Display the line number in TextEdit

Similar Questions

• How to display the line number in the form?

  Hi guys,.
  First I fll you in the story so far...
  
  I have a block of data in database named: V_PAYUPLOADHEADER_HP, in the property palette I put in order by facility and warehouse.
  
  I want to display the line number for each record of recoveries, so I do: V_PAYUPLOADHEADER_HP. NUMB, which will contain the line number.
  
  
  Here are some methods I've already tried:
  -First I tried to make a database of field element = O, column name = ROWNUM.
  The result is the jump of integer (1, 2, 5, 3, 4 etc. instead of 1, 2, 3, 4, 5) I think it is because of the agenda that I set.
  I have to keep this order by setting, so I look for another way to display the rownum.
  
  -Then I tried to set the data item = N, column name = null, mode of calculation = formula, formula =: system.trigger_record.
  When I run the value of: V_PAYUPLOADHEADER_HP. NUMB is 1. For all recovered records is 1, 1, 1, 1 instead of 1, 2, 3, 4.
  
  -J' also tried to use the trigger after QUERY attached to the block.
  In relaxation, I have this code:
  : V_PAYUPLOADHEADER_HP. NUMB: =: system.cursor_record;
  When I run the value of: V_PAYUPLOADHEADER_HP. NUMB is 1. For all recovered records is 1, 1, 1, 1 instead of 1, 2, 3, 4...
  
  
  
  Is there something I missed?
  What can I do to display the rownum?

  Hello
  Maintain this point NON-base of DATA and create a trigger on the block called after REQUEST level and use the code below...

  :FIELD_NAME:=:SYSTEM.TRIGGER_RECORD;
  

  -Clément

• Error handling: to display the line number tht erored out with error message

  Hello
  
  I'm trying to update several lines at once and for some lines are error-ed out due to the failure of the validation. It's giving the correct error message does not display do not line number what error-ed out.
  I tried with OARowValException, such as specified in the guide of the OA-developer to add the line number in the error message:
  
  After using this it is show the number of line 1, which either the line it wrong:
  
  Error in line 1 - the Start Date cannot be later than the Ending Date.
  Error in line 1 - the Start Date cannot be later than the Ending Date.
  
  In fact I've updated the line-2, 3 but it gives as 1st row.
  
  Here's the code to add the line numbers for the error message, I added.
  ========================
  try {}
  throw new OARowValException (viewObject.getName)
  voRowObject.getKey ().
  "PA".
  Error_Message);
  }
  catch (System.Exception e)
  {
  exList.add (e);
  }
  
  If (exList.size () > 0) {}
  OARowValException.raiseBundledOAException (exList);
  }
  ==========================
  
  Code the developer guide OA that I follow:
  
  throw (OARowValException) new
  getViewObject () .getFullName (), / / View full name use object
  getKey(), / / primary key line
  "DAMIEN", / / message name abbreviated enforcement
  "ATTR_EXCEPTION"); name of the message
  end
  
  
  Any suggestion/solution will be a great help.
  
  -Shasha.
  
  Edited by: 826073 January 6, 2011 06:58

  Thanks a ton of out. Your update has helped me solve the problem. The original Version I was using had no attributes defined as "Key attribute". Once I put one of the key attribute primary as "attribute Key' on my VO Editor, all worked great :). Thanks again.

• See the line number error container

  Hello
  
  I am new to Oracle SQL Developer, I use the version 3.0.0.4 on Windows XP 32 Bit, connected to an Oracle 11 g server.
  
  I have a statement of "CREATE or REPLACE VIEW FORCE" that shows me an error ("error at line 0 in command: CREATE or REPLACE...") ") when I run it directly in SQL Developer. Unfortunately the error message does not indicate in what line the error occurs (I have activated the display of line numbers).
  
  Can Developer SQL show me the line number that contains the error?
  
  Thank you!

  Developer SQL can display the line number, but for some instructions a number of line is not available. CREATE VIEW is one of them.

  Try taking the select statement of create view and it works separately. That should give better diagnoses.

• display the Total number of lines in the first page of the report

  Hi, in obiee, paging will be 1-25. Is there any possibility in obiee to display the total number of lines next to paging. Ex: If the result contains the 120 lines. It should show after paging
  
  Documents 1-25. Total records: 120

  User,

  If this is the very simple case go in narrative display

  In the Narrative section give

  No.Of.Records: @4

  in my case is 4th column: No.Of.Records where fx = max (rcount (1))

  GoTo Compound display click the button Add and align narrative view down to see table

  Thank you
  Saichand.v

• How to make a table of contents to display the chapter number and chapter text together

  I'm working on 11 of FrameMaker. How can I get my Table of contents (TOC) to display the chapter number and chapter title on one line. My chapter titles have the chapter number and chapter title on two lines, two centered at the top of a new page. I wish that my OCD to pick the chapter number and chapter name on one line not two. Thank you.

  If you'v created the table of contents with activation of hyperlinks (default) setting, and then simply hold the CTRL + alt keys and click on empty entries in your TOC file. FM will open the file containing the entrry and jump to the correct section.

• Disable the button new add tab CSS specifications of the trade while displaying the Notification number GTIN message duplicate

  Hi Ron,

  I need to disable the Add button again in the CSS tab on specification of the trade while displaying the Notification number GTIN message duplicate.

  If it does not duplicate notification displayed GTIN message not necessary to disable the Add button again in the CSS tab. Please see the screen shot for more information.

  You said same thing as below mentioned in bold.

  2. you can lock whole sectors, such as the CSS section, you use an extension called SectionLevelEditing. You can read about it in the Guide of extensibility, which will guide you to a more detailed document.

  If you are wanting to keep lock editable, but section towards the bottom/remove the button Add a new one just so you can use the UIe feature Extensions, also documented in the extensibility Guide.

  As suggested, I had crossed the SectionLevelEditing document. but I don't get anything in the document.

  Even my requirement is condition based on the button Add a new on the CSS tab.

  I tried another way

  (1) I got to add new button id with developer tools (ctl01_CtlInitialPublication1_ctlCollapsibleContentContainer_ctl00_btnAddNew)

  (2) what properties should be used by pulling the new id button.

  I am faced with the question. Please let me know some suggestions.

  Thank you

  Floquet

  In the JavaScript code, could you try to filter by some special keywords in your notification of duplicate instead of code GTIN number # .writing C NET.

  In user interface Extensions, it has only allowed to extend the JavaScript code.

• ﷯Error - error message: an element on the page "News" at location 33 642 requires the pixelation, but is too large to rasterize. Resize it smaller and try again... I can't fix this or find that the line number.  How can I find this line?

  ﷯Error - error message: an element on the page "News" at location 33 642 requires the pixelation, but is too large to rasterize. Resize it smaller and try again... I can't fix this or find that the line number.  How can I find this line?

  I don't know why it worked, but I changed the police and was able to download Web site.  Thanks for your help!

• Display the page number and the total number of pages in a single domain. Is this possible?

  I would like to than my report to view the number of page in the format "< page number > of < total page >", as "2 of the 6". Rather than create 2 fields to display the page number and the total number of pages and 1 label to display the word 'from' in the Middle, can I combine all of this into one? If so, how?
  
  Note: I woud wants to use "physical page number" as "total physical pages" and page number as the total number of pages.
  
  Published by: 1008305 on June 6, 2013 19:31

  Hello

  It is not possible to write in a.

  Even I try for the same, but didn't find any solution.

  We ave only two options to display the page number;

  1.) reports under construction Page number option: string will be: page & to &

  2.), we can take 2 text field that displays the page number and the total number of pages with 'from' lable inside the two text fields.

  IF any new you will come to know then.

  Thank you

  SHAH HARD

• PLSQL question about printing the line number when an exception occurs

  Hi all
  
  My database: oracle 10G
  
  Here's my question:
  
  Explain my problem using a simple procedure, such as:
  
  create or replace procedure p_hello_world
  as
  [a few variables declared]
  Start
  [a lot of code here]
  exception
  while others
  dbms_output.put_line ('Exception occurred for the p_hello_world procedure');
  dbms_output.put_line ('sqlerrm' |) SQLERRM);
  dbms_output.put_line ('sqlcode' |) SQLCODE);
  -Suppose I want to print the line number where the exception occurred, pourrais I do, if so please help me with this
  end;
  
  Now it's the same construction that I use for my use, I have a comment in the above exception block where I need to print the line number where the exception is produced, now since I'm on so that any other article, my procedure is always succeed even if an exception occurs, but using this technique I am not able to quickly debug my code but print line number would help me a lot Please help me with this as its rescue me great distress.
  
  Concerning
  Rahul

  Try something like:

  dbms_output.put_line(sqlerrm || chr(10) || dbms_utility.format_error_backtrace);
  

  (Hoping that this is a simplified example and you are not actually using dbms_output as an exception handler...)

• Click on search for result code doesn't display the line containing the search results

  I use the latest version of DreamweaverCC2014 on the latest version of Mac Mavericks. I use Dreamweavers find and replace to find code in an open html document. In the search results Panel results aren't clicking on me at the relevent code line in the document. It used to work well in the previous version of DW, I was using.

  In the DW help note it is said: ' display the results of a particular search in context: select window > results to display the search panel. " Double-click on a line in the search panel. If you are looking for the current file, the Document window displays the line containing that search result. ' http://helpx.adobe.com/Dreamweaver/using/Text.html#search_for_and_replace_text

  Double-click does not display the line containing the result of the search for me. It seems to work OK in my CSS files, but not in HTML longer (1010 lines).

  Any advice? Someone at - it the same problem? Thank you

  I have the same problem with all the HTML files that have external style sheets. for example .

  So it seems to be a bug around that. When you delete the above, double click functionality works.

• How to display the total number of rows in the dashboard

  Hello
  
  I have a dashboard report for retrieving the list of projects and details, it grows on a daily basis, instead of users downloading the report and find out the total number of projects, I want to display 'the total number of projects' alone in the dashboard. How can I do?
  
  Also is it possible to do like a pop up or something a little flash news - not necessary, but will be very good if I can do it.
  
  Thanks for your time and your help.

  create a report and a column to write a column invert the function max (rcount (1)). Call this column depending on the position of the column (as @1) in narrative mode.
  You can view only the narrative in the dashboard.

  for flash type of report, you can use the ticker view and call the same column in the view.

  refer to this link to view the total number of records
  http://Siebel.ITtoolbox.com/groups/technical-functional/Siebel-Analytics-l/display-row-count-in-top-of-the-table-view-3704999

  assign points if found useful.

• How to automatically add the line number in the query

  Hello
  
  Can anyone please glimpses me the path to achieve this?
  
  I want to write a query that will search the record based on the line number in the result set.
  Let's say I have 500 rows in the employee table, but I want to put a condition on request where will see record only between 100 to 200 line number in the result set.
  
  
  
  Thank you
  Madam.

  It is wrong to say that look for the lines between ROWNUM 100 to 200 unless you define a column of lines must be ordered.

  Oracle does not guarantee that the lines will be be returned in the same order if you run the query several times without defining the ORDER BY clause.

  So first decide on what columns you want to order the files and then use the rownum to assign the line number and then get the records you want.

  something like that

  SQL>SELECT *
    2    FROM ( SELECT e.*
    3                 ,ROW_NUMBER() OVER (ORDER BY sal)  row_num
    4             FROM emp  e
    5         )
    6   WHERE row_num BETWEEN 5 AND 10;
  
       EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO    ROW_NUM
  ---------- ---------- --------- ---------- --------- ---------- ---------- ---------- ----------
        7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30          5
        7934 MILLER     CLERK           7782 23-JAN-82       1300                    10          6
        7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30          7
        7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300         30          8
        7782 CLARK      MANAGER         7839 09-JUN-81       2450                    10          9
        7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30         10
  
  6 rows selected.
  
  SQL>
  

  Concerning
  Arun

• Contacts display the phone number does not work

  I would like to display the home workplace phone number in the contacts view. Most of my contacts have only a house number or mobile. How can I do this?

  There is a small square button at the top right of your address book component, which, as the identical buttons in Thunderbird allows you to choose the columns that are displayed.

• notification of iMessage on Mac displaying the phone number, not name

  Only, I imported my contacts from my phone to my Macbook Air, but whenever I get a notification of text at the top right of my screen, it shows the phone number, not the name of the contact. Once I go into iMessage, the name is displayed. That's all just annoying that I don't know who texted me until I actually open iMessage. iCloud is enabled for my Mac and my iPhone.

  Check system preferences > Notifications > view Message