Display turns into a very bright light after playing game on Satellite P300D

Similar Questions

• After playing games online, I closed the window and sees a piece of the game into my office window. It looks like a virus. What should I do?

  After playing games online, I closed the safari window but I can barely see the walkthrough of word written in my office. I changed my desktop to a solid color, so I can see it better. I also see the Netflix pause button and if I reduce the window as I type right now I see Select a community to Post To my office. Is this a virus? If yes what should I do to fix it?

  Thank you!

  Are you referring to the "ghost image" or "ghosting"?

  Avoiding persistence on Apple displays - Apple Support

• My photoshop has turned into a day 30 trial after upgrading my account to a package with lightroom included! What is going on?

  I have been subscribed to a single package Photoshop CC from 2013, and one of my friends said that I was paying too much, and I should at least have included Lightroom. So, I checked, asked a few questions to the (probably a bot) chat service, before I knew he was there, my possibility to opt for a package with photoshop and Lightroom (including bridge)
  It was time to update my existing bridge and photoshop. After doing this, all of a sudden my photoshop has changed in a 30-day trial! How can I fix it?

  FIXED! Re, I entered the cat, with the hope to fix with someone, and it is fixed!

• Satellite L300/L300D starts to get very hot when I play games

  Hello I have a laptop Toshiba Satellite L300/L300D
  Bicoeur Turion Rm-74
  2048 MB of ram 800 mhz / + 2048 MB
  250 GB HDD 5400 RPM Sata
  15Wxga trubrite tft screen
  DVD super multi drive 2 layer
  w-lan 802. 11 b / g
  webcam bought Spain, Lanzarote and has one year and I has not had any problems until now, but in the last 2 months I have had this problem
  the computer starts fine in the heat when I play a game and after it stops completely, and I need to let it cool a little before you can start again.
  What do you think is the problem?

  It is not easy to say with certainty what the problem is, but for you, it's portable clean.
  Maybe there's a lot of dust inside and dirt block cooling rack.

  When the laptop cannot be cooled correctly the material temperature reached the critical level very quickly and portable will switch down without any warning or message.

• Goes into somekind of sleepmode when I play games

  Greetings,

  I have a problem with my HP Pavilion dv6-7006ed Entertainment Notebook, when I play a game or watch videos, sometimes as he could obtain in a sleepmode, the screen not turn not instant black like you see when it happens in mode 'sleep'. After I have can't do anything, but the laptop is just running.

  Does anyone have an idea how to solve this problem?

  Kind regards

  Elx

  Hi Elx,

  It is a power management issue going on here. I enclose a document that explains some of the advance power settings. When you get off the document you see a link to called Page 2: sleep and hibernation settings and that will show you how to disable the "sleep mode".

  http://blog.LapTopMag.com/Windows-Advanced-Power-Options-explained

  Thank you

• Satellite A300-247, turn off A few minutes later, I play games

  Hello to all the forum members

  A year ago, I bought a laptop model Satellite A300-247-Part Number: PSAGCE-0CQ00CG3
  Whenever I would play him in games and everything was fine. Lately I play a few minutes the computer turn off only in the games, anyone know what could be the problem?
  Could be accumulated on the video card in dust?

  Thanks everybody hope I've explained the problem properly!

  Everything is possible.
  When you play these games is the laptop sitting on the desk?
  Don't forget the fan inside is not blocked somehow.

• Error display driver while playing games on Satellite P100 - 387 PSPA3E

  Hello

  I have a portable Satellite P - 100 387 PSPA3E (with Nvidia 7600 GO 256 MB) and any game I play, I get a Stop error - blue screen of death all the time and must restart.

  Sometimes while I play 'Command & Conquere-Tiberium Wars' or 'Warcraft III' (which can run on ANY machine of low-end). Because the update of the BIOS and got the last support display driver Toshiba. Nothing. In addition, I ve tried ALL versions of Nvidia and LaptopVideo2go.com pilot with modded inf-s.

  Don t know what to do, I post here before you contact Toshiba. I have a valid warranty on the computer. Running MediaCentar of XP that came with it.

  Thanks in advance!

  Hello

  I put t really know what to say. Before you wait here, you should contact the Service partner in your country and leave check your laptop. You must explain what is exactly happening.

  I hope that they will be able to help you. Please let us know if you will have more info on this issue.

• Cannot set the screen stretched after playing game. HP Pavilion dv6000 Notebook.

  Hello

  Once a game my screen stayed tight, horizontally lying. Normally my screen is returned to normal after closing the game Rollercoaster Tycoon 3, but this time it somehow stuck or something. I checked the resolution: it's 1024 x 768 like it always was, so this isn't the problem. When I "Print screen", the image is quite normal on the other computers, so I think it may be the driver? Do I have to download Driver NVIDIA? I tried, but he says that the driver is not compatible with my hardware. I think I can find one that is compatible, but first I would like to know if this will fix my problem.

  Thank you

  DD

  I had a contact with HP customer service, and I tried many things. Restart the pc, download the drivers, nothing seems to work. The guy said I had to reinstall windows, and the screen was fine still... Here, there was a simpeler for this solution, but I'm glad that my screen is normal now.

• The video glitch weird after playing game-resolution is wrong and I can't back down.

  I tried to play a game on my laptop and there was a small problem and I had to force quit. My screen is now in a permanent sort of zoom and its driving me crazy. I tried the system restore and delete the file, but nothing does! Help, please.

  Tried to change the resolution?

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/change-monitor-resolution

• BlackBerry Z30 BlackBerry z30 very hot when you play games

  I play games call iron man 3. I play 5 min, then hot. Sorry for the bad English.

  It's normal. Even with all devices, be it an Apple, Samsung and BlackBerry.

  Games will consume much more energy than typical applications. Because he needs more graphics processing, therefore, more power is consumed. So that power to be fed, more electricity is used, therefore, battery will empty faster. As well the battery more quickly drain and increase the heat generated in the results of calculation and more

• C: drive turned into raw and now I can't see file display options etc on my computer.

  Original title: instability of the system.

  I have xp s3. I had trouble with my main drive lately. Previously, I had my shot raw c drive and I can either logon in safe mode. I used checkdisk by my slave hard drive someone to another disk and it comes back with a few interface problems. Yet once the obtained c drive turned into raw and now I can't see file display options etc on my computer. I tried to use to start the system restore but not its use before and now. I have avira for antivirus and Registry Mechanic only. Is there a way I can fix my windows without formatting evrything?

  Hi Windflash,

  I had a similar problem also and it turns out that the hard drive is dead. You can probably do is to connect the hard drive to a working another computer & use data recovery tools to recover files from it but usability will always be a question.

  Data recovery is an another stressful job as for me it took 3 days to recover data to a 500 GB drive.

  After which I tried to format it own it but has not as well so I poured the reader.

  You can try my snack suggestions if your drive starts to work again I strictly recommend you to use it as a primary drive.

  Let me know if it helps.

  [If this post was helpful, please click "Yes" under "Was this helpful option?". If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Blend Modes ('bright light') in After Effects?

  I discovered that in After Effects CS6 (Win7) some blend modes seem to not work as expected.

  I have a bitmap with transparent above other bitmap and want to mix with "bright light" - but the result is the same, as if I had no merger mode at all. It is the same for 'hard light', 'linear light' or 'hard mix.

  Other blending modes like "multiply", "soft light" and "overlay" work very well.

  Does anyone have an idea what's wrong with my After Effects?

  If you imported the PSD file with the blending modes defined this way instead of PNG ones, AE should have created Layer Styles property group. Drilling down this ownership group reveals the property opacity of fill under Merge-> Advanced Blending Options:

  

  In order to correct your design created from PNG files, you must export the layer with 100% Fill first, and then you add any layer Style of the layer-> Layer Styles menu (or right-click-> Layer Styles) - that creates the layer Style group property of the layer. After that, you are free to manually delete or just disable the eyeball and enjoy working with the only blending Options property group.

• After that the threshold.vi, GRAYSCALE U8 type IMAQ image turns into a completely black image.

  I want a threshold, the image of u8 after equalize.vi, but the result is the image turns into an image.before completely black equalize.vi, i use histogram.vi and the interval is (0,0) .where is evil? I really appreciate your help.

  Unless you enter a value in the entry 'Replace the value' threshold IMAQ, your output pixel values will be 0 and 1.  In a grayscale image, you will not be able to see anything.  Try to define the 'replace' value to 255 and see if the data appears.  Here's a note from the help file on this function.

  Note  Use a binary palette when you see an image that a threshold was applied in mode replace. However, what range to use for viewing depends on the replacementvalue. For example, viewing a picture of threshold could be achieved with a palette of gray. However, in this case, please use a replacement value of 255 (white) to better see image of threshold.

• Display lights after that PC is awakened from his sleep 10 Windows.

  I have exactly the same problem on the Envy 17-k100.  My system has behaved very well even after the 10 Windows upgrade, but suddenly began to expose these problems once some sort of update has been installed within the past few weeks.

  Hello @Dongledad,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the question of Sleep Mode and tried to help you!

  Please see the post by community member DanG82, which explains how to fix the problem: insomnia with Windows 10 mode

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Kind regards!

• AS100V Cam action freezes / turns into a brick

  Purchase just this new cam action a few days ago started using it yesterday parsimony; basically tried some functions.
  
  I see a very annoying problem:
  
  After login with my iPhone PlayMemories Mobile 5 s (maybe go in and out of the application, as in normal operating conditions), the LCD would display screen 'movie' with flashing icons, including the word "Wait".  This screen does not disappear even after a long wait and PlayMemories Mobile can't connect to the cam when this happens.  If I can go to another screen by pressing 'Previous' or 'Next', screen flashing including 'Wait' goes, and I can go to the other functions/menus.  But if I then turn 'Power Off', then the cam will not turn on again next time I click on 'Previous' or 'next '.  It becomes dead as a brick.

  I have to remove and reinsert the battery, then the cam working again.  But the same problem occurs.
  
  I tried to reset; does not solve the problem.
  
  Does anyone have a solution?  It looks like the software on the cam action and/or PlayMemories Mobile app is buggy... but I don't really know.
  
  I don't think I can keep this device if it behaves like that...

  Hi Sufi of the convenience! Please make sure that the memory card is inserted correctly. The error message 'MEDIA' is an indication of the following: