR supported for import and merge multiple Excel worksheets. This works when importing data in the format, so that the script has been designed. The data format has now changed with a new added to the right column. This new

  • Windows Vista Home Edition of Windows 7 Ultimate

    I plan to buy Windows 7 for our desktop computer. Can I pretend I just changed the theme to 7 (for example all my files parameters and data programs and application) or is it a miracle that I can use any time or what I have to insert the disc and do

  • Java does not not in windows 7 x 64

    Hello I installed the latest version of java for windows 7 x 64... However, the java site is not able to detect java on my pc... It is said "DETECT java on your computer", and the blue circle continues to spin indefinitely...

  • A problem with Aten UC232A serial converter in windows 8

    I have still the problem mentioned earlier (on your site) with Aten UC232A serial converter in windows 8 update. The installation of Aten software stopped, because the installation program does not accept windows 8!