DisplayPort to DVI adapter is generic Non - PNP monitor

I have a 6 week old want H8 - 1420 T C1U69AV #ABA, Windows 8 64 bit, 1 GB Radeon HD7670 and I am trying to connect two Dell 1905FP monitors. Each monitor works fine when it is connected to the DVI port. When I connect a monitor with an adapter HP DisplayPort / DVI dongle, the system reports it as a generic Non - PNP monitor and the screen remains black. I tried the adapter on another system, and it works fine.

I've updated to the new '8.982.10.1800 Rev A January 3, 2013' driver on the HP site, but it did not help. The AMD drivers will not install because it is apparently a video of the ugly step-child card, not a true AMD. If I knew that I would have not purchased with the system.

I have the original of the 1905FP CD when I bought it and it isn't a driver file on this subject (no need of one with XP). When the monitors work, they are each reported as a 1905FP.

Someone at - it suggestions?

Thanks for the suggestion, but this has been resolved over the weekend. I was using a passive adapter Displayport to DVI. I replaced it with a Startech DP2DVIS active adapter Displayport to DVI and that did the trick.

Tags: HP Desktops

Similar Questions

  • Windows 7 detection as a generic non - PnP monitor, cannot set 16:10 resolutions.

    After the reboot, I noticed my resolution has been reset and when I went to go put my Native resolution. I discovered that it wasn't on the list more, and that it has detected it as a 'generic Non - PnP monitor '. Updated video card, CCC, he admits to 1680 x 1050 60 Hz max resolution.

    Video card is an ATI Radeon HD 5750, Monitor is a 20.1 "Soyo MT - NI - DYLM2086 DVI.

    Drivers Vista will also work.

  • Windows 7 'generic non - pnp monitor '.

    I installed the drivers from nvidia windows 7 (190,62) and it works fine, except that I can't change my resolution to 1680 x 1050 for my 22 inch LCD V7 R22W02 display! It presents itself as 'Generic Non - PnP Monitor'. When I update the drivers, it says that the Non - pnp drivers are up-to-date. The maximum I can choose is 1600 x 1200 which makes all crushed. My monitor is plug'nplay (!) and I can not launch the drivers from the site Web V7 because they are 32-bit.

    I had this problem until I fixed it.

    Problem: the resolution of my screen changed all of a sudden, the screen was LCD ACER monitor..., but it changed for non-Plug-and-Play monitor generic.

    Solution: what I did unplug the power cable that is connected to the monitor when the PC was on.  Then I plugged it to the screen after a few seconds.  I was so happy that my screen resolution was all perfect again! Haha! Simple =)

    I hope this works for anyone having this problem too.

  • Unable to set the display resolution, Intel HD 4600 in Device Manager displays ' generic non-pnp monitor low resolution.

    I am slot as Windows 7 Pro on a Dell Intel 64 bit pc with a screen HD Dell I5 and Intel HD graphics 4600 driver.  PC woke up a few hours of inactivity, after no updates known to windows or other programs, with icons and pages double size beyond the limits of the monitor, setting the low resolution and Device Manager showing ' no generic pnp monitor low resolution ' instead of 'Monitor Dell HD' and no option to increase the resolution.  No help with reset, not restoration, disconnection and reconnection monitor auto plug n Play, 'Search new device', 'add a device', update of the graphics driver, reinstall the drivers from the Dell monitor.  Troubleshooting peripheral reported to date and working correctly.  After I finally uninstalled driver restarted, and graphic displays "default monitor" Device Manager (no longer "generic low resolution"), no graphics driver identified, but don't allow me to change to a higher resolution.  New windows had to be individually size / expanded to fill the screen.  This can be corrected?  I want to optimize my display settings for this monitor.  I have reinstall my graphics driver or just be happy that I can use my computer?  Thank you.

    Call Dell.  Your monitor should have a 3-year warranty.  Your matching OptiPlex with a warranty of one year more.

    Also, check all the hidden and invisible buttons on the monitor.  Someone may have inadvertently changed one of these.

  • Resolution of Windows Server R2 2012 stuck at 1024 x 768 generic Non - PnP

    Hello

    I want to have my own windows home server, so I installed WindowsServer 2012 R2 on a laptop Aspire 7740. But the laptop does not screen because I don't need, I want to order the server remotely via VNC. The problem I have with the server, it's that I can't increase the resolution, so if I use VNC only 1/4 of my remote screen is filled with the desktop of the server due to the fact that my remote screen resolution 1920 x 1080.

    Is it possible to increase the resolution of a generic Non - PnP monitor? (I tried to install the drivers from w8.1 but it did not work)

    Greetings

    healing

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    TechNet forums:

    https://social.technet.Microsoft.com/forums/en-us/home

    MSDN forums:

    https://social.msdn.Microsoft.com/forums/en-us/home

    See you soon.

  • Generic Non - Pnp Moniter Fix?

    Today I turned on my computer and the resolution is really too big, I went to the resolution of the screen and discovered that the resolution, it was fixed to the Max. So I searched the Internet for a few hours and found a way to get back to the original resolution. But now my monitor will not register and not displayed as generic Non - Pnp monitor. Ive updated all possible drivers and still nothing. I tried to unplug my monitor and the computer for a few minutes, but nothing.
    Monitor: Dell ST2320L
    Computer: Inspiron 580
    6 GB of Ram 64 bit
    Intel Core i3 550 @3. 20 ghz, 3.20 ghz

    Open Device Manager > monitors. Open the generic monitor and click the driver for the update. Choose 'Browse my computer for driver software', her choose "Let me pick from a list...". "Uncheck the"Show compatible hardware"and scroll to Dell Computer Corp. look in the right column of your monitor, and I hope that it is listed.

    SC Tom

  • Monitor undetected, only non - PNP monitor used

    I have been using Windows 7 and an external monitor, an Acer AL2216W, for several weeks.  The wreck of monitor to 1680 x 1050 was used.  I rebooted and now 1680 x 1050 is no longer a choice.  When I use the widget of the resolution of the screen, it lists the monitor as generic non - PnP Monitor.  I have a choice of different resolutions, that which some only displayed.  I chose to use 1600 x 1200, but the fonts are blurry and 1680 x 1050, the characters are crunchy.  I tried to install the driver for the Acer AL2216W monitor, but windows tells me that she loves her current driver more and it won't install it.  Do you know what I could try to have this monitor correctly detected?

    Thank you!

    This is resolved.  The monitor must be disconnected, turned off and then reconnected.  Having done this, the monitor is again detected by all computers.

    Thank you

  • Windows 7 sees my second monitor as "generic non - PnP" and will not let me set the correct resolution

    Hello

    I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).

    I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.

    I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.

    I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.

    Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).

    I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.

    Thanks in advance,

    Alan

    PROBLEM SOLVED!

    It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.

    Thanks again to all who have suggested things.

  • Non - Generic PNP monitor problems

    So a few months ago, I had a problem with my PC where it would do the sounds of disconnection/reconnection as im Plug and unplug a USB... I had no idea what it was and he finally stopped.

    Now, she came back and found out that the cause is what is called my 'generic Non - PNP monitor' I had my window peripheral upward and the noises at the start I looked and saw that coming in and out of connection and other. I only use 1 monitor and run Windows 7 Home Premium.

    I had first turned off this unit and it stopped for a few minutes then it re-enabled itself and started to act up again. Then I uninstalled the driver, but he quickly reinstalled itself... I ended up re - turn off and unplug that I discovered on my screen plugged into my hard drive internal, but also my Radeon. Since I unplugged I have not heard but I want to know if it was the real problem or I'm just have a chance with her?

    Hi Nathan,

    Thanks for the reply.

    It seems that your computer detects that you have another monitor connected. You have a monitor to fix?

    You can set the second monitor in mirror and then disconnect. That could prevent switching monitors.

    Hope this information helps.

  • Connection to a TV with HDMI output with a Dual-Link DVI adapter

    I have two monitors connected to my MacPro late 2013, an HDMI port and the other on the Minidisplay port (with a Mini DisplayPort to DVI adapter). Then I have a third monitor used for dubbing tracks, (22 in.) connected to an another mini display port with a Mini DisplayPort to Dual-Link DVI. Now, I don't want to connect to the Dual-Link DVI adapter a led TV 40 "in replacement of the monitor 22 '', so that I can make the tracks of dubbing in a better way. But the led TV has a HDMI port. The question is: can I connect the TV led to the Dual-Link DVI adapter, simply using an adapter DVI to HDMI? It work?

    Not used that exact configuration but should work.

    See here to ensure that you do not overload a single BUS:

    Use multiple screens with your Mac Pro (end 2013) - Apple Support

    Al

  • ASUS VS247H 23.6 "LED LCD, is detected by the generic devices such as 'PNP monitor' Manager My video card is detected correctly. Win 7 Pro 64-bit. It also shows that Asus VS247 in devices and printers

    This monitor works fine but is detected by the generic as 'PNP monitor' Device Manager. My video card is detected correctly. I am running Windows 7 Pro 64-bit. It also shows that Asus VS247 in devices and printers. I checked the Asus support and they do not have a monitor driver.

    Any comments would be appreciated.

    Roger,

    I'm glad to hear that.

    Just to let you know, it is often the case with the monitors.

    They will be the "default"setting, but still have the correct driver.

    Happy computing,

    B Eddie

  • Which DVI adapter is better?

    I connect an older cinema display 23 "monitor to an old MacBookPro of a year.  I have two cards, a Mini DisplayPort to DVI and HDMI/DVI.  Both work.  What is the best, or there is no difference?

    Thank you.

    With the help of the adapter HDMI releases a Thunderbolt port, which uses more than just a screen connection.

  • U2415 Display Port DVI adapter - no Signal

    Hi - I have a new U2415 that I'm not getting a signal on when I plug it into my office with a Display Port to DVI.  This is an active adapter that I bought on Amazon.  I have the adapter plugged into the port Display Port, then the cable DVI to my PC.  When I try to "detect" to the monitor displays under Windows 7 64 bit I don't see it in there.  I have 3 other monitors connected to my PC using a videocard ATI Port Quad (ALL DVI) and I know that all ports operate as I went around.

    When I plug the monitor in my book of Mack using the Display port cable accompanying the monitor works fine.  I also know the works of DVI cable very well as I tried it on another monitor.

    I also tried a CDM/DVI with another card and it does not work.

    I also downloaded the software Dell Display Manager but it gives an error saying: he needs a Dell monitor supported.

    Any ideas on why the Display port/DVI does not work?  Can someone suggest any other ideas.  I like to keep my current quad DVI video card port as they are costly to change.

    Thank you very much

    A PC DVI video card out can no longer convert to a DP monitor using this adapter. This adapter is designed to do the opposite.
    "Portable active adapter connects a DisplayPort equipped computer laptop or desktop to a monitor or projector with DVI input.

    You need this configuration =
    PC DVI out video card--> DVI converter DP --> DP---> U2415 DP DP cable in

  • DisplayPort to DVI - D X 201 Tablet/Windows 8 64-bit - external monitor has not detected

    Hello

    Until a few days ago, I ran the evaluation of Windows 8 with little fuz copy on my X 201 Tablet with the X 200 ban.

    I have a DELL 3007WFP with DVI - D only.

    I connect it to the X 200 ban using an active Displayport to DVI - D adapter of BizLink and such that mentioned, it has worked very well.

    The I ran a fresh install of Windows 7 Pro 64 bit and upgraded to Windows 8.

    Before that, I updated the BIOS to 1.4.0 (who said that Lenovo is ready for Windows 8)

    Now I get "Another deisplay not detected" when I go to the configuration of the resolution of screens.

    I've tried hundreds of different approaches (new drivers, old drivers, windows 7 drivers, drivers own intels)

    Any suggestions?

    Thank you

    For some reason any magic, the monitor is broken on today.

    I have absolutely no explanation as to why!

    What I've done since my post? :

    I went into a store and my X 201 to X 200 ban.

    At the store they have enough to unpack a DP to DVI adabter and test if my setup would work with another adabter, and he did it right away.

    Accordingly, I have concluded that my own adabter was broken. (I even ordered a new).

    Adabter at the store was an edition of small budget that would not allow me to hit the resolution 2560 x 1600, if necessary.

    I bought a DP to HDMI adabter, I tested as soon as I got home. The HDMI worked perfectly immediately (also low resolution @1920 x 1080)

    Today, I took off and entered into tablet mode, for some off GPS test. When I got home, I return the screen back to normal and placed the 201 X in the dock, and it was there, WFP 3007 DELL illuminated like a Christmas tree

    Go figure...

    BTW. I also installed the drivers for my Epson WF-7525 today.

    I tried the last combination of connection/disconnection/drivers etc with no luck, then today out of the blue - it works.

  • Monitor the changes between the PNP and non - PNP

    Hi, I'm completely stumped on this problem. I got my new PC for about a month, and during the last two weeks, I knew the Windows device disconnect sound, maybe once or twice every 30 minutes. I didn't mind at first, but now it becomes incredibly annoying. After trying to diagnose the problem, I discovered that it was a problem with my monitor. I use a VGA connection (this is the only method available right now, and I noticed in Device Manager, whenever I hear the sound of the disconnection, the driver for the monitor goes from the PNP to the non - PNP and vice versa. I have no idea why it does this, or how remedy. Any suggestions?

    Hello Adam,.

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    The monitor display anything after hearing disconnect sound?

    I suggest you to uninstall and reinstall display drivers and check the issue. Please use following steps:

    a. identify the type of adapter installed on your computer. Click the Windows 'Start' menu. Click on "Control Panel" and "system and security." Click on "Device Manager" click on 'show cards '. Your name and brand of your video card will be displayed.

    b. click on 'control panel '. Click on "Uninstall programs" under "programs". Scroll down the list until you find your video card driver; the pilot may not have your exact model in the name of the program, but it will show the manufacturer. For example, if you have an ATI graphics card, the driver would be "ATI Catalyst Control Center".

    c. Select the video card driver, and then click "Uninstall". Follow the step by step instructions, which includes generally confirm that you want to uninstall the driver and clicking on 'Next' to continue through the uninstall process. Click 'Finish', when the driver is uninstalled.

    d. navigate back to the "display manager". Click on 'show cards '. Right-click your video card. Click on "Update driver software." Click on "Search for automatically update driver." Windows will start searching online updated for your graphics card drivers. Available updates will be automatically downloaded and installed. When the driver is installed correctly and may ask you to restart your computer, Windows will notify you.

    e. visit the graphics card manufacturer's Web site. If Windows cannot find the selected driver, you will need to manually download it from the manufacturer. All the drivers are located on the "Drivers" of the Web site of the manufacturer part.

    You can also use the suggestions in this article and check if it helps.

    Reference:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

Maybe you are looking for

  • Call registry does not work

    Since the last OS update I can't access my registry of appeal. When I try to do, I get the grey call register and a dashed line in the middle of the screen stuck on 10% My last version of the OS is OPEN_FFOS_V1.1.0B01_TME and my camera a ZTE OPEN.

  • Satellite A660 how can I turn off the light on the power button?

    Hello, I recently bought a new Toshiba A660-1FL. However mind, lighting of the multimedia keys, if I work in the dark.In the Bios, I could disable the led lighting, but the on/off switch is always lighting, which distracts me when I'm working.This la

  • Measurement Studio help

    Hey,. I tried to access the MeasurementStudioHelp (2012) in the menu in visual studio 2010. He brings me here, but the page is no longer available. She moved? http://msdn.Microsoft.com/query/dev10.query?AppID=Dev10IDEF1&l=en-us&k=k (FUSINGNIMSTUDIOHE

  • Assistant device communicating with pressure gauge, but still get error 1073807246 after conversion of Win7

    I have a simple .vi I used last year to connect with a manometer. There is no pressure journal and intrigue over time. Our computers just got converted to Windows 7, and now I can't get the .vi to work. I can go in the wizard of the Instrument and se

  • Z10 blackBerry e-mail accounts

    last 2 days one of my 3 email on the Z10 accounts receive emails ok but they disappear shortly after. I can see the emails when I go on my laptop this account and they are always there but disappear off the z10 for some reason any. I checked account