DisplayPort has worked for a long time, stopped after docking

Similar Questions

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

• EditingUtils.js has worked for a long time

  In a recent thread I inquire how to bind to a specific Spry Panel on another page. I got a very helpful answer with a link to a tutorial that describes the need to download the latest version of Spry and copy SpryURLUtils.js to site SpryAssests folder. The link works fine, but when I want to open these pages in DW and work on them, I have a LONG period of spinning Rainbow ball followed by this message:
  
  "A script in the file MyDisk:Applications:Adobe Dreamweaver CS3:Configuration:Shared:Spry:DesignTime:EditingUtils.js worked for a long time. Do you want to continue? »
  
  Click 'Yes' or 'No' to display the dialog at least once more until the page is accessible in the interface of DW. I don't know if I have a current version compatibility thing or what. Everyone knows this?
  
  JAY

  I found my own answer in this tech note of.

  Not hard to fix. Just that I have little hack.

• Startup Repair has worked for a long time, saying: 'attempt to repair' can I stop him?

  Ran the Vista system, the installed files recovery, asked to connect, file froze, closed system, says no hard drive found.  Set recovery disc has chosen once again, startup repair and it worked for about an hour without any action.

  Check:

  http://www.Vistax64.com/crashes-debugging/289617-Startup-Repair-cant-cancelled-still-running.html

• Problems with outgoing mail / STMP server after has worked for a LONG time...

  Recently I started having trouble with sending an outgoing message. Beyond out lickety split with no problem. Now, once I click on SEND, I get window to send the Message reading "status: connected to stmp.primus.ca...» "but the progress bar continues just to go and go and... rather than a telling me the message has been sent."

  Sometimes the email finally gets sent, after taking in "shipping time E-mail" what's FOREVER, sometimes by that email is not to all and I get the message "send message failed. The message could not be sent using SMTP server smtp.primus.ca for some unknown reason. Check your SMTP server settings are correct and try again or contact your network administrator. »

  I looked in my SMTP settings and noticed that, in aid of Primus, he said the outgoing server port is 465 while mine has been implemented (and worked for ever) 25. I have also noticed that help Primus said connectivity should be set to SSL/TLS, while that mine has been set (and has worked forever) to zero. I made these changes (first simply by changing the port #, then both) but this does not solve the problem.

  I've recently updated Thunderbird to 31.7.0 and I think that these questions CAN coincide with this update, but I am not sure of the time. If this is the case, is it possible that I could get back to the old version of Thunderbird... or move in this way another? ID of the update was not the questions, someone has an idea or an idea on why this would suddenly be a problem with Thunderbird?

  Or should I contact Primus technical support and try to sort it out with them?

  Thanks a lot for listening.

  Your anti virus got an update. We get a rash of these every time updates to Thunderbird. The cause is always an anti virus program. usually, Norton or Alvira, but they all get a mention.

• Update KB961118 continually appears in my system tray, but does not install after that many try. How can I remove it. This has happened for a long time. Help

  Update KB961118 continoulsy appears in my system tray, but the update does not install. How to remove OR install. This has happened for a long time. Help

  KB961118 is an option, not the security update. Feel free to hide it & move on with your life. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Create the accounting working for a long time program

  Hi hussein.
  
  
  Our 'create accounting' program is now strange. We running for a long time. In my view, he hit a data of the exception or blocking.
  I run perfstat to trace the problem?
  
  
  Thank you very much

  Hello

  Please refer to (Note: 453527.1 - how to Trace a competitor ask and generate TKPROF file).

  Kind regards
  Hussein

• A Script in the UNKNOWN file worked for a long time. Do you want to continue?

  Of course I do, but I can't. I click 'No' and Dreamweaver hangs. I click 'Yes' and Dreamweaver hangs.

  • Windows 7-64 bit
  • Generation of Dreamweaver 2014-6733
  • See attached serigraphs of the awesomeness of editing files .cfm with Dreamweaver on my computer.
  • I can open HTML files with no problems and most .cfm. I can't open some .cfm files.

  So I pinned it down to this excerpt:

  Dropbox - problem_script.php

  Most of the changes to the file at this point will allow dreamweaver to open it, but not in the above report. What is interesting is that simply by changing setting indented or a variable name has helped with dreamweaver open the file... Now, in the file original with many functions, changing the indentations large PHP no longer works. Remove this part the large file fixed my problem:

  Stampin' = $("#entryCheckinDate") .datepicker ("getDate") .getTime () / 1000;

  EDIT: actually, it turns out that all I had to do was replace the above line with:

  Stampin' = $("#entryCheckinDate") ["datepicker"]("getDate").getTime () / 1000;

  Now it works

• Why using Mozilla to enter a web site is my password rejected when he worked for a long time. PASSWORD is corerect

  Years my password work when you use MOZILLA by accessing the web site XPRESSBET. Now
  my password is rejected, but it works with other browsers such as Google Chrome or Internet Explorer.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

• error code 80240016... This has happened for a long time... .the updates are for Microsoft Office systems... 2007

  ERROR CODE SAYS 8040016... ITS ALWAYS SOMETHING TO DO WITH MICROSOFT 2007 OFFICE SYSTEMS, OR JUST MICROSOFT OFFICE SYSTEMS.  IS IT POSSIBLE THAT MICROSOFT OFFICE IS NOT ON MY PC... HOW CAN I KNOW IF IT IS OR ISN'T?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi heather196565,

  Method 1

  Check the link and try the steps mentioned below.

  Windows Update, error 80240016
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80240016

  Method 2

  If the previous step fails, then reset the Windows Update components and check if it works.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista has stopped turning the games run for a long time.

  Vista has stopped turning the games run for a long time. The display would go crazy and the sytem would lock. Gotta make a stop with the power button. No errors are recorded. I re-installed the game. Same thing. I reinstalled Vista 64. Same thing. I get about 3 minutes in the game and then locking the. 1 single game still work (BioShock2). COD - MW2 and COD MW lock the sytem. One is direct install, and the other is the steam. I have a video card Nvidia GTX 280 with the latest drivers from Microsoft. Before the reinstall, I tried to install the most recent NVIDIA. Did not help. Yet the locks without showing error. About half of the time it stops at my off video card a few seconds after that the display goes crazy. BioShock uses DirectX 10, and others use DirectX 11. I read on some sites that 11 causes the video crashes on some systems. I want to know is why 11 is working for so long and stop NOW. Is there a way to make the games all run on 10? COD BlackOPS crashes too. I played ALL these games over and over again until the last 3 weeks. If there was some error to post logs I would but there is not. Any suggestions on where to find some kind of problem that could cause this? The video card was removed, cleaned and put back into the computer. Still crashes. 1 in 4 of the games will take place without any problems. 3 will be blocking of the computer and the video trash in 3 minutes or less to start the game. The video is great, until blocking.

  Suggestions on how to fix or where to additional troubleshooting for the cause will be greatly appreciated.

  Try running the memory and the hard drive scan to make sure that both are good.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  If both check good, the map may be at fault. In which case it is overheating you can manually increase the fan speed in the Nvidia Control Panel.

• When I select recently bookmarked it works ok, but when I select unsorted bookmarks it opens a window not closing cycles for a long time.and I want to close the window manually and not automatically

  When I use the selection recently marked with a bookmark in bookmarks, it works very well and load the page quickly and opens another window. but when I go to unsorted bookmarks and double-click on the desired bookmark it loads very slowly and cycles for a long time. If I go to the firefox icon in the Launcher on natty 11.04 with unity it shows two open windows. I click on the unsorted Bookmarks window and manually stop and it works well and unordered finishes, loading the bookmark page I was trying to see. Why the unsorted Bookmarks window closes on its own? Is there a setting I can do close automatically. It really slows down the loading of the page, I tried to see. well thank you for any help or advice.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock?

  I'm locked out of my ipod5 that I have not used for a long time, it is not connected to the Internet or iTunes is anyway can I unlock? In my opinion, it works on IOS8. Because I have not used in a long time, it has reset and does not connect to the wifi until I unlock, and I forgot the password to unlock it. I tried to clear up my iPhone but it requires Internet and iPod can not connect to Internet ithe, I also tried to restore the 'home' button and the lock button while connected to iTunes on my computer and that did not work either... Please let me know if I haven't tried something or have missed something.

  Thank you

  You have to follow the instructions for the erasure or use recovery mode in iTunes again. . You do not specify what happened when you tried to follow these instructions, or instructions for iTunes, which you tried to follow, but you will be able to exit the mode disabled via iTunes if you do not have Wifi:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  See you soon,.

  GB

• Hi all, I need a little help to try to solve a problem of updating Bios for a long time.

  I downloaded the new update of the Bios on the HP site. But when I try to install the update, the process goes up to only while it presents me with an error. Any help would be appreciated, I am trying to upgrade the Bios for the new firmware in order to perform a better processor. Thank you...

  Error code: 3033

  "GoTo" label not found

  on line 89 of w:\patches\i...ate\windows\installer.wbt

  My system is...

  Compaq Presario SR1339uk

  Serial number: CZB5050HBW

  System number: PS267AA

  Motherboard: Asus PTGD1 - LA

  BIOS version: 3.13 12/14/04

  Operating system: Windows XP Home Edition

  Not sure what's going on here, but here is a suggestion on how to properly install manually the update of the BIOS.

  Assume that you download SP26760.exe (BIOS 3.28)

  Start the update - go to the last message you get before it fails and stop. (must be where it prompts you to close the applications and will be saved).

  Open a DOS (command prompt).    You must be an administrator - so if you're running Vista or Win7 - make sure that 'run as administrator ' at the opening of the box.

  Once in the BACK, type:

  CD FOLDER

  go the the directory of temporary files.

  Then make a

  DIR /S 328.LE ROM

  to find the directory where the update files are located.    Type CD < directory name > to go in this directory (on my system, it was a folder called pft467D.tmp, but it might be different on your)

  CD pft467D.tmp

  Now manually invoke (the prompt back, no windows or the windows file manager) the update, with the appropriate switches.  By omitting the switches can cause other problems, as have reported activation of Windows problems.

  AFUWIN /i328. ROM /pbc

  For reference, on my system, here's what I saw in these folders:

  C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > dir

  Volume in drive C is DRIVE_C
  Volume serial number is FE8F-4AA6

  Directory of C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp

  26/04/2011 11:11 < DIR >.
  26/04/2011 11:11 < DIR >...
  24/01/2006 15:31 524 288 328.le rom
  01/07/2004 10:54 53 248 AFUWIN.exe
  01/07/2004 10:54 amifldrv.sys 6 912
  21/02/2006 18:08 526 374 Installer.exe
  09/05/2006 17:10 sp26760.rtf 1 784
  11/04/2005 10:55 398 696 WBDEG44I. DLL
  6 file (s) on 1 511 302 bytes
  2 dir 110,361,944,064 bytes free

  C:\Users\sumsolstice\AppData\Local\Temp\pft467D.tmp > AFUWIN i328.rom /pbc

  It should work OK, however no guarantee if there's something else - but essentially - that's what the installer should do.   If this does not work for you - I wouldn't try to force things - you can make a good motherboard unusable quickly.

  For those who are looking to this announcement - the syntax is for this motherboard only - switches may be different for different motherboards.

  Good luck.!

  -DM (while I am an employee of HP for a long time, the comments/suggestions here are my own, not those of my employer).

• 6700 HP eprint 'in progress' for a long time

  I couldn't eprint to work with my Chrombox. It works fine from iPhone or iPad. Initially, he showed ' error ' State. " After you removed and reinstalled the HP 6700 x, the situation has become 'in progress' for a long time. Any suggestion on how to solve this problem?

  Thanks for your reply, but I already solved the problem by myself. I had to reset the configuration of the printer of the Chrombox and restart chrome box to activate the new configuration. It worked for me.