Display works only for 2 or 3 seconds after it is black on the Qosmio G50

Similar Questions

• Firefox regularly (every 8 to 15 seconds) freezes for 1-3 (in seconds) after a half hour of work

  Firefox crashes on a regular basis (every 8 to 15 seconds) for 1 to 3 seconds after half an hour of work. I freshly installed my windows and firefox (without extensions), but the hook has yet occurred. Don't know how to solve this problem. Maybe it's a memory problem? (I have 4 GB of RAM, which should be enough). When it crashes, it leaves to scroll through, write or do something else, but if I try to do, he says, but after a few seconds. This happens regularly, it's very annoying, especially when it crashes looking at youtube - video stops, turn on audio and a video catches up with a video after a few seconds. Thank you very much for the help.

  This has happened

  Each time Firefox opened

  Is very long

  Try running Firefox in questions to troubleshoot Firefox in Safe Mode. If that fixes it, disable extensions 1 by 1 to find the culprit.

• EPMA works only for IIS?

  I used asked the same question before, and I think EPMA works only for IIS, but I want to use IIS and Apachy, and apachy is for most services, IIS is only for server size, for the configuration, I lost my way, should I need to set up manually? Now, I have confirgure EPMA with Apachy without IIS, a service does not start, please notify.

  I think you're getting confused with Apache and IIS. EPMA don't use Apache, it uses a combination of weblogic (if it's the choice application server) and IIS. Uses of the EPM parts on IIS are installed automatically, you have just to make sure you have you upward and running .net and .net enabled in IIS.
  Apache is used as workspace server plugin, IIS can also be used as a plugin.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  Don't know what you mean by vertically but it is normal that the  watch to display the time briefly when removed from the charger. If the  Watch is held horizontally with the number key of Crown and side on top can be turned. This is normal and is the point of view of bedside table.

• Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?

  Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?

  Hello

  What operating system do you use?

  Method 1:

  I suggest you check in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  I suggest you to contact Samsung support center and check out.

  http://www.Samsung.com/AE/support/main/supportMain.do

  http://www.samsung.com/ae/support/search/supportSearchModelResult.do?menu=SP00&searchWord=SamsungSyncMasterB2330monitor&default_searchInputBox_value=Enter+model+number+or+keywords&searchInputBox=+Samsung+SyncMaster+B2330+monitor+

• ListView - multiple selection works only for StandardListItem

  Hello

  In the meantime, this ListView object are less contraingnant to use; I modified my UI to work as an example of application of Battambang.

  But I have another question

  I use a GridListLayout (such as sample app stamp collector) and my ListItem is a container custom instead of StandardListItem.

  Unfortunately multiselect Manager works only with StandardListItem

  In my case, the context menu is empty!

  RIM is able to provide a sample of collector of stamps with GridListLayout? and multi select Manager / work context menu? and to highlight the points of stamps feature works in multi selection mode?

  Nicolas

  Indeed, the DeleteActionItem is not visible all in Multi Mode. I also tested is not serious if it is set with GridListLayout or not and even deleteAction.enabled of adjustment.

  I have raised a question of public affairs to do this, https://www.blackberry.com/jira/browse/BBTEN-173 so, please vote for it when you get a chance.

  See you soon,.

• How to connect the Qosmio G50 for set-top box

  I just got a Qosmio G50.
  I am trying to connect to media player via my cable box.

  The manual says to connect via an rf cable.
  But as the signal is provided by cable SCART, of course, this won't work.

  Anyone has any suggestions as how work around this problem.

  Thanks in advance

  I agree with Akuma.
  Check the connections you may want to use a different connection.

  If you use an adapter, this could make problems.

• WMP 12 crossfader improvement settings set to 10 seconds, but seems to work only for the last two seconds

  WMP 12 issue and crossfader

  I use WMP9 for about 2 years and the crossfader option worked
  perfectly. I recently got a new laptop (HP) which came with WMP12/W7. I copied
  all my wav/mp3/wma from my old laptop to my new and all of my
  playlists. When I now use WMP12, I crossfader set to 10 seconds, but most
  at the time, it seems that it works for all the last maybe second,.
  two. What can I do to find out why WMP12 on my system won't allow any more
  My crossfader for 10 seconds to work.

  Thank you!

  Joe...

  I downloaded the free version of monkey media , and he did all the things I used in WMP.  A transition, looking tacky to name a few (more, he in fact finds all my media) so for now, I'll move this product until MS fixes WMP. I'm not holding my breath ;)

  Joe...

• Satellite Pro L300 - Display works only on the external monitor

  I received my new Satellite Pro L300 tonight & followed the instructions one by one. Although the power etc. lights were turned on, I had no monitor display at all. I then plugged on my old pc monitor who * fact * work. I tried pressing Fn + F5 but still nothing on the screen of the laptop?

  Thank you, Adam.

  I think you need to bring your laptop to an ASP. They can check your laptop and exchange all necessary parts.
  I think that your laptop is under warranty, if the repair is free for you :)

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• Control/sleep of PL/SQL loop works only for expected less than 90 minutes

  Hi all

  I was wondering could someone help me. I've written a procedure that checks to see if a condition is true, and if it ends successfully. If the condition is not true he sleeps for a minute and then try again. If a time-out value is filled the procedure raises an error. This timeout is passed into the procedure in a few minutes.

  My problem is that the procedure only works if the smaller numbers are passed. I tested with success in 1,2,5,10,20 and 30 minutes, but if I spend 90 minutes it is regularly indefinitely (I let it run for more than 2 hours before killing him).

  CREATE OR REPLACE PROCEDURE proc_wait_test (p_minutes_wait, INTEGER)

  IS

  var_start_date DATE: = SYSDATE;

  var_check_result NUMBER: = 0;

  BEGIN

  WHILE TRUE

  LOOP

  -fake check which returns always false just to test the concept

  SELECT count (*) INTO var_check_result FROM DUAL

  WHERE 1 = 0;

  IF (var_check_result > 0)

  THEN

  EXIT;

  ON THE OTHER

  IF (SYSDATE > = (var_start_date + (p_minutes_wait/1440))) THEN

  RAISE_APPLICATION_ERROR (-20000,' procedure has expired, waiting specified limit of ' | p_minutes_wait |) "minutes exceeded.");

  END IF;

  END IF;

  DBMS_LOCK. SLEEP (60);

  END LOOP;

  EXCEPTION

  WHILE OTHERS THEN

  lift;

  END;

  The procedure is designed to integrate into an existing solution, so I can't change the basic features. Database version 10.2.0.2

  Thank you very much in advance for any help.

  Steve.

  Hello Steve,.

  We have this kind of question here: Firewall silently kills idle connections more N minutes (and when there is a high load on the firewall, the "N" decreases aggressivly).

  In the "Workaround", we used "DCD" (dead connection detection) as clients of the server pings on the side of all the N minutes (we use 10), the original purpose of the CR is to interrupt the session side server if the client is gone. but we are interested in a "side effect": This causes a part of the network traffic it is enough to "cheat" the watchdog of firewall.

  Very easy to implement: the server side, in sqlnet.ora:

  SQLNET. EXPIRE_TIME = 10

  (active next time the other is started)

  Best regards

  Bruno.

• Why is my 4K display works only with Mac OS on a mac pro?

  I have a Mac Pro (Darth Vader trash) 2013 edition.  I installed today to MacOS of OS 11.11 El Capitan.

  My monitor AOC 4K (U2879VF) no longer works.  Using a miniDisplay port to display port is to connect to the MacPro.  It worked very well with El Capitan.

  Any thoughts?

  My MP 2013 works very well with Sierra with my Dell UP2414Q via mini displayport > cable displayport

  Have yo reinstalled the cable ends?

  Next:

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

• Need help Urgent, a Site on the 2 areas, edge of animation works only for a single domain (not the domain clients)

  Hello

  need help with something really strange.

  I create a Restaurant website: www.arkadasch.de

  I test on my server the Site: www.bbaur.com/arkadasch

  As you can see I got the top of the page an element Ede animated.

  When I look at the site on my server www.bbaur.com/arkadasch, you see the element works correctly. You see on the two sites of the 'face' of the apearing name.

  I have download the site now the clients site and the edge of animation is showning only half? Only the name of the left site is apearing and not that of the right?

  I downloaded the same site two areas and it is always the same. My only he is on the right.

  I have delate my cache also.

  Someone has an idea?

  WOW-found the error.

  The name is written 'o'. and the psd file is named «Özden»

  I have change the name of "ozden" to "zden', delate the German symbol 'o'.

  Modify the edge of animation, save again, insert into Adobe Muse and now it works

• Is vim25 api works only for vSphere 5.0 or it also works with 4.1?

  No doubt trivial question. But I want to get confirmation of specialists esp w.r.t. to API (vim/vim25) as well as the all the versions they support.

  Thank you

  Kind regards

  Dreamer

  vSphere 5 is backward compatibility with vSphere 4.x, which means that you can still manage and exploit the features/capblities of vSphere 4.x using the vSphere SDK 5. However, the features/capablities in vSphere 5 are available only if you have a vSphere environment 5 as the DRS of storage for example.

• New serial key works only for CS2

  Hello

  I did all the steps of error: Activation of the unavailable server. CS2, Acrobat 7, pass a hearing 3

  and the Installation of the new CS2 worked fine, the key to series on the download site was accepted.

  I wanted to start Indesign, and he asked me again for the key.

  I gave him the key as well as Installation, but this time it did not work.

  What can I do now?

  Need help.

  Thank you.

  Solved because of Windows 7 is not compatible with Adobe Photoshop CS2 - Microsoft community

  I had to change the installation directory C:\Program~2\ because of the Version 32 bits of CS2

• Thin provision NFS works only for instant VMDK

  Hi guys,.

  We have a host of ESXi 4.1 using NFS as a storage device. NFS is provided by the platform, Bluearc Mercury.

  Whenever I create a new virtual machine, for Thin Provisioning option is checked but also gray outside. There is a line saying:

  "Actual allocation policy will be determined by the NFS server.

  I'll check the newly created VMDK and it's a thick disk, it consumes as much disk space I put for the disc size.

  So, it makes me believe that the Bluearc Mercury does not support provisioning.

  The strange thing happens after that I did a snapshot, another VMDK as server - 0001.vmdk was created, and it's the thin disk.

  Someone at - it the similar problem?

  Kind regards

  Derrick

  Showmanlkz,

  On the BlueArc server, file systems are provisioned files, thin as VMDK files are created as "fragmented files".  Just a slight difference in terminology, but the effect is what you're looking for in what concerns the commissioning only the disk blocks that are actually used (thin provisioning).

  If you have created a 10 GB VMDK file, but have only 5 GB of data on the inside, only pointers to these 5 GB of data blocks will be created.  Us will not pointers to blocks of empty data.  Standard orders will make reference to the metadata VMDK structure and will report on the 10 GB file.  In order for a command 'df' to show the use of real drive (5 GB), rather than the allocated size (10 GB), you must enable the "true fragmented file" mode.  Contact the BlueArc TAC for the real run command.

  Snapshots are a completely different beast.  By default, they are only pointers to a point static instant copy.  However, if you use our new feature JetClone to create clones in entry level file, these files will be also thin provisioned, only as the clone diverges in content data from the original VM has been created between more and more.

  Julie HG

  Product Manager, BlueArc