Display success or failure of the images only in the user interface custom

Similar Questions

• User interface customized to run at the same time?

  Hello

  My question is about the user interfaces customized for performances with the parallel model. In my current project, we use the parallel model with sockets to the UI and test 4, we have flags of chain for its execution, which displays messages to the user and the other 2 which has the function of a streaming indicator that displays information throughout the test, also showing instances of time. So, in total 8 indicators that display information about the 4 independent runs alongside. Up to now, I managed to create the user interface only for the sequential mode, using 2 simple string indicators and sending messages to the TestStand to the strings through the user interface Messages. My problem is that I don't know how to implement this feature for the sockets to test more.

  Attached images of the façade and the diagram of blog of the GUI as it appears now.

  I am very new to TestStand (I know that for the last month), so I expect that my question and description of cases are not so clear, so please let me know if anything is badly explained.

  I would be grateful for any help.

  Basically, whenever you get a message from UI associated with running (e.g. UIMsg_StartExecution, UIMsg_Trace, etc.), you will need to determine what testsocket the UIMessage applies to and then update the corresponding user interface controls. A way to get the testsocket is as follows:

  testsocketindex = uimsg. Thread.GetSequenceContext (0, frameId_Notused). AsPropertyObject(). GetValNumber ("RunState.TestSockets.MyIndex", 0)

  In addition, once you know where to go a particular run, you can attach to the control Id of this execution (i.e. property of Execution.Id) and just look at the execution Id instead.

  Hope this helps,

  -Doug

• Background image on the User Interface

  I'm trying to place a background behind my screen of the application image. So instead of the usual white, there would be a "background.png". I am following this thread with the blackberry API set

  http://supportforums.BlackBerry.com/T5/Java-development/drawing-bitmap-in-mainScreen-background/m-p/...

  So far, I tried to apply it within my own application, with the code to start as follows:

  final class UserInterfaceScreen extends MainScreen {
      HorizontalFieldManager _fieldManagerTop;
      VerticalFieldManager _fieldManagerMiddle;
      HorizontalFieldManager _fieldManagerBottom;
      BitmapField _bitmap;
      Bitmap _canadaImage, _ukImage, _usImage, _backgroundBitmap, _fieldBitmap;
      LabelField _label;
      BasicEditField _input;
      String _canadaCapital, _ukCapital, _usCapital, _capital;
      int displayed = 0;
  
      public UserInterfaceScreen() {
          super();
          LabelField title = new LabelField("User Interface Sample",
                  LabelField.ELLIPSIS | LabelField.USE_ALL_WIDTH);
          setTitle(title);
  
          HorizontalFieldManager _horizontalFieldManager = new HorizontalFieldManager(HorizontalFieldManager.USE_ALL_WIDTH | HorizontalFieldManager.USE_ALL_HEIGHT){
  
              //Override the paint method to draw the background image.
              public void paint(Graphics graphics)
              {
                  //Draw the background image and then call paint.
                  graphics.drawBitmap(0, 0, 640, 900, _backgroundBitmap, 0, 0); //240
                  super.paint(graphics);
              }            
  
          };
          _backgroundBitmap = Bitmap.getBitmapResource("background.png");
          _fieldManagerTop = new HorizontalFieldManager();
          _fieldManagerMiddle = new VerticalFieldManager();
          _fieldManagerBottom = new HorizontalFieldManager();
  
              add(_horizontalFieldManager);
              add(_fieldManagerTop);
              add(new SeparatorField());
              add(_fieldManagerMiddle);
              add(new SeparatorField());
              add(_fieldManagerBottom);
  

  Basically, I'm trying to combine the thread above with the user interface tutorial.

  http://supportforums.BlackBerry.com/T5/Java-development/user-interface/Ta-p/442781

  The question is when I run the code, I just get the background image, none of the other content is displayed in the foreground. I am this approach correctly?

  I'm not sure the solution you received one will work - it may well do, but the approach is different from what I do.  I based my image of background processing around comments in this article:

  http://supportforums.BlackBerry.com/T5/Java-development/MainScreen-explained/Ta-p/606644

  But if you look at what you said your screen, you will see why you don't see all your real fields.

  The first thing that you add to your screen is as follows:

  HorizontalFieldManager _horizontalFieldManager = HorizontalFieldManager(HorizontalFieldManager.USE_ALL_WIDTH | nouveau HorizontalFieldManager.USE_ALL_HEIGHT) {}

  You said this Manager to use the full height and width.  Then what place is left for any other Manager/field.

  You only add this option to provide abackground.  So actually, to do this, you must you add all your fields and managers in this HFM.  Otherwise that will expose after this one (which, as noted way they have no space to display in). I think you'll see something, if you replace this:

  Add (_horizontalFieldManager);
  Add (_fieldManagerTop);
  Add (new SeparatorField());
  Add (_fieldManagerMiddle);
  Add (new SeparatorField());
  Add (_fieldManagerBottom);

  with

  Add (_horizontalFieldManager);
  _horizontalFieldManager.Add (_fieldManagerTop);
  _horizontalFieldManager.Add (new SeparatorField());
  _horizontalFieldManager.Add (_fieldManagerMiddle);
  _horizontalFieldManager.Add (new SeparatorField());
  _horizontalFieldManager.Add (_fieldManagerBottom);

  But it probably won't be good, so you should follow the advice given in the previous Post or see the KB article.

• Change the colors of the images between monitors while the user interface remains the same

  Hey! Im having a problem where photoshop change colors when I move the window between my monitors, see here: http://sta.sh/04y5s60vf3j is not due to the monitors themselves being different, it does actually change after a few seconds to move inbetween the monitors. The left was callibrated with an elite group of spyder 3 I do not have access to. I applied the file with windows instead of the utility of spyder color management. The second is new, and it is not callibrated by what that is, but instead was done by hand with integrated RGB brightness/contrast/custom settings. Two of them are very close to eachother, so enough for my taste. but when photoshop changes which looks like the image, it is causing problems. Curiously, when I disable calibration of the screen on the left, the image doesn't change color between monitors, but instead always appears as it does on the right. but then they do not match to the top and all the screen looked washed out because it's uncallibrated, so that won't do me any good. Something else interesting to report, is when this image is saved as a. JPG and read with firefox, the image appears exactly as the monitor on the LEFT (which is my primary monitor) despite the monitor left which is the force has changed. does anyone have any suggestions? It also appears that photoviewer windows behaves in the same way, although firefox does not work. Meaning when I open an image in all 3 on the left monitor, they look alike, but when opened on the right monitor, windows photo viewer and photoshop both display the image such as the brighter and redder that firefox works. It's frustrating, because it seems that photoshop changes the image with my measured on my monitor left to match what it looks like on the web, it does. but it does not for the monitor right, or the left is uncallibrated. Another question, I can see with this is even if the user interface is the same shade of gray, the images are different between the monitors because of this change. Does anyone have suggestions?

  -BD

  What you need to understand, is that Photoshop converts the image data, the document profile for the display profile, independently for each display. It is a managed pipeline standard color display. Windows Photo Viewer does the same thing (but do not have a lot of other applications).

  When you move a picture on the screens, it snaps when you drop; as the new display profile is picked up.

  Calibration is only partly about changing the monitor's response. The second part a profile, which is a complete description of the screen in its calibrated State. Then a conversion of standard profile is performed as he goes to the screen. The profile has a much higher level of accuracy than the single calibration.

  ---

  If the image on the web has the stripped document profile, Firefox with default settings does not have this conversion and sends just the unchanged data to display. In other words, it is not color managed. This behavior can be changed, but get your first straight base display profiles. Unless you get a new calibrator it is no that you can do to match these two views.

• How to intercept the sockettimeout exception message and display in the user interface of the view?

  Hi my jdev - 11.1.1.7 version

  I ask a socket connection in my AM and I want to catch the exception of the sockettimeout of t and display the error message in the user interface of the view layer.

  I use customException class that extends DCErrorHandlerImpl, but if we use try catch, then exceptions doesnot reach customclass.

  How to catch exceptions and return to view the layer if we use the operation binding. ?

  Because you call the operation via the link layer, which is perfectly fine, you do not get an exception at all. Exceptions thrown in methods called via the link layer are captured by the framework and transferred to the appellant in the operation binding.

  For that, you get the list of errors after the call returns and add them as messages of faces

  execute the method

  Method.Execute ();

  List errors = method.getErrors ();

  If (! errors.isEmpty ()) {}

  handle errors errors here is a list of exceptions!

  We only get the first

  E receive = errors.get (0);

  FacesMessage msg = new FacesMessage (FacesMessage.SEVERITY_ERROR, e.getMessage (), "");

  FacesContext.getCurrentInstance () .addMessage (null, msg);

  }

  no error return to normal work

  Timo

• Contact list that has brought as local is not displayed in the user interface

  Thanks to the Rest API of Eloqua, the contact list is created with scope as 'local' value but in Eloqua IU record is not displayed.

  Note: What scope is Global, then the folder is created successfully via API and also displayed in the user interface

  Maithili Eloqua creates lists with a range of 'local' when you add individual contacts or upload contacts to a segment.  These lists exist locally as part of the segment and should not appear anywhere else in the user interface.  For a list is available in the shared library, it must have a value of scope of the 'Global '.

• af:showDetailItem always displayed in the user interface text break joint

  Hello

  I created an af:showDetailItem and provided a text like "my name is test", but in the user interface, it is always displayed as "my name is Test. Can you please let me know how can I do the text to display as it is.

  Thank you

  Hi user,

  I use Jdev11.1.1.7, by default, is to show "my name is test.

  Not, as you said.

  So please check if your code anywhere they are substitution at the global level.

  Result:

  My name is test 1

  My name is test 2

  inlineStyle = "" text-transform: capitalize; ">"

  Result:

  I'm Test 1

  I'm Test 2

  inlineStyle = "" text-transform: none; " " >

  Result:

  My name is test 1

  My name is test 2

  Thank you

  Subramanian M

• Display name instead of the ID in the user interface

  Hello
  
  I have the script below to implement. Please see the description below:
  
  __table 1__
  
  ID name
  1 ABC
  2 XYZ
  
  
  Table 2
  
  Tabe1ID col1, col2
  1 Col1value1 col2value1
  2 Col1value2 col2value2
  
  Table1ID column corresponding to the foreign key from table1.
  
  I show data from Table2 in the user interface. while displaying the data in the UI instead of the value of the column Table1ID, I need to display the values of corresponding name column in table1.
  
  that is my view of the user interface should look like below:
  
  Tabe1ID Col1, Col2
  ABC Col1value1 Col2value1
  XYZ Col1value2 Col2value2
  
  could if it you please let me know how I can achieve this in ADF?
  
  Thanks in advance.
  
  Published by: user8673275 on December 12, 2012 06:27

  What version of Jdeveloper? Since you are new to the forums... Please read this before posting so that we can help best-
  https://forums.Oracle.com/forums/Ann.jspa?annID=56

  If you use ADF BC, you can create a VO with a join between the table 1 & table 2 exposing all the fields.
  Then you can drag and drop the original Version as an array of attributes required on the user interface.

  This should focus on what I said - the name instead of id

• The values are not displayed in the user interface

  Hello.
  
  I use jdev 11.1.1.5
  
  I need to refersh tha table
  
  I had created a TPTrialBal EO with corresponding VO. I had dragged and dropped it as an adf:table
  
  I had also created an adf:button named build., when I click on this button, some values are inserted into the TPTrialBal I need to show the value inserted in the user interface.,.
  How can I do this.,.
  
  could someone help me pls

  After update of data in the table add patialTrigger to the table component.
  You can do it by doing this. In the behavior section property table contains call partial property triggers here you
  adjustable from which component partial triggers this component, you can select your command button.

• Impressive transformation slow due to the updating of the user interface

  Hello

  I feel a huge slow down in my test as engine

  I update the display after each test. It consists of a rather

  "simple table" with a subtle change of color and bold

  to indicate the failure or success of the test:

  

  I have also tried several things to determine what routine was

  make the program almost crawling like a snail, here's my

  results:

  No UI refresh: 0m48s (same as Teststand with no updates of the user interface)

  The discount but no page table switch: 1m06s

  Bay of refreshment and switch page: 1m26s

  There are 314 tests, up to 314 redraw and possibly

  switch page 314 to reposition the view. Which gives the

  following user interface refresh costs:

  

  Update of the table: 18 years/314 = 57ms (replacing just a single line, Center to top)

  Switch to page: 20 s/314 = 64ms (bottom right corner)

  Is this really the case? Is there a way to make the refresh of the user interface

  faster? Create two separate loops/threads, one to make

  the test, one for updating the UI asynchronously?

  I understood for an overall picture about different

  widgets, but here I'm 'just' display of channels...

  David Koch

  Well, multi-listbox control is a problem if your change causes access to the muliple property node. For each property node LabVIEW normally does a refresh of the user interface which is very quickly. Fortunately, there is a fairly easy way to fix this.

  Use a node of property for the current VI (just drop a property node and change its class type VI Server-> VI reference) to get the reference of the Panel. Then use another property node connected to your reference of the Panel and select update from the Panel to postpone. Set this value to true before your Listbox (and any other updated user interface) and set the value to false then.

  

• Best way to show the user interface elements

  I'm developing a plugin in which I want the user to be able to put on a mask. I would like to offer regular access to layer masks, but I would also like to be able to define the type of mask 'ellipse' or 'rectangle', similar to the red giant Colorista, for example.

  What then is the best way to make these masks? Should I make it myself and apply them directly on the pixels of the layer? Or is there some sort of overlay UI that I can use? I would like the user to be able to click on the layer and drag the rectangle to scale, for example. What is a nice way to do it?

  in my opinion, the best way (as far as the user experience is concerned) is to use a custom user interface and not to make the mask as part of the image.

  If you return the interface as part of the image, it will be affected by the following effects and displays the channel, will be limited to the size of the layer, and will force a new rendering whenever you want to show/hide the interface.

  In addition, so that the interface is interactive, you must use a custom user interface, otherwise AE will not tell you when and where the user has clicked on the chassis.

  a cutom UI will be a much more elegant solution in regard to these problems.

  Why only regarding these problems?

  because managing a custom user interface is a significant headache.

  on behalf of all those who have developed user interfaces customized for AE plug-ins, welcome to hell...

  see the example of the CCU in the SDK.

  It creates a simple interactive interface in the compose window.

  This would be an excellent starting point for what you are looking for.

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Flatten to a string to send arbitrary objects by messages from the user interface?

  Hi people,

  I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.

  It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.

  Is there something like uuencode/uudecode to avoid this problem?

  Thanks in advance

  Okidoki, found.

  His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.

  As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.

  It was trial and error, and I'm not enjoying this.

• Error variables look a tab after race change the user interface

  Hello

  I have a problem which seems to be a bit like this:

  http://forums.NI.com/T5/NI-TestStand/error-viewing-variables-tab-in-runtime-operator-interface/m-p/1...

  The VI I'm running is a step of edit of a type of step. LabVIEW checks if the property 'Step.Setup.ReadMeasName' exists, fills a listbox with her if she does. An another ListBox with all available measure names will also appear on the user interface. The user has an Add and Remove button to remove the 'ReadMeas' list box measures or add them to it of the listbox 'MeasNames '. Several names may be added/removed according to what is selected when you press the buttons. Once 'Fact' is clicked the VI writes the 'Ref' to the list box "ReadMeas" property to "Step.Setup.ReadMeasName", using a node to set the value of property that is passed the TestStand sequence context. If the property does not exist it creates.

  The only time where I have any problem is when I try to remove items from the property, after it is already initialized (i.e. non-empty). In other words, if I run the VI of teststand, put several names as in "ReadMeas" click on done, again run the VI (already added names appear in the box when the user interface is displayed, LabVIEW reads "Step.Setup.ReadMeasName"), then remove the names. IF "ThisContext.Step.Setup.ReadMeasNames" has opened in the tab 'Variables' step when you try to remove the names, I got this message in the Variables tab: 'one or more errors occurred. Please save your work and restart the application. "If I'm careful of not having expaded 'ThisContext' in the variables tab, but check the property before and after the removal of names in the list it does not work properly, and there is no error.

  This isn't a big problem because I doubt that the end user will check to see that the property has actually filled, but I still want to fix the bug if possible. I installed the patch for TestStand 2010 and the .net Framework 4.0. Someone has an idea of what might be happening here?

  Thank you

  -Josh

  Josh-

  Looks like you are running in a known issue 193751, which is documented in TestStand 2010 and 2010 SP1 known issues list. It is a problem that we intend to fix in a future version of TestStand.

  I hope this helps and I'm sorry for any inconvenience this issue may cause you.

• How can I update the user interface controls in the UI thread

  Hi all

  I want to do a custom image to display this URL source support.

  I start a thread to ask the image of the network data, and then update the display of the image with the data, but I get the error:

  ApplicationPrivate::resourceManager: ERROR called from the thread of user QThread (0x81eeb8c) interface
  ApplicationPrivate::resourceManager: A user interface thread named method

  It's my code segment:

  class URLImageView: public CustomControl, public QThread
  {
  public:
      URLImageView();
  private:
      void run();
  
      ImageView* mImageView;
      Container* mRootContainer;
  };
  
  URLImageView::URLImageView()
  {
      mRootContainer = Container::create().background(Color::Gray).preferredSize(100,100);
      mImageView = ImageView::create().image(QUrl("asset:///button.png"));
  
      mRootContainer->add(mImageView);
      setRoot(mRootContainer);
      start();
  }
  
  void URLImageView::run()
  {
      //get data from network
      //...
      //...
              //create image from binary data        Image* image = new Image(pixelBuffer);
      mImageView->setImage(image);
  }
  

  I know that in the old BB OS (Java Platform), I can get the lock of event request like this UI:

  synchronized (Application.getEventLock())
  {
          // I can update UI control here
  }
  

  Is it same way to Cascades BB10 or what is the right way, if I want to update the user interface in the UI thread?

  Thank you
  

  This looks like what signals are useful for, when it is connected with the option QueuedConnection. I don't have a link for you, but I'm sure that you can get with this description.