Display the icon "2 MIN" when starting the computer

Similar Questions

• When starting my computer will not have right to windows is said by pressing F1 or F2, he also says to look for floppy drive 0 failure

  When starting my computer will not have right to windows is said by pressing F1 or F2, he also says to look for floppy drive 0 failure

  It is a message from the BIOS. You can press F2 and go into BIOS and select "set as default" then save and exit. The PC actually has a floppy drive?

• Error when starting my computer code: there is no disc in the drive. Please insert the floppy disk in drive\Device\Harddisk3\DR3

  I just started getting this error in the last month.  It only happens when I start my computer.  I started to use Windows Live Mail Beta.  Would this have something to do with it?

  The problem was with Windows Live Sync.  Once I have not won, I didn't the message again.

  I'm fairly certain that this has nothing to do with Windows Live Mail beta - but it does not sound like a startup program any want a disc in the drive and that is what causes the problem.

  To boot from the hard drive, first of all, in the boot sequence, you may need to change the BIOS to hard drive first in the boot sequence (it is not always necessary and I have my system set to start first on the CD player and have no problem - but you have problems so we'll see if that fixes the).  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  While there, make sure that there is no setting to boot the disk hard regardless of the boot sequence.  Reset.  Normally, it should start without the error message.

  If this does not work, what is the EXACT (including all codes verbatim) error message?  It refers to a specific file, and if yes, what is the file name?  Are you able to start despite the message or that you need to insert the CD in the drive and then it allows you to start?

  Try to boot into safe mode without any CD in the drive (repeatedly clicking the F8 key during the boot process until the menu appears) and see if it works or if you have the same problem.  If you can start in safe mode, it's a good sign.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  If this does not work, go to start / search area and type msconfig.exe and enter, and double-click on the program icon that appears.  Go to the Startup tab and remove all checks, click OK, close the program and reboot and see if the problem persists.  If this isn't the case, then the problem is caused by something trying to boot at startup, and you may need to add the items back one by one, restarting after each one, until you find the culprit at the origin of the problem.  Then let this disabled element, double-check all the others that you actually want from startup, click OK, close the program and restart.  The problem should be solved.  If it's not working, then go back and re-check items that have been checked, click OK, and save the program and restart.  You'll be back to where you started, but we will have eliminated a very likely cause.

  That's all for now.  I hope this helps.  If the problem persists, I need more information about this message and all the files that he mentions.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Is someone can you please tell me how I would get my Windows Vista calendar opens automatically when starting my computer to the top? Thank you!

  Is someone can you please tell me how I can get my windows vista calendar opens automatically when starting my cpu to the top? Thank you

  Put a shortcut to the calendar program in your startup folder:

  1. Click the Start button.
  2. Click Open .
  3. Double-click programs .
  4. Double-click Startup .
  5. Click the Start button.
  6. Click on all programs .
  7. Right-click Windows Calendar , hold down the button, drag it in theStart window and let go.
  8. Click copy here .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• When starting my computer there is delay at startup once the bios key not the OS boot process

  Original title: when my computer starts is it lag start-up after the hands of the bios outside the process of Lout to the bone. This shift lasts about 30 to 40 seconds and occurs when starting untouched.

  Start lagin windowd 7 Professional 32-bit

  Hello

  Make sure you have the Superfetch service running and then try to speed up the startup using my guide [1]. This causes the prefetcher in Windows 7. This increase startup performance a lot. All other tweaking tools are useless. Use this method only with this Toolkit from Microsoft.
  
  If it is not to speed up the startup process, follow my guide [2] to do a followed by start-up and compress the boot_BASE + CSWITCH + DRIVERS + POWER_1.etl RAR or 7z and transfer it to your Skydrive [3] and post the link here.

  I take a look at the trace, maybe I see what's wrong with your Windows.

  André

  [1] http://www.msfn.org/board/index.php?showtopic=140262
  [2] http://www.msfn.org/board/index.php?showtopic=140247
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [3] "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• When starting my computer, printers show as not specified, but is recognized to restart; cannot start the print spooler.

  When I start my computer (Windows 7), all my printers are inaccessible and labeled as "not specified"; When I reboot, they are all functional again.  Before restarting, I get an error message that the print spooler does not work.  When I try to start the print spooler, I 'Windows could nto start the spooler on Local computer service.  Error 1053: the service did not demand launch or timely control. »

  If you start/restart your PC twice before having all the features something interferes with the boot process.

  The problem occurs if you start own http://support.microsoft.com/kb/331796 NB this is the manual method not the FixIt

  And if the problem is still there on a place clean boot, and then if you start in safe mode what then?

• When starting my computer, it restarts constantly

  Original title: START PROBLEM

  during the priming permanently back on for 5 or 6 times.  Then start correctly. Works properly in safe mode

  Hi SKYEN,.

  ·        You receive an error message or error code after you start on the desktop?

  1. follow the steps below to disable the auto restart to the failure of the system and check if you receive an error message:

  a. click on start

  b. right-click on computer

  c. click Properties

  d. in the System Properties window

  e. click Advanced system settings

  f. click on the Advanced tab

  g. uncheck: automatically restart

  h. when the problem occurs, you will receive message or error post back with the same error code.

  2. also try to start the computer in clean boot in safe mode, restart the computer and check the results.

  Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  If you are able to work with the mouse, then you can continue with step 2 from the link above.

  Make sure that you reset the computer in normal mode in step 7.

  Go back with the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When starting my computer Windows 7, error ststring.dll is missing

  I get an error message that ststring.dll is missing when I start my computer running windows 7 Home premium. He suggests that I have reinstall. What is ststring.dll and how I would like to reinstall it?

  Hi I found this post a while back on another site, I did what it said to do exactly and it worked for me, don't waste your time call Dell they want only to load on a 100.00 to fix and there is no guarantee. Just try to do what that told the post that I inserted below or if you can't find a friend who is more computer savy and have do them. I hope this helps.

  Solved: "STService.exe Unable to locate component."

  Hey

  First of all, my apologies if there is a section of this forum that this thread would be better suited to the. Mods, feel free to move the thread elsewhere if that is the case.

  Anyway, I just thought I'd post a little fix for a problem that I had with my Dell laptop. After a registry cleanup, I started to receive the error message every time after that I logged: "unable to locate component STService.exe. This application has failed to start because STlog.dll is not found. Reinstalling the application may fix this problem. »

  I googled the problem but could not find a suitable solution - all other users have this problem had simply uninstall Dell DataSafe Local Backup (where the problem is) or just simply to stop it running at startup to the top to get rid of the error messages.

  However, if, like me, this isn't something in particular, you want to, here's a quick solution:

  Find "Dell DataSafe Local Backup" within your program files (for me, it was in: "C:\Program Files (x 86) \Dell DataSafe Local Backup")

  Find the STLog.dll file in this directory

  Copy the file - and I hasten to repeat, copy it (do not move or cut the file, because it would be a lot more questions)

  Find the folder Scheduler (for me, it was in: "C:\Program Files (x 86) \Dell Backup\Components\scheduler DataSafe Local ')

  Paste the file into this directory

  At this point, I want to emphasize that STLog.dll is not - or at least was not for me - the only one missing. I also had to copy all the following dll files in the same way:

  CSTError.dll
  STString.dll
  STXml.dll
  STStringArray.dll
  LibXml2.dll
  ZLIB1.dll
  STFiles.dll
  STRegistry.dll
  STPE.dll
  STNLS.dll
  STSystems.dll

• Recently, I uninstalled Adobe Creative Cloud yet the program still appears when starting my computer!

  Its frustrating because I deleted and can no longer find it in my programs list, or anywhere else. I don't know what to do so that he can go far permenantly! can I redownload it and then uninstall it again?  Please help ASAP!

  See if running the CS cleanup tool helps to...

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

• How to set group policy to display the computer name or the IP address for "send to."

  original title: I need a group political templete windows 2003 get the ip address or computer name when you use the "send to" in a shared folder on a server

  I need a group policy windows 2003 templete to get the name of computer or ip address when you use the "send to" in a shared folder on a server

  Hello
   
  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.
   
  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

  I hope this helps!

• Unable to display the computer properties

  I try to open the properties of the workstation, but I'm inclined to a tab of the Control Panel, I use an Alienware so that has nothing to do with this?

  It's normal, Windows Vista and later versions use the page of the system instead of the old "workstation properties" Control Panel front.

  If you want the old properties, click on the link on the left that says "change system settings.

• How to fix this when starting my computer is configured for Firefox/Google calendar of starting but now opens a duplicate site that I must close.

  My computer is set on boot-up the top, my Google calendar is open in my Fire Fox browser. However, after a recent update of Windows 7, it opens now duplicate Google calendars. (The URL is identical except for the case in some regions) Then I have to close the calendar in double before working on the default calendar. How can I eliminate duplicates.

  How do you start Firefox?
  You open a link in default browser (internet shortcut) or you open Firefox directly?

  Try to reset the default browser and temporarily set another browser as your default browser.

  You can use the MSConfig program or the Autoruns utility to see what software is getting started.

  • http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

• I get a pop gray box that has the title of legend. Also get a box when starting with the title: c:\ C:\Progra~1\muclie~1\muclie~1

  Original title: Malware or virus? How can I remove?

  I have a virus. I get a gray pop box in the center of my screen with the title of legend, with an OK box in the middle. When starting my computer, I also get a box with the title c:\ C:\Progra~1\muclie~1\muclie~1

  I tried to remove malrare, malware removal, spyware removal, nothing worked. Anyone have any ideas?

  Please answer each of the following [admittedly tedious] diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application ALREADY installed on the computer?

  3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. open Add/Remove Programs and make sure that Show updates at the top is checked (and leave it checked); then select the name in the box sort by on the right. Now do scroll down & tell me if ALL the other updates following up-to-date are listed?

  (a) KB2676562, KB2659262, KB2686509, KB2695,962 , & KB2718704;

  (b) KB2675157, KB2653956 & KB2621440;

  (c) KB2661637, KB2598479, KB2631813 & KB2585542;

  (d) KB2633171, KB2393802 and especially KB971029

  Most will appear as Windows XP security update , followed by the number in brackets.

  If IE8 is installed, two 2 will appear as a security for Windows Internet Explorer 8 update , followed by the number in brackets.

  5. is Firefox, Chrome or any other alternative browser installed?

  6. what version of Java is installed?  TEST HERE in USING IE (only!)-online http://java.com/en/download/installed.jsp

  7. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; Advanced System Optimizer. TuneUp Utilities; WinMaximizer; WinSweeper; CCleaner)?

  8 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

• I get a screen when you start the computer.

  Hello

  How are you?

  Recently, my system hung up and had to do a force restart. I get a screen when starting my computer with few options. I have to click ESC several times to get rid of the screen. This was not an option before. When I start my computer it used to start normally. How to get rid of the screen? Please advice.

  Photo I took of my mobile is attached.

  Windows 7

  AMD athlon

  Auto system

  Thank you

  Gershom

  Hi all

  Thank you for the support.

  I solved the problem by unplugging the cable from the hard drive inside the CPU and connected again. All is well now.

  If the system is not the start or make obstruction to the start-up stage, you can try the same thing.

  All the best.

  Thanks again John and Gerry.

  Surya Kumar

• How to display the time on the computer in labview?

  Hello

  I have displayed the computer time in labview... "' show the attachment.

  but I want to display the time in the best view... as the last accessory

  have you any suggestions?

  The output of Get time in seconds is already in the timestamp data type.

  Lynn