display the error when editing on front panel

Similar Questions

• Display the error when the xml document is not valid against the schema

  Hello

  I'm using isChemaValid() in a way that, to determine if the xml document is valid against the xml schema.

  This function returns only 0 or 1, and I want to display the error and the line number if the xml is not valid.

  How can I achieve this?

  Thanks in advance,

  Elad

  Use the XMLType schemaValidate() method. It will throw an exception whose message contains the validation error.

  Get a number of 'line' is not sensible as XML is concerned.

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• When try to install the app in my new laption it displays the error "the product key you entered cannot be used to active windows on this computer".

  Original title: Activation of Windows 7

  Hello

  I have windows 7 Home premium dvd I bought from microsoft. When I tried to install the app in my new laption it displays the error "the product key you entered cannot be used to active windows on this computer".

  Please help me with this.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 8DTXM - 6FQ2H-BKDY9
  The Windows Product Key hash: tyrxnn4SwD4/dXymV2RGA4cQPHY =
  Windows product ID: 00359-OEM-9801782-52192
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {1BCBE11C-A21C-46C6-99B2-41DA76B3FEFE} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {1BCBE11C-A21C-46C6-99B2-41DA76B3FEFE}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-BKDY900359-OEM-9801782-521928S-1-5-21-1079193163-3130481270-3640039680Dell Inc.. Vostro 3558 Dell Inc.. A01 20150209000000.000000 + 000E9BB3607018400FC04090409India Standard Time(GMT+05:30)03109

  Content Spsys.log: 0 x 80070002

  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  The following files are available for download from the Microsoft Download Center:

  For a 32-bit version of the Windows Installer update for Windows 7 for x 86 based systems (KB971033)

  http://go.Microsoft.com/fwlink/?LinkId=150841

  or if you have a 64-bit version of Windows

  Install update for Windows 7 for x 64-based systems (KB971033)

  http://go.Microsoft.com/fwlink/?LinkId=152411

  Source: http://support.microsoft.com/kb/971033

  Please, run again in normal mode and copy Microsoft Genuine Advantage diagnostic tool and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

• "Cannot display Page" error when you click the Remote Agent

  Hello world! ACS SE 4.0, we have installed and we have added a remote agent running on Windows Server 2003. Recently, we encounter "Cannot display the page" error when we click on the RA under a group of network devices. It's resolved by restarting the device SE ACS and access the web console for ACS still once, but after a few hours, the problem reoccur. By clicking on the links on the web console for ACS is OK at first, but after clicking on the RA, each link displays the error "Unable to display the page." Hope you could help me with this problem. Any person support is much appreciated.

  Thank you!

  Hi Jas,

  Here is the bug CSCsg40444.

  Kind regards

  ~ JG

  Note the useful messages

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg

• Display hex values when editing a digital control

  Hexadecimal display is deleted when editing a digital control (in the settings) in cvi 2012. Is this a bug or am I missing something?

  I have informed our R & D Department of the format settings in 2012 of the CVI. I have filed a request for Corrective Action (CAR # 379345) on this issue, but cannot guarantee that when this problem will be solved. You can check if this problem has been resolved in future versions of the CVI by searching the CAR identification number listed previously in the correction of a CVI Bug information.

• Unable to display the error message using the controller extension

  Hello

  I am trying to extend standard iproc CheckoutDistsCO. I have to display the error message when the quantity entered is '0 '. So I wrote logical when you click on the apply"" button. I created an extension CheckoutDistsCOEx & written logic here... but I am able to see messages in the log file, but no error message on screen.

  After having many forums I place super.processFormRequest (pageContext, webBean); at the end. It start always error message.

  Standard CheckoutDistsCO has a logic in the button apply. I think it is the substitution of the extension code... How can I fix? Pointers appreciated please

  package xxtr.oracle.apps.icx.por.req.webui;

  Import oracle.apps.fnd.framework.OAApplicationModule;

  Import oracle.apps.fnd.framework.OAException;

  Import oracle.apps.fnd.framework.OAFwkConstants;

  Import oracle.apps.fnd.framework.OARow;

  Import oracle.apps.fnd.framework.OAViewObject;

  Import oracle.apps.fnd.framework.webui.OAPageContext;

  Import oracle.apps.fnd.framework.webui.beans.OAWebBean;

  Import oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean;

  Import oracle.apps.icx.por.req.webui.CheckoutDistsCO;

  Import oracle.jbo.domain.Number;

  java.lang.String import;

  public class CheckoutDistsCOEx

  extends from {CheckoutDistsCO}

  {} public processRequest Sub (pageContext OAPageContext, OAWebBean webBean)

  super.processRequest (pageContext, webBean);

  }

  {public processFormRequest (pageContext OAPageContext, OAWebBean webBean) Sub

  super.processFormRequest (pageContext, webBean);

  OAApplicationModule am = pageContext.getApplicationModule (webBean);

  pageContext.writeDiagnostics (this, 'seized in PFR method", OAFwkConstants.STATEMENT);

  If (pageContext.getParameter ("Return")! = null) {}

  String applyevent = pageContext.getParameter (EVENT_PARAM);

  If (applyevent.equalsIgnoreCase ("return")) {}

  pageContext.writeDiagnostics (this, "clicked the Apply-back button" + applyevent, OAFwkConstants.STATEMENT ");

  OAException message = new OAException ("clicked on Apply-back put the message in the dialog box" + applyevent, OAException.INFORMATION);

  pageContext.putDialogMessage (message);

  OAViewObject poreqdistvo = (OAViewObject) am.findViewObject ("PoReqDistributionsVO");

  pageContext.writeDiagnostics (this, "display object = >" + poreqdistvo, OAFwkConstants.STATEMENT);

  OAAdvancedTableBean xxProjectDistsAdvTable = (OAAdvancedTableBean) webBean.findChildRecursive("ProjectDistsAdvTable");

  Line OARow = (OARow) poreqdistvo.getCurrentRow ();

  If (line! = null) {}

  pageContext.writeDiagnostics (this, "line Found"+ row, OAFwkConstants.STATEMENT);

  Number of xxtrqty = (Number) row.getAttribute ("ReqLineQuantity");

  pageContext.writeDiagnostics (Thi, "get attribute reqlinequantity" + xxtrqty, OAFwkConstants.STATEMENT);

  If (xxtrqty.intValue () == 0) {}

  pageContext.writeDiagnostics (this, "in comparing to 0 xxtrqty" + xxtrqty.intValue (), OAFwkConstants.STATEMENT);

  throw new OAException ("Enter valid amount", OAException.ERROR);

  }

  }

  else {}

  throw new OAException ("no line Found Else", OAException.ERROR);

  }

  }

  else {}

  throw new OAException ("not in"apply button", OAException.ERROR);

  }

  super.processFormRequest (pageContext, webBean);

  }

  }

  Thank you

  TR

  For example, when you comment on the super. PFR, you receive the error message on the right of the screen?

  Can you try this code and paste the debug log.

  public class CheckoutDistsCOEx extends CheckoutDistsCO {
      public void processRequest(OAPageContext pageContext, OAWebBean webBean) {
          super.processRequest(pageContext, webBean);
      }
  
     public void processFormRequest(OAPageContext pageContext, OAWebBean webBean) {
    //super.processFormRequest(pageContext, webBean);
          OAApplicationModule am = pageContext.getApplicationModule(webBean);
          pageContext.writeDiagnostics(this, " ----> Entered into PFR Method", OAFwkConstants.STATEMENT);
          String applyevent = pageContext.getParameter(EVENT_PARAM);
    pageContext.writeDiagnostics(this, " ----> applyevent: " + applyevent, OAFwkConstants.STATEMENT);
          if (applyevent.equalsIgnoreCase("return")){
    pageContext.writeDiagnostics(this, " ----> Inside If", OAFwkConstants.STATEMENT);
              OAViewObject poreqdistvo = (OAViewObject)am.findViewObject("PoReqDistributionsVO");
              OARow row = (OARow)poreqdistvo.getCurrentRow();
    pageContext.writeDiagnostics(this, " ----> row : "+ row, OAFwkConstants.STATEMENT);
              if (row != null) {
    Number xxgesqty = (Number)row.getAttribute("ReqLineQuantity");
    pageContext.writeDiagnostics(this, " ----> xxgesqty : "+ xxgesqty, OAFwkConstants.STATEMENT);
                  if (xxgesqty.intValue() == 0) {
    pageContext.writeDiagnostics(this, " ----> throwing errro : ", OAFwkConstants.STATEMENT);
    throw new OAException("Enter Valid Quantity ",OAException.ERROR);
    }
    }
              else {
    pageContext.writeDiagnostics(this, " ----> No Row Error", OAFwkConstants.STATEMENT);
    throw new OAException("No Row Found Else ",OAException.ERROR);
    }
    }
    pageContext.writeDiagnostics(this, " ----> Calling Super", OAFwkConstants.STATEMENT);
          super.processFormRequest(pageContext, webBean);
      }
  }
  

  See you soon

  AJ

• Hello, I have problems with the digital signature on the software. It displays the error message: 2148073510. Could someone help me?

  Hello, I have problems with the digital signature on the software. It displays the error message: 2148073510. Could someone help me?

  Hello

  I would ask you go through the next thread once and see if that fixes the problem.

  Error 2148073513 when you try to digitally sign Acrobat 11 standard

  Concerning

  Sukrit diallo

• Need to install KB947821 update but fails and displays the error 9370001 code

  You will need to install KB947821 update but fails and displays the error code 9370001.  Does anyone have a solution?

  CrystalBall © SEZ...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to display the ToolTip when the input text is disable

  How to display the ToolTip when the input text is disable?

  Just checked in FF and IE11, works fine for me (jdev 12.1.3)

  Dario

• Get the error when using the UTL_SMTP function in Oracle 11 g

  Hello

  I get the error when executing a trigger e-mail code in oracle 11 g:

  I have following trigger on the temporary table:

  CREATE OR REPLACE TRIGGER temp_temp_message AFTER

  INSERT OR UPDATE ON temp_message FOR EACH LINE

  declare

  Conn UTL_SMTP . CONNECTION ;

  msg VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Insert in temp_message values ()1

  );

  When I insert the record in the table there are given the following error.

  ORA-20000: failed to send messages because of the following error: ORA-24247: access denied by access control (ACL) of network list

  ORA-06512: at the 'APPS '. TEMP_TEMP_MESSAGE', line 14

  ORA-04088: error during execution of trigger ' APPS. TEMP_TEMP_MESSAGE'

  But if I run the next plsql through sqlplus send mail successfully:

  declare

  Conn UTL_SMTP . CONNECTION ;

  MSG VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Thanks in advance.

  Yoann

  To resolve ORA-24247 you must:

  (1) create an acl (if it is not already created)

  (2) add the user privileges using the resources of the network

  (3) to use the ACL to a specific address

  This might be useful

  How to fix an ORA-24247: access denied by access control (ACL) of network list | DB tips

• I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  No one can tell you anything without the info adequate system or other technical details, including the exact error message.

  Mylenium

• I have a problem with the key, I aktivate Photoshop CS 6 after buying fo little years. But the drive hard ist crasht a moment the aktivate display the error. Please you can reset the key?

  I have a problem with
  the key, I have aktivate Photoshop CS 6 after buying fo little years. But the
  Drive hard ist crasht a moment the aktivate display the error. Please you can reset the
  key?

  Hi berndp3095653,

  Greetings.

  You must contact the customer as some changes to do on the backend

  Contact the customer service

  Concerning

  Rohit

• Get the error when update: Office creative cloud could not be updated. (error code: 2)

  Get the error when update: Office creative cloud could not be updated. (error code: 2).

  I'm on a McBook Pro, OSX 10.9.5 retina.

  How to fix error Code: 2?

  Always the same?

  Follow the procedure below:

  Please follow the steps below:

  1)

  Click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  2)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up selected."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  3) click on the link below and download file Creative Cloud install and use the same to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud