Displays Windows cannot open .exe and .encre file extensions.

Similar Questions

• on xp family. Windows cannot open help and support because a system service is not ongoing enforcement.

  Windows cannot open help and support because a system service is not ongoing enforcement. to resolve this problem, start the service called help and support

  lhthomas,

  Welcome to the Microsoft Answers community.

  In doing research, I found this article in which people have found a solution:

  Help and support-Service not started

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

  Original title:

  Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

  Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

  Hello

  You did changes to the computer, before the show?

  Solution A:

  For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

  Method 1:

  Check out the following link.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Method 2:

  Connect the external hard drive on another USB port and check.

  Solution B:

  For the problem with the help and Support, check if the service is enabled.

  a. click Start, click run. In the Open box, type services.msc and press ENTER.

  b. right-click on the service called Help and Support , and then select Properties.

  c. under the general tab, set the type Startup to Automatic and click Start.

  d. close the services window and check for the issue.

• Error: "Windows cannot open help and Support." "To solve the problem, see Help and support.

  Original title: help & support

  When you try to use help and Support on the start menu, a small window opens saying "Windows cannot open help and Support." To troubleshoot the problem, see Help and support. "It's double Dutch to me. Can someone help, please?

  Hi EdwardBahr,
   
  -Remember to make changes to the computer between the calendar when things worked fine and now?
   
  Try the steps listed in the following article and check, if it helps in fixing the issue:
   
  You cannot open the help and Support Center in Windows XP
  Cannot load help and Support Windows

• Just installed OS Yosemite and now cannot open Indesign and Photoshop files

  Just installed Yosemite on my Mac, and now when I try and open my existing Indd files, I get say an error message ' can not allowed or doc can already be opened "." Photoshop files will not open due to the "disk error". My live files on a network drive of the company I have to open a session.

  Fix possible Mac 10.10.4 (at least for Premiere Pro) https://forums.adobe.com/thread/1891705

  10.10 mac. ? sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

• I can't open windows help and support. I get a message saying "windows cannot open help and support because a system service is running, to resolve this problem, start the service named help and support.

  How can I open help and support, I get a message telling me that I can't open it, as a system service runs not to solve the problem open help and support!

  How can I open help and support, I get a message telling me that I can't open it, as a system service runs not to solve the problem open help and support!

  Long time since I used XP but I seem to remember that if you do start - run msconfig [back] in my view, there are Services tab there where you can change the aid stopped service to start.

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• Taskbar & Start button office disappeared. EXE and other file extensions are not open. Printer will not print and sound disappeared. WHAT HAVE I DONE?

  OS Windows Vista 32 bit Home Premium on laptop HP dv6704nr.  I have issues.  My system restore won't create restore points and I am able to select some options in the Panel.  Can someone tell me how to recover my Start button, the taskbar and the desktop.  I've tried Ctrl + ESC, consulted task mananger and typed explorer.exe without success.  I see some options at the bottom of my screen such as the zoom level, filtering option and the mode protected Internet etc. There is no clock, battery, speaker or other standard options.  Please someone offer some advice.

  OS Windows Vista 32 bit Home Premium on laptop HP dv6704nr.  I have issues.  My system restore won't create restore points and I am able to select some options in the Panel.  Can someone tell me how to recover my Start button, the taskbar and the desktop.  I've tried Ctrl + ESC, consulted task mananger and typed explorer.exe without success.  I see some options at the bottom of my screen such as the zoom level, filtering option and the mode protected Internet etc. There is no clock, battery, speaker or other standard options.  Please someone offer some advice.

  Hé tr421

  borrow a vista microsoft dvd not a hp acer recovery etc disc and do a repair installation

  Read how to make the link below

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Walter, the time zone traveller

• How to open .docx and excel file extensions "xls" files

  I bought a new computer with Windows 8 and can't understand why I can't even open such documents in Windows 7... example extensions: .docx and .xls etcI

  How can I have access to a remedy for this problem?

  I bought a new computer with Windows 8 and can't understand why I can't even open such documents in Windows 7... example extensions: .docx and .xls etcI

  How can I have access to a remedy for this problem?

  .docx and doc are Microsoft Word files. xls files are Microsoft Excel files.
  The reason why you can not open them is probably that you don't have Microsoft Office or any compatible application installed.
  
  Despite what you think apparently, Windows 8, nor any other version of Windows, has never included Excel, Word, PowerPoint, Access, nor any other significant application software. These programs must be purchased, either by themselves or as part of Microsoft Office.

  If your old computer, running Windows 7, came up with one or more of them, it was because the seller who sold delivered as part of the package he has sold, not because this version of Windows came with it. Sellers of some, but not all, do the same with Windows 8 computers (but if they do, it is very likely that a trial version).

• Windows Vista cannot open .exe files and rundll32.exe are missing and are not accessible.

  Windows Vista cannot open .exe files and errors occur with rundll32.exe.

  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html
   
  Get the patch exe file by clicking on the page and choose Save target
  As. Can you double click it? Otherwise you can start
  c:\windows\system32\regedit.exe find and right click on it and choose
  Run as administrator. Does this work. Otherwise copy regedit.exe for your
  Desktop and rename the regedit.com. You need show extensions to rename.
   
  That's what help said to show extensions.
   
  Show or hide file name extensions
   
  A file name extension is a set of characters added at the end of a file name
  determine which program should open it. Follow these steps to choose
  If Windows displays these file extensions.
   
  Click to open the Folder Options (in Control Panel).
   
  Click on the view tab, and then, under Advanced settings, do one of the
  Next:
   
  To hide file extensions, select hide them extensions of known file types
  check box, and then click OK.
   
  To view file extensions, clear hide them extensions of known file types
  check box, and then click OK.
   
  Start Regedit, menu file - import and import the downloaded file.
   
   
  --
  ..
  --
  "Leecherous" wrote in message news: 9a998a10-f4f6-433 a - 9 b 55-c051da91f152...
  > Windows Vista cannot open .exe files and errors occur with
  > rundll32.exe.
   
   

• I want to play Freecell and solitaire that came with my PC, but I get this error: "Windows cannot open this file: free cell.exe.mui.»

  Can help please I want to play freecell and solitaire that came with my pc but I get this error message... Why would he do that? How can I solve this problem?

  original title: windows cannot open this file: free cell.exe.mui.

  Hello

  1. don't you make changes to the computer?

  These can help you:

  Method 1: Perform a system restore

  To get the procedure perform system restore, open the site mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 2: Clean boot

  For the procedure to place the computer in a clean boot, open the site mentioned below

  http://support.microsoft.com/kb/929135.

  Note: To set the computer back to start normally, use the step 7 in the same link.

  Method 3: Check the new user account

  Open the site mentioned below for steps to create a new user account

  http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account.

  I hope this helps.

• Cannot open .exe files and the desktop icons appear as the white sheet

  Original title: Iopening programs

  Cannot open exe files. Removed several programs and all the desktop icons changed to a white sheet with a picture of a computer. Get error install disc insert message "for HP photo and image to reload.

  Hello

  ·         What are the programs that you have removed from the system?

  Method 1:

  I suggest you follow the steps mentioned in the article below.

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

  http://support.Microsoft.com/kb/923077/en-us

  Method 2:

  I suggest you do a system restore to the point when the system worked very well and see if the problem is resolved. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084/en-us

  Method 3:

  Perhaps, your user account is damaged. I suggest to create a new user account and check if the problem persists. Follow the steps mentioned in the article below.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783/en-us

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• C:\ProgrammeFiles\Java\jreb\lib\deploy\jqs\ff\...... \.. \.. \bin\jqsnotify.exe. "Windows cannot open file, path or specified device. May not be the appropriate permissions for access you to them. »

  C:\ProgrammeFiles\Java\jreb\lib\deploy\jqs\ff\...... \.. \.. \bin\jqsnotify.exe.

  Hello

  ·        When you get the error message when you try to open any application or randomly?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        You are the administrator of the system?

  Jqsnotify.exe is a Java Quick Starter process. By default, the location of the file is C:\ProgramFiles\Java\jre6\bin\jqsnotify.exe and the file size is 48 KB.

  By default, the jqsnotify.exe process loads automatically when you start your system. However, jqsnotify.exe is not an essential process and can be easily loaded manually if necessary.

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I suggest you to set permissions for the folder and check if the problem persists. Follow the steps mentioned in the article below.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/?kbid=308421

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Word or excel file does not open on gives Vista error: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  Word or excel file does not open on gives Vista error: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  Whenever I click on a word or document it opens excel excel but it gives an error message: windows cannot open c:\users... Make sure you typed the name correctly and try again.

  I can open the document that after selecting the file only in excel or word blank document by clicking on the windows logo & choose the file and click on open.

  I need immediate assistance. I tried windows service pack 2 updates, but nothing works. Can anyone help?

  Please repost your question in the Discussion of the Office group at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.office.misc&lang=en&cr=US where the Word and Excel experts will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have win 7 Ultimate edition and windows cannot open the hidden files and folders.

  I have win 7 ultimate, windows cannot open hidden files and folders.plz give me the solution

  Hello

  Please see the thread below for a possible solution (applicable to Windows 7):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/show-hidden-files-and-folders-option-not-working/4d6d7b29-8382-4798-AB43-49ccbfd109bf